Companion volume for MEA Aeroskills Training Package Skill Sets by purpose Release 2.0

Similar documents
Case for Change

Certificate IV Aeroskills (Mechanical) MEA The largest CASR and EASA Part 147 approved Maintenance Training Organisation in Australia.

Certificate IV Aeroskills (Avionics) MEA The largest CASR and EASA Part 147 approved Maintenance Training Organisation in Australia.

Diploma of Aeroskills (Avionics) MEA50115 CASR Part 66 B2 licence

Certificate IV Aeroskills (Mechanical) Fixed-Wing, Gas-Turbine MEA40715

Cert II in Aircraft Line Maintenance MEA20515 CASR Part 66 A licence

Aviation MRO Skill Future

An advisory circular may also include technical information that is relevant to the rule standards or requirements.

Aerospace Education and Training Industry Reference Committee MEA Aeroskills Training Package. Business Case. November 2016

Grant of approvals to persons engaged in overhaul, major repairs of components and accessories of aircraft, engines and their systems.

October 2007 ISSUE AND RENEWAL OF AIRCRAFT MAINTENANCE ENGINEER S LICENSE

Subject: Issue of AME licenses, its classification and experience requirements.

Aviation Maintenance Technology

NZQA unit standard version 2 Page 1 of 7. Apply knowledge of aircraft radio systems to the certification of aeronautical maintenance

Advisory Circular. Trade Standards for Personnel Working in Approved Maintenance Organizations

NZQA unit standard version 3 Page 1 of 5. Apply knowledge of avionics to the certification of aeronautical maintenance

BECOME AN EASA QUALIFIED AIRCRAFT MAINTENANCE ENGINEER

Your success is our goal. Rely on our engineering.

Part 63 CAA Consolidation 22 June 2006 Flight Engineer Licences and Ratings

OVERSEAS TERRITORIES AVIATION REQUIREMENTS (OTARs)

Aircraft Maintenance Engineer Licensing

AIR NAVIGATION ORDER

NZQA unit standard version 3 Page 1 of 5. Apply knowledge of air law to the certification of aeronautical maintenance

made under regulations and of the Civil Aviation Safety Regulations 1998.

(Non-legislative acts) REGULATIONS

Official Journal L 362. of the European Union. Legislation. Non-legislative acts. Volume December English edition. Contents REGULATIONS

NEWSLETTER. CASR Part 145 AMO FAR Part 145 AMO

Aircraft Maintenance Organisations - Certification. Contents

FIJI AERONAUTICAL INFORMATION CIRCULAR

Online Handbook Part-66 AML

B.S. PROGRAM IN AVIATION TECHNOLOGY MANAGEMENT Course Descriptions

So you want to be an inspector?

Civil Aviation Order (Exemption from the provisions of the Civil Aviation Regulations 1988 certain ultralight aeroplanes) Instrument 2015

HARTZELL PROPELLER INC. SERVICE LETTER Propellers Propeller - Abnormal Vibration or Grease Leakage

CASR Part 66 Regulatory Implementation

Official Journal of the European Union REGULATIONS

Aeroskills. Section 2: Sector reports

Acceptable Means of Compliance (AMC) and. Guidance Material (GM) CASR Part 42

Opspecs Revision status TABLE OF CONTENTS, LIST OF EFFECTIVE PAGES, AND RATINGS AUTHORITY. Page revision

Part 145. Aircraft Maintenance Organisations Certification. CAA Consolidation. 10 March Published by the Civil Aviation Authority of New Zealand

Boeing 707. Overhaul & Repair Capabilities. USAerospacetn.com. U.S. Aerospace Corp. FAA Certified Part 145 Repair Station License USCR533K

Final decision on consistency of the qualification: National Consistency Confirmed

ROYAL CANADIAN AIR CADETS PROFICIENCY LEVEL ONE INSTRUCTIONAL GUIDE SECTION 1 EO C WATCH HOW IT S MADE SEGMENTS PREPARATION

Becoming a licensed aircraft maintenance engineer

AERONAUTICS AERONAUTICS 199. and maintenance of software application programs, and requires a supporting minor in an application area.

EXPORT AIRWORTHINESS APPROVALS

Aircraft Maintenance Personnel Licensing

Overseas Territories Aviation Circular OTAC Type Acceptance Certificates. United Kingdom. Issue 1 2 November Effective: On issue GENERAL

CERTIFICATE OF AIRWORTHINESS ISSUE

FAA FAR Part 21, Subpart F SO DIFFERENT TO CASR PART 21, SUBPART F

Consideration will be given to other methods of compliance which may be presented to the Authority.

CAPABILITIES LISTING INTRODUCTION

Reporting Instructions FILING REQUIREMENTS

AO Date to go on the website: 13 April 2017

Update to. Practical Test Standards Aviation Mechanic For General, Airframe and Powerplant April 2014

OFFICE OF DIRECTOR GENERAL OF CIVIL AVIATION TECHNICAL CENTRE, OPP SAFDARJANG AIRPORT, NEW DELHI

Advisory Circular (AC)

Subpart H. 2042/2003

Supplement No. 17 published with Gazette No. 22 dated 25 October, THE AIR NAVIGATION (OVERSEAS TERRITORIES) ORDER 2007, S.I No.

OVERSEAS TERRITORIES AVIATION REQUIREMENTS (OTARs)

Delegations will find attached document D034510/03 ANNEXES I to III.

SR Technics Training Services

STATUTORY INSTRUMENTS. S.I. No. 855 of 2004 IRISH AVIATION AUTHORITY (AIR TRAFFIC SERVICE SYSTEMS) ORDER, 2004

TANZANIA CIVIL AVIATION AUTHORITY AIR NAVIGATION SERVICES INSPECTORATE. Title: CONSTRUCTION OF VISUAL AND INSTRUMENT FLIGHT PROCEDURES

STATUTORY INSTRUMENTS. S.I. No. 856 of 2004 IRISH AVIATION AUTHORITY (AIR TRAFFIC CONTROL STANDARDS) ORDER, 2004

AIRCRAFT MAINTENANCE MECHANIC PROGRAMME

Advisory Circular. Canada and United States Bilateral Aviation Safety Agreement Maintenance Implementation Procedures

Advisory Circular. 1.1 Purpose Applicability Description of Changes... 2

For the purposes of this guidance material the following definitions are used:

Part 43 CAA Consolidation 30 October 2017 General Maintenance Rules

Acceptable Means of Compliance (AMC) and. Guidance Material (GM) CASR Part 66. Licences to Certify for Maintenance of Aircraft

Qualification Details

NZQA registered unit standard version 2 Page 1 of 9. Demonstrate flying skills for an airline transport pilot licence (aeroplane)

Operations Specifications

MHT Technical Publications and Training

CIVIL AVIATION REQUIREMENTS SECTION 2 AIRWORTHINESS SERIES L PART V 20 th JANUARY, 1992 EFFECTIVE: FORTHWITH

ASSEMBLY 35TH SESSION PLENARY. Statements by delegations of Contracting States and of Observers INDONESIAN AIRWORTHINESS SYSTEMS

MODEL AERONAUTICAL ASSOCIATION OF AUSTRALIA

Advisory Circular. Land Use and Jurisdictional Issues at Aerodromes

An advisory circular may also include technical information that is relevant to the standards or requirements.

AIRWORTHINESS ADVISORY CIRCULAR

NZQA registered unit standard version 2 Page 1 of 7. Demonstrate competence for a Category B flight instructor rating

AMC THE OPERATORS MAINTENANCE INSPECTION PROGRAMME (M.I.P.)

Skills Training WSQ Code Course Title Duration (days)

CAREERS SNAPSHOT AVIATION AND MARITIME TAFE NSW STRATEGY TAFENSW.EDU.AU

REGULATIONS OF THE CIVIL AVIATION BOARD NUMBER 75 ON PRIVILEGES OF HOLDERS OF PILOT, AIR TRAFFIC CONTROLLER

Part 101 Gyrogliders and Parasails, Unmanned Aircraft (Including Balloons), Kites, and Rockets Operating Rules

MANDATORY OCCURRENCE REPORTING

Preparatory Course in Business (RMIT) SIM Global Education. Bachelor of Applied Science (Aviation) (Top-Up) RMIT University, Australia

Operations Specifications

787 Design for Maintainability

1. Citation, commencement and interpretation

2.1 Private Pilot Licence (Aeroplane/Microlight)

Guidelines for Life Limited Part (LLP) Movement History Sheet

Seychelles Civil Aviation Authority. EU-OPS 1 and JAR-OPS 3 Subpart K and L Compliance Document

NZQA registered unit standard version 2 Page 1 of 6

Section M. Airline Transport Pilot s Licence (Aeroplanes)

Higher National Unit Specification. General information for centres. Unit code: DR04 34

AOPA may require to see this completed syllabus before issuing the Flying Companion s Course Certificate.

Type Acceptance Report

Transcription:

Companion volume for MEA Aeroskills Training Package Skill Sets by purpose Release 2.0

These materials were developed by in association with the Commonwealth Government through the Department of Education and Training 2015 Commonwealth of Australia. With the exception of the Commonwealth Coat of Arms, the Department s logo, any material protected by a trade mark and where otherwise noted, all material presented in this document is provided under a Creative Commons Attribution-No Derivative Works 3.0 Australia licence. Disclaimer This work is the result of consultations with Australian industry participants. It is a collaborative view and does not necessarily represent the view of Department of Education and Training or any specific body. For the sake of brevity it may omit factors which could be pertinent in particular cases. While care has been taken in the preparation of this material, Department of Education and Training and the original developer do not warrant that any licensing or registration requirements specified here are either complete or upto-date for your State or Territory. Department of Education and Training and the original developer do not accept any liability for any damage or loss (including indirect and consequential loss) incurred by any person as a result of relying on the information contained in this material. The Commonwealth, through Department of Education and Training, does not accept any liability to any person for the information or advice (or the use of such information or advice) which is provided in this material or incorporated into it by reference. The information is provided on the basis that all persons accessing this material undertake responsibility for assessing the relevance and accuracy of its content. No liability is accepted for any information or services which may appear in any other format. No responsibility is taken for any information or services which may appear on any linked websites. Published by: Release Date: 5 August, 2015 For further information about this Companion Volume or any other work being undertaken by Manufacturing Skills Australia (MSA), please visit: www.mskills.org.au Level 3, 104 Mount Street North Sydney NSW 2060 T: 02 9955 5500 F: 02 9955 8044 E: info@mskills.org.au W: www.mskills.org.au

Companion volume for MEA Aeroskills Training Package - Skill Sets by purpose Background The aviation industry is highly regulated and work performed must often be on the basis of specific task approval by either a Regulator or the organisation operating within specific regulatory requirements. In addition, the certification of work and the release of aircraft to service after, in the Civil Aviation Safety Authority (CASA) regulatory system, must be performed by an individual with the applicable licence that contains the privileges relevant to the aircraft type and task. Such approvals are covered by a large number of Skill Sets that are contained in this Companion Volume and sorted by the purpose of the Skill Set. Skill Sets have also been developed to enable individuals with allied trade qualifications to attain competencies required for the grant of approvals to repair and overhaul items of aeronautical product (). The MEA Skill Sets are presented in separate sections that relate to their purpose, as below. Release 1: April 2015 Section 1 contains Skill Sets applicable to individuals with relevant allied trade Certificate III or Certificate IV qualifications that provide competencies required for employment in aviation component workshops operating under either the CASA or the Australian Defence Force (ADF) regulatory systems. Section 2 contains Skill Sets that meet CASA requirements for the removal of exclusions from B1 and B2 aircraft engineer licences, and for the grant of an A licence to holders of a Certificate IV in Aeroskills or a B2 licence. Section 3 contains Skill Sets that meet CASA requirements for the grant of authorisations to individuals working in CASR Part 145 organisations, and where applicable to individuals working under the ADF regulatory system (DEFAUST 9022). Release 2: August 2015 Section 4 contains Skill Sets that meet CASA requirements for the grant of Small Aircraft Licence Additional Ratings and for the progression from Small Aircraft Licence to a full B1.1, B1.3 or B2 licence required for large aircraft.

Table of contents Companion volume for MEA Aeroskills Training Package - Skill Sets by purpose... 3 Background... 3 SECTION 1...10 Aviation Maintenance Workshop Skill Sets...10 Avionics...10 Skill Set AMW001 Electrical component repair/overhaul...10 Skill Set AMW002 Mechanical and electro-mechanical instrument component repair/overhaul...11 Skill Set AMW003 Aircraft display, control and distribution system component repair/overhaul...12 Skill Set AMW004 Oxygen system component repair/overhaul...12 Skill Set AMW005 Aircraft radio frequency communication and navigation system component repair/overhaul 13 Skill Set AMW006 Aircraft pulse system component repair/overhaul...13 Skill Set AMW007 Aircraft audio and visual system and reproducer repair/overhaul...14 Mechanical...15 Skill Set AMW008 Hydraulic system component repair/overhaul...15 Skill Set AMW009 Electro-hydraulic component repair/overhaul...15 Skill Set AMW010 Pneumatic system component repair/overhaul...16 Skill Set AMW011 Electro-pneumatic component repair/overhaul...16 Skill Set AMW012 Fuel system component repair/overhaul...16 Skill Set AMW013 Gas turbine engine air inlet and compressor module/component repair/overhaul...17 Skill set AMW014 Gas turbine engine combustion section module/component repair/overhaul...17 Skill Set AMW015 Gas turbine engine turbine and exhaust module/component repair/overhaul...18 Skill Set AMW016 Gas turbine engine ancillary section module/component repair/overhaul...18 Skill Set AMW017 Piston engine disassembly for repair/overhaul...19 Skill Set AMW018 Repair and/or overhaul aircraft piston engine cylinder assembly...19 Skill Set AMW019 Repair and/or overhaul aircraft piston engine crankcase assembly...20 Skill Set AMW020 Reassemble aircraft piston engines...20 Skill Set AMW021 Assemble aircraft piston engine quick engine change unit...20 Skill Set AMW022 Test aircraft piston engines after repair or overhaul...21 Skill Set AMW023 Propeller repair/overhaul...21 Skill Set AMW024 Rotary wing dynamic component repair/overhaul...22 Skill Set AMW025 Mechanical system component repair/overhaul...22 Skill Set AMW026 Composite structure...23 SECTION 2...24 AIRCRAFT MAINTENANCE ENGINEER LICENCE SKILL SETS...24 Skill Sets for Removal of B1 and B2 Licence Exclusions...24 Skill Set LME001 Electrical B1.1 Licence Exclusions E1 and E4 Removal...25 Skill Set LME002 Electrical B1.1 Licence Exclusions E1 and E4 Removal (small aircraft with gas turbine engine)..25 Skill Set LME003 Electrical B1.2, B1.3 or B1.4 Licence Exclusions E1 and E4 Removal...26 Skill Set LME004 Electrical B1.2 or B1.4 Licence Exclusions E1 and E4 Removal (small aircraft/helicopters)...26 Skill Set LME005 Electrical B2 Licence Exclusions E1 and E4 Removal...27

Skill Set LME006 Electrical B2 Licence Exclusions E1 and E4 Removal (small aircraft or helicopters)...27 Skill Set LME007 Airframe B1.1 Licence Exclusion E2 Removal...27 Skill Set LME008 Airframe B1.1 Licence Exclusion E2 Removal (small aircraft with gas turbine engine)...28 Skill Set LME009 Airframe B1.2 Licence Exclusion E2 Removal...29 Skill Set LME010 Airframe B1.2 Licence Exclusion E2 Removal (working on small aircraft)...30 Skill Set LME011 Airframe B1.3 and B1.4 Licence Exclusion E2 Removal...30 Skill Set LME012 Airframe B1.4 Licence Exclusion E2 Removal (working on basic helicopters)...31 Skill Set LME013 Power Plant B1.1 Licence Exclusion E3 Removal...32 Skill Set LME014 Power Plant B1.2 Licence Exclusion E3 Removal...32 Skill Set LME015 Power Plant B1.2 Licence Exclusion E3 Removal (working on small aircraft)...33 Skill Set LME016 Power Plant B1.3 Licence Exclusion E3 Removal...33 Skill Set LME017 Power Plant B1.4 Licence Exclusion E3 Removal...33 Skill Set LME018 Power Plant B1.4 Licence Exclusion E3 Removal (working on basic helicopters)...34 Skill Set LME019 Instrument B1 Licence Exclusions E5 and E7 Removal...34 Skill Set LME020 Instrument B1.2 and B1.4 Licence Exclusions E5 and E7 Removal (small aircraft/helicopters) 35 Skill Set LME021 Instrument B2 Licence Exclusions E5 and E7 Removal...35 Skill Set LME022 Instrument and Radio B1 Licence Exclusion E6 Removal...36 Skill Set LME023 Instrument and Radio B1.2 and 1.4 Licence Exclusion E6 Removal (small aircraft/helicopters)...36 Skill Set LME024 Instrument and Radio B2 Licence Exclusion E6 Removal...37 Skill Set LME025 Instrument and Radio B2 Licence Exclusion E6 Removal (non-type rated aircraft/helicopters)...38 Skill Set LME026 Radio B1 Licence Exclusion E8 Removal...38 Skill Set LME027 Radio B1.2 and B1.4 Licence Exclusion E8 Removal (working on small aircraft/helicopters)...39 Skill Set LME028 Radio B2 Licence Exclusion E8 Removal...39 Skill Set LME029 Radio B2 Licence Exclusion E8 Removal (non-type rated aircraft and helicopters)...40 Skill Set LME030 Airframe B1 Licence Exclusion E9 and E43 Removal...40 Skill Set LME031Airframe B1 Licence Exclusion E10 Removal...40 Skill Set LME032 Radio B2 Licence Exclusion E11 Removal...41 Skill Set LME033 Airframe/Engine B1.1 and B1.2 Licence Exclusion E12 Removal...41 Skill Set LME034 Airframe B1 Licence Exclusion E13 Removal...42 Skill Set LME035 Airframe B1 Licence Exclusion E14 Removal...42 Skill Set LME036 Airframe B1.1 and B1.3 Licence Exclusion E15 Removal...42 Skill Set LME037 Airframe B1.1 Licence Exclusion E15 Removal...43 Skill Set LME038 Airframe B1.1 Licence Exclusion E16 Removal...43 Skill Set LME039 Airframe B1.2 Licence Exclusion E16 Removal...44 Skill Set LME040 Radio B2 Licence Exclusion E18 Removal...45 Skill Set LME041 Radio B2 Licence Exclusion E19 Removal...45 Skill Set LME042 Radio B2 Licence Exclusion E20 Removal...45 Skill Set LME043 Radio B2 Licence Exclusion E21 Removal...46 Skill Set LME044 Radio B2 Licence Exclusion E22 Removal...46 Skill Set LME045 Radio B2 Licence Exclusion E23 Removal...47

Skill Set LME046 Radio B2 Licence Exclusion E24 Removal...47 Skill Set LME047 Radio B2 Licence Exclusion E25 Removal...48 Skill Set LME048 Radio B2 Licence Exclusion E26 Removal...48 Skill Set LME049 Instrument B2 Licence Exclusion E27 Removal...48 Skill Set LME050 Instrument B2 Licence Exclusion E28 Removal...49 Skill Set LME051 Instrument B2 Licence Exclusion E29 Removal...49 Skill Set LME052 Instrument B2 Licence Exclusion E30 Removal...50 Skill Set LME053 Instrument B2 Licence Exclusion E31 Removal...50 Skill Set LME054 Electrical B2 Licence Exclusion E32 Removal...51 Skill Set LME055 Engine B1.2 or 1.4 Licence Exclusions E33 and E38 Removal...51 Skill Set LME056 Electrical/Instrument/Radio B2 Licence Exclusion E34 Removal...51 Skill Set LME057 Airframe B1.1 or B1.2 Licence Exclusion E35 Removal...52 Skill Set LME058 Engine B1.2 or B1.4 Licence Exclusions E36 and E37 Removal...52 Skill Set LME059 Engine B1.2 or B1.4 Licence Exclusions E36 and E37 Removal (small aircraft/helicopters)...53 Skill Set LME060 Airframe B1.1 or B1.3 Licence Exclusions E39 Removal...53 Skill Set LME061 Airframe B1.2 or B1.4 Licence Exclusion E39 Removal (small aircraft/helicopters)...54 Skill Set LME062 Airframe B1 Licence Exclusion E40 Removal...54 Skill Set LME063 Airframe - B1 Licence Exclusion E41 Removal...54 Skill Set LME064 Airframe B1 Licence Exclusion E42 Removal...55 Skill Set LME065 Electrical B1 Licence Exclusion E44 Removal...55 Skill Sets for Grant of A Licence to Holders of Certificate IV in Aeroskills or B2 Licences...57 Skill Sets for Grant of A Licence to Holders of Certificate IV...57 Skill Set LME066 Units of competency for A1 licence if Certificate IV in Aeroskills (Mechanical) is held...57 Skill Set LME067 Units of competency for A2 licence if Certificate IV in Aeroskills (Mechanical) is held...57 Skill Set LME068 Units of competency for A3 licence if Certificate IV in Aeroskills (Mechanical) is held...58 Skill Set LME069 Units of competency for A4 licence if Certificate IV in Aeroskills (Mechanical) is held...59 Skill Set LME070 Units of competency for A1 licence if Certificate IV in Aeroskills (Avionics) is held...59 Skill Set LME071 Units of competency for A2 licence if Certificate IV in Aeroskills (Avionics) is held...60 Skill Set LME072 Units of competency for A3 licence if Certificate IV in Aeroskills (Avionics) is held...60 Skill Set LME073 Units of competency for A4 licence if Certificate IV in Aeroskills (Avionics) is held...61 Skill Sets for Grant of A Licence to Holders of B2 Licences...61 Skill Set LME074 Units of competency for A1 licence if a B2 licence is held...61 Skill Set LME075 Units of competency for A2 licence if a B2 licence is held...62 Skill Set LME076 Units of competency for A3 licence if a B2 licence is held...62 Skill Set LME077 Units of competency for A4 licence if a B2 licence is held...62 SECTION 3...63 Skill Sets For Individual Maintenance Authorisations...63 Aircraft Maintenance Task Authorisations...63 Skill Set MTA001 Aircraft egress system...63 Skill Set MTA002 In-flight entertainment system...63 Skill Set MTA003 Borescope inspection approval...64

Skill Set MTA004 Aircraft composite structure repair/modification using hot and cold bonding...64 Skill Set MTA005 Aircraft composite structure repair/modification using cold bonding only...65 Skill Sets for Aircraft Welding Authorisations...65 Skill Set MTA006 Aircraft welding using the gas welding process aluminium alloys...66 Skill Set MTA007 Aircraft welding using the gas welding process magnesium alloys...66 Skill Set MTA008 Aircraft welding using the gas welding process carbon and low alloy steels...67 Skill Set MTA009 Aircraft welding using the gas welding process corrosion and heat resisting steels...67 Skill Set MTA010 Aircraft welding using the gas welding process nickel alloys...68 Skill Set MTA011 Aircraft welding using the gas welding process copper based alloys...69 Skill Set MTA012 Aircraft welding using the gas welding process titanium alloys...69 Skill Set MTA013 Aircraft welding using the braze welding process - aluminium alloys...70 Skill Set MTA014 Aircraft welding using the braze welding process - magnesium alloys...70 Skill Set MTA015 Aircraft welding using the braze welding process - carbon and low alloy steels...71 Skill Set MTA016 Aircraft welding using the braze welding process - corrosion and heat resisting steels...71 Skill Set MTA017 Aircraft welding using the braze welding process - nickel alloys...72 Skill Set MTA018 Aircraft welding using the braze welding process - copper based alloys...72 Skill Set MTA019 Aircraft welding using the braze welding process - titanium alloys...73 Skill Set MTA020 Aircraft welding using the gas metal arc welding process - aluminium alloys...73 Skill Set MTA021 Aircraft welding using the gas metal arc welding process - magnesium alloys...74 Skill Set MTA022 Aircraft welding using the gas metal arc welding process - carbon and low alloy steels...75 Skill Set MTA023 Aircraft welding using the gas metal arc welding process-corrosion and heat resisting steel...76 Skill Set MTA024 Aircraft welding using the gas metal arc welding process - nickel alloys...76 Skill Set MTA025 Aircraft welding using the gas metal arc welding process - copper based alloys...77 Skill Set MTA026 Aircraft welding using the gas metal arc welding process - titanium alloys...78 Skill Set MTA027 Aircraft welding using the gas tungsten arc welding process - aluminium alloys...79 Skill Set MTA028 Aircraft welding using the gas tungsten arc welding process - magnesium alloys...79 Skill Set MTA029 Aircraft welding using the gas tungsten arc welding process - carbon and low alloy steels...80 Skill Set MTA030 Aircraft welding using gas tungsten arc welding process - corrosion and heat resisting steel...81 Skill Set MTA031 Aircraft welding using the gas tungsten arc welding process - nickel alloys...82 Skill Set MTA032 Aircraft welding using the plasma arc welding process - aluminium alloys...82 Skill Set MTA033 Aircraft welding using the plasma arc welding process - magnesium alloys...83 Skill Set MTA034 Aircraft welding using the plasma arc welding process - carbon and low alloy steels...84 Skill Set MTA035 Aircraft welding using the plasma arc welding process - corrosion and heat resisting steels...85 Skill Set MTA036 Aircraft welding using the plasma arc welding process - nickel alloys...85 Skill Set MTA037 Aircraft welding using the plasma arc welding process - copper based alloys...86 Skill Set MTA038 Aircraft welding using the plasma arc welding process - titanium alloys...87 Skill Set MTA039 Aircraft welding using the manual metal arc welding process - aluminium alloys...88 Skill Set MTA040 Aircraft welding using the manual metal arc welding process - magnesium alloys...88 Skill Set MTA041 Aircraft welding using the manual metal arc welding process - carbon and low alloy steels...89 Skill Set MTA042 Aircraft welding using manual metal arc welding process - corrosion and heat resisting steels 90 Skill Set MTA043 Aircraft welding using the manual metal arc welding process - nickel alloys...91

Skill Set MTA044 Aircraft welding using the manual metal arc welding process - copper based alloys...92 Skill Set MTA045 Aircraft welding using the manual metal arc welding process - titanium alloys...92 Skill Sets for NDT Authorisations...94 Skill Set MTA046 Liquid penetrant inspection approval for aerospace...94 Skill Set MTA047 Magnetic particle inspection approval for aerospace...94 Skill Set MTA048 Eddy current inspection approval for aerospace...95 Skill Set MTA049 Ultrasonic inspection approval for aerospace...96 Skill Set MTA050 Radiographic inspection approval for aerospace...96 Skill Set MTA051 Basic visual liquid dye penetrant inspection approval for aerospace...97 Skill Set MTA052 Basic magnetic particle inspection approval for aerospace...98 Skill Set MTA053 Basic eddy current inspection approval for aerospace...98 Skill Set MTA054 Ultrasonic thickness testing inspection approval for aerospace...99 Skill Set MTA055 Basic radiographic inspection approval for aerospace...99 Skill Sets for Aircraft Component Electroplating Authorisations... 100 Skill Set MTA056 Electroplate aeronautical product component parts... 100 Skill Set MTA057 Produce anodised film on aluminium alloy... 100 Skill Set MTA058 Metal spray aeronautical product component parts... 101 Skill Sets for Aircraft Machining Authorisations... 101 Skill Set MTA059 Machine aeronautical product component parts (general)... 101 Skill Set MTA060 Grind aeronautical product component parts... 102 Skill Set MTA061 Precision jig boring of aeronautical product component parts... 102 Skill Set MTA062 Complex milling of aeronautical product component parts... 103 Skill Set MTA063 Machine aeronautical product component parts using horizontal and/or vertical boring machines... 103 Skill Set MTA064 Machine aeronautical product component parts using NC/CNC machines... 104 Skill Set MTA065 Machine aeronautical product component parts using NC/CNC machining centres... 104 Skill Set MTA066 Machine plastic aeronautical product component parts... 105 Skill Set MTA067 Aeronautical product component parts metal spinning lathe operations... 105 Skill Sets for Aircraft Tyre Retreading Authorisations... 106 Skill Set MTA068 Aircraft tyre retreading (basic)... 106 Skill Set MTA069 Aircraft tyre retreading (advanced)... 106 SECTION 4... 107 Skill Sets for small aircraft licences... 107 Skill Set SAL001 B1 small aircraft elementary... 107 Skill Set SAL002 Mechanical/Avionic B1and B2 Electrical systems multi-generator Rating 2... 108 Skill Set SAL003 Mechanical B1.2 Wooden structures - Rating 3... 108 Skill Set SAL004 Mechanical B1.2 Fabric surfaces - Rating 4... 108 Skill Set SAL005 Mechanical B1 Hydraulic systems - Rating 5... 109 Skill Set SAL006 Mechanical B1 Vapour cycle air conditioning systems -Rating 6A... 109 Skill Set SAL007 Mechanical B1.1 and B1.3 Air cycle air conditioning systems - Rating 6B... 109 Skill Set SAL008 Mechanical/Avionics B1 and B2 Oxygen systems Rating 8... 110 Skill Set SAL009 Mechanical B1.1 and B1.2 Pressurisation and pneumatic systems Rating 10... 110

Skill Set SAL010 Mechanical B1.3 and B1.4 Helicopter powered flight control systems Rating 11... 110 Skill Set SAL011 Mechanical B1 Boosted Induction Systems - Rating S... 111 Skill Set SAL012 Mechanical B1.2 Constant speed and variable pitch propeller - Rating V... 111 Skill Set SAL013 Avionics B2 Electrical 1 Rating... 112 Skill Set SAL014 Avionics B2 Instrument 1 Rating... 112 Skill Set SAL015 Avionics B2 Radio 1 Rating... 113 Skill Set SAL016 Avionics B2 Autopilot and flight control systems Aeroplane Rating 12... 113 Skill Set SAL017 Avionics B2 Autopilot and flight control systems Helicopter - Rating 13... 114 Skill Set SAL018 Avionics B2 Glass cockpit - Rating 14... 114 Skill Set SAL019 Avionics B2 Navigation systems Rating 15... 114 Skill Set SAL020 Avionics B2 Flight management systems Rating 16... 115 Skill Set SAL021 Avionics Inertial navigation systems - Rating 17... 115 Skill Set SAL022 Avionics B2 Secondary radar - Rating 18... 116 Skill Set SAL023 Avionics B2 Weather radar - Rating 19... 116 Skill Set SAL024 Avionics B2 Cockpit voice recorder - Rating 20... 116 Skill Set SAL025 Avionics B2 Flight data recorder systems - Rating 21... 117 Skill Set SAL026 Avionics B2 High frequency radio systems - Rating 22... 117 Skill Set SAL027 B1.1 Removal of small aircraft limitation... 117 Skill Set SAL028 B1.3 Removal of small aircraft limitation... 118 Skill Set SAL029 B2 Removal of small aircraft limitation... 119 Skill Set SAL030 of a B1.2 licence by holders of a B1.1 small aircraft licence... 120 Skill Set SAL031 of a B1.3 licence by holders of a B1.1 small aircraft licence... 121 Skill Set SAL032 of a B1.4 licence by holders of a B1.1 small aircraft licence... 121 Skill Set SAL033 of a B1.1 small aircraft licence by holders of a B1.2 licence... 121 Skill Set SAL034 of a B1.3 small aircraft licence by holders of a B1.2 licence... 122 Skill Set SAL035 of a B1.4 licence by holders of a B1.2 licence... 122 Skill Set SAL036 of a B1.1 small aircraft licence by holders of a B1.3 small aircraft licence... 123 Skill Set SAL037 of a B1.2 licence by holders of a B1.3 small aircraft licence... 123 Skill Set SAL038 of a B1.4 licence by holders of a B1.3 small aircraft licence... 124 Skill Set SAL039 of a B1.1 small aircraft licence by holders of a B1.4 licence... 124 Skill Set SAL040 of a B1.2 licence by holders of a B1.4 licence... 125 Skill Set SAL041 of a B1.3 small aircraft licence by holders of a B1.4 licence... 125

SECTION 1 Aviation Maintenance Workshop Skill Sets The Skill Sets in this section have been developed as a means of qualifying individuals from allied trades to work in specific areas of aircraft component repair and overhaul and gain applicable task approvals under both the CASA and ADF regulatory systems. They could also be used to qualify individuals with Aeroskills AME qualifications to work on component repair and overhaul. Allied trades are as follows: Allied trades related to avionic and electrical component work are electro-technology, telecommunications and automotive. A metals and engineering background may also qualify where competencies held and work experience is in the electrical and/or electronic fields. Allied trades related to mechanical component work are automotive and metals and engineering where competencies held and work experience is in mechanical fields. Many of the units of competency listed in the Skill Sets have the following common core Aeroskills units as prerequisites: MEA101 Interpret work health and safety practices in aviation MEA103 Plan and organise aviation work activity MEA105 Apply quality standards applicable to aviation processes MEA107 Interpret and use aviation industry manuals and specifications MEA109 Perform basic hand skills, standard trade practices and fundamentals in aviation Much of the general content in these units is also covered by units that will be held by individuals in allied trades. To facilitate the movement of such individuals to aviation component workshop employment the parts of these units that are peculiar to Aeroskills have been identified and have been included in MEA145 Conversion from allied trades for employment in aviation workshops which is listed in each Skill Set. Through attainment of MEA145 individuals may be deemed to be competent in each of the listed common core units. Avionics Skill Set AMW001 Electrical component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on electrical component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA Skill Sets Companion Volume Release 2, July 2015 Page 10 of 125

MEA201 MEA246 MEA260 MEA261 MEA262 MEA286 Remove and install miscellaneous aircraft electrical hardware/ Fabricate and/or repair aircraft electrical hardware or parts Use electrical test equipment Use electronic test equipment Modify/repair single layer printed circuit boards Repair or overhaul aircraft electrical/electro-mechanical The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on electrical component repair and overhaul. Skill Set AMW002 Mechanical and electro-mechanical instrument component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on mechanical and electro-mechanical instruments repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA201 Remove and install miscellaneous aircraft electrical hardware/ MEA246 Fabricate and/or repair aircraft electrical hardware or parts MEA252 Test, align and troubleshoot synchro and servo system MEA260 Use electrical test equipment MEA261 MEA262 MEA284 Use electronic test equipment Modify/repair single layer printed circuit boards Repair or overhaul aircraft instrument system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on mechanical and electro-mechanical instruments repair and overhaul. MEA Skill Sets Companion Volume Release 2, July 2015 Page 11 of 125

Skill Set AMW003 Aircraft display, control and distribution system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on aircraft display, control and distribution system component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 MEA201 MEA246 MEA252 MEA260 MEA261 MEA262 MEA283 Conversion from allied trades for employment in aviation workshops Remove and install miscellaneous aircraft electrical hardware/ Fabricate and/or repair aircraft electrical hardware or parts Test, align and troubleshoot synchro and servo system Use electrical test equipment Use electronic test equipment Modify/repair single layer printed circuit boards Repair or overhaul aircraft display, control and distribution system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on display, control and distribution system component repair and overhaul. Skill Set AMW004 Oxygen system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on oxygen system component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA287 Repair or overhaul aircraft oxygen system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on oxygen system component repair and overhaul. MEA Skill Sets Companion Volume Release 2, July 2015 Page 12 of 125

Skill Set AMW005 Aircraft radio frequency communication and navigation system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on aircraft radio frequency communication and navigation system component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA201 MEA246 MEA260 MEA261 MEA262 MEA285 Remove and install miscellaneous aircraft electrical hardware/ Fabricate and/or repair aircraft electrical hardware or parts Use electrical test equipment Use electronic test equipment Modify/repair single layer printed circuit boards Repair or overhaul aircraft radio frequency communication and navigation system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on radio frequency communication and navigation system component repair and overhaul. Skill Set AMW006 Aircraft pulse system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on aircraft pulse system component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA201 Remove and install miscellaneous aircraft electrical hardware/ MEA246 MEA260 MEA261 MEA262 Fabricate and/or repair aircraft electrical hardware or parts Use electrical test equipment Use electronic test equipment Modify/repair single layer printed circuit boards MEA282 Repair or overhaul aircraft pulse system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. MEA Skill Sets Companion Volume Release 2, July 2015 Page 13 of 125

requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on pulse system component repair and overhaul Skill Set AMW007 Aircraft audio and visual system and reproducer repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on audio and visual system and reproducer repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA201 MEA246 MEA260 MEA261 MEA262 Remove and install miscellaneous aircraft electrical hardware/ Fabricate and/or repair aircraft electrical hardware or parts Use electrical test equipment Use electronic test equipment Modify/repair single layer printed circuit boards MEA288 Repair or overhaul aircraft audio and visual systems and reproducers The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on audio and visual system and reproducer repair and overhaul. MEA Skill Sets Companion Volume Release 2, July 2015 Page 14 of 125

Mechanical Skill Set AMW008 Hydraulic system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on hydraulic component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA380 Repair and/or overhaul aircraft hydraulic system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on hydraulic system component repair and overhaul Skill Set AMW009 Electro-hydraulic component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on electro-hydraulic component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 MEA201 MEA246 MEA260 MEA380 Conversion from allied trades for employment in aviation workshops Remove and install miscellaneous aircraft electrical hardware/ Fabricate and/or repair aircraft electrical hardware or parts Use electrical test equipment Repair and/or overhaul aircraft hydraulic system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on electro-hydraulic component repair and overhaul. MEA Skill Sets Companion Volume Release 2, July 2015 Page 15 of 125

Skill Set AMW010 Pneumatic system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on pneumatic component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA381 Repair and/or overhaul aircraft pneumatic system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on pneumatic system component repair and overhaul Skill Set AMW011 Electro-pneumatic component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on electro-pneumatic component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA201 Remove and install miscellaneous aircraft electrical hardware/ MEA246 MEA260 Fabricate and/or repair aircraft electrical hardware or parts Use electrical test equipment MEA381 Repair and/or overhaul aircraft pneumatic system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on electro-pneumatic component repair and overhaul. Skill Set AMW012 Fuel system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on fuel system component repair and overhaul. MEA Skill Sets Companion Volume Release 2, July 2015 Page 16 of 125

Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA382 Repair and/or overhaul aircraft fuel system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment in aircraft component workshops on fuel system component repair and overhaul. Skill Set AMW013 Gas turbine engine air inlet and compressor module/component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on gas turbine engine air inlet and compressor module/component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA383 Repair and/or overhaul gas turbine engine air inlet and compressor and/or modules The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on gas turbine engine air inlet and compressor module/component repair and overhaul. Skill set AMW014 Gas turbine engine combustion section module/component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on gas turbine engine combustion section module/component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 MEA384 Conversion from allied trades for employment in aviation workshops Repair and/or overhaul gas turbine engine combustion section and/or modules MEA Skill Sets Companion Volume Release 2, July 2015 Page 17 of 125

The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on gas turbine engine combustion section module/component repair and overhaul. Skill Set AMW015 Gas turbine engine turbine and exhaust module/component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on gas turbine engine turbine and exhaust module/component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA385 Repair and/or overhaul gas turbine engine turbine and exhaust section The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on gas turbine engine turbine and exhaust module/component repair and overhaul. Skill Set AMW016 Gas turbine engine ancillary section module/component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on gas turbine engine ancillary section module/component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA386 Repair and/or overhaul gas turbine engine ancillary section The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component MEA Skill Sets Companion Volume Release 2, July 2015 Page 18 of 125

workshops on gas turbine engine ancillary section module/component repair and overhaul. Skill Set AMW017 Piston engine disassembly for repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on aircraft piston engine disassembly for repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA392 Disassemble aircraft piston engines The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on piston engine disassembly. Skill Set AMW018 Repair and/or overhaul aircraft piston engine cylinder assembly Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on the repair and overhaul of aircraft piston engine cylinder assembly. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA393 Repair and/or overhaul aircraft piston engine cylinder assembly The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on piston engine cylinder assembly component repair and overhaul. MEA Skill Sets Companion Volume Release 2, July 2015 Page 19 of 125

Skill Set AMW019 Repair and/or overhaul aircraft piston engine crankcase assembly Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on the repair and overhaul of aircraft piston engine crankcase assembly. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA394 Repair and/or overhaul aircraft piston engine crankcase assembly The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on piston engine crankcase assembly component repair and overhaul. Skill Set AMW020 Reassemble aircraft piston engines Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on reassembly of aircraft piston engines. Units MEA108 Complete aviation industry documentation MEA145 MEA395 Conversion from allied trades for employment in aviation workshops Reassemble aircraft piston engines The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on piston engine repair and overhaul. Skill Set AMW021 Assemble aircraft piston engine quick engine change unit Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on assembly of aircraft piston engine quick engine change units. MEA108 Complete aviation industry documentation MEA Skill Sets Companion Volume Release 2, July 2015 Page 20 of 125

Units MEA145 Conversion from allied trades for employment in aviation workshops MEA396 Assemble aircraft piston engine quick engine change unit The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on assembly of piston engine quick engine change units. Skill Set AMW022 Test aircraft piston engines after repair or overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on testing of aircraft piston engines after repair or overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA392 Disassemble aircraft piston engines MEA393 Repair and/or overhaul aircraft piston engine cylinder assembly MEA394 Repair and/or overhaul aircraft piston engine crankcase assembly MEA395 Reassemble aircraft piston engines MEA396 Assemble aircraft piston engine quick engine change unit MEA397 Test aircraft piston engines after repair or overhaul The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on testing of piston engines after repair or overhaul. Skill Set AMW023 Propeller repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on propeller repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA389 Repair and/or overhaul propellers MEA Skill Sets Companion Volume Release 2, July 2015 Page 21 of 125

The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on propeller repair and overhaul. Skill Set AMW024 Rotary wing dynamic component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on rotary wing dynamic component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 MEA390 Conversion from allied trades for employment in aviation workshops Repair and/or overhaul rotary wing dynamic The Aeroskills Training Package MEA11 offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on rotary wing dynamic component repair and overhaul. Skill Set AMW025 Mechanical system component repair/overhaul Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on mechanical system component repair and overhaul. Units MEA108 Complete aviation industry documentation MEA145 Conversion from allied trades for employment in aviation workshops MEA391 Repair and/or overhaul aircraft mechanical system The MEA Aeroskills Training Package offers a Certificate IV qualification in Aeroskills that includes these units. requirements for employment of individuals with Certificate III or Certificate IV qualifications in an allied trade in aircraft component workshops on mechanical system component repair and overhaul. MEA Skill Sets Companion Volume Release 2, July 2015 Page 22 of 125

Skill Set AMW026 Composite structure Individuals with Certificate III or Certificate IV qualifications in an allied trade who are to be employed in aircraft component workshops on composite structural component repair and overhaul. Units MEA101 Interpret work health and safety practices in aviation MEA103 MEA105 MEA107 MEA108 MEA109 MEA401 MEA405 Plan and organise aviation work activities Apply quality standards applicable to aviation processes Interpret and use aviation industry manuals and specifications Complete aviation industry documentation Perform basic hand skills, standard trade practices and fundamentals in aviation Inspect aircraft structures Repair/modify aircraft composite material structure/ The MEA Aeroskills Training Package offers these units as part of a Certificate IV in Aeroskills (Structures). requirements of CASA for the grant of an approval to perform on aircraft composite structures. MEA Skill Sets Companion Volume Release 2, July 2015 Page 23 of 125

SECTION 2 AIRCRAFT MAINTENANCE ENGINEER LICENCE SKILL SETS Skill Sets for Removal of B1 and B2 Licence Exclusions In the process of transitioning from the CAR 31 aircraft engineer licensing system to the new CASR Part 66 system many existing CAR 31 licence holders have been granted a B1 or B2 licence with a range of exclusions. To provide a mechanism for the removal of these exclusions, the Skill Sets in this Section have been developed in consultation with CASA. For the purpose of exclusion removal, they must be delivered by RTOs that also hold Maintenance Training Organisation status under CASR Part 147. CASA has also issued Airworthiness Advisory Circular AAC 9-66 in which it has been specified that CASA regards the grant of a B1 or B2 licence as signifying that all competencies relating to the specific licence privileges granted are held by the individual. Under these provisions, all holders of a B1 licence may be deemed to hold the following units of competency: MEA101 Interpret work health and safety practices in aviation MEA103 Plan and organise aviation work activity MEA105 Apply quality standards applicable to aviation MEA107 Interpret and use aviation industry manuals and specifications MEA108 Complete aviation industry documentation MEA109 Perform basic hand skills, standard trade practices and fundamentals in aviation MEA301 Perform aircraft flight servicing All holders of a B2 licence may be deemed to hold the following units of competency: MEA101 Interpret work health and safety practices in aviation MEA103 Plan and organise aviation work activity MEA105 Apply quality standards applicable to aviation MEA107 Interpret and use aviation industry manuals and specifications MEA108 Complete aviation industry documentation MEA109 Perform basic hand skills, standard trade practices and fundamentals in aviation MEA201 Remove and install miscellaneous aircraft electrical hardware/ MEA246 Fabricate and/or repair aircraft electrical hardware or parts MEA260 Use electrical test equipment For this reason, the above units are not listed against the Skill Sets where they are specified as prerequisites for listed units. Where any RPL action is required with regard to any of the units of competency listed in the Skill Sets in this Section, RTOs are encouraged to undertake an efficient RPL assessment (in line with CASA guidance in AAC9-66) to determine required gap training (if any) in order to provide an integrated learning program for the units in the applicable Skill Set. MEA Skill Sets Companion Volume Release 2, July 2015 Page 24 of 125

2024 © travelsdocbox.com Privacy Policy | Terms of Service | Feedback