SETS & SUPPORT BAR 354 Plated Copper Bar REL-GSB Pole Mounted Cluster Ground Support Bar Custom Assemblies Available. Tested to ASTM F855 Grade 5 Continuous Current: 400 Amps Fault Current - 15 cycles: 43,000 Amps Fault Current - 30 cycles: 30,000 Amps Penetrating Spike SET FOR OVERHEAD DISTRIBUTION #2 Set = GSOD60X#2 1/0 Set = GSOD60X1/0 2/0 Set = GSOD60X2/0 4/0 Set = GSOD60X4/0 Includes: (10) 1.5" @ Clamp R-GC-1002 (1) Ground Support Bar REL-GSB (1) Screw Ground Rod R-T-GRND (3) Hanger Stud (10) Ferrules & Heatshrink (1) Carry Bag 2629 (60) Ground Cable Yellow Jacketed: (3) x 6 ft. (1) x 12 ft. (1) x 30 ft. Other custom options available. REL-GSB POLE MOUNTED GROUND SUPPORT BAR Hang grounding sets to facilitate lifting of clamps to the conductors Accepts C type and duckbill grounding sets Copper support bar is 11" wide by 4-1/4" deep A Cluster Bar is specified by OSHA as an approved component of equipotential zone grounding systems Weight: 11 lbs. REL-GSB-S POLE MOUNTED GROUND SUPPORT BAR WITH PENETRATING SPIKE Penetrate pole to a depth greater than climbers gaff. (Ref. OSHA Guideline 1910.269 App C) Hang grounding sets to facilitate lifting of clamps to the conductors Accepts C type and duckbill grounding sets Copper support bar is 11" wide by 4-1/4" deep A Cluster Bar is specified by OSHA as an approved component of equipotential zone grounding systems Weight: 11 lbs. Chain Pin REL-GSB-S Pole Mounted Ground Cluster Support Bar with Pole Spike Chain Tension Assembly QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION
QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION ELBOW SET (LOAD BREAK) Includes: 6 ft. 1/0 Yellow Jacketed Cable with elbow (select kv) Bronze "C" Style Clamp R-BGC-.81 Fault Current: 10,000 AMPS @ 10 Cycles ELBOW SETS CABLE SIZE SINGLE PHASE (6') THREE PHASE (3X6') 15kV GES6X1/0-15KV GETS6X1/0-15KV 25kV 35kV (Small Interface) GES6X1/0-25/35SKV GETS6X1/0-25/35SKV 35kV (Large Interface) GES6X1/0-35LKV GETS6X1/0-35LKV Three Phase Sets Also Available. GES6X1/0-15KV BUSHING SET (LOAD BREAK) Includes: 4 ft. 1/0 Yellow Jacketed Cable w/ bushing (select kv) Bronze "C" Style Clamp R-BGC-.81 Fault Current: 10,000 AMPS @ 10 Cycles BUSHING SETS CABLE SIZE SINGLE PHASE (4') THREE PHASE (3X4') 15kV GBS4X1/0-15KV GBTS4X1/0-15KV 25kV 35kV (Small Interface) GBS4X1/0-25/35SKV GBTS4X1/0-25/35SKV GBS4X1/0-15KV GROUND SETS FOR LIVE-FRONT SWITCHES & TRANSFORMERS Fault Rating: 21,000 AMPS @ 15 Cycles GC6X1/0-FC Includes: 4 x 6 ft. 1/0 Clear Cable 4-way Terminal 3 x G33633SJ Al Flat Clamps with Bronze Eyescrew 1 x G33634SJ Al Flat Clamp with Bronze T-Handle GC6X1/0-81 Includes: 3 x 6 ft. 1/0 Clear Cable 3-way Terminal 4 x Bronze "C" Clamps R-BGC-.81 SETS GC6X1/0-BC Includes: 3 x 6 ft. 1/0 Clear Cable 3-way Terminal 4 x Bronze Ball Socket Clamps R-BS-GC GC6X1/0-81 GC6X1/0-BC 355
SETS 76174459 Ground Adapter Device Kit EB100615LB 764015S0 76174459 - GROUND ADAPTER DEVICE KIT The Ground Adapter Device Kit enables application of personal grounds up to a 600 amp separable pre-molded component system when used with a clampstick. MODEL DESCRIPTION QUANTITY WEIGHT 44C Ratchet Wrench w/ Ball & Ring 1 2 lbs. 5900Q Universal Toggle & Spring 1 1 lb. 5900CS Captured Socket w/ Friction Balls 1 8 oz. 9206GAS Elbow Connector Tool w/ Inserts 1 2.5 lbs. 1725001 Ground Stud 3 2.5 lbs. B1715 Protective Bag w/ Zipper 1 1 lb. SINGLE GROUNDED BUSHING SET The Single Grounded Bushing Set is a single lead made from 6 feet of 1/0 cable. The bushing set consists of 3 bushing assemblies connected together with 3-foot leads to a common connection, and 10 feet from common connection to ground. The conductor is made of 1/0 clear jacketed copper stranded cable. The ground clamp can be applied with a clampstick. Sets come complete with bag; single leads do not. All sets are rated for 10 ka for 10 cycles. Other lengths and configurations are available. MODEL DESCRIPTION WEIGHT EB100615 Dead Break, Single, 15 kv 8 lbs. EB1021015 Dead Break, Set, 15 kv 20 lbs. EB100615LB Load Break, Single, 15 kv 9 lbs. EB100625LB Load Break, Single, 25 kv 22 lbs. EB1021015LB Load Break, Set, 15 kv 10 lbs. EB1021025LB Load Break, Set, 25 kv 23 lbs. 200 AMP GROUND BUSHINGS WITH CONNECTIONS Ground Bushings with Connections (parking stands for J boxes or padmounts) provide a safe, convenient ground for elbows and a positive test to ensure a de-energized elbow. MODEL DESCRIPTION WEIGHT 764015SO Dead Break, 15 kv 1 lb. 764150015LSO Load Break, 15 kv 2 lbs. 764150025LSO Load Break, 25 kv 4 lbs. ELBOW SET The Elbow Grounding Set includes a single lead made from 6 feet of 1/0 cable. This set consists of 3 elbow assemblies connected together with 3-foot leads to a common connection, and 10-feet from a common connection to ground. The conductor is made of 1/0 clear jacketed copper stranded cable. A ground clamp can be applied with a clampstick. Sets are rated for a maximum fault current of 10,000 amps for 10 cycles. Sets come complete with bag; single leads do not. Other lengths and configurations are available. 356 MODEL DESCRIPTION WEIGHT ES100615 Single, 15 kv 1 lb. ES100615LB Load Break, 15 kv 2 lbs. ES100625LB Load Break, Single, 25/35 kv 4 lbs. ES1021015 Dead Break, Set, 15 kv 2 lbs. ES1021015LB Load Break, Set, 15 kv 4 lbs. ES1021025LB Load Break, Set, 25/35 kv 2 lbs. ES1LY635 Load Break, Single, 35 kv 4 lbs. QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION ES3LY635 Load Break, Set, 35 kv 2 lbs.
QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION R-T-GRND MODEL DESCRIPTION WT. R-T-GRND Screw Ground Rod 7.75 lbs. R-T-GRND is comparable to Chance G3370. Truck-grounding set available, ask your Reliable representative for information. TGK500X#2 TRUCK SET Provides means to drain off capacitance or static charges For winch trucks and aerial devices Flat -face clamp is for secure attachment to the truck bed at an area cleaned for electrical contact C-type clamp is for secure attachment to ground rod NOTE: A truck grounding set should not be considered an adequate method of protection to personnel against conductor contact. TRUCK SET CONSISTS OF MODEL DESCRIPTION QUANTITY R-T-GRND Screw Ground Rod 1 R-BFC-1.5 1.5" Flat Face Ground Clamp 1 R-GC-1.25B 1.25" C-Type Ground Clamp 1 #2YGC #2 Copper Grounding Cable 50 feet R#2TF *Shrouded Alum. Ferrules 2 C-16-10-11 Storage Reel 1 SGCR SPRING REWIND REEL Independently tested to 43 kva for 30 cycles Helps meet OSHA requirements for vehicle grounding Fast, convenient, automatic spring rewind Ratchet mechanism locks the reel Built-in cable hoop Internal rotary device Dimensions: 17.19 in. H x 16.5 in. W x 10.12 in. D TEMPORARY GROUND ROD The Reliable Screw Ground Rod provides a temporary ground where a system ground is not available. When installed, the 6' spiraled ground rod develops less resistance than straight ground rods. The reusable Ground Rod is copper clad. The helix (spiral), handle, and wing nut are bronze. TGK500X#2 Truck Grounding Set TRUCK MODEL REEL CAPACITY SIZE LENGTH WEIGHT SGCR10-17-19 #2 75 ft. 43 lbs. SGCR10-17-19 1/0 75 ft. 43 lbs. SGCR10-17-19 2/0 65 ft. 43 lbs. SGCR Spring Rewind Grounding Reel 357
CLAMPS AVAILABLE FROM RELIABLE R-GC-2.5A C TYPE (THREADED) Aluminum Body Smooth Jaws Capacity: 2.4" # 6-2 IPS ASTM: Type I / Class A / Grade 5H Salisbury 1923 R-BGC-1.25 C TYPE (THREADED) Bronze Body Smooth Jaws Capacity: 1.25" # 6-1033 KCM ACSR ASTM: Type I / Class A / Grade 5 Salisbury 1897 Chance C6002271 CLAMPS 358 R-GC-2AC R-GC-2BC Threaded Through Connection R-GC-2A OR 2B (SHOWN) C TYPE (THREADED) Aluminum Body (B) Serrated (A) Smooth Jaws Capacity: 2" # 6-3000 KCM ACSR ASTM: Type I / Class B / Grade 5H (See also R-GC-2AC & 2BC models) Salisbury 20882 Chance T6000658 Hastings 10375 R-GC-1002 C TYPE (THREADED) Aluminum Body Serrated Jaws Capacity: 1.5 # 6-1431 KCM ACSR ASTM: Type I / Class B / Grade 5 Salisbury 1895 Hastings 21575 R-GC-1.25B C TYPE (THREADED) Aluminum Body Serrated Jaws Capacity: 1.25" #8-1033 kcmil ACSR ASTM: Type I / Class B / Grade 5 Chance T6002708 R-BGC-.81 C TYPE (DRILLED) Bronze Body Smooth Jaws Capacity:.81" # 6-477 KCM ACSR Current: 250 RMS Amps / 60 Hz ASTM: Type I / Class A / Grade 2 Chance T6000466 R-BFC-1.5 FLAT (THREADED) Bronze Body Serrated Jaws Capacity: 1.5 ASTM: Type III / Class B / Grade 5 (See also R-BFC-1.5E w/ Eye Screw) Chance C6002231 & C6002232 Hastings 21608 R-FC-1006 FLAT (THREADED) Bronze Body Serrated Jaws Capacity: 1.5 Flat or Square Current: 300 RMS Amps / 60 Hz ASTM: Type III / Class B / Grade 3 (See also R-FC-1006E w/ Eye Screw) Salisbury 1814 In an effort to fill the needs of a changing utility market Reliable continues to release new clamp designs regularly. QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION
QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION CLAMPS AVAILABLE FROM RELIABLE R-DB-1.1A DUCK BILL (THREADED) Aluminum Body Smooth Jaws Cap:.16-1.1" # 6-795 KCM ACSR ASTM: Type I / Class A / Grade 5 Salisbury 21030, Chance C6001734 Hastings 10476 R-BS-S REL-BS-6 Optional Ball Studs R-DB-1.66B DUCK BILL (THREADED) Aluminum Body Serrated Jaw Cap:.16-1.66" # 6-1590 MCM ACSR ASTM: Type I / Class B / Grade 5 Salisbury 1853 Chance C6000197 R-BS-GC BALL SOCKET CLAMP (THREADED) Bronze Body 1" Ball Diameter Current: 400 Amps /60 Hz ASTM: Type I / Class A / Grade 5 Salisbury 21190 Chance C600-2101 R-GR-PS PARKING STUD Bronze Salisbury 21754 Chance G3627 Hastings 13210 1/2-13UNC THREADED PART DIE R-#2TF 165 R-1/0TF 165 R-2/0TF 165 R-4/0TF 167 REL-BUS-6.62 C TYPE (THREADED) Aluminum Smooth, Flat Lower Jaw Capacity: 6.12 IPS 0.4"- 6.62" ASTM: Type I / Class A / Grade 5 Salisbury 2991 COPPER FERRULES Lock Washer & 5/8-11 UNC Nut For Substation Buses - Round, Square, Rectangle, or H Section Copper Plain Ferrule PLAIN PART DIE R-#2PF 165 R-1/0PF 165 R-2/0PF 165 R-4/0PF 167 R2427 - DOUBLE HANGER STUD Salisbury 2427 R1928 - SINGLE HANGER STUD (NOT SHOWN) Salisbury 1928 CLAMPS 359
20882 T6000658 C6002281 10375 MODEL 20882 T6000658 C6002281 10375 CONST. / THREAD / WT. Al / Acme / 2.1 lbs. Al / Acme / 2.2 lbs. Al / Acme / 1.7 lbs. Al / Acme / 1.8 lbs. JAW STYLE Serrated (U) Curved (L) Smooth (U) Curved (L) Smooth (U) Curved (L) Serrated (U) Flat (L) CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz FAULT CURRENT @ CYCLE 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 ASTM DESIGNATION 5H Grade 5 (Class B) 5H Grade 5 (Class A) Grade 5 (Class A) Grade 5 (Class B) MAIN LINE RANGE - MIN. #6 (0.16 in.) #6 (0.16 in.) #6 (0.16 in.) 4 Solid.18 Dia. MAIN LINE RANGE - MAX. 3000 MCM ACSR (2 in.) 2" O.D. Bus 2" O.D. Bus 2" O.D. Bus CLAMPS 360 1895 MODEL 1895 C6001743 21575 T6002708 CONST. / THREAD / WT. Al / Acme / 1.5 lbs. Al / Fine / 1.5 lbs. Al / Acme / 1.5 lbs. Al / Acme / 1.25 lbs. JAW STYLE Serrated (U) Flat (L) Smooth (U) Curved (L) Serrated (U) Curved (L) Serrated (U) Curved (L) CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz FAULT CURRENT @ CYCLE 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 ASTM DESIGNATION Grade 5 (Class B) Grade 5 (Class A) Grade 5 (Class B) Grade 5 (Class B) MAIN LINE RANGE - MIN. #6 -.16" Dia. #6 (0.16 in.) #6 (0.16 in.) #8 Sol. Cu. (0.128") MAIN LINE RANGE - MAX. 1431 KCM ACSR (1.5 in.) C6001743 1000 kcmil Cu. 1590 kcmil ACSR (1.5 in.) 21575 1.50" Dia. Cable 1033 kcmil ACSR (1.25 in.) QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION T6002708
QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION C6002276 C6002271 21307 T6000466 MODEL C6002276 C6002271 21307 T6000466 CONST. / THREAD / WT. Al / Acme / 1.25 lbs. Bronze / Fine / 2.0 lbs. Bronze / Acme / 1.7 lbs. Bronze / Fine / 1.5 lbs. JAW STYLE Serrated (U) Curved (L) Smooth (U) Curved (L) Serrated (U) Curved (L) Smooth (U) Flat (L) CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 250 RMS Amps / 60Hz FAULT CURRENT @ CYCLE 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 21kA@15 / 15kA@30 ASTM DESIGNATION Grade 5 (Class B) Grade 5 (Class A) Grade 5 (Class B) Grade 2 (Class A) MAIN LINE RANGE - MIN. #8 Sol. Cu. (0.128 in.) #6 Sol. Cu. (0.16 in.) #6 (0.16 in.) #6 (0.16 in.) MAIN LINE RANGE - MAX. 1033 kcmil ACSR (1.25 in.) 1033 kcmil ACSR (1.25 in.) 1.033 MCM ACSR (1.25 in.) 477 MCM ACSR (0.81 in.) 1853 21030 C6000197 C60001734 MODEL 1853 21030 C6000197 C6001734 CONST. / THREAD / WT. Al / Acme / 2.2 lbs. Al / Fine / 1.5 lbs. Al / Acme / 1.5 lbs. Al / Fine / 1.2 lbs. JAW STYLE Serrated Smooth Serrated Smooth CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz FAULT CURRENT @ CYCLE 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 ASTM DESIGNATION Grade 5 (Class B) Grade 5 (Class A) Grade 5 (Class B) Grade 5 (Class A) MAIN LINE RANGE - MIN. #6 (0.16 in.) #6 (0.16 in.) #6 (0.16 in.) #6 (0.16 in.) MAIN LINE RANGE - MAX. 1590 MCM ACSR (1.66 in.) 795 MCM ACSR (1.1 in.) 950 kcmil Cu. 1510 kcmil ACSR (1.506") 566 kcmil Cu. 900 kcmil ACSR (1.162") CLAMPS 361
4345 21608 C6002231 C6002232 MODEL 4345 21608 C6002231 C6002232 CONST. / THREAD / WT. Al / Acme / 2.1 lbs. Bronze / Acme / 2.4 lbs. Bronze / Acme / 2.0 lbs. Bronze / Acme / 2.0 lbs. JAW STYLE Serrated, Flat Serrated Serrated Serrated, Flat CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz FAULT CURRENT @ CYCLE 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 ASTM DESIGNATION Grade 5 (Class B) Grade 5 (Class B) Grade 5 (Class B) Grade 5 (Class B) MAIN LINE RANGE - MIN..06" #6 (0.16 in.) 1/8 in. 1/8 in. MAIN LINE RANGE - MAX. 1.26 in. Dia., 1.5 in. Flat 1.5 in. Flat 1.5 in. Angles 1.5 in. Flat 1.5 in. Angles 1.5 in. Flat CLAMPS 362 G33632 G33633SJ MODEL G33632 G33633SJ G33634SJ CONST. / THREAD / WT. Bronze / Fine / 1.5 lbs. Al / Fine / 1.6 lbs. Al / Fine / 1.5 lbs. JAW STYLE Serrated, Flat Serrated, Flat Serrated, Flat QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION G33634SJ CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz FAULT CURRENT @ CYCLE 27kA@15 / 20kA@30 27kA@15 / 20kA@30 27kA@15 / 20kA@30 ASTM DESIGNATION Grade 3 (Class B) Grade 3 (Class B) Grade 3 (Class B) MAIN LINE RANGE - MIN. 1/8 in. 1/8 in. 1/8 in. MAIN LINE RANGE - MAX. 1.5 in. Angles 1.5 in. Flat 1.5 in. Angles 1.5 in. Flat 1.5 in. Angles 1.5 in. Flat
QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION 2991 TP6AR2T20-S G3369 C6000337 MODEL 2991 TP6AR2T20-S G3369 C6000337 CONST. / THREAD / WT. Al / Acme / 6.9 lbs. Al / Fine Al / Acme / 5.2 lbs. Al / Acme / 6.0 lbs. JAW STYLE Smooth (U) Flat (L) Smooth (U) Flat (L) Smooth (U) Flat (L) Smooth (U) Flat (L) CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz FAULT CURRENT @ CYCLE 43kA@15 / 30kA@30 47kA@15 / X/R@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 ASTM DESIGNATION Grade 5H (Class A) Grade 5H (Class A) Grade 5 (Class A) Grade 5 (Class A) MAIN LINE RANGE - MIN..4 in. 2.5 in. 4/0 Str. Cu. (0.500 in.) 3.5 in. O.D. MAIN LINE RANGE - MAX. 6.12 in. I.P.S / 6.62 in. 6.5 in. 4 in. x 4 in. Square 4.5 in. O.D. Bus 6-5/8 in. O.D. MODEL C6001732 22675 21703 01-M-037 CONST. / THREAD / WT. Al / Acme / 3.2 lbs. Al / Fine / 2.4 lbs. Al / Acme / 1.1 lbs. Al / Fine / 1.4 lbs. JAW STYLE Serrated Ball Stud & C Ball Stud & C Ball Stud & C CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz FAULT CURRENT @ CYCLE 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 ASTM DESIGNATION Grade 5 (Class B) Grade 5H (Class A) Grade 5 (Class A) Grade 5 (Class A) MAIN LINE RANGE - MIN. #2 Cu. (.258 in.) #6 (.16 in. dia.) #6 (.16 in. dia.) # 8 (.16 in. dia.) MAIN LINE RANGE - MAX. C6001732 2.88 in. 22675 1 in. Ball Stud (1.5 in. dia.) 21703 556 MCM (.86 dia.) 20 mm Ball Stud 795 (1.13 in.) 1 in. Ball Stud 01-M-037 CLAMPS 363
Rotating Ground Adapters GR253X Bronze Vise-type Connectors GR43BS2 Ball-stud Connectors ROTATING GROUND ADAPTERS FOR REELS TESTED AND MEETS ASTM F 855 STANDARD Provide system protection while conductor is pulled from reels for stringing operations By design, the system adds conductor grounding but does not replace other grounding practices System serves as intended path to ground for static discharge and accidental energizing from downed lines, equipment contact, adjacent conductors and lightning INSTALLATION Rotating Ground Adapter slides on reel mandrel and three locking bolts secure it Outer collar contact connects to the end of the conductor from inside the reel Adapter s inner collar contact connects to a permanent or screw-in ground rod (not included) MODEL ASTM GRADE FAULT RATING PIPE DIA. MAX. CONNECTOR TYPE CONNECTOR RANGE WEIGHT GR253X Grade 1 14kA @ 15 cycles 10kA @30 cycles 3-3/16" Bronze Vise Type 3 Sol. to 4/0 Str. 9.8 lbs. GR43BS2 Grade 5 43kA @15 cycles 30kA @30 cycles 2-11/16" Two 1"-dia. Ball Studs See Ball Stud Clamp in Chance Cat. Section 3000 12.75 lbs. ROTATING / NEUTRAL / BREAKAWAY 7603 5/8" BAC 625-300 Continuous current rating of 250 amps Fault rated to ASTM Grade 1 (14 KA for 15 cycles) Pin 5/8" 7603 NEUTRAL JUMPER ASSEMBLY The Concentric Neutral Jumper Assembly is used for bonding purposes on non-jacketed cable. Installed across a portion of cable to be cut, repaired, or spliced. The assembly is left in place until the concentric neutral is spliced. Neutral Jumper Assembly Features and Benefits Includes: (2) Ground clamps, 4 feet of 1/0 clear jacketed flexible copper cable. The concentric neutral ground clamp is spring pressured. Other lengths are available. 7603C Clamp only w/ wing nut Cable Dia. 3/4" to 2" BAC 625-300 BREAKAWAY BONDING CONNECTOR Designed to break away at 300 lbs Electrical rating 10kA @ 10 cycles 5/8-11 UNC threaded ends Bonding assemblies available on request. 364 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION
QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION CABLES (ASTM F855) CABLE SIZE CONTINUOUS CURRENT / FAULT CURRENT @ 15 CYCLES Other jacket colors available upon request. YELLOW JACKET CLEAR JACKET GREEN JACKET MODEL # OF STRANDS MODEL # OF STRANDS MODEL # OF STRANDS #2 200 A / 14kA #2YGC 665 #2CLEAR 665 #2GGC 665 1/0 250 A / 21kA 1/0YGC 1045 1/0CLEAR 1050 1/0GGC 1045 2/0 300 A / 21kA 2/0YGC 1330 2/0CLEAR 1323 2/0GGC 1330 4/0 400 A / 43kA 4/0YGC 2109 4/0CLEAR 2107 4/0GGC 2109 FERRULES TIN PLATED UNSHROUDED THREADED COPPER FERRULES MODEL CABLE SIZE DIE R-#2TFT #2 U165 R-1/0TFT 1/0 U165 R-2/0TFT 2/0 U165 R-4/0TFT 4/0 U167 UNSHROUDED THREADED COPPER FERRULES MODEL CABLE SIZE DIE R-#2TF #2 U165 R-1/0TF 1/0 U165 R-2/0TF 2/0 U165 R-4/0TF 4/0 U167 UNSHROUDED PLAIN COPPER FERRULES MODEL CABLE SIZE DIE R-#2PF #2 U165 R-1/0PF 1/0 U165 R-2/0PF 2/0 U165 R-4/0PF 4/0 U167 20887 6" HEAT SHRINK TUBE Clear heat shrink for all grounding cables. 1632-GR-3V 16" X 18" GROUNDS WARNING FLAG Identification marker for temporary grounds. It has reflective striping for night time visibility. The marker is secured onto the ground with velcro strap. It has the word "Grounds" Stenciled onto the marker. Weight 7 oz. SHROUDED THREADED COPPER FERRULES MODEL CABLE SIZE DIE "A" DIE "B" C600-2622 #2 U165 U166 C600-2623 1/0 U165 U168 C600-2624 2/0 U165 UL C600-2625 4/0 U166 UL Identification Marker with Reflective Striping 1632-GR-3V CABLES / FERRULES 365
20817 STATIC DISCHARGE STICK The Static Discharge Stick is designed to safely remove the static charge after de-energizing. This tool is pre-assembled and includes a brass alloy U hook, closed cell foam-filled tubular fiberglass switch stick made in accordance with ASTM Standard F711. Static discharge sticks have 6 feet of copper grounding cable attached to a Salisbury 1814 flat jaw, grade 3, bronze serrated clamp with strain relief. STATIC DISCHARGE STICK MODEL DESCRIPTION WEIGHT 20817 Static discharge stick 4' length 8 lbs. 22629 Static discharge stick w/ universal attachment 1' length 38 lbs. TOOL HOLDER SALCOR Tool Holders secure tools to trailers, compartments and tool rooms. Great for holding rescue hooks and static discharge sticks. 12 per package. 22629 Static Discharge Stick w/ Universal Attachment 1192 1.25 I.D. Tool holder Weight: 3.5 lbs. DISCHARGE STICK & BALL STUDS 21191 21228 21236 24082 21192 24087 BALL STUD Long and Short Ball Stud, and the offset NEMA Pad Ball Studs are made from a Tin-Plated Copper Alloy. They each have a 1inch ball. THREADED SHORT AND LONG BALL STUD - The short stud is used conventionally, while the long stud may also be used with C or Duckbill clamps that have a jaw width of 2.75 inch or less. 1/2"-13 UNC x 2" TH OFFSET NEMA PAD BALL STUD - Standard bolt hole spacing. Available in long and short lengths. INTERNAL THREAD BALL STUD - Tapped for 1/2-13 UNC bolt having a length of at least 1 inch. MODEL DESCRIPTION DIM. 21191 Ball Stud Short 4.38 in. 21192 Ball Stud Long 6.13 in. 21228 Offset NEMA Pad Short 5.13 in. x 1.5 in. 24082 Offset NEMA Pad Long 7 in. x 1.5 in. 24082 Internal Thread Ball Stud 4 in. 21236 Cover for Ball Stud 366 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION
QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION SLIP-RESISTANT (BLACK) EQUI-MAT PROTECTIVE GROUND GRID Complies with OSHA 1910.269 for equipotential requirements near vehicles, underground gear, overhead switches and in substations Meets ASTM F2715 Standard Way to establish an equipotential zone for a lineworker For standing on during various energized and de-energized work practices Equipotential Zone. Temporary protective grounds SHALL be placed at locations and arranged to prevent each employee from being exposed to hazardous differences in electrical potential. Portable, easy to use, maintain and store Consists of a high-ampacity tinned-copper-braid cable sewn in a grid pattern onto a vinyl/polyester fabric Cable terminals permit connecting mat s grid in series with an electrical ground and subject system component or vehicle Mat may be folded and stored in a tool bag Slip-Resistant Equi-Mat Personal Protective Ground Grid Each Unit includes Ground Grid, Long Ball Stud & Instructions. SLIP-RESISTANT MATERIAL For rain, snow and ice conditions Napped surface offers superior footing NOTE: For dry conditions, consider the Standard Orange EQUI-MAT Personal Protective Ground Grid, available in the same sizes & kits MODEL SIZE WEIGHT PSC6003345 58" x 58" 8 lbs. PSC6003346 58" x 120" 13 lbs. PSC6003347 120" x 120" 20 lbs. GMK-2989 - PRE-PACKAGED KIT Each Pre-Packaged Kit includes: 58" x 58" Grounding Grid Ground Assembly 6' x 2 AWG and (2) 3/4 in. Bronze C Clamps Storage Bag GMK-2989 336A & 1590C SERIES TRAVELING GROUND Reduces the possibility of electric shock due to contact with energized conductors Heavy duty units designed for conductors measuring up to 1590MCM (1590C) and 336MCM (336A) Meets the ASTM F885 grade five rating Carrying cases are available, add "8" to part number Replacement parts are available TG250-1625 TRAVELING GROUND Maintain a positive contact from conductor to ground through the use of a ground wire Reversible ground stud which accommodates almost any type of ground clamp Adjustable spring loaded center roller to maintain the correct pressure on the conductor Wire capacity of.250" to 1.625" Aluminum rollers 336A TG250-1625 1590C GROUND GRID / TRAVELING GROUND 367