BEV-TENT COMPONENTS. Made in South Africa

Similar documents
BEV-TENT COMPONENTS. Made in South Africa

BEV-TENT COMPONENTS AGENTS. GAUTENG REB MARKETING-Nick Tel:- (011) Fax:- (011)

FACTORY KNYSNA Tel:- (044) / / Fax:- (044) Cel: Ordering AGENT

CAMPING & OUTDOOR. December 2018 VER 1.0

Lift Handle. Spring Loaded Flush Lift. Locking Hasp. Swivel Hasp (Stamped) Safety Hasp (Stamped) w/fixed Plate PWB-3977S 5/16 2-3/16 3

PARTS LIST CHARGER 2022 ABLT

PARTS LIST COLT COLT HEPA

WRANGLER 1710AB, 2010AB

PARTS LIST eforce Burnisher

READ ME FIRST! IMPORTANT WARNING! ENG. Roof top tent

IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS. Part # A7006

PARTS LIST EXTRACTOR ACCESSORIES

SteadiCam Parts List*

AQUA PRODUCTS MODEL G. Cleaners B-17 ASSORTED AQUA PRODUCTS CLEANERS

Parts Catalog. S-Series Slicer Manual S13. Model:

Exploded views meat slicer: 800S. DEKO Holland bv B Arnhem The Netherlands

EXPLOSIONADO DE PARTES. Lavadoras de importación. Modelo: 7MGHW9100MW1

HARDWARE & FURNITURE. Mattresses Table parts Table legs Hinges Cupboard catches Cupboard catches and handles...

Spare Parts Order Form. Payment Details Cheque Direct Deposit Credit Card Please tick Card Type Visa Mastercard Card Number

ASSEMBLY & CARE INSTRUCTIONS

Parts Catalog Issued: Jul 22, ICCI IH820 Series

Handy Pak Assortments

SERVICE SHEET 34" WALK-BEHIND POWER TROWEL MODEL FT34 (THIS SERVICE SHEET APPLIES TO THE TROWELS WITH SERIAL NUMBER AND AFTER) WARNING

ASSEMBLY & CARE INSTRUCTIONS. 7 x4 TRAILER TENT SERIES 4 9. OPTIONAL SUNROOM Wall and floor kit. OPTIONAL SPARE ROOM Roof, wall and floor kit

SOFT TOP ROOF TENT INSTRUCTION MANUAL

INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL AWNINGS. For trailers & motor homes with straight sides TOOLS REQUIRED

ABS Model Background Stand

HARDWARE AND FURNITURE

FRAMELESS GLASS SLIDING FOLDING SYSTEM Sliding Folding System SPECIALISED SLIDING SYSTEMS

Closet and Specialty Hardware

EXPLOSIONADO DE PARTES

Cabinet Mount Assist Lift n Lock Instructions

Hose Clamps & Fittings

Pallet Feet & Fittings SQUARE

EXPLOSIONADO DE PARTES. Secadora de Importación. Modelo: 7MLGR4634JT2

Handy Pak Assortments Issue June 2013

PARTS CATALOGUE 05/05/2011. (issue 6) DEALER

HINGES & STAYS. Hinges & Stays Large Take-Apart Hinge. Medium Take-Apart Hinge

Bushwakka Safari Weekender Family Off-Road Camping Trailer

PRODOTTI STANDARD PRODOTTI STANDARD

P3000 UNIVERSAL Clamp-On

Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1

SECURITY HARDWARE. Security Hardware

TITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V

The safe & affordable install

C402C / X toilets cassette toilets

CATALOG OF REPLACEMENT PARTS

PROFILE SYSTEM HANDLES, LOCKS, STOPS HANDLE, LOCKS, STOPS 108 MINITEC PROFILE SYSTEM

TOOLING COMPONENTS. tel fax Clamping Kits Step Blocks...7. Driver Studs...

PARTS LIST WRANGLER 2730 DB & 3330 DB

ET600 PARTS LIST MODELS (100), (100H), (400H)

Installation Guide: Round Trampoline

Glass Door Fittings Glass Door Accessories

6. Textile Products. Cargo Restraint Nets. Please feel free to contact us for your projects!

INSTALLATION GUIDELINES

PARTS LIST MODEL M-1 - PIG

A A A T E C H N O L O G Y

Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1

ASSEMBLY GUIDE. Customer Service: INCH² 2-BURNER & 864 INCH² 2-BURNER

Professional Promotion Solutions

PARTS LIST WRANGLER 2625 DB

π H-3505 GARAGE CANOPY PARTS SAFETY uline.com TOOLS NEEDED 10' X 20' X 8'

BR-2250/BR Burnisher. Operator and Parts Manual. Model No.: BR BR-2250 Can. Pac BR BR-2500 Can.

Replacement Pivot Point (Z) Installa on Guide (Part#: ) REPLACEMENT PIVOT POINT (Z) INSTALLATION GUIDE. (Part#: )

Rhino-Rack SUNSEEKER Awning Black

Country. Instruction. Valley.

Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub

Page 92

DWV AND STORMWATER SYSTEMS. Fittings / Pipes

WIRING INSTALLATION. Heat Shrink Tubing. Steel Fish Tapes - 1/8'' wide. Fiberglass Fish Tape / (Black) (Asst colors)

Equipment for the Paper, Film, Foil, Textile & Nonwoven Industries. SCORE CUT HOLDERS Parts & Services

Polyfab Pro. Shade Sail Hardware. When REliablity and durability count

VALUE MOUNTING TAPE 2m x 12mm x 1.2m Roll H EVERYDAY MOUTING TAPE H

Spare parts list ( ) Spare parts list BR 40/10 C

PARTS BOOK CATALOG SIDE HD FLAIL HEADS TRACTOR MID-MOUNT

* * 4023 KR. Step 1 Prepare the Keyed Removable Unit. Not for use on electric or fire rated removable mullions

Rhino-Rack FOXWING ECO Awning 31117

Rhino-Rack FOXWING Awning by OZTENT

HANDLES, LE VERS & CR ANKS

Icelock Ratchet 621 Icelock Lanyard 631 Icelock Valve 641 Icelock Smooth 651

SHOPFITTING. Grooved panel 664. Grooved panel accessories 665. Cash drawers 668. Partition hardware 675. Toilet partitions 686

EDITION

WARDROBE FITTINGS Wardrobe Accessories P Clothes Hanger Accessories P Hangers & Shoe Racks P.

Railing & Wall Mount Storage Systems

4 NEW NEW NEW NEW POPULAR NEW. The Caddy Seating System. Drop-down Pommel. 4 The Caddy Seating Range. 6 Comfort Company. 8 nxt. 10 Lightning.

Assembly and Installation Instructions

READ ME! IMPORTANT WARNING! ENG. Quick Release Tent Mount Kit

Pole Line Hardware. Catalog

Table Legs & Extensions 7.1

CONTENTS DESCRIPTION 1-4 MATERIALS & EQUIPMENT 5 GENERAL DESIGN 6 EFFECT OF SAG ON CABLE STRESS 7 OUTSIDE HAUL CABLE LENGTH 8

Tuf-Lite III Fans 4000KW Series Hub

Your Artificial Lift Experts. Oilfield Equipment. upcglobal.com

Drinkers, Pipes & Fittings

W/ MAGNETIC TAPE ON FACE CENTER W/ MAGNETIC TAPE ON FACE CENTER W/ STEEL TAPE ON FACE BOTTOM L3-1 W/ STEEL TAPE ON FACE BOTTOM

July Camper Range & Features (03) Ask us about our Camper Trailer Finance from 8.5%

Assembly and Installation Instructions

Vanagon Ladder Kit Assembly & Installation Instructions

W & A PARTS MANUAL LEVEE PLOW STANDARD. Model No Blade Model No Blade (Parts Only)

Closet and Specialty Hardware

Operation, Cleaning & Maintenance. For Aluminium Secondary

Transcription:

BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za

BEV-TENT 001 90 deg Elbow Pipe connector (Fits 19mm & 25mm Alu tube) BEV-TENT 002 90 deg Elbow Pipe connector (Fits 22mm Alu tube) BEV-TENT 003 BEV-TENT 004 6mm Nut Cover 8mm Nut Cover BEV-TENT 004(A) 10mm Nut Cover BEV-TENT 004(B) 12mm Nut Cover BEV-TENT 005 16-19mm Suspension Hook BEV-TENT 006 22-25mm Suspension Hook BEV-TENT 007 Rope Slide Large Heavy duty (49mm Pitch) BEV-TENT 008 & 008 (GLOW) Rope Slide Small (45mm Pitch) Page 1

BEV-TENT 009 Tent Pole Clamp (Fits Poles 22mm & 25mm) BEV-TENT 010 (A) Pole Clip on Tee (25mm) BEV-TENT 010 (B) Pole Clip on Tee (22mm) BEV-TENT 011 (A) Pole Eye End (25mm) BEV-TENT 011 (B) Pole Eye End (22mm) Page 2

BEV-TENT 012 (A) Small Push Button Door Catch S/Steel Knob & Guide Bush BEV-TENT 012 (B) Push Button Door Catch Plastic Knob & Guide Bush Colours:- Black, White, Brown, Grey BEV-TENT 012 (C)(3mm thick) Push Button Door Catch Spacer Pad To be used with Door Catch for different door thicknesses BEV-TENT 012 (D) Push Button Door Catch with Face Plate & Knob To be used with Door Catch on thin doors and drawer fronts where screws pull out BEV-TENT 012 (E) Large Push Button Door Catch S/Steel Knob & Guide Bush BEV-TENT 013 Small Aluminium Rope Slide (3 x 6mm dia Holes 26mm pitch outer holes) BEV-TENT 014 Aluminium Rope Slide Angled (3 Holes 28mm pitch outer holes) BEV-TENT 014 (A) Large Aluminium Rope Slide (2 Holes 45mm pitch) Page 3

BEV-TENT 015 (A) Trailer Tent Pivot Point (25mm Pole) BEV-TENT 015 (B) Trailer Tent Pivot Point (19mm Pole) BEV-TENT 016 (A & A1) Tent Pole Spigot with 8mm Alu pin (A) Spigot 42mm long (A1) Spigot 60mm long Fits 25mm Tube (White) BEV-TENT 016 (B & B1) Tent Pole Spigot with 8mm Alu pin (B) Spigot 42mm long (B1) Spigot 60mm long Fits 22mm Tube (White) BEV-TENT 017 (A) S/S (304) D Ring 3mm dia x 20mm wide BEV-TENT 017 (B) S/S (304) D Ring 4mm dia x 25mm wide BEV-TENT 017 S/S (304) D Ring 5mm dia x 40mm wide BEV-TENT 017 (D) S/S (304) D Ring 5mm dia x 50mm wide BEV-TENT 016 (C) Tent Pole Spigot Plastic to fit 25mm tube BEV-TENT 016 (D) Tent Pole Spigot Plastic to fit 22mm tube BEV-TENT 016 (E) Tent Pole Spigot Plastic to fit 19mm tube All Plastic Spigots have 3mm dia 304 S/S wire in the shaft of the spigot Page 4

BEV-TENT 018 Swivelling Door Catch BEV-TENT 018(A) Swivelling Door Catch Spacer Pad 3mm thick BEV-TENT 019(A) Annex Pulley (Plastic Pulley) (Wonderwieletjie) BEV-TENT 019(B) Annex Pulley (Stainless Steel Pulley) (Wonderwieletjie) BEV-TENT 020 Tent Pole Rope Latch BEV-TENT 021 Louvered Vent (ABS Plastic) Fits hole 86mm dia, Outside dia 105mm Colours -: White, Black, Brown & Grey Page 5

BEV-TENT 022 Handles :- 2 Mounting Holes (A) 245mm Long (B) 215mm Long Available in Black & Grey BEV-TENT 022 (C) Handle :- 1 Mounting Hole (C) 245mm Long BEV-TENT 023 Roof Rack Brackets Used with 50mm S/S or Aluminium Tube For canopy roof racks BG 069 Roof Rack Tube End Caps Canopy Roof Rack Complete (S/Steel tube not supplied) Page 6

BEV-TENT 024 (A) 25mm Pole Ball for Socket BEV-TENT 024 (B) 22mm Pole Ball for Socket BEV-TENT 024 (C) Table Bracket with Ball Fits with Square & Round Base Sockets BEV-TENT 025 (A) Square Base Socket with locking ring (Available without locking ring) BEV-TENT 025 (B) Round Base Socket with locking ring (Available without locking ring) Pole Balls, Sockets & Fittings are Available in White, Grey & Black BEV-TENT 025 (B2) Round Base Socket Angled Pad BEV-TENT 025 (C ) Socket Locking Ring Page 7

BEV-TENT 026 2 Leg Straight Connector (To be used with 22mm ID Square Tube) BEV-TENT 027 2 Leg Elbow (To be used with 22mm ID Square Tube) BEV-TENT 028 (A) 3 Leg Tee Piece (Flat) (To be used with 22mm ID Square Tube) BEV-TENT 028 (B) 3 Leg Elbow (Angled) (To be used with 22mm ID Square Tube) Square Tube) BEV-TENT 029 4 Leg Elbow (Angled) (To be used with 22mm ID Square Tube) Page 8

BEV-TENT 032 (A) Window Latch Right BEV-TENT 032 (B) Window Latch Left BEV-TENT 030 Window Stay Short (230mm) Left and Right BEV-TENT 031 Window Stay Long (320mm) Left and Right BEV-TENT 033 Tent Pole Foot Piece To Be used with 22mm & 25mm Tube BEV-TENT 035 Aussie Clamp To Be used with 22mm & 25mm Tube BEV-TENT 037 (A) & (B) Cupboard Stay (Left & Right) Page 9

BEV-TENT 039 White Jack Pad (130mm Square) With Split Pin BEV-TENT 039 Black Jack Pad (130mm Square) With Split Pin BEV-TENT 039(A)White Jack Pad (130mm Square) With Stainless Steel Nut & Bolt BEV-TENT 039(A) Black Jack Pad (130mm Square) With Stainless Steel Nut & Bolt Page 10

BEV-TENT 040 S/S Twisted S Hook BEV-TENT 041 (A) (B) & (C) (A) Straight Spring Steel Peg 200mm x 4.5mm dia (B) Straight Spring Steel Peg 300mm x 4.5mm dia (C) Straight Spring Steel Peg 350mm x 6mm dia BEV-TENT 041 (D) (E) & (F) (D) Storm Spring Steel Peg 240mm x 280mm x 4.5mm dia (E) Storm Spring Steel Peg 240mm x 380mm x 4.5mm dia (F) Storm Spring Steel Peg 300mm x 500mm x 6mm dia BEV-TENT 042 (A) Toggle and Ring set Available in Black or White Nylon Closed BEV-TENT 043 (A-C) Universal fixing bracket or flat hinge 40mm square (Plastic) Available in Black, Brown or White nylon BEV-TENT 044 Stainless Steel Door & Trailer Lid Hinge. Heavy duty 85mm long x 51mm wide with 4 mounting holes. Manufactured from 2mm thick 316 s/s. Closed Open BEV-TENT 045 Stainless Steel Door & Trailer Lid Hinge. Heavy duty 130mm long x 51mm wide with 6 mounting holes. Manufactured from 2mm thick 316 s/s. Open Page 11

BEV-TENT 046(A) 3 Prong Knob Spacer Bush. black or white nylon. BEV-TENT 046 3 Prong Knob. With 10mm dia x 36mm bolt zink plated. Manufactured from black or white ny- ELE 024 S/S D Ring With Hook 4mm dia x 25mm wide. AWPAR 027 S/S (304) Bar Cleat 87mm Long x 6mm dia. BG 012 (A) Quick Release spring clip BG 014 (A) Toestrap Plates for 50mm Webbing BEV 031 Nylon Canopy Fitting BG 014 (B) Toestrap Washer for 25mm Webbing BG 014 (C) Toestrap Domed Washer for 25mm Webbing Page 12

BG BOAT PART COMPONENTS BG 014 (D) Toestrap Plates for 30mm Webbing BG 045 (H) S/Steel Collapsible Fish Plate Saddle Round BG 045 (I) S/Steel Collapsible Fish Plate Saddle Square BG 045 (J) S/Steel Collapsible Fish Plate Saddle Triangular BG 045 (J)(1) S/Steel Triangle to be used with BG 061 (A) Knob 20mm dia Head with 5mm thread x 20mm long BG 061 (A)(1) Knob - 20mm dia Head with BG 061 (B) Knob 40mm dia Head with 6mm thread x 25mm long BG 061 (B)(1) Knob - 40mm dia Head with 6mm Nut BG 061 (C) Knob - 50mm dia Head with 8mm thread x 30mm long BG 061 (C)(1) Knob - 50mm dia Head with 8mm Nut BG 061 (D) Knob - 73mm dia Head with 12mm thread x 30mm long BG 061 (D)(1) Knob - 73mm dia Head with 12mm Nut BG 066 (A) Bar Cleat Small - 150mm Long BG 066 (B) Bar Cleat Large - 200mm Long Page 13 Mad

BG 068 (I) Plastic Eyelets BG 082 (A)(1) Jaw Slide with Eye End BG 082 (A)(2) Jaw Slide only BG 082 (B)(1) Deck Hinge with Eye End BG 082 (A)(3 & 4) Double Jaw Slide With or without Eye End BG 082 (B)(2) Deck Hinge only BG 082 (C) Eye End only BG 082 (D) Side Mount Deck Hinge with Eye End BG 082 (E) Side Mount Deck Hinge only Page 14

BG 085 (B) Andy Hook Medium BG 085 (A) Andy Hook Small BG 085 (C) Andy Hook Large BG 116 (A) Plastic Hinge Small 40mm x 18mm closed BG 116 (B) Plastic Hinge Medium 55mm x 19mm closed BG 116 (C) Plastic Hinge Large 70mm x 25mm closed BG 116 (D) Large Plastic Hinge Heavy Duty 78mm x 43mm closed (Black & White Nylon) BG 116 (E) Plastic Hinge Small 2 Holes 46mm x 24.5mm closed (Black & White Nylon) BG 116 (F) Small Plastic Hinge Heavy Duty 50mm x 44mm closed (Black & White Nylon) BG 140 Plastic Hasp & Staple (Black & White Nylon) Page 15

BG 143 Jiggle Siphon Pump (Plastic) Pipe Size:- 12.5mm ID x 2 meters long BG 143 (C)(1) Hi-Flow Jiggle Siphon Pump (Plastic) Pipe Size:- 19mm ID x 2 meters long BG 151 Lever Lock Tie Down with strap Available with 3m & 5m straps Page 16

BG 175 (1) Door & Cupboard Catch (Female large back mount) BG 175 (2) Door & Cupboard Catch (Female Small side mount) BG 175 (3) Door & Cupboard Catch (Male Standard back mount) BG 175 (4) Door & Cupboard Catch (Male 90 degrees back mount) BG 175 (5) Door & Cupboard Catch Spacer Pad Page 17