Alloy Mallet Stake Puller Stakes Staking Plates Ratchet Straps Sliktop Fibretech Doors Flooring Walls
Alloy Mallet Alloy Mallet The Baytex Alloy Mallet will make light work of securing your stakes into the ground. It s light weight but packs a heavy punch. Key Features Large head diameter virtually emilinates mis-hitting Easy to carry and swing Easy for inexperienced operators to use Less tiring to use even over long periods Alloy head won t chip, burr or damage stakes The alloy head will be kind to your alloy leg extrusions Alloy head means no risk of sparking Specifications Weight: 4.6kg (10lb) Head Dia: 100mm Material: High strength billet alloy Handle: Nylon reinforced fibreglass
Sliktop Sliktop PVC Fabric Conditioner and Cleaner Specially formulated Ph neutral cleaner for all PVC fabrics including Marquees, Tents, Canopies and Sidewalls. Instructions Dillution Rates: Normal 50: 10:1 Spot Clean 1l 20ml 1 Tablespoon 1l 100ml Aprox 1/2 a cup Sliktop is Phosphate free, non toxic and biodegradable by microbial action and provides an excellent cleaning performance while protecting valuable PVC surfaces when used as instructed. Sliktop Ingredients: Alkylbenzene sulphonic acid, coconut diethanolamde, sodium lauryl ether sulphate and urea, dissolved in water. Instructions For Use Normal Clean: Lay out fabric on clean well drained surface Wash thoroughly with 50:1 Sliktop solution using floor mop or soft broom Avoid hash scrubbing or pressure spraying Rinse off with fresh water Hang to dry Fold and store only when thoroughly dry Spot Clean (Prior to regular clean): Use 10:1 Sliktop Solution to remove small areas of dirt or marks (cleaning with Sliktop may reduce but will not remove embedded marks or stains) Finish off with regular clean Always be sure to thoroughly rinse off detergent residue Never store your P.V.C in a damp state Refer to www.baytex.co.nz/sliktop For the Product Safety Data Sheet
Fibretech Doors Fibretech Doors Create a formal entrance way with our Fibretech doors. Stainless kick plates, stainless handles andair springs for soft closing gives class and distinction to your Marquee or Structure. A minimum leg height of 2.4m is required for use of the fibretech doors. Options Double Door Set - 1850mmW x 2050mmH opening size Single Door Set - 95mmW x 2050mmH opening size Emergency Exit Door set with panic mechanism Key Features Quick and easy to install with two people Heavy duty fibreglass finish with wood core construction White painted fibreglass doors are chip and dent resistant Tempered, double glazed French pane glass inserts Automatic door closers fitted as standard Rigid steel and alloy door frame securely holds each door Door frame fully adjusts to fit most marquee and structures Supplied in purpose designed crate for transport and storage Specifications - Double Door Set Double Door Width: 2m Door Height: 2.1m Weight incl crate: 250kg Package Includes: Double door set Door frame and Lintel Base Rails PVC wall infill to suit marquee Eave brackets Wooden storage crate
Walls Wall Options Baytex offer a wide range in wall styles for your marquee. Use plain walls as a backdrop, clear or panorama for extra light. Upgrade to bayview, cottage or frenchview window Baytex Wall Advantages: Removable and interchangable All sidewalls are tensioned with base rails Simple lacing and eyelet system ensures walls are securely fastened Made from high quality Fire Retardent PVC Strong construction for durability Plain Walls Clear Walls Panorama Walls Bayview Walls Frenchview Walls Cottage Walls
Stake Puller Stake Puller The Baytex Stake Puller is the fastest tool on the market for removing large numbers of stakes. Available in two options: Standard for regular stakes and Structure for structure stakes Key Features One piece design with interchangeable heads for different stake diameters Works on pillar jack principle Light weight, easy to carry and move Large stable base won t sink into soft ground Ergonomically designed to minimise back strain Structure puller has extra tongue to lever base plates Structure puller is ideal for removing single head stakes Specifications Leverage: 10:1 (approx) Weight: 11.5kg (25lb) OA Height: 1600mm (63 ) Material: Galvanised steel Standard Stake Puller Structure Stake Puller
Stake Puller Using the Stake Puller Standard Stake Puller Structure Stake Puller Pulling Single Head Stakes Lifting Base Plates
Ratchet Strap Ratchet Strap The compact and strong tensioning mechanism. Key Features Effective and easy to use Load binder tensioning mechanism for easy tension adjustment Compact and strong Built in mechanism cover Certified load rated Specifications Strap Type Width Length RS50 50mm 4.2m RS35 35mm 4.2m Web Material Heavy Duty Polyester, White Heavy Duty Polyester, White Nominal Rated Capacity 1500kg 1000kg
Stakes Marquee & Structure Stakes Baytex offers a selection of stakes for canopies, marquees and structures. Baytex Stakes Key Features Ideal for pole marquees, smaller frame marquees and canopies Also suitable for larger rame f marquees and structures Economical Machined and fabricated from mild steel bar Hogan Stakes Key Features Ideal for larger frame marquees and structures Available in double (standard) or single head (optional) Will not bend or lose their points Made from ult ra high tensile steel Wall Pin Canopy Stake Marquee Stake Specifications Hogan Double Head Stake Stake Type Dia Length Material Nominal Pull - Out Capacity Nominal Rated Capacity Wall Pin 8mm 320mm Elec Galv Unrated Unrated Wall Pin 12mm 550mm Elec Galv Unrated Unrated Canopy Stake 15mm 550mm Mild Steel unrated unrated Marquee Stake 24mm 850mm Mild Steel 400kg 200kg Hogan Double Head Hogan Double Head 25mm 760mm High Tensile Steel 500kg 250kg 28mm 1067mm High Tensile Steel 1000kg 500kg
Staking Plate Staking Plate The simple and effective way to increase the holding capacity of your stakes. Key Features Increase stake capacity by 2X with 2 stakes Increase stake capacity by 2½X with 3 stakes Economical and simple design Low profile to minimise trip hazard Effective and easy to use Specifications Dimensions: 750mmL with 3 holes at 40mmDia Material: 50mm x 75mm MS angle Finish: Hot dip galvanised
Flooring Flooring This modular flooring system can be used in a wide variety of situations and venues from walkways, exhibitions, tradeshows, concerts etc. It is most suitable for installation on unsealed or irregular surfaces. Mid-Grey is the stocked colour with other colour options also available. Key Features Light and easy to use Quick to install and dismantle Compact storage Slip resistant Easy to clean *Contact Baytex for our comprehensive Flooring Brochure!
Baytex Australia Contact Baytex Australia Pty Ltd Unit 8, 11-13 Cochrone Street Kincumber PO Box 248, Avoca Beach NSW 2251 Australia P: +61 2 4368 3007 F: +61 2 4368 4007 E: info@baytex.com.au