Product Description 12" Unidirectional High/Medium-Intensity Inset Light (INL-AP) Runway Threshold Wing Bars Runway End Approach - Centre Line - Crossbars - Side Row Barrettes
Note: This page is blank for convenient double-sided printing.
Safegate Group 1. INTRODUCTION INL-AP is a 12 unidirectional high/medium intensity inset light. Utilisation Runway Threshold Wing Bars Runway End Approach - Centre Line, Crossbars, Side Row Barettes Compliance ICAO: Annex 14 Volume I Paragraphs 5.3.4 and 5.3.10 for use in CAT I, II and III NATO: STANAG 3316 French STNA CAP 168 BS 3224 2. MAIN ADVANTAGES Low power consumption: only 105 Watts for runway end and 2 x 105 W for runway threshold. Lamp life greater than 1,000 hours at 6.6 Amps. Low projection: 12.7 mm (1/2") Small diameter: 304 mm (12") Shallow depth: installation in 150 mm shallow base (shallow cover version). Excellent photometric performances obtained by the use of reflector lamp: - Improved luminous efficacy. - Identical lamp performance: Reflector being an integral part of the lamp, hence each time the lamp is changed there will be a new reflector. - High optical stability: no internal adjustment needed since the pre-focused lamp is always correctly positioned inside the lamp reflector. Very easy and high-speed maintenance: small quantity of components so lights can be easily dismantled. Non-sealed prism easy to replace. Valve for water-tightness test. Many parts common with other lights in the same model range. Fitting installation parallel to approach centre line axis. Easy handling and transport due to small size and low weight. Page 1 of 6
Safegate Group 3. TECHNICAL CHARACTERISTICS Component Description Lamp: 105 Watts 6.6 Amps pre-focused halogen lamp with an integral dichroic-coated reflector. Lamp life at 6.6 Amps greater than 1,000 hours. Power Supply: The fitting is supplied complete with one x two-pole secondary FAA plug for connection to an isolating transformer. Photometry: Distribution and homogeneity comply with Appendix 2 of ICAO Annex 14 Volume I and with FAA L-850D. Colour: Green or Red dichroic filter. Chromaticity complies with Appendix 1 of ICAO Annex 14. Volume I. Finish: All external parts are made of anodised tempered aluminium alloy casting. All fixings and fastenings are stainless steel. Fixing on support: By six M10 studs and nuts (supplied with the base or the adapter ring). Projection: 12.7 mm (1/2 ). External diameter: 304 mm (12"). Net Weight: 6 kg. Packing Data Designation Volume m 3 Dimensions mm Weight kg INL-AP 0.019 350 x 350 x 155 7.0 4. INSTALLATION OPTIONS Description On 12" shallow base 150 mm deep with side access (see FIG 1). On 12" shall0w base 150 mm deep with bottom access (see FIG 2). On FAA L-868B deep base (see FIG 3). On FAA L-868C or FAA LB-1 deep base with 16"/ 12" adapter ring (see FIG 4). On SR9 seating ring by means of SR9/12"adapter ring. Note: Fitting installation is always parallel to approach centre line axis. For more information, see the Design section. Image examples Page 2 of 6
Safegate Group 5. PHOTOMETRICS This section includes photometric examples of different light configurations. Photometric examples Approach Centre Line and Crossbars INL-APC (3 x 105 Watts) White Light I average : 29,300 cd I max / I min : 2.35 Approach Side Row barrettes INL-APS (3 x 105 Watts) Red Light Toe in : 2 I average : 6,550 cd I max / I min : 1.65 Threshold Wing Bars INL-APW (3 x 105 Watts) Green Light Toe in : 2 I average : 12,950 cd I max / I min : 2.10 Page 3 of 6
Safegate Group 6. DESIGN Components INL-AP 1. Body of the Fitting 2. Silicone Prism Gasket 3. Non Sealed Prism 4. Prism Clamp with Screws 5. Cover Gasket 6. Cable with FAA Secondary Plug and Compression Packer 7. Lamp Spring 8. Lamp Support 9. Filter Spring 10. Dichroic Filter 11. Pre-focused Halogen Dichroic Reflector Lamp105 Watts at 6.6 Amp 12. Cable Terminal 13. Cover of the Fitting 14. Cover Screws 15. Valve for Water tightness Test 16. Cable for Connection Between Terminals 17. Film Disk Cut Out Holder 18. Film Disk Cut Out 19. O ring gasket for THORN 12" base. 7. ORDER CODES The table below is a guide to order codes for a fitting with available component parts. Description Components INL- APC FD Type Approach Centre line Approach Cross bar Approach Side row barrettes Threshold wing bar Cut out device (option) Film disk cut out (x3) Additional 12" shallow base and Adapter ring APC APC APS APW FD For more information, contact Safegate Group or see www.safegate.com. Page 4 of 6
Safegate Group 8. SPECIFICATION The runway approach or threshold wing bar inset light shall be unidirectional high intensity complying with ICAO recommendations in Annex 14, Volume I, paragraphs 5.3.4 and 5.3.10, STANAG 3316 standards, CAP168 and British Standards BS 3224. It shall be equipped with three 105 Watts 6.6 Amps halogen pre-focused dichroic reflector lamps. Lamp life at full intensity shall be greater than 1,000 hours. All external parts shall be made of anodised tempered aluminium alloy casting. All fixings and fastenings shall be stainless steel. It shall have a maximum outer diameter of 304 mm (12 ) and its projection shall not exceed 12.7 mm (1/2 ). It must be able to be installed directly on a 12" shallow base, on a FAA L-868B deep base or by means of adapter ring on a FAA L-868C or FAA LB deep base or a seating ring. It will be designed to allow easy maintenance. - The prisms shall not be sealed. - The filters shall be dichroic. - The fittings in this model range shall share many of the same components. - No internal adjustment shall be needed. Note: All descriptions and photometric characteristics in this publication present only general particulars and shall not form part of any contract. The right is reserved to change them without prior notification. Page 5 of 6
Safegate Group Check in to the future How many aircraft can your airport handle today? Can this number be increased without adverse effects on the airport s safety level? It is a known fact that traffic volume will rise in the foreseeable future. More movements will demand monitoring of the entire airport. Requirements will be sharpened and the development of an integrated system controlling not only ground movements but also air traffic close to the airport is of the highest interest. The International Civil Aviation Organization (ICAO) already describes A-SMGCS, Advanced Surface Movement Guidance and Control System, as the answer to the future modern airport need to control the entire airport space in one superior system. To a larger extent than today s systems, A-SMGCS will rely on automated processes to give both pilots and traffic controllers exact information about positions and directions. Safegate Group delivers complete A-SMGCS solutions already, as well as all vital parts relating to it. Safegate Group can check your airport into the future today! Safegate Group HQ Djurhagegatan 19 SE-213 76 Malmö, Sweden Phone: +46 (0)40 699 17 00 Fax: +46 (0)40 699 17 30 E-mail: market@safegate.com Brazil brazil@safegate.com +55 11 2137 4405 Finland finland@safegate.com +358 (0)20754 7700 India india@safegate.com +91 11 4106 1545 Malaysia malaysia@safegate.com +60 32 011 3522 Singapore singapore@safegate.com +65 6289 6893 Spain spain@safegate.com +34 917 157 598 Australia australia@safegate.com +61 (0)3 9720-3233 China china@safegate.com +8610-85275297 France france@safegate.com +33 (0)1 42 99 60 40 Qatar qatar@safegate.com +974 436 9628 UK uk@safegate.com +44 (0)208 573 0384 Austria office@avibit.com +43 316 429961 Dubai dubai@safegate.com +971 4 452 75 75 Germany germany@safegate.com +49 (0)4121 464 303 Russia russia@safegate.com +7 495 917 4614 USA usa@safegate.com +1 763 535 92 99 Safegate Group offers solutions for increased safety, efficiency and environmental benefits to airports worldwide. The company was founded in 1973 and has its headquarters in Malmö, Sweden. Safegate Group has more than 70 partners around the globe in order to be close to its customers. Earlier members of Safegate Group include Thorn AFL and Idman, who both have over 40 years of experience in airfield lighting solutions for airports and heliports. The latest member of Safegate Group is Avibit, a leading provider Page of next 6 of generation 6 software applications and integration of efficient air traffic control systems. Safegate Group s complete range of products and services, a one-stop shop, provides solutions to customers and airborne travellers around the globe. www.safegate.com