Thermo Scientific TRACE 10 Series Gas Chromatograph Consumables 0 0 1 1 200 200 2 2 Proven consumables for optimum system performance
Thermo Scientific TRACE 10 series gas chromatograph Increasing productivity is the primary challenge for laboratories using automated analytical equipment. Improvements in these areas are directly connected with the simplification of analytical workflow, optimization of technical resources and waste reduction. TRACE 10 Series Gas Chromatograph is the latest technology to simplify workflow and increase analytical performance in QA/QC and routine laboratories. Developed around key innovations driven by customer needs, TRACE 10 Series GC delivers: The capability to quickly tailor to specific user requirements Easy adoption of standard GC methods Unmatched detector sensitivity in trace analysis Increased robustness of injector technology Shorter sample cycle time 2
TRACE 10 Series GC is a fast, easy to use and versatile GC system TRACE 10 Series GC is a fast, easy to use and versatile GC system which delivers extremely high levels of laboratory productivity. Combined with the Thermo Scientific Dionex Chromeleon Data System, it offers a powerful tool to streamline the path from samples to results, offering enhanced operational simplicity. Changing the configuration of TRACE 10 Series GC is quick and easy too. Just remove the fixing screws and connect the new injector or detector modules. Thermo Scientific Instant Connect (IC) modules mean you don t need special training, dedicated tools or on-site service engineers to tailor a GC configuration to a specific workload or to run a particular method. This unique modular design offers the following advantages to the operator: Exceptional throughput easily increase from single to multiple channels to satisfy rapid incremental business needs and reduce sample cycle time Routine maintenance in minutes replace contaminated injector/detector bodies easily and start running samples quickly TRACE 10 Series GC is available in two models TRACE 10 Series GC is ideal for basic routine laboratory work, when operator expertise requires ease of use with minimal instrument interaction. Larger routine QA/QC laboratories will benefit from the TRACE 13 Series GC as it features a touch screen interface which is ideal for direct instrument control when method development is required. 3
Thermo Scientific columns and consumables The TRACE 10 Series GC has been designed to be fully compatible with standard consumables used on different GC models and brands. Thermo Fisher Scientific offers a complete range of columns and consumables to support the TRACE 10 Series GC, ensuring optimum performance and high quality results. 0 For today s chromatographer, Thermo Scientific TraceGOLD, TRACE and TracePLOT columns provide excellent quality and performance with guaranteed reproducibility. 1 Syringes, injection port liners, ferrules, gas filters, o-rings and septa are designed to complement our innovative GC and GC/MS systems. This wide range of consumables and accessories is designed to offer application-focused solutions to customers in the petrochemical, food and beverage, environmental and other industries. 200 2 Vials and Closures 2 ml crimp top vial, clear glass with ID patch and 11 mm blue aluminium cap, blue silicone/red PTFE seal 2 ml screw top vial with 9 mm cap soft blue silicone/clear PTFE seal 2 ml crimp top vial, clear wide mouth with ID patch 2. ml crimp top vial, clear 11 mm aluminium crimp caps with PTFE faced septa 2 ml screw top vial, clear with ID patch 8 mm polypropylene empty open top screw cap 8 mm seal, blue silicone/clear PTFE 0 μl screw top fixed insert vial, clear with ID patch 2 ml wide mouth screw top vial, clear with ID patch 9 mm screw cap, blue, prefitted silicone/ptfe seal 9 mm magnetic cover and screw cap, prefitted with a soft silicone/ptfe seal 0 μl snap cap fixed insert vial, clear with ID patch 2 ml snap cap vial, clear with ID patch 11 mm PE snap cap, prefitted with a blue silicone/ptfe seal ml crimp top vial, clear 20 ml crimp top vial, clear 20 mm aluminium crimp cap with PTFE/silicone seal, 3mm thick Cat.. 60180-97 60180-99 60180-2 60180-3 60180-60180-8 60180-14 60180-1 60180-7 60180-9 60180-16 60180-17 03-FIRV 2-RV 11-PSN(B)-ST1 60180-4 60180-6 60180-11 0 Pack 0 Pack 0 Pack 0 Pack 1 Pack 1 Pack 4
Injection port liners SSL injection port liners Injection Type ID x OD (mm) Length (mm) Packing Cat.. Recommended Use Split Straight Liner 78. Quartz Wool 43A2 Split injection, standard liner* Split Straight Liner 78. 43A129 Split injection, active samples Splitless Liner with Single Taper 78. Quartz Wool 43A19 Splitless injection, standard liner* Split/Splitless Liner with Single Taper 78. 43A134 Splitless injection, active samples Direct Straight Liner 1.2 x 6.3 78. 43A133 SPME; HS or without P&T adaptor Split/Splitless Mini-Lam Liner 78. 43A2009 Split/Splitless Mixed Liner Sample Pack Mixed Mixed 43TH002 Active samples *Standard liners are shipped with the TRACE 10 Series GC PTV injection port liners Injection Type ID x OD (mm) Length (mm) Packing Cat.. Recommended Use PTV Siltek Metal Liner 2 x 2.7 4322044 High boiling point samples, active samples PTV Straight Liner (n-deactivated) 2 x 2.7 432204 Universal PTV Straight Liner (Silanized) 2 x 2.7 4320 Universal PTV Split Liner with Recessed Gooseneck 2 x 2.7 Quartz Wool 432070 Trace samples, high recovery and linearity PTV Siltek Metal Liner 1 x 2.7 4322046 High boiling point samples, high recovery PTV Straight Liner 1 x 2.7 43204 Universal, high recovery PTV Siltek Metal Liner 2 x 2.7 Quartz Wool 432206 Trace samples, large volume injection PTV Liner with Sintered Lining 1 x 2.7 432060 Active samples, large volume injection PTV Liner with Three Baffles 1 x 2.7 432062 Active samples, high linearity PTV Baffle Liner (Siltek) 2 x 2.7 43T2 High boiling samples, high linearity PTV Silcosteel Liner for OC 1 x 2.7 432202 On-Column injections PTV Mixed Liner Sample Pack Mixed Mixed 43TH003
Injection port liner seals Liner Sealing Ring for SSL Injector Liner Sealing Ring for PTV Injector Viton Liner Sealing Ring Cat.. 29001312 29001318 290OA241 Ferrules for standard SSL; SSL-Backflush; FID; TCD; ECD; NPD Graphite Ferrule for 0.1-0.32mm Column Graphite Ferrule for 0.4-0.3mm Column Graphite / Vespel Ferrule for 0.1-0.mm Column Graphite / Vespel Ferrule for 0.32mm Column Graphite / Vespel Ferrule for 0.3mm Column Cat.. 290GA139 290GA140 290VA191 290VA192 290VA193 Ferrules for standard PTV and PTV -Backflush Encapsulated Graphite Ferrule for 0.1-0.mm Column Encapsulated Graphite Ferrule for 0.32mm Column Encapsulated Graphite Ferrule for 0.3mm Column Cat.. 2903488 2903487 2903486 Injection port septa Type Material ID (mm) Cat.. BTO Low Bleed Silicone 11 3133 Pack TR-Green Low Coring Silicone 11 313G Pack Inlet base seals For Use with ID (mm) Cat.. Gold, Single Column Installation 290GA081 Gold, Single Column Installation 290GA082 Gold, Dual Column Installation 1.2 290GA121 Gold, Dual Column Installation 1.2 290GA122 Gold Cross Seal 290GA084 Gold Cross Seal 290GA083 Siltek-Treated Base Seals 290GA091 Siltek-Treated Base Seals 290GA092 Siltek-Treated Cross Base Seals 290GA094 Siltek-Treated Cross Base Seals 290GA093 6
Autosampler syringes Volume (µl) Needle Type/Plunger Length (mm) Gauge Tip Style Application Area Cat.. Instrument Compatibility 0. Plunger-in-Needle Split/PTV 36404, AS00, AS13 0. Split 36A0241 1 Split 36B01 Split/PTV 364047 36C3701 AS00, AS13 Split/PTV 360 AS00, AS13 s Merlin Valve injector: PTV and split 36C01 s Split and PTV 36C01 36D3711 AS00, AS13 Split/PTV 360, AS00, AS13 PTV/SSL Split 3620060, AS00, AS13 36D1841 AS00, AS13 - OC in PTV Merlin Valve 36080 36D3731 AS00, AS13 s Merlin Valve injector: PTV and split 36D0271 s Split and PTV 36D0291 s Merlin Valve injector: PTV and split 36D0311 s Split and PTV 36D0331 s Merlin Valve injector: PTV and split 36F2441 s Split and PTV 36F2461 s Merlin Valve SSL injector: LV splitless 36G11 s LV splitless 36G31 0, Gas Tight 36200 0, Gas Tight LV Splitless 36049 0 s Merlin Valve SSL injector: LV splitless 36H2141 0 s LV Splitless 36H2161 0 LV PTV (with or without Merlin Valve) 36H2181 2, Gas Tight 362001 2 LV splitless 36I31 2 LV PTV (with or without Merlin Valve) 36I1 0 Sample dilution 36J2421 0 LV PTV (with or without Merlin Valve) 36J2441 00 22 LC Sample dilution 36K2811 00 Gas Tight 6 Headspace 36Q2121 20 Gas Tight 6 Headspace 36Q2131 00 Gas Tight 6 22 Headspace 36Q2131 000 19 LC Sample Dilution 36N2721 7
Manual syringes Autosampler Volume (µl) syringes Needle Type/Plunger Length (mm) Gauge Tip Style Cat.. 36C0761 36C0741 36D1171 36D91 36F1901 36F1921 36F1891, Gas Tight 36G2161 36G2091 36G2111 36G2081 0, Gas Tight 36H81 0 36H01 0 36H21 0 36H2291 2, Gas Tight 36I11 2 36I61 2 36I41 0, Gas Tight 36J2881 00, Gas Tight 36K41 00 22 36K1 TraceGOLD GC columns Column accessories Phase ID (mm) Length (mm) Film Thickness (µm) Cat.. Cat.. TG-MS 0. 1 0. 098-10 Column Nut for PTV and PTV Backflush 33221 TG-MS 0. 0. 098-1420 Column Nut for SSL-SSL-Backflush, FID, ECD, TCD and NPD 348 TG-MS 0.32 0. 098-14 Silver Gasket 29013820 TG-1MS 0. 1 0. 099-10 TG-1MS 0. 0. 099-1420 TG-1MS 0.32 0. 099-14 TG-WaxMS 0. 1 0. 088-10 TG-WaxMS 0. 0. 088-1420 TG-WaxMS 0.32 0. 088-14 Other phases and dimensions are available please visit www.thermoscientific.com/tracegold 2012 Thermo Fisher Scientific Inc. All rights reserved. All trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries. Specifications, terms and pricing are subject to change. t all products are available in all countries. Please consult your local sales representative for details. USA and Canada +1 800 332 3331 France +33 (0)1 60 92 48 34 Germany +49 (0) 24 9431 20 or 21 United Kingdom +44 (0)1928 341 Japan +81 3 8 161 China +86 21 686488 +86 8419388 +86 20 8314199 800 8 118 India +91 22 6742 9494 Australia 1 0 73 292 (free call domestic) New Zealand 0800 933 966 (free call domestic) All Other Enquiries +44 (0) 1928 34 0 Technical Support rth America +1 800 332 3331 Outside rth America +44 (0) 1928 34 440 BR633_E BRCCSSOLA1111 04/12S