quarter turns vision & style quarter turns INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 3
quarter turns No. 626-PK Patent Pending No. 626-KPK Quarter Turn Slam Latch that is corrosion-resistant and key locking. Ideal for small doors. Easily installed with plastic hex nut, supplied with gasket, nut, stainless steel lock washer, and stainless steel striker. Finish: Matte black Material: Plastic No. 626-PK Nonlocking version. 4 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
quarter turns No. 520-XA Has slotted insert for use with a screwdriver. No. 520-ACU With clip. No. 520-X66 Less cam. No. 520-XA No. 521-XA Has a hex insert for use with a 1/4" hex tool. These attractive, low-profile latches have universal use because of their clean, modern appearance. They are designed mainly for use on light cabinet doors and panels. A distinctive snap lets the user know that the latch is fully open or fully closed. The dead-bolt latches each come with a hex nut for mounting them to a door or panel. The cam is held in place with a lock washer and screw. No. 521-XA No. 520-XB SLOTTED No. 521-XB HEX No. 520-XC SLOTTED No. 521-XC HEX Materials: Hex plug or slotted plug barrel and hex nut are zinc die cast. Cam, lock washer and screw are made of steel. Finish: Nickle-plated Weight:.09 lbs. EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 5
quarter turns No. 2-620-PK No. 2-620-PK Die cast turn latch requiring a slot tool to actuate. The textured finish gives an aesthetically pleasing look and the arrow indicator shows a cam direction so that with a visual check user can be assured the latch is in the locked position. Threaded barrel with mounting nut for ease of assembly. Finish is chrome. No. 2-621-PK No. 2-621-PK Die cast turn latch requiring a.38 hex tool to actuate. The textured finish gives an aesthetically pleasing look and the arrow indicator shows a cam direction so that with a visual check user can be assured the latch is in the locked position. Threaded barrel with mounting nut for ease of assembly. Finish is chrome. No. 506-PK.14 DIA. HOLES 4 PLACES.50 1.00.50 1.00 No. 506-PK Designed for adjustment of the pawl from.13" to 2" maximum depending on pawl direction. The bail handle is ideal for ease of grip. Finish is electroplated zinc..377 DIA. HOLE SUGGESTED CUTOUT No. 12417944-PK With reinforced bale handle. 6 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
quarter turns No. 3-521-MA 4 mm activated quarter-turn latch. Materials: Hex plug or slotted plug barrel and hex nut are zinc die cast. Cam, lock washer and screw are made of steel. Finish: Nickle-plated Weight:.09 lbs. No. 3-521-MA No. 1-621-XA.25" hex activated quarter-turn latch. No. 1-621-XA No. 1-623-U Spring-back quarter-turn knob latch. No. 1-623-U EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 7
quarter turns No. 522-XA No. 522-X66 Less cam. No. 522-XA This attractive, low-profile latch has universal use because of its clean, modern appearance. It is designed mainly for use on light cabinet doors and panels. A distinctive snap lets the user know that the latch is fully open or fully closed. The dead-bolt latch comes with a hex nut for mounting it to a door or panel. The cam is held in place with a lock washer and screw. For use on panels up to 1/4" thick. Materials: Lock button, barrel and hex nut are zinc die cast. Cam, lock washer and screw are made of steel. Finish: Nickle-plated with black knob. Weight:.13 lbs. No. 522-XB No. 522-XC No. 523-RU No. 522-ECUR&L Same as 523-RU except cutout is same as 522-XA. 8 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
quarter turns No. 1-501-AR, BR, or CR Screwdriver slot. No. 1-501-AR, BR, or CR No. 1-501-A, B or CR Latch Continuously self-adjusting. This unique, low-profile latch offers many advantages for use on industrial cabinets, electronic enclosures and a host of other products. Easy access can be achieved through the use of a screwdriver slot on No. 1-501-R. The right-hand version is standard. Left-hand version available as request quote. Ideal for primary access panels, especially those with gasketing, this latch provides minimum exterior surface protrusion. The self-adjusting feature incorporates an exclusive, patented design which eliminates the wearing of the shaft threads normally associated with spring tension units currently on the market. Designers will particularly welcome the versatility of this latch in that it also offers three styles of latching cams (one straight and two offset) as well as limited internal enclosure protrusion. Installation is extremely easy; just punch or cut a single hole and blind mount the latch from the inside. Weight:.19 lbs. Finish: Nickel-plated No. 1-501-SSAR, BR, or CR same as above except stainless steel Note: Grip range for 501,502, 503, & 504 Series No. Min. Grip Max. Grip 1-501-AR 7/64" 45/64" Grip Range 1-501-BR 27/64" 1-7/64" 1-501-CR 47/64" 1-21/64" No. 503-CR Same as the 1-501 Series except has knurled knob used to turn latch. No. 503-CR EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 9
quarter turns No. 630-SS No. 630-SS Quarter turn compression latch with tool operated head is made with stainless steel, carbon steel, and die cast materials for strength and durability. Ideal for cabinet doors or light duty applications, it comes with a black powder coat finish for an attractive appearance. Tool sold separately No. 630-11. No. 401-BR No. 401-BR Self-adjusting compression latch with slotted head. 190 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
quarter turns No. 1-502-R Screwdriver slot. This latch is an adaptation of the No. 1-501 R. Instead of being continuously self-adjusting, this latch and its options can have the height of the latch cam adjusted to a specific application and it is then fixed for that service. The right-hand version is standard. Left-hand version available as request quote. Weight:.25 lbs. Finish: Nickel-plated No. 1-502-R No. 504-R Small knurled knob. This latch is an adaptation of the No. 1-501-R. Instead of being continuously self-adjusting, this latch and its options can have the height of the latch cam adjusted to a specific application and it is then fixed for that service. The right-hand version is standard. Left-hand version available as request quote. Weight:.33 lbs. Finish: Nickel-plated No. 504-R No. 501-AR, BR or CR Continuously self-adjusting. No. 502-1 Fixed/adjustable cam. This latch uses specially designed actuating tool No. 501-1. Same as 1-501 and 1-502 except for different head configuration. Since no standard tool will operate it, a specially designed actuating tool is available, No. 501-1. request quote EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 191
notes 192 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS