Catalog No. 602-08 Locker Specifiers Guide When Quality and Delivery Count! P.O. Box 671 Aurora, IL 60507-0671 Customer Service: 800/323-0082 Literature: 800/323-0096 Fax: 800/367-6681 email: lyon@lyonworkspace.com www.lyonworkspace.com Standard Heavy Duty & H.D. Ventilated Integrated Frame All Welded Expanded Metal Collegiate Specialty Specify Lyon
COLORS BY Lyon s Premier color selections and/or a computerized match to your custom color offer a virtually endless combination of choices including two tone effects. Our preparation and finishing procedures deliver a superior enameled surface, highly resistant to chipping, cracking and corrosion, to create a lasting impression for your locker installation. Note: All color chips approximate the actual color as closely as possible. For a more precise color match, request a free 601C color chart showing Lyon s 30 premier colors. Lifetime Product Warranty Lyon lockers are warranted against defects in material and workmanship for the life of the product, when used in accordance with manufacturer s specifications and/or operating instructions.* (This warranty applies to the original purchaser only, and purchaser s sole remedy under this warranty is limited to replacement or repair of the product and specifically excludes consequential, incidental or any other damages directly or indirectly resulting from failure or loss of use of Lyon products). * Lock warranties limited. Specify s New Antimicrobial Finish Lyon antimicrobial lockers are finished in an advanced powder coating technology from DuPont that inhibits mold, bacterial and odor build-up on locker surfaces, as well as the touch transfer of microbes on locker handles and doors. Here s how it works: Any moisture triggers the controlled release of powerful silver ions to provide superior antimicrobial protection for decades. The antimicrobial compound is completely inorganic, less toxic than ordinary table salt, less irritating than talcum powder, and has been approved for medical devices and food contact applications. We look at it this way: The cost is small. The peace of mind, immeasurable. Antimicrobial Performance Application Examples: School Locker Rooms School Corridors Food Processing Facilities Healthcare Environments All Lyon Lockers are available in the Antimicrobial Finish. Antimicrobial finish lockers are available from stock in light gray (GY655) in the following sizes: Single Tier: 15"w x18"d x 72"h Single Tier: 18"w x18"d x 72"h Double Tier: 12"w x12"d x 36"h Double Tier: 12"w x18"d x 36"h Fights bacterial and mold growth! in partnership with Tests conducted on epoxy coated stainless steel DuPont and 2 Specify Lyon!
Standard Lockers For Quality and Value! Single Tier Quiet Lockers Double Tier Quiet Lockers Triple Tier Quiet Lockers Multiple Tier Lockers 9", 12", 15", 18" W Double Tier (per opening) 9", 12", 15", 18" W 30", 36" H Triple Tier (per opening) 9", 20", 24" H Four Tier (per opening) 15", 18" H Five & Six Tier (per opening) 12" H Quiet Plus Eliminating metal to metal contact, all Lyon locker doors are fitted with nylon lockbar guides to reduce clanging and provide smoother, quieter operation. In addition to quieter lock bars, Lyon Quiet-Plus locker doors have no louvers and include a sound deadening door panel. The resulting combination minimizes noise levels caused by opening and closing locker doors. Handle Types Quality Features Tamper Guard Handles have built in padlock loop. Available on single, double, triple-tier lockers. Single Point Latching System operates with no moving parts. May be subject to additional charge. Available on single, double, and triple tier lockers. Not available on 9" wide lockers. Recessed Handles with finger lift offer added safety and security, clean flush front appearance. Available on single, double, and triple tier lockers. Pull Handles, with built-in padlock loop, are standard on multiple tier lockers. Optional roll point catch available. Lyon Solutions to Locker Abuse Nano rollers ride effortlessly up the door jambs and drop into place, providing up to 3-1/2 times the resistance to break-ins compared to other locker latching systems. (Note: for demonstration purposes, top nano roller has been lowered into close proximity with locker handle.) New nylon lockbar guide ensures lockbar alignment and eliminates metal-to-metal contact. High security Lyon lockbar, installed. RECESSED LOCKER HANDLE HIGH TECH NANO ROLLERS PAD- LOCK HASP NYLON GUIDE LOCKBAR CHANNEL Single Point latches include full depth 12 gauge by 4 support brackets and 10 gauge restricting tabs to reinforce the latch plate. Turn Handles have built in padlock attachments, and heavy duty, 3-point locking mechanisms that fully engage the frame. Available on single, double, and triple tier lockers. The door frames are formed by overlapping and welding the junction between the horizontal and vertical members to form a rigid unitized structure that fully frames the door. Standard hinges are full loop design and provide more strength than larger butt type hinges. The full loop hinges are inserted through slots in the door and frame to maintain alignment and increase attachment strength. Door frames include integral full height 16 gauge door strikes to reinforce door edges. One piece doors formed from 16 or 14 gauge prime, high grade class 1 steel. Three latch points on single tier doors and two on double and triple tier doors. One piece Nickel plated 40,000 psi zinc alloy recessed handle pockets add strength to the handle area and eliminate the vulnerable seams of formed handles. Soft rubber bumpers, at door jamb locations, cushion door slams. 16 ga. door and frames. 24 ga. body parts. One piece door. Full loop type hinges All metal locking system. 40,000 psi zinc alloy handles. Lustrous powder coat finish. Built in padlock loop. Built in key locks or combination locks are available. Fully assembled construction optional. LYON strongly recommends wall and/or floor anchoring for all locker installations. 3 Specify Lyon!
Heavy Duty Lockers For Durability and Value! Single Tier Quiet Lockers Double Tier Quiet Lockers Triple Tier Quiet Lockers Multiple Tier Lockers (4, 5, and 6 Tier) 9", 12", 15", 18" W Double Tier (per opening) 9", 12", 15", 18" W 30", 36" H Triple Tier (per opening) 9", 20", 24" H Four Tier (per opening) 15", 18" H Five & Six Tier (per opening) 12" H Quiet Plus Eliminating metal to metal contact, all Lyon locker doors are fitted with nylon lockbar guides to reduce clanging and provide smoother, quieter operation. In addition to quieter lock bars, Lyon Quiet-Plus locker doors have no louvers and include a sound deadening door panel. The resulting combination minimizes noise levels caused by opening and closing locker doors. Handle Types Quality Features Tamper Guard Handles have built in padlock loop. Available on single, double, triple-tier lockers. Lyon Solutions to Locker Abuse Nano rollers ride effortlessly up the door jambs and drop into place, providing up to 3-1/2 times the resistance to break-ins compared to other locker latching systems. (Note: for demonstration purposes, top nano roller has been lowered into close proximity with locker handle.) New nylon lockbar guide ensures lockbar alignment and eliminates metal-to-metal contact. High security Lyon lockbar, installed. RECESSED LOCKER HANDLE Single Point Latching System operates with no moving parts. May be subject to additional charge. Available on single, double, and triple tier lockers. Not available on 9" wide lockers. HIGH TECH NANO ROLLERS PAD- LOCK HASP NYLON GUIDE LOCKBAR CHANNEL Single Point latches include full depth 12 gauge by 4 support brackets and 10 gauge restricting tabs to reinforce the latch plate. Recessed Handles with finger lift offer added safety and security, clean flush front appearance. Available on single, double, and triple tier lockers. Pull Handles, with built-in padlock loop, are standard on multiple tier lockers. Optional roll point catch available. Turn Handles have built in padlock attachments, and heavy duty, 3-point locking mechanisms that fully engage the frame. Available on single, double, and triple tier lockers. The door frames are formed by overlapping and welding the junction between the horizontal and vertical members to form a rigid unitized structure that fully frames the door. Standard hinges are full loop design and provide more strength than larger butt type hinges. The full loop hinges are inserted through slots in the door and frame to maintain alignment and increase attachment strength. Door frames include integral full height 16 gauge door strikes to reinforce door edges. One piece doors formed from 16 or 14 gauge prime, high grade class 1 steel. Three latch points on single tier doors and two on double and triple tier doors. One piece Nickel plated 40,000 psi zinc alloy recessed handle pockets add strength to the handle area and eliminate the vulnerable seams of formed handles. Soft rubber bumpers, at door jamb locations, cushion door slams. 14 gauge door. Full loop type hinges. All metal locking system. 16 gauge body parts with 18 gauge backs. One piece door. 40,000 psi zinc alloy handles. Lustrous powder coat finish. Built in padlock loop. Built in key locks or combination locks are available. All-welded construction optional. Lyon Heavy Duty Lockers are also available with: Diamond shaped perforations on doors and sides for superior ventilation. All-welded construction for superior strength and durability. LYON strongly recommends wall and/or floor anchoring for all locker installations. 4 Specify Lyon!
Integrated Frame All-Welded Lockers All lockers shown with optional diamond perforations. Single Tier Lockers Double Tier Lockers Triple Tier Lockers Multiple Tier Lockers (4, 5, and 6 Tier) 12", 15", 18", 24" W Double Tier (per opening) 12", 15", 18" W 30", 36" H Triple Tier (per opening) 20", 24" H Four Tier (per opening) 15"H Five & Six Tier (per opening) 12" H LYON strongly recommends wall and/or floor anchoring for all locker installations. Handle Types Lyon Lockbar Tamper Guard Handles have built in padlock loop. Standard on single, double, triple-tier lockers. High security Lyon lockbar, installed. RECESSED LOCKER HANDLE Single Point Latching System operates with no moving parts. Available on single, double, and triple tier lockers. HIGH TECH NANO ROLLERS PAD- LOCK HASP NYLON GUIDE LOCKBAR CHANNEL Recessed Handles with finger lift offer added safety and security, clean flush front appearance. Available on single, double, and triple tier lockers. Nano rollers ride effortlessly up the door jambs and drop into place, providing up to 3-1/2 times the resistance to break-ins compared to other locker latching systems. (Note: for demonstration purposes, top nano roller has been lowered into close proximity with locker handle.) New nylon lockbar guide ensures lockbar alignment and eliminates metal-to-metal contact The Lyon Choice: Single Point Latch (no moving parts) is securely welded to locker body providing firm seat for repetitive door openings and closings. Door is held closed magnetically. Three Point Latch Multi-point locking mechanism with Lyon s new lockbars add the convenience of closing the doors in the locked position. Available with either Tamper Guard handles or recessed handles. Both handles include padlock attachments and accept built-in key or combination locks. 16 gauge body parts, 18 gauge backs 14 gauge doors with inner panel reinforcement. Single point magnetic latch, no moving parts. Optional multi point latching with high security lockbar. Full height hinge. Powder coat finish 1 door thickness for added strength. Security Vents. Single piece top, bottom and back for each locker group. Multiple tier lockers have nickel plated recessed handles with single point latching. For Maximum Strength and Security! Locker Features Full length piano-hinges maintain positive door alignment, prolong smooth operation. M.I.G. welded bottom channels create solid footing beneath each locker body and strengthens locker bottoms. Optional 4" high bases (not shown) afford additional clearance below door openings, prevent accumulations of dust underneath. 5 Specify Lyon!
Expanded Metal Lockers For Maximum Ventilation and Visibility! Single Tier Lockers Double Tier Lockers Triple Tier Lockers Multiple Tier Lockers (4, 5, 6, 8 and 9 Tier) 9", 12", 15", 18", 24" W Double Tier (per opening) 9", 12", 15", 18", 24" W 30", 36" H Triple Tier (per opening) 9", 20", 24" H Four Tier (per opening) 15", 18" H Five & Six Tier (per opening) 12" H Eight & Nine Tier (per opening) Handle Types Pull Handles, with built-in padlock loop, are standard on multiple tier lockers. Optional roll point catch available. Turn Handles have built in padlock attachments, and heavy duty, 3-point locking mechanisms that fully engage the frame. Standard on single, double, and triple tier lockers. All doors on single, double and triple tier lockers feature bright, chrome plated handles with built in padlock attachment. Number plates mount above handle, and built in key locks or combination locks may be added to the right of the handle. Expanded metal K.D. lockers are available as starter units, or as two wide add-on units. Add-on must be attached to a starter unit or another addon unit. Knocked Down door. sides. Lustrous powder coat finish. Chrome plated turn handles. All metal locking systems. Fully assembled construction optional. Built in padlock loop. Built in key locks or combination locks are also available. All-Welded door. sides. Baked on enamel finish. 12", 15" 18" D 8", 9" H Chrome plated turn handles. All metal locking systems. All seams and Joints welded for rigidity. Built in padlock loop. Built in key locks or combination locks are also available. 16 gauge body parts with 18 gauge backs. Full loop type hinges. 6 Specify Lyon!
Collegiate Lockers (All-Welded & Knocked Down) All doors on single, double and triple tier lockers feature bright, chrome plated handles with built in padlock attachment. Number plates mount above handle, and built in key locks or combination locks may be added to the right of the handle. Deluxe Collegiate Lockers offer additional security for special equipment or assigned gear. 18" high interior compartment bench with padlock hasp. Upper compartment door may also be equipped with built-in key or combination lock. Deluxe Collegiate Lockers with Doors offer the same design and construction features as above, plus the added security of a reinforced door. Collegiate Lockers are designed to provide easy access to equipment and uniforms in team locker rooms. Shelf included. Collegiate Lockers with Doors are recommended for storing bulky uniforms of hockey and football teams, offering up to 36" wide compartments. Reinforcing K-brace welded to each door frame for added strength and proper door alignment. 24", 33", 36" W 18", 21" 24" D For Maximum Storage and Ventilation of Bulky Athletic Gear! All-Welded All seams and Joints welded for rigidity. Optional boxes shipped knocked down. 16 gauge body parts with 18 gauge backs Full loop type hinges. door. sides. All metal locking systems. Chrome plated turn handles. Baked on enamel finish. Knocked Down door. sides. All metal locking systems. Chrome plated turn handles. Baked on enamel finish. Fully assembled construction optional LYON strongly recommends wall and/or floor anchoring for all locker installations. 7 Specify Lyon!
1-Person 2-Person Specialty Lockers 3-Person Cubbie Lockers for Kids! Lyon Cubbies for Kids meet the storage needs of youngsters in day care centers, pre-schools and elementary schools, while enhancing the colorful decor that is so popular in early childhood learning environments. Choose from 3 different models that accommodate from one to three children each. Standard Lyon Cubbies for Kids are available 15" deep, and 12", 15" and 18" wide. Our Cubbies are constructed from heavy duty 16 ga. steel (18 ga. backs) for durability and feature our special antimicrobial powder paint finish that fights bacterial growth and corrosion on locker surfaces in the classroom. Angle Iron Lockers Lyon Angle Iron lockers are available in 1-6 tier models. They feature our famous all-welded construction throughout for exceptional strength and durability PLUS 1" x 1" x 1/8" angle iron frame construction! Heavy duty 13 ga. expanded metal panels, providing 73% ventilation, or 16 ga. solid steel panels, are then welded to the angle iron door frames. An additional handle panel is welded to the center span of the door for even greater strength. Standard sides are constructed of 13 ga. expanded metal, or 16 ga. solid steel, with 18 ga. cold rolled steel backs. Shown with formed steel doors These lockers are also available with 14 ga. formed steel doors (single through nine tier models). A. A. Duplex Standard Lockers conserve floor space by providing two individual lockers in each frame. Each compartment is 7 1 2" wide, doors are hinged in center. Each compartment has a hat shelf and single prong coat hooks. B. Two Person Lockers are only 15" wide, with two full length coat compartments and two separate compartments at top. Doors are hinged in the center allowing simultaneous access for both users. Two Person Locker Sizes B. (per opening) W" x D" x H" 15 x 12 x 60 15 x 15 x 60 15 x 18 x 60 15 x 21 x 60 15 x 12 x 72 15 x 15 x 72 15 x 18 x 72 15 x 21 x 72 Duplex Standard Locker Sizes (per opening) W" x D" x H" 15 x 15 x 60 15 x 18 x 60 15 x 21 x 60 15 x 15 x 72 15 x 18 x 72 15 x 21 x 72 Locker Benches Heavy Duty Cast Iron Pedestal Design Provides solid footing for plastic laminate or laminated hardwood tops. Plastic Laminate with Enameled Steel Pedestal Design 12" wide x 18" high, and 3' to 12' long in 1 ft. increments. Laminated Hardwood with Enameled Steel Pedestal Design Selected hardwoods provide strength and beauty on painted steel pedestals with rustresistant durability. Eight different sizes 9 1 2" deep x 18" high, from 3 to 10 feet in length in 1 foot increments, deliver all the versatility, styling and performance required for varying floor plans and locker arrangements. Aluminum Pedestals are sold separately, and can be used with wood tops for free standing or moveable installations. LIFETIME PRODUCT WARRANTY Anodized Aluminum Design Combines sleek, contemporary look with strength and durability. Plus, the versatility of 4 popular sizes with adjustable pedestals. Rustproof, anodized aluminum is light, yet incredibly strong and easy to maintain in almost any environment. One piece bench stands are secured to pedestal base with adjustable clamps. Rounded edges and center traces provide comfortable, skid resistant seating. Use as portable bench or install as a fixed position unit. 8 Specify Lyon!