Phone Off.: 172-2652112, Sales: 172-575795 Director s Res.: 172-256114 Fax : 172- CONES/SPRING-POST/FLEXIBLE DIVIDERS PORTBLE CONES (FIBRE GLSS) 1. CONE FG TR CT PRT NO: GPL-15-1 Fibre glass TRINGULR CONE of total height 7mm with base 4x4x4mm. ll the three sides to have reflective sign and words (CUTION, MEN T WORK with sign of man working with showel) or (NO PRKING & STOP) or as per your specification specified. Top end provided with plastic hook for chain/rope. Cone of colour red/yellow/white. CT PRT No. GPL-15-1 Make: GREE/ B PORTBLE CONES (PLSTIC) 1. CONE PL RD CT PRT NO: GPL-16-1 Cautionary PORTBLE CONE made of plastic polymer colour Red of height 75 mm having wide square/hexagonal base provided with reflective sleeve width 15 mm having arrangement for plastic chain fixing. CT PRT No. GPL-16-1 Make: GREE/ 2. CONE PL TR CT PRT NO: GPL-16-11 Cautionary portable TRINGULR CONE made of plastic polymer colour Red/Yellow of height 75 mm having wide base 42 mm provided with reflective stickers (messages) on all the three sides with a hook at the top for plastic chain fixing. CT PRT No. GPL-16-11 Make: GREE/ C LNE DIVIDER (PLSTIC) 1. LNE DIVIDER PL CT PRT NO: GPL-31-1 Reflective lane divider having vertical flap made out of Engineering grade elastic repositionable EV plastic of red colour of total height 32mm. Top part provided with sheet reflector. Flap held firmly by a base platform 22 x 15 x 25 mm made of impact resistant yellow BS provided with 31 beaded strips. Two strips on each side making a total of 124 mini retro-reflective beads. Base provided with 4 steel zinc plated nails of 12mm dia, two of length 12mm and two of 9mm. CT PRT No. GPL-31-1 Make: GREE/ (For additional grip also use epoxy or rubber/bituminous adhesive to base and road). D FLEXIBLE SPRING POST (PLSTIC) TIN: 4847383 175 Industrial rea, Phase-II, Chandigarh - 16 2 (INDI) 1. SPRING POST PL CT PRT NO: GPL-31-11 Reflective cautionary flexible spring post provided with reflective strips at the top for fixing to road with bolts of colour orange/red of height 75 mm. CT PRT No. GPL-31-11 Make: GREE/ N O P RK ING LNE DIVIDER 2. SPRING POST PL CT PRT NO: GPL-31-11-1 Reflective cautionary flexible spring post provided with reflective bands at the top. Fixing to road with bolts. vailable in colour orange/red of height 7 mm. CT PRT No. GPL-31-11-1 Make: GREE/ 3. SPRING POST PL CT PRT NO: GPL-31-11-2 Reflective cautionary flexible spring post provided with reflective bands at the top. Fixing to road with bolts. vailable in colour orange/red of height 6 mm. CT PRT No. GPL-31-11-2 Make: GREE/ 4. SPRING POST PL CT PRT NO: GPL-31-11-3 Reflective cautionary flexible spring post provided with reflective bands at the top. Fixing to road with bolts. vailable in colour orange/red of height 3 mm. CT PRT No. GPL-31-11-3 Make: GREE/
Phone Off.: 172-2652112, Sales: 172-575795 Director s Res.: 172-256114 Fax : 172- MISCELLNEOUS OTHER REFLECTIVE PRODUCTS NON REFLECTIVE BS PLSTIC ND LUMINIUM STUDS 1. STUDS PL RD NR CT PRT NO: GPL-25-1 Non Reflective CIRCULR-STUD (PELI-STUD) 1mm dia made out of impact resistant BS plastic having ultra violet resistant colour (yellow/white/red) provided with a steel nail of dia 12mm of length 9mm. CT PRT No. GPL-25-1 Make: GREE/ Non Reflective CIRCULR-STUD (PELI-STUD) 125mm dia made out of impact resistant BS body plastic having ultra violet resistant colour (red/yellow/white) provided with a steel nail of dia 12mm of length 9mm. CT PRT No. GPL-25-2 Make: GREE/ Non Reflective stud made out of luminium casted body 1mm dia having a nail pin of length 9mm for imbedding to road. CT PRT No. GPL-26-1 Make: GREE/ B STEM BS-PLSTIC/LUMINIUM WITH STEEL L-KEY BOLT Stem BS Plastic size 32 mm hex of length 55 mm along with steel L-key bolt 12 mm dia. CT PRT No. GPL-1-1 Make: GREE/ Stem luminium hardend alloy 25 mm square hex of length 55 mm screwed for fixing with steel L-key bolt 12 mm dia. CT PRT No. GPL-25-1 Make: GREE/ TIN: 4847383 175 Industrial rea, Phase-II, Chandigarh - 16 2 (INDI) 2. STUDS PL RD NR CT PRT NO: GPL-25-2 3. STUDS L RD NR CT PRT NO: GPL-26-1 1. STEM-PL CT PRT NO: GPL-1-1 2. STEM-L CT PRT NO: GPL-1-1 C PLSTIC SPCER FOR RISING HEIGHT OF CT-EYE 1. SPCER-PL CT PRT NO: GPL-1-95 Plastic SPCER for any sized cat-eye i.e. 1 x 1 mm; 1 x 11 mm; 11 x 11 mm; 12 x 12 mm and thickness 3 mm or 5 mm. CT PRT No. GPL-1-95 Make: GREE/
Phone Off.: 172-2652112, Sales: 172-575795 Director s Res.: 172-256114 Fax : 172- TIN: 4847383 175 Industrial rea, Phase-II, Chandigarh - 16 2 (INDI) PTENT-PRODUCT: Patent PPL NO. 154/DEL/24 under Indian Patent ct :197. Manufactured by Greenlite (P) Ltd. Chandigarh under license from the inventor/patent right holder. ROD BERM (BS PLSTIC BODY) EXTREME-END REFLECTIVE INDICTIORS 1. ROD BERM PL REF CT PRT NO: GPL-3-1 Uni/dual/tri directional reflective extreme-end CURB STONE MOUNTED road berm indicator of impact resistant BS plastic body of size 1 x 75 x 11 mm having ultra-violet resistant colours (white/yellow/red) with high-intensity reflectors. Device provided with additional 31 mini-glass reflectors to a side imbedded in plastic strip base. For fixing, a steel rectangular tube has been provided with foot-base duly screwed with the device. CT PRT No. GPL-3-1 Make: GREE/ ROD LEVEL ROD-SIDE CURB-STONE PLSTIC HOUSING REFLECTOR MINI-GLSS-LE REFLECTORS SOIL GROUND CONCRET CEMENT FOR HOLDING CLMP STEEL CLMP 2. ROD BERM PL REF CT PRT NO: GPL-3-1 Uni/dual directional reflective extreme-end road berm VERTICL INDICTOR of impact resistant BS plastic body of size 8 x 5 x 16 mm having ultra-violet resistant colours (white/yellow/ red) with high intensity reflectors (white/yellow/red). Device provided with hardened steel nails for fixing. CT PRT No. GPL-3-1 Make: GREE/ PLSTIC DEVICE REFLECTOR ROD LEVEL HRDENED STEEL NIL CURB-STONE 3. ROD BERM PL REF CT PRT NO: GPL-3-2 Uni/dual directional reflective extreme-end SHOULDER MOUNTED road berm indicator of impact resistant BS plastic body of size 12 x 1 x 4 mm having ultra-violet resistant colours (white/yellow/ red) with high-intensity reflectors. Device provided with MS zinc plated nail 12 mm dia of length 12 mm for fixing to road edge/shoulder by hammering. CT PRT No. GPL-3-2 Make: GREE/ PLSTIC HOUSING REFLECTOR NIL ROD EXTREME BERM-END ROD LEVEL
Phone Off.: 172-2652112, Sales: 172-575795 Director s Res.: 172-256114 Fax : 172- SOLR CT-EYES ND SOLR DELINETORS SOLR CT-EYE 1. SOLR CT-EYE (DUL-DIRECTIONL) CT PRT NO: GPL-3-1 SRS BN Solar road stud having 3 LEDs of colours red/ yellow to a side (total 6 Nos) housed in a tough pressure die casted aluminum alloy of size 125 x125 mm or 12 x13mm with built in stem of suitable length for fixing with epoxy. LEDs, solar-cells, battery & light sensor well protected inside under tough unbreakable polycarbonate transparent sheet top. System workable for 2-3 days (nights) after full charge in 8-1 hours. CT PRT No. GPL-3-1 Make: GREE/ B 175 Industrial rea, Phase-II, Chandigarh - 16 2 (INDI) SOLR DELINETOR 1. SOLR DELINETOR CT PRT NO: GPL-13-1 SRD 6 Solar road delineator 6 LEDs of colour red/ yellow housed in plastic body. LEDs, solar-cells, battery and light sensor well protected inside polycarbonate sheet; device protected with powder coated wire mesh cage. System mounted over 47 mm dia steel tube powder coated of length 6 mm having sheet foot for firm grip to ground. Delineator to have additional reflective bands. System workable for 2-3 days (nights) after full charge for 8-1 hours. CT PRT No. GPL-13-1 Make: GREE/ Note: Delineators with extra height can also be made e.g. of height 75, 9 OR 1mm. TIN: 4847383
Phone Off.: 172-2652112, Sales: 172-575795 Director s Res.: 172-256114 Fax : 172- BOLLRDS, DIVERSION/BRRICDE PLTES, ISLND POST ETC. BOLLRD (STEEL) 1. CONICL BOLLRD ST CT PRT NO: GPL-21-1 Uni-directional reflective bollard made out of 18 gauge steel CRC sheet in conical shape having bottom dia 2mm and top dia 15mm of height 9mm. Base welded to a hexagonal sheet of 18 gauge CRC of size 3mm. Top end closed with a pair of steel sheet discs. Bollard to have a circular direction indicating sign of 3mm dia CRC sheet 18 gauge with frame of 25X3mm MS flat sign supported to pair of discs with a MS pipe of 2mm dia. ll heat process black coated and baked to 12 C OR powder coated to make all weather resistant over a coat of red oxide stoving metal primer base. Sign plate to have white reflective arrow over a blue reflective sheet base. Bollard to have reflective sheet base. Bollard to have 3 yellow reflective rings of 25mm dia. CT PRT No. GPL-21-1 Make: GREE/ 2. CURVED BOLLRD ST CT PRT NO: GPL-21-2 Uni-directional reflective bollard made out of 18 gauge steel CRC sheet 4 x 6 mm in curved-shape with 48 mm circular dia top and a definition plate 4 x 75 mm. ll mounted over a tube of 6 mm OD pipe of total height 18 mm. Curved plate supported by 25 x 3 mm MS strips at the back. ll heat process coated and baked to 12 C OR powder coated. Curved plate to have oblique reflective strips over a reflective base. Circular plate to have reflective base and arrow as directed. CT PRT No. GPL-21-2 Make: GREE/ B CHEVRON/SINGLE RROW SIGN (STEEL PLTE) PEDESTL TYPE CHEVRON/SINGLE RROW PLTE EG CT PRT NO: GPL-53-1 1. () Engineer Grade Reflective Sheeting Chevron/Single rrow diversion sign plate made out of 18 gauge CRC Steel sheet 3 x 45 mm welded and supported over a steel square 25 x 25 mm pipe frame of 16 gauge provided with legs of the same square pipe of suitable length to embed in PCC. ll steel frame and sign plate heat process black color coated and baked to 12 C OR powder coated to make it all weather resistant. Front side to have yellow Engineer Grade Reflective Sheeting by keeping inner arrows as black light absorbing. CT PRT No. GPL-53-1 Make: GREE/ CHEVRON/SINGLE RROW PLTE HIB 1. (B)High Intensity Reflective Sheeting Chevron/Single rrow diversion sign plate made out of 18 gauge CRC Steel sheet 3 x 45 mm welded and supported over a steel square 25 x 25 mm pipe frame of 16 gauge provided with legs of suitable length to embed in PCC. ll steel frame and sign plate heat process black color coated and baked to 12 C OR powder coated to make it all weather resistant. Front side to have yellow high-intensity (encapsulated) grade reflective Sheeting by keeping inner arrows as black light absorbing. CT PRT No. GPL-53-1 Make: GREE/ TIN: 4847383 175 Industrial rea, Phase-II, Chandigarh - 16 2 (INDI) C TWIN CHEVRON/DOUBLE RROW DIVERSION PLTE PEDESTL TYPE TWIN CHEVRON/DOUBLE RROW DIVERSION PLTE EG CT PRT NO: GPL-53-2 Twin Chevron/Double rrow diversion plate (Pedestal type) size 45 x 3 mm fully reflective with Engineer Grade white reflective base and red reflective two arrows. Plate of CRC steel sheet 18 gauge welded over a frame of a 25 mm square pipe of 16 gauge sheet. Frame supported over two legs of MS square pipe 38 x 38 mm of 16 gauge of length 1 mm each. Legs to have base plate for firm grip with ground. ll heat process coated and backed to 12 C OR powder coated to make it all weather resistant. CT PRT No. GPL-53-1 Make: GREE/ RROW DIRECTION Specify towards Right or Left?
C FIVE RROW DIVERSION PLTE EG FIVE RROW DIVERSION PLTE EG CT PRT NO: GPL-53-3 Diversion plate made out of 18 gauge CRC steel sheet 9 x 25 mm welded to a frame of 25 mm square pipe (16 g) supported over two legs made of 38 mm square pipe(16 g) of length 8 mm each. ll heat process coated and baked to 12 C OR powder coated to make it all weather resistant. Front side fully reflective with Engineer Grade Reflective white sheet and having 5 red reflective sheet arrows. CT PRT No. GPL-53-3 Make: GREE/ E ISLND POST (STEEL) ISLND-POST ST CT PRT NO: GPL-35-1 Island post semi circular made out of 18 gauge steel CRC sheet of dia 54mm and of height 3mm supported over three legs of MS angle iron 25 x 25 x 3mm of total height 6mm. ll stove enamelled yellow and baked to 12 C OR powder coated to make all weather resistant. Post provided with 22 nos signal red acrylic rectangular reflectors. ll fixed with machine screws. CT PRT No. GPL-35-1 Make: GREE/ F PORTBLE CUTIONRY TRINGLE OF MS PIPE12.5 MM (½ ) DI FRME PORTBLE CUTIONRY TRINGLE CT PRT NO: GPL-52-1 Portable cautionary triangle 6 x 6 x 6 mm made out of 18 gauge CRC sheet supported over type frame with one supporting back leg hinged to it made from 12.5 mm OD MS pipe of 16 gauge sheet. ll heat process coated and baked to 12 C OR powder coated over a coat of red oxide metal primer. Triangle to have reflective sheet words MEN T WORK, CUTION and ROD WORK with sign of man working with shovel at the centre. Legs to have plastic/rubber shoes. CT PRT No. GPL-52-1 Make: GREE/ CUTION R O D W OR K MEN T WORK