diego Blade and Burr Guide
Making a Better Powered Instrument diego Powered Dissector Blades save valuable time and help make you more productive. No other platform today combines superior dissection, ergonomic comfort and bipolar hemostasis like diego with PK Technology. In one device, you get a versatile, complete system that saves time and makes enhanced surgical precision possible. It s the ultimate tool for ENTs because it was designed by ENTs. BETTER BIPOLAR ENERGY with PK diego Many dreamed of it. Some have tried to create it. But only Gyrus ACMI has done it. Revolving nose cone puts blade manipulation at your fingertips diego gives you more options: Fast and easy setup and blade changes No separate irrigation tubing to connect directly to the blade Bipolar electro-surgery with PK blades An extensive line of procedure specific burrs and blades A 360º rotating nose cone to orient the blade s window with a quick, simple twist Aggressive and non-aggressive blade edgeforms for different tissue engagement Minimal clogging and superior fluid suction with PTFE-lined curved blades and inner hub seals PK diego combines the award-winning diego powered mechanical dissection platform with bipolar PK Technology, giving the surgeon the option to control normal bleeding. PK blades create a gentile hemostatic effect with minimal thermal spread and less smoke and char that are normally associated with monopolar electro-surgery. Power (watts) 40 35 30 25 20 15 10 5 PK diego Comparison 0 10 100 Load (log ohms) diego Conventional Electro-Surgery 1000
COMFORT. CONTROL. CONVENIENCE. SYSTEM COMPONENTS & ACCESSORIES Wireless Trigger Switch The new wireless trigger switch enables fingertip activation of the dissector motor providing an unprecedented level of control for the surgeon. 7033-8008 Wireless trigger, single use, box of 6 Powered Dissector Tube Set diego integrated suction and irrigation lines. 7033-8023 diego tube set, for use with all console models and pump configurations, includes cleaning stylets 7033-8003 diego tube set, for use with original console and pump configuration, includes cleaning stylets Cleaning Brush Kit Cleaning brush kit for diego handpiece 7033-8009 Cleaning brush kit, contains 6 sets of one large and one small brush Sterilization Tray 7033-8005 Aluminum sterilization tray for diego handpiece THE DIEGO SYSTEM CATALOG NUMBER DESCRIPTION 7033-9000 diego console, enabled for finger control of handpiece 7033-9050 PK diego console, enabled for finger control of handpiece 7033-8010 diego Starlink handpiece, compatible with BrainLAB Starlink, & universal adapters 7033-8012 & 7033-8013 7033-9001 diego handpiece, finger control enabled 7033-8011 diego footswitch, illuminated, green light 7033-9054 PK diego footswitch, includes coupler to connect diego and PK diego footswitches 7033-9053 diego and PK diego footswitch coupler 7033-9051 diego reposable cable with tube organizer, tested for 100 uses NOTE: diego blades, components and associated packaging do not contain latex.
SINUS APPLICATION BLADES (Straight) Aggressive 4 mm The new aggressive edgeform improves surgical precision through better tissue engagement and removal. A speed setting of 3000 rpms in oscillate mode is recommended. Edgeform: Aggressive 7013-8100 4 mm diameter 7013-9033 Hemostatic w/pk, diameter, SMR Serrated 4.8 mm 4.2 mm 4 mm 3.4 mm 2.9 mm 2 mm 7013-8000 4 mm diameter 7013-8035 3.4 mm diameter 7013-8001 2.9 mm diameter 7013-8033 2 mm diameter 7013-9000 Hemostatic w/pk, 4.2 mm diameter 7013-9002 Hemostatic w/pk, 4.8 mm diameter Smooth 4 mm Edgeform: Smooth 7013-8002 4 mm diameter, smooth round tip 7013-8003 4 mm diameter, smooth square tip Turbinate Blade 2 mm This blade is ideal for use in turbinate reduction procedures. An exclusive axial orientation line provides visual feedback on window orientation during the time the blade is inserted in the turbinate. Edgeforms: Serrated or smooth, elongated, aggressive 7013-8033 2 mm diameter, serrated 7013-8034 2 mm diameter, smooth, elongated 7013-9033 Hemostatic w/pk, diameter, aggressive, SMR Blades with PK Technology * create a gentle hemostatic effect with minimal thermal spread, along with less smoke and char that are normally associated with conventional monopolar electro-surgery. * Requires PK- Enabled Console.
SINUS APPLICATION BLADES (Curved) 15 o 4.8 mm 4 mm 2.9 mm Working End Geometry: Curved, angled 15 o Concave window orientation shown. 7013-8004 4 mm diameter, concave window 7013-8010 4 mm diameter, convex window 7013-8028 2.9 mm diameter, concave window 7013-9010 Hemostatic w/pk, 4.8 mm diameter, convex window 30 o 4 mm 2.9 mm Working End Geometry: Curved, angled 30 o 7013-8005 4 mm diameter, concave window 7013-8029 2.9 mm diameter, concave window 40 o 4 mm 2.9 mm Working End Geometry: Curved, angled 40 o 7013-8007 4 mm diameter, convex window 7013-8008 4 mm diameter, concave window 7013-8030 2.9 mm diameter, concave window 60 o 4 mm 2.9 mm Working End Geometry: Curved, angled 60 o 7013-8009 4 mm diameter, concave window 7013-8031 2.9 mm diameter, concave window 75 o 4 mm 2.9 mm Ideal for use in maxillary or frontal sinus procedures Working End Geometry: Curved, angled 75 o 7013-8027 4 mm diameter, concave window 7013-8032 2.9 mm diameter, concave window Smallest diameter curved blade available anywhere.
BURRS Cutting Burr Edgeform: Cutting, 8-flute, cross cut, barrel 7013-8011 bit diameter, shielded Curved Cutting Burr Working End Geometry: Curved, angled 60 o Edgeform: Cutting, 8-flute, cross cut, barrel 7013-8012 bit diameter, concave cutting, convex side shielded Diamond Burr Edgeform: Diamond, medium grit, barrel 7013-8013 bit diameter, shielded Curved Diamond Burr Working End Geometry: Curved, angled 60 o Edgeform: Diamond, medium grit, barrel 7013-8014 bit diameter, concave cutting, convex side shielded DCR Burr Working End Geometry: Curved, angled 18 o Edgeforms: Cutting, 6-flute or diamond, ball 7013-8018 bit diameter, concave cutting, convex side shielded 7013-8049 bit diameter, medium diamond, convex side shielded Frontal Trephination Kit Frontal trephination burr and accessories. 7013-8017 Frontal trephination, disposable components only: Trephine drill bit, 2 mm Guide wire Syringe, 20cc Irrigating cannula and tube set 7013-8019 Frontal trephination drill guide (reusable), 2.25 mm inside diameter 7013-8020 Frontal trephination, full set, includes all components from both 7013-8017 & 7013-8019
NASOPHARYNGEAL & LARYNGEAL APPLICATION BLADES 15 o 4.8 mm 4 mm Working End Geometry: Curved, angled 15 o 7013-8004 4 mm diameter, concave window 7013-9010 Hemostatic w/pk, 4.8 mm diameter, 15º convex window 40 o 4 mm Working End Geometry: Curved, angled 40 o 7013-8008 4 mm diameter, concave window 7013-8007 4 mm diameter, convex window Tonsil & Adenoid 4.8 mm 4 mm Working End Geometry: Curved, angled 15º & 40º Convex window orientation shown. 7013-8006 4 mm diameter, 40º convex window, T&A 7013-8010 4 mm diameter, 15º convex window, tonsils 7013-9006 Hemostatic w/pk, 4.8 mm diameter, 40º convex window, T&A 7013-9010 Hemostatic w/pk, 4.8 mm diameter, 15º convex window, tonsils Debulking 4 mm 3.2 mm Working End Geometry: Double bend, laryngeal, 18º distal angle, debulking Supraglottic 7013-8015 4 mm diameter, 22 cm, concave window 7013-8021 3.2 mm diameter, 22 cm, concave window Subglottic 7013-8023 4 mm diameter, 27 cm, concave window 7013-8025 3.2 mm diameter, 27 cm, concave window Superficial 4 mm 3.2 mm Working End Geometry: Double bend, laryngeal, 18º distal angle Edgeform: Smooth, superficial Supraglottic 7013-8016 4 mm diameter, 22 cm, concave window 7013-8022 3.2 mm diameter, 22 cm, concave window Subglottic 7013-8024 4 mm diameter, 27 cm, concave window 7013-8026 3.2 mm diameter, 27 cm, concave window
Manufactured by: Gyrus ENT, L.L.C. 2925 Appling Road Bartlett, TN 38133 TEL 901-373-0200 FAX 800-757-2942 Sales Locations: USA Gyrus ACMI L.P. 6655 Wedgwood Rd, Ste 160 Maple Grove MN 55311 TEL 763-416-3000 FAX 763-463-1200 Canada ACMI Canada, Inc. 200 Bond Street West, Unit 104 Oshawa, Ontario L1J 2L7 Canada TEL +1 (905) 432-9802 FAX +1 (905) 571-4044 UK Gyrus International Ltd. 410 Wharfedale Road Winnersh Triangle Berkshire RG41 5RA United Kingdom TEL +44 (0) 1189-219700 FAX +44 (0) 1189-219800 Australasia Gyrus Australasia Pty Ltd 200 Lorimier Street Port Melbourne Victoria 3207 Australasia TEL +61(0) 3-9279-7600 FAX +61(0) 3-9279-7699 For more information call 800.262.3540 For order inquiries call 800.773.4301 Visit us at www.gyrusacmi.com 2006 Gyrus ENT, L.L.C. All Rights Reserved. PK Technology, diego and the diego logo are trademarks of Gyrus Group PLC or its subsidiaries. GYRUSMEDICAL GmbH Gotenstrasse 3 D 78532 Tuttlingen Postfach 280 D 78503 Tuttlingen Tel. +49 (0) 7462-94 58-0 Fax +49 (0) 7462-94 58-99 info@gyrusacmi.de www.gyrusacmi.de THE VISION TO SEE. THE POWER TO TREAT. REV 8/06 7060-0309