Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner.

60W Single Output Industrial DIN Rail ower Supply DR-60 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED OWER VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETU, RISE TIME HOLD U TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) OVERLOAD OVER VOLTAGE WORKING TEM. TEM. COEFFICIENT VIBRATION SAFETY STANDARDS HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION ACKING DR-60-5 DR-60-12 DR-60-15 DR-60-24 5V 12V 15V 24V 6.5A 4.5A 4A 2.5A 0 ~ 6.5A 0 ~ 4.5A 0 ~ 4A 0 ~ 2.5A 32.5W 54W 60W 60W RILE & NOISE (max.) Note.2 80mVp-p 120mVp-p 120mVp-p VOLTAGE TOLERANCE Note.3 WORKING HUMIDITY ENVIRONMENT STORAGE TEM., HUMIDITY SAFETY & EMC (Note 4) WITHSTAND VOLTAGE ISOLATION RESISTANCE EMI CONDUCTION & RADIATION 4.75 ~ 5.5V 11.1 ~ 13.2V 13.5 ~ 16.5V 150mVp-p 21.6 ~ 26.4V 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 100ms, 30ms/230VAC 100ms/230VAC 88 ~ 264VAC 124 ~ 370VDC 47 ~ 63Hz 200ms, 30ms/115VAC at full load 23ms/115VAC at full load 76% 82% 83% 84% 1.2A/115VAC 0.8A/230VAC COLD START 18A/115VAC 36A/230VAC 105 ~ 160% rated output power rotection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V rotection type : Shut down o/p voltage, re-power on to recover -20 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 UL60950-1, TUV EN60950-1 approved, Design refer to EN50178 I/-O/:3KVAC I/-O/:100M Ohms/500VDC Compliance to EN55011,EN55022 (CISR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A 216.2K hrs min. MIL-HDBK-217F (25 ) 78*93*56mm (W*H*D) 0.3Kg; 48pcs/15.4Kg/1.02CUFT File Name:DR-60-SEC 2008-04-07

60W Single Output Industrial DIN Rail ower Supply DR-60 s e ries Mechanical Specification Case No.918B Unit:mm 68 45 47 56 27.4 Terminal in No. Assignment in No. Assignment in No. 1 AC/N 5,6 2 3,4 AC/L +V 7 8 Assignment -V LED +V ADJ. 46.5 93 3 46.5 ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15 35 78 12.2 5 5 5 37.75 5 6 5 4 3 2 1 7 8 Block Diagram I/ EMI FILTER RECTIFIERS & FILTER OWER SWITCH- ING RECTIFIERS & FILTER +V -V O.L.. WM CONTROL DETECTION CIRCUIT O.V.. Derating Curve 100 80 60 LOAD (%) 40 20-20 0 10 20 30 40 50 60 70 (VERTICAL) AMBIENT TEMERATURE ( ) File Name:DR-60-SEC 2008-04-07

60W Single Output Industrial DIN Rail ower Supply MODEL:DR-60-12 OUTUT FUNCTION TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 RILE & NOISE V1: 120 mvp-p (Max ) I/: 230VAC O/:FULL LOAD V1: 12 mvp-p (Max ) 2 OUTUT VOLTAGE ADJUST RANGE CH1: 11.1V~ 13.2V I/: 230 VAC I/: 115 VAC O/:MIN LOAD 10.94 10.94 V~ V~ 13.49 13.49 V/ 230 VAC V/ 115 VAC 3 OUTUT VOLTAGE TOLERANCE V1: 1 %~ -1 % (Max) I/: 85 VAC / 264 VAC O/:FULL/ MIN LOAD V1: 0.4 %~ -0.4 % 4 LINE REGULATION V1: 1 %~ -1 % (Max) I/: 85VAC ~ 264 VAC O/:FULL LOAD V1: 0 %~ 0 % 5 LOAD REGULATION V1: 1 %~ -1 % (Max) I/: 230 VAC O/:FULL ~MIN LOAD V1: 0.4 %~ -0.4 % 6 SET U TIME 7 RISE TIME 8 HOLD U TIME 230VAC: 100 ms (Max) I/: 230 VAC 230VAC/ 85 ms 115 VAC: 200 ms (Max) I/: 115 VAC 115VAC/ 137 ms O/:FULL LOAD 230VAC: 30 ms (Max) I/: 230 VAC 230VAC/ 22 ms 115VAC: 30 ms (Max) I/: 115 VAC O/:FULL LOAD 115VAC/ 22 ms 230VAC: 50 ms (TY) I/: 230 VAC 230VAC/ 127 ms 115VAC: 18 ms (TY) I/: 115 VAC 115VAC/ 28 ms O/:FULL LOAD 9 OVER/UNDERSHOOT TEST < +5% I/: 230 VAC O/:FULL LOAD 10 DYNAMIC LOAD V1: 1200 mvp-p I/: 230 VAC O/:FULL /Min LOAD 90%DUTY/1KHZ TEST: <5 % 219 mvp-p Model: DR-60-12 Test Report 1 / 5

60W Single Output Industrial DIN Rail ower Supply INUT FUNCTION TEST N O TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 INUT VOLTAGE RANGE 85VAC~264 VAC) I/:TESTING O/:FULL LOAD I/: LOW-LINE-3V= 82 V HIGH-LINE+15%=300 V O/:FULL/MIN LOAD ON: 30 Sec. OFF: 30 Sec 10MIN ( AC OWER ON/OFF NO DAMAGE ) 59 V~264V TEST: OK 2 INUT FREQUENCY RANGE 47HZ ~63 HZ NO DAMAGE OSC I/: 85 VAC ~ 264 VAC O/:FULL~MIN LOAD 3 EFFICIENCY 82.5 % (TY) I/: 230 VAC 4 INUT CURRENT O/:FULL LOAD TEST: OK 82.5 % 230V/ 1 A (TY) I/: 230 VAC I = 0.57 A/ 230 VAC 115V/ 1.8 A (TY) I/: 115 VAC O/:FULL LOAD I = 0.89 A/ 115 VAC 5 INRUSH CURRENT 230V/ 40 A (TY) I/: 230 VAC I = 31 A/ 230 VAC 115V/ 30 A (TY) COLD START I/: 115 VAC O/:FULL LOAD I = 16 A/ 115 VAC ROTECTION FUNCTION TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 OVER LOAD ROTECTION 105 %~ 160 % I/: 230 VAC I/: 115 VAC O/:TESTING 133 %/ 230 VAC 137 %/ 115 VAC Foldback Current Limiting 2 OVER VOLTAGE ROTECTION CH1: 13.8 V~ 16.2 V I/: 230 VAC I/: 115 VAC O/:MIN LOAD 15.1 V/ 230 VAC 15.1 V/ 115 VAC Shunt down Re- power ON 3 SHORT ROTECTION SHORT EVERY OUTUT 1 HOUR NO DAMAGE I/: 264 VAC O/:FULL LOAD NO DAMAGE Foldback Current Limiting Model: DR-60-12 Test Report 2 / 5

60W Single Output Industrial DIN Rail ower Supply ENVIRONMENT TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 TEMERATURE RISE TEST MODEL: DR-60-24 1. ROOM AMBIENT BURN-IN:2 HRS I/: 230VAC O/: FULL LOAD Ta= 27.6 2. HIGH AMBIENT BURN-IN:2.5 HRS I/: 230VAC O/: FULL LOAD Ta= 44.5 NO osition /N ROOM AMBIENT Ta= 27.6 HIGH AMBIENT Ta= 44.5 1 LF1 LF155 74.9 90.5 2 D1 HER206 2A/600V REC 90.3 104.3 3 ZD1 1.5KE440A 91.9 106.9 4 BD1 D3SB60 4A/600V SHI 71.6 86.8 5 C5 180U/400V NCC 105 T 68.6 83.8 6 Q1 K3673 10A/700V FUJI 89.9 105.8 7 Q2 TI122 5A/100V FAIR 71.2 88.4 8 T1 COIL TF-1210 92.5 107.8 9 D100 BYQ28X-200 10A/200V H 81.5 96.2 10 C107 560U/35V NCC 105 KY 81.1 96.3 11 U1 TI3842 64.7 80.8 12 C51 4.7U/50V CAX 105 KM 46.3 62.0 13 14 15 2 OVER LOAD BURN-IN TEST NO DAMAGE 1 HOUR ( MIN ) 3 LOW TEMERATURE TURN ON AFTER 2 HOUR TURN ON TEST I/: 230 VAC O/: 140 % LOAD I/: 230 VAC O/: 100 % LOAD Ta= -20 TEST:OK TEST:OK 4 HIGH HUMIDITY HIGH TEMERATURE HIGH VOLTAGE TURN ON TEST 5 TEMERATURE COEFFICIENT AFTER 12 HOURS IN CHAMBER ON CONTROL 45 I/: 272 VAC O/:FULL LOAD Ta= 45 NO DAMAGE HUMIDITY= 95 %R.H + 0.03 %(0~50 ) I/: 230 VAC O/:FULL LOAD 6 VIBRATION TEST 1 Carton & 1 Set (1) Waveform: Sine Wave (2) Frequency:10~500Hz (3) Sweep Time:10min/sweep cycle (4) Acceleration:2G (5) Test Time:1 hour in each axis (X.Y.Z) (6) TEST:OK + 0.01 %(0~50 ) TEST:OK Model: DR-60-12 Test Report 3 / 5

60W Single Output Industrial DIN Rail ower Supply SAFETY TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 WITHSTAND VOLTAGE I/-O/: 3 KVAC/min I/-O/: 3.6 KVAC/min I/-O/: 2.7 ma NO DAMAGE 2 ISOLATION RESISTANCE I/-O/:500VDC>100MΩ I/-O/: 500 VDC 3 AROVAL TUV: Certificate NO :R50058736 UL: File NO:E183223 I/-O/: 707 MΩ NO DAMAGE E.M.C TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 HARMONIC EN61000-3-2 CLASS A I/: 230 VAC/50HZ O/:FULL LOAD ASS 2 CONDUCTION EN55022 CLASS B I/: 230 VAC (50HZ) O/:FULL/50% LOAD ASS Test by certified Lab 3 RADIATION EN55022 CLASS B I/: 230 VAC (50HZ) O/:FULL LOAD ASS Test by certified Lab 4 E.S.D EN61000-4-2 INDUSTRY AIR:8KV / Contact:4KV I/: 230 VAC/50HZ O/:FULL LOAD CRITERIA A 5 E.F.T EN61000-4-4 INDUSTRY INUT: 2KV I/: 230 VAC/50HZ O/:FULL LOAD CRITERIA A 6 SURGE IEC61000-4-5 INDUSTRY L-N :2KV I/: 230 VAC/50HZ O/:FULL LOAD CRITERIA A 7 Test by certified Lab & Test Report repare M.T.B.F & LIFE CYCLE CALCULATION NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 CAACITOR LIFE CYCLE SUOSE C 107 IS THE MOST CRITICAL COMONENT I/: 230VAC O/:FULL LOAD Ta= 25 LIFE TIME= 75925 HRS I/: 230VAC O/:FULL LOAD Ta= 45 LIFE TIME= 21399 HRS 2 MTBF MIL-HDBK-217F NOTICES2 ARTS COUNT TOTAL FAILURE RATE: 216.2K HRS Model: DR-60-12 Test Report 4 / 5

60W Single Output Industrial DIN Rail ower Supply COMONENT STRESS TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 ower Transistor ( D to S) or (C to E) eak Voltage Q 1 Rated 2SK3673 : 700 V 10A I/:High-Line +3V = 267 V O/: (1)Full Load Turn on (2) Full Load (3)Output Short (1) 680 V (2) 670 V (3) 608 V 2 Diode eak Voltage D100 Rated YG805C10 : 100 V 10 A I/:High-Line +3V = 267 V O/: (1)Full Load Turn on (2) Full Load (3)Output Short (1) 60 V (2) 66 V (3) 52 V 3 Clamp Diode eak Voltage D1 Rated I/:High-Line +3V = 267 V (1) 382 V HER206 : 600V 2A O/: (1)Full Load (2) 386 V (2) Dynamic Load 90%Duty/1KHz 4 Input Capacitor Voltage C 5 Rated : 180u / 400 V/ 105 I/:High-Line +3V = 267 V O/: (1)Full Load Turn on /Off (2) Min load Turn on /Off (3)Full Load /Min load Change (1) 384 V (2) 384 V (3) 384 V 5 Control IC Voltage Test U1 Rated I/:High-Line +3V = 267 V (1) 16 V TL3842 : 30 V O/: (1)Full Load Turn on /Off (2) 17 V (2) Min load Turn on /Off (3)Full Load /Min load Change (30 16 V DATE SAMLE TEST RESULT TESTER AROVAL 2005/1/7 RD SAMLE ASS VINCENT TSENG MAX 2005/4/25 RODUCT SAMLE W0503C02 ASS VINCENT TSENG MAX 2003/12/12 A50-F023 Model: DR-60-12 Test Report 5 / 5