TECHNICAL INFORMATION
ISO 900 Certification was achieved in December 997, and reflects the strict adherence to quality management techniques from the first day of production. This certification was given by ASTA and also covers the inhouse design and development department, which is continuously designing new products for the extension of the EDISON range. Saudi Arabian Standards Organistaion (SASO) To meet the requirements of the deserts climatic conditions, EDISON wiring accessories have been designed and tested so as to conform to the stringent SASO specifications. Compliance with International Standards of quality has always been a prerequisite in the design and development of all EDISON accessories. Inhouse type testing capability has been established with a fully equipped laboratory, capable of carrying out all the tests specified in the relevant standards. This laboratory has been invaluable, both for quality control and for product development, reducing substantially the time to develop new products. CE marking requirements are met by all EDISON products which fall within the scope of the relevant EU directives. For these CE marked products, a technical file is available for inspection according to the CE marking requirements, confirming that these products comply with European safety regulations under the EMC and LV directives. A 0 year guarantee is provided by Interplast on all EDISON accessories (except those containing electronics) proving Interplast s commitment to quality, to the EDISON range and to the electrical industry. 34
TECHNICAL INFORMATION TERMINAL CAPACITIES MAXIMUM NUMBER OF CONDUCTORS PER TERMINAL PRODUCT DESCRIPTION 0AX WAY & WAY SWITCHES INTERMEDIATE SWITCH PRESS SWITCH / BELL SWITCH 300 & 500W DIMMER SWITCHES 000, 500 & 000 W DIMMERS FAN REGULATOR 0 & 3 AMP DP SWITCHES 0 & 3 AMP FLEX OUTLET PLATE 45 AMP DP SWITCHES L & N 45 AMP DP SWITCHES EARTH 3AMP SOCKETS & SPUR UNITS 5 AMP SOCKETS UNIVERSAL SOCKETS L & N UNIVERSAL SOCKETS EARTH.5 4 4 4 8 8 8 8 8 4 8 CONDUCTOR CROSS SECTION ( sq mm ).5 5 5 8 5 5 5 5 4.0 3 3 5 3 3 3 3 6.0 3 0.0 6.0 MOUNTING BOX REQUIREMENTS PRODUCT DESCRIPTION 0AX / 0AX & WAY SWITCHES INTERMEDIATE SWITCH PRESS SWITCH / BELL SWITCH 300 & 500W DIMMER SWITCHES 000, 500 & 000 W DIMMER SWITCHES FAN REGULATOR 0 AMP DOUBLE POLE SWITCHES 0 & 3 AMP FLEX OUTLET PLATES 3 AMP DOUBLE POLE SWITCHES 45 AMP DOUBLE POLE SWITCH 3 AMP SOCKETS AND SPUR UNITS MINIMUM DEPTH OF MOUNTING BOX (mm) 47 PRODUCT DESCRIPTION 5 / 5 AMP SOCKETS UNIVERSAL SOCKETS A SOCKET 6A SCHUKO TV / SAT / TEL MINIMUM DEPTH OF MOUNTING BOX (mm) 5 5 47 5 All EDISON electrical accessories are suitable for use with both flush mounting and surface mounting boxes. The table above Indicates the minimum depth of mounting box required for each EDISON product.
TECHNICAL INFORMATION STANDARDS & SPECIFICATIONS SWITCHES Ref. Std : BS EN 60669 : 000 BS 5733 where applicable Rated voltage : 50V ac 50 Hz DIMMER SWITCHES Ref. Std : BS EN 60669 : 000 BS EN 5505 Low voltage Directive 73/ 3/ EEC EMC Directive 89 / 336/ EEC RJ 45 DATA OUTLET Ref. Std : BS EN 5073 IEC 80 TIA / EIA 568A TIA / EIA TSB 40A Rating : Cat 5e Module comes with 568A/B wiring schedule labels. RJ / TELEPHONE MODULE Ref. Std : BS 63 :. BS 5733 (where applicable) Termination : IDC Connector SOCKETS BRITISH STANDARD SOCKETS A, 5A, 5A Sockets Ref. Std : BS 546 Rated voltage : 50V ac 50 Hz 3A Sockets Ref. Std : BS 363 Rated voltage : 50V ac 50 Hz OTHER SOCKET OUTLETS 6A P+E Socket Ref. Std : DIN VDE 060 (VDE 060) IEC 60884 Rated voltage : 50V ac 50 Hz Indian 6/6A Socket Ref. Std : IS 93 Rated voltage : 50V ac 50 Hz 5A American Socket (SASO) Ref. Std : SSA 444 : 985 Rated voltage : 7V ac 50 / 60 Hz 6A Universal Socket Ref. Std : BS 5733 (where applicable) Rated voltage : 50V ac 50 Hz 3A FUSE CONNECTION UNIT (SPUR UNIT ) Ref. Std : BS 363 4 Rated voltage : 50V ac 50 Hz MASTER / SECONDARY ( UK TYPE) Telephone Module Ref. Std : BS 63 :. BS 5733 (where applicable) Termination : IDC Connector TV MODULE Standard coaxial socket Ref. Std : BS 5733 (where applicable) BS EN 50083 (where applicable) SAT MODULE Standard F type Connector Ref. Std : BS 5733 (where applicable) 36
WAY SWITCHES WAY SWITCHES L C L C C LAMP LAMP N N INTERMEDIATE SWITCHES DOUBLE POLE SWITCHES L C L C LAMP FEED NEON LAMP L LOAD N N N ONE WAY WIRING DIMMER SWITCHES TWO WAY WIRING L L FEED FEED N C L L LAMP N C L L C L L LAMP WAY DIMMER WAY SWITCH 37
MODULE MODULE 3 MODULE 4 MODULE 4 MODULE WITH RIB 9 60 0 50 50 50 50. 50. 5 00.8 46.6 50. 50. 50. 75.4 50. 0 46.6 46.6 6 MODULE 8 MODULE BLANK GANG BLANK GANG MODULE (Rect.) 9 50. 0 50. 6 46.6 46.6 50. 0 50. 8 MODULE MODULE 6 MODULE 8 MODULE 9 9 50. 0 46 50. 0 0 50. 6 60 50. 0 0 38
/ MODULE 3/4 MODULE 4 MODULE WITH RIB 6 MODULE 8 MODULE (Rect.) 60 0.6 0.6 95 60 40 60 70 30 0.6 66 8 MODULE (Sq.) MODULE 6 MODULE MODULE (Rect.) 95 60 8 MODULE SUPPORT FRAMES FOR SURFACE MOUNTING 68 68 60.3 0.6 46.5 95 39
SURFACE MOUNTING BOX (Ref std BS 466). Prepare the cable trails in the mounting box. SUPPORT FRAME (for surface/panel mounting). Place the support frame on the mounting box. FRAME 3. Install the frame on to the mounting box using two mounting screws. MOUNTING SCREW SWITCH MODULE 4. Wire the switch module and click on to the frame. FRONT PLATE 5. Finally clip on the front plate to the frame. 40
FLUSH MOUNTING BOX (Ref std BS 466). Prepare the cable trails in the mounting box. FRAME. Install the frame on to the mounting box using two mounting screws. MOUNTING SCREW SWITCH MODULE 3. Wire the switch module and click on to the frame. FRONT PLATE 4. Finally clip on the front plate to the frame. 4
WEATHERPROOF INSTALLATION PRODUCT FEATURES INSTALLATION INSTRUCTIONS EDISON Weatherproof Accessories enclosure has been elegantly designed, and has been made from a tough Polycarbonate material suitable for use either outdoors or indoors. These products offer a protection rating of IP 56, provided they are properly installed and the enclosure lid is closed. This enclosure is intended for surface mounting. SAFETY INSTRUCTIONS Warning : SWITCH OFF AND ISOLATE THE MAINS SUPPLY BEFORE CARRYING OUT INSTALLATION OF THIS PRODUCT.. This product must be installed by a competent person (e.g. a qualified electrician) in accordance with the instructions and in accordance with the appropriate clause of the latest edition of the IEE wiring regulations.. When installing socket products an earth continuity conductor must be provided from the origin of the installation to the earth terminal of the socket outlet. This earth conductor must be sleeved inside the enclosure. 3. If metal conduit is used in more than one cable entry, earth continuity must be maintained between conduits. Caution : ENSURE THAT PAINT, CHEMICALS, OR WOOD PRESER VATIVES DO NOT COME INTO CONTACT WITH THIS PRODUCT.. Read the safety instructions.. The enclosure must be mounted on a flat, clean, dry vertical surface (free from grease, dirt and loose material). 3. a. Mark the position of the fixing holes on the wall, for the enclosure box. (see sketch ) b. Drill holes and fit suitable wall plugs for securing screw. 4. Carefully remove the cable entry cap or break one or more knockouts, as required and fit the cable gland (not provided) suitable for 0 mm conduit. 5. Secure the enclosure box to the wall with two suitable screws (not provided). 6. Align and install conduit as required. 7. Complete wiring connections to the accessory terminals (on frame / lid assembly). Ensure that cables are not stressed and terminals are fully tightened. 8. Locate the Frame/Lid assembly to the enclosure box (see sketch ). 9. Ensure that holes are aligned and the gasket is seated properly on the enclosure box. 0. Open the lid and secure to the box, using the four captive screws provided. Do not over tighten the screws. NOTE: To maintain IP rating of this product, the lid must be closed and latched. CAP KNOCK OUT 40 SKETCH ENCLOSURE BOX TOP TOP 4 40 FIXING SCREWS (NOT SUPPLIED) FRAME LID ASSEMBLY CAPTIVE SCREW SKETCH 4
SPUR UNITS MODULES & ACCESSORIES
MODULES & ACCESSORIES SWITCHES Item Code : ERA 0 WH Item Code : ERA WH Item Code : ERA WH Item Code : ERA 3 WH Item Code : ERA 0 WH Item Code : ERA WH Item Code : ERA 30 WH Item Code : ERA 3 WH Item Code : ERA 40 WH Item Code : ERA 4 WH Item Code : ERA 50 WH Item Code : ERA 5 WH Item Code : ERA 60 WH Item Code : ERA 6 WH Item Code : ERA 70 WH Item Code : ERA 0 WH Item Code : ERA WH Item Code : ERA WH Item Code : ERA 3 WH Item Code : ERA 0 WH Item Code : ERA WH Item Code : ERA 0 WH Item Code : ERA WH Item Code : ERA WH Item Code : ERA 3 WH Item Code : ERA 0 WH Item Code : ERA WH 44 Item Code : ERA 30 WH Item Code : ERA 3 WH Item Code : ERA 40 WH Item Code : ERA 4 WH Item Code : ERA 50 WH Item Code : ERA 5 WH Item Code : ERA 0 WH Item Code : ERA WH Item Code : ERA WH
MODULES & ACCESSORIES SWITCHES Item Code : ERA 3 WH Item Code : ERA 0 WH Item Code : ERA WH Item Code : ERA 0 WH Item Code : ERC WH Item Code : ERC WH Item Code : ERC 3 WH Item Code : ERC 0 WH Item Code : ERC WH Item Code : ERC WH Item Code : ERC 3 WH Item Code : ERC 30 WH Item Code : ERC 3 WH Item Code : ERC 3 WH Item Code : ERC 33 WH Item Code : ERD 0 WH Item Code : ERD WH Item Code : ERD WH Item Code : ERD 3 WH Page No : 0 Item Code : ERB 0 WH Page No : 0 Item Code : ERB 0 WH Page No : 0 Item Code : ERB 30 WH Page No : 0 Item Code : ERB 40 WH Page No : 0 Item Code : ERB 60 WH Page No : 0 Item Code : ERB 0 WH Page No : 0 Item Code : ERB 0 WH Page No : 0 Item Code : ERB 30 WH Page No : 0 Item Code : ERB 40 WH Page No : Item Code : ERB 50 WH Page No : Item Code : ERB 60 WH Page No : Item Code : ERB 70 WH Page No : Item Code : ERB 50 WH Page No : Item Code : ERB 60 WH Page No : Item Code : ERC 90 WH Page No : Item Code : ERC 390 WH Page No : Item Code : ERD 90 WH Page No : 45
MODULES & ACCESSORIES SPUR UNITS SOCKETS Item Code : ERE 30 WH Item Code : ERE 3 WH Item Code : ERE 330 WH Item Code : ERE 34 WH Item Code : ERE 0 WH Item Code : ERE 0 WH Item Code : ERE 3 WH Item Code : ERE 80 WH Item Code : ERE 8 WH Item Code : ERE 40 WH Item Code : ERE 50 WH Item Code : ERE 5 WH Item Code : ERE 70 WH Item Code : ERE 80 WH Item Code : ERE 40 WH Item Code : ERE 40 WH Item Code : ERE 70 WH Item Code : ERE 770 WH COMMUNICATION ACCESSORIES Item Code : ERE 730 WH Item Code : ERE 740 WH Item Code : ERE 750 WH Item Code : ERE 60 WH Item Code : ERF 0 WH Page No : 0 Item Code : ERF 0 WH Page No : 0 Item Code : ERF 30 WH Page No : 0 Item Code : ERF 40 WH Page No : 0 Item Code : ERF 40 WH Page No : 0 OTHER MODULES FLUORESCENT SWITCH Item Code : ERF 50 WH Page No : 0 Item Code : ERF 30 WH Page No : 0 Item Code : ERF 80 WH Page No : 0 Item Code : ERB 70 WH Page No : Item Code : ERB 50 WH Page No : Item Code : ERB 60 WH Page No : Item Code : ERC 90 WH Page No : 46
MODULES & ACCESSORIES Finish : WOOD BURL Code : WB Finish : WOOD GRAIN Code : WG Finish : WHITE MARBLE Code : WM Finish : GREEN MARBLE Code : GM 47
MODULES & ACCESSORIES WEATHERPROOF 48