Rain Cover to suit Universal Bucket Apron Part No: TENM419 Rain cover to suit universal bucket apron Fixes to press studs Bucket Tool Trays Part No: 05-9 Series Provides safe and convenient storage on bucket 05-955 05-951 Part No Mounting in Bucket 05-919-1 610 (D) x 160 (W) x 430 (L) Outside 7.7 05-918-1 190 (D) x 150 (W) x 355 (L) Outside/Inside 1.7 05-951 190 (D) x 150 (W) x 355 (L) Outside 3.6 05-955 190 (D) x 150 (W) x 510 (L) Outside 4.6 05-918-1 Part No: 05-929-1 4 removable compartments Suits Buckets 508 (L) x 203 (W) x 152 (D) Maximum 40mm wide (85mm lip if outside) 3.7 Bucket Tray Socket Holder Part No: 05-9 Series Provides safe and convenient storage on bucket Holds set of deep sockets 12mm 25mm Can also be attached to 05-830 Tool Board Part No Suits Bucket 05-977 290mm (L) x 50mm (W) x 50mm (D) With liner 1.6 05-976 290mm (L) x 50mm (W) x 50mm (D) Without liner 1.6 M13 Quality Electrical Equipment for Generation, Transmission & Distribution
Bucket Tool Board Part No: 05-8 Series backing board Bracket enables tool board to be easily installed/removed without tools Features 4 pocket leather tool pouch, knife pouch and 4 nylon loops The utility bags 05-829 & 05-825 are made from heavy duty cordura with a wide leather loop riveted on the top for easy access with rubber gloves The socket holder 05-830 is made from fibreglass Other styles and configurations available upon request Bucket hooks not included Part No 05-829 460 (W) x 490 (L) 2.1 05-830 460 (W) x 490 (L) 2.5 05-825 460 (W) x 490 (L) 1.8 Bucket Hooks Part No: Various Supplied as pair (2 included) Picture Part No Suits bucket lips Diameter (mm) 10-126 PVC 76 0.3 10-005 PVC 57 0.3 10-000 PVC 57 0.4 05-947 Plastic 80 0.3 10-118 Polymer 57 0.3 10-148 PVC 51 0.2 Bucket Impact Wrench Holders Part No: REL-IH-H Top bracket can be moved for left or right handed operation, in or outside bucket Securing strap Holds drill with auger still in chuck Suits common industry impact wrenches Part No Suit Bucket Lips (mm) REL-IH-H 38 76 3.0 www.tengroup.com.au 1300 ASK TEN M14
Part No: 05-8 Series Top bracket can be moved for left or right handed operation, in or outside bucket Velcro securing strap Holds drill and protects auger still in chuck Includes auger holder on side (2 augers max) Part No Suit Bucket Lips Suits Drills 05-831 Maximum 50mm wide 2.3 Common industry impact wrenches 05-833 Maximum 100mm wide 2.3 Part No Description P19157 L Bracket to suit 05-831 0.5 P19189 L Bracket to suit 05-833 0.5 Part No: 05-8 Series Nylon (Non conductive) drill holster Top bracket can be moved for left or right handed operation, in or outside bucket Velcro holding strap for transporting Holds drill with auger still in chuck Part No Suit Bucket Lips Suits Drills 05-832 Maximum 50mm wide 1.1 Common industry impact wrenches 05-834 Maximum 100mm wide 1.2 Part No Description P19157 L Bracket to suit 05-832 0.5 P19189 L Bracket to suit 05-834 0.5 Bucket Saw Holder, Hydraulic/Petrol Chain Saw - Fibreglass Part No: 05-9 Series Provides safe and convenient storage on bucket, preventing accidental damage Accommodates up to 915mm saw bar length Bucket Tool Rack Part No: 05-9 Series Part No Mounting 05-909-1 Inside Bucket 4.5 05-910-1 Outside Bucket 5.0 Designed for hanging hand tools, crimpers & hoists Provides safe and convenient storage on bucket, eliminates trip hazards Adjustable bracket Part No Suits Bucket 05-992 510 (L) x 200 (W) x 150 (D) With liner 3.6 05-993 510 (L) x 200 (W) x 150 (D) Without liner 3.6 M15 Quality Electrical Equipment for Generation, Transmission & Distribution
BUCKET & BOOM ACCESSORIES Tool & Equipment Holders Part No: Various Range of tool and equipment holders for buckets All high grade field tested UV stabilised material Part No Picture Description Dimensions (mm) Suit Bucket Lip (mm) Main Material Weight (kg) PTI-219028 Battery Tool Holder 450H x 230L x 90W 60Wx170H PE 1.4 PTI-219029 Mini Battery Tool or Hand Crimper/Cutter Holder 530L x 115W 60Wx170H PE 2.5 PTI-CHH-22 Mini Battery Tool or Hand Crimper/Cutter Holder, with Open Ended Side Tube 195W x 95B x 540H (Tube 50mmID x 400L) 60Wx170H PE 3.3 PTI-IWH5 Impact Wrench/Drill Holder for Bucket, Yellow with Lockstrap Takes Drill with 610mm Bit 60Wx170H PE 1.6 PTI-BSH4 Pole Saw Holder for Boom Mount with Ratchet Strap Fittings 740L x 165W N/A PE 2.4 PTI- 319024/16 Outside Tool Tray, Grey with Magnetic Tool Strip 605L x 110W x 130H @ Bottom, 270H @ Top 60Wx170H PE 4.2 PTI-319119-C Tool Tray for Bucket, Grey Semi Oval with Slide Lid, Internal Tool Loops and Lockstrap. Supplied with 2 Bucket Hooks 385W x 220L x 300H 76W PE 3.8 ATP-BMRB Rope Box, Completely Non-Conductive with Lip & Elastic Straplock (Rope & Karabiner sold separately) Custom Made Custom Made Nylon 3.1 www.tengroup.com.au 1300 ASK TEN M16
Bucket Matting & Covers Part No: PTI Series Part No Picture Description Features Options PTI-TG-* Bucket matting - Tru Grit Non Slip Over 17 standard sizes PTI-FMTG-* Bucket matting Fibreglass Moulded Base and Tru Grit Non-Slip Fibreglass base protects liner base Built in step PTI-SGS-* PTI-SGAF-* Bucket matting Safety Grating Solid Black gripping surface Bucket matting Safety Grating Air Filled Flexible cushioning surface, standard black Hygienically designed to allow drainage of fluid and passage of debris. Will not rot, flake or splinter. Bonded grid pattern. Available 610mm wide x 12m long lengths (min 305mm length). Colour, sizes Colour, sizes PTI-*-F Bucket matting Foam Ergonomic cushioning, non-slip, non conductive Sizes PTI-* Tru-Fit tough, rigid, polyethylene cover and webbing Mildew resistant webbing. Easy to install and remove. Range of models available. Strap buckle or snap cord closure PTI-* Fit-All heavy duty vinyl coated nylon on both sides with elastic sewn into hem. 1.2m lanyard with brass swivel. 50mm foam sewn into cover. Layered to resist wind whip. Foam creates dome effect to stop water pooling. Reinforcing dowel available on some covers. Standard colour is Black, others available: White, Safety Yellow & Safety Orange. BELTS & POUCHES Leather Tool Pouches Part No: 51 Leather Series Durable with reinforced rivets Slotted or tunnel loop belt connection, with speciality snap add-ons 5126 5167 5178 Part No Belt Connection Belt Width Overall Size (mm) Pockets 5126 Slotted 51 150 x 220 5 0.34 5167 Slotted 70 255 x 265 11 0.65 5178 Tunnel Loop 64 280 x 255 8 0.47 M17 Quality Electrical Equipment for Generation, Transmission & Distribution
Canvas Bull Pin Bag Part No: 54 Series Double base Part No Belt Capacity Leather Bull Pin Holder Part No: 54 Leather Series Belt Connection Durable with reinforced rivets 5416 Up to 75mm Loops 130 (L) x 230 (W) x 250 (D) 0.4 Part No Belt Connection Belt Width Overall Size (mm) Weight 5417T Tunnel Up to 89mm 80 x 310 0.15kg Also Available from Klein - Tool Belts and Pouches 5415L 5207L 5458 5456T 5137 Large Heavy Duty Embossed Tool Belt Large Electricians Tool Belt Snap Loop Tool/Hammer Holder Closable Pouch 5107-9 5118C 5186 5126 5168T Plier Holders, Open Bottom Pliers, Rule, Screwdriver & Wrench Holder Pocket Knife Holder Tool Pouch 5 Pocket Tool Pouch 6 Pocket What makes a TEN bucket bag the toughest? Quality Australian Made Canvas and PVC Products for the Utility, Rail and Mining Sectors Double stitched seams Heavy duty hardware Durable tear stop canvas Seat belt webbing straps www.tengroup.com.au 1300 ASK TEN M18
Powerline Series Tool Pouches Multi pocket electricians style Double layered Dupont Cordura Nylon. Exceptional resistance to abrasion, punctures, and tearing Double nylon-stitched and rivet reinforced for extra durability Large pockets and reinforced base for extra carrying capacity, as well as durability Heavy-duty, nylon webbing Lightweight and comfortable Washable 5718 5719 Part No Overall Size (mm) Pockets 5718 280 x 305 8 0.4 5719 280 x 305 19 0.4 Other Powerline Series Equipment 5235 5709L 5705 5712 Knife Holder Large 4 Piece Combo Belt Set Web Work Belt Tape Measure Pouch STRAPS Webbing Strap Cam-Lock Tie Down Part No: M04WSBYTEN-W5125 Multi-purpose cam lock tie down Ideal for securing ladder to vehicle ladder rack 25 (Webbing) x 1250 (L) 0.2 Battery Tool Shoulder Strap Part No: M11WSBYTEN-WSKL Stainless steel clip Weight (KG) 0.3 M19 Quality Electrical Equipment for Generation, Transmission & Distribution
HARD STORAGE CASES Die Box Part No: DIE-BOX Heavy duty steel Powder coated 20 compartments ideal for dies plus 1 large compartment Dual clasps and carry handle 365 L x 365 W x 78 H 5.1 Ground Tarp & Soil Mat - PVC Part No: M13GTRTEN & M13SMRTEN Series M13GTRTEN series Ground Tarps designed for covering the ground around the power pole base M13SMRTEN series Soil Mats designed for piling dirt on to keep walkways and underground work areas clean and tidy PVC with reinforced edging Custom designs, shapes and sizes available upon request Stick Case Aluminium Part No: CASE-STK Quality heavy duty aluminium transport case Designed for safe transport and storage of stick kits Butterfly lock clips and three carry handles Document holder in lid Custom made designs available upon request 1450 (L) x 440 (W) x 140 (H) 10.0 Detector Case Aluminium Part No: CASE-DET Quality heavy duty aluminium transport case Designed for safe transport and storage of voltage detectors Butterfly lock clips and three carry handles Document holder in lid Custom made designs available upon request 54mm (L) x 440mm (W) x 350mm (H) 11 Labels and contents of kits shown not included - Contact TEN to develop a customised kit Refer page M8-M9 for PVC Stick Bags www.tengroup.com.au 1300 ASK TEN M20