Visit rimpsource at www.parker.com/crimpsource, your online resource for hose crimp specifications.
atalog 4400 US Visual Index Karrykrimp -8 Karrykrimp ench Mount -8 Karrykrimp 2-10 Karrykrimp 2 ench Mount -10 Parkrimp 2-12 Minikrimp -14 Portable Pumps -16 rimpsource -17 Parkrimp and Twin-Tough Instructions -18-21 onversion Kits -22 332T-115V -23 239 and 339-23 Hose ut-off Machine Hose ut-off Machine -2 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Visual Index 631075-23 Hose ut-off Machine -23 TH6-10-HL-9-2 -24 Karrykut - Hose ut-off Machine TH3-51 Ultra lean Hose leaning Kit TH6-10-L-7-24 871522-26 881540-26 conomy Hose leaning Kit Handycut - Hose ut-off Machine Push-Lok ut-off & ssembly Tool TH9-1 -26 316-26 TH11-1 -27 Hose Insertion epth locks Hose ut-off Tool Hose ut-off Tool 432-115V -27 80-0R and 83-0R -27 80-SR -27 Hozembler Storage Racks Swivel Rack TH2-7 -28 652200-28 2727 and 2726-28 Fittings Push-On Stand Mandrel Tool Kit - 22 Mandrel Tool Kit - 23 TH2-7M25-6, TH2-7M25-8 -28 652201-29 601069-29 Mandrels - 25 ssembly Tools - 22 Hose Perforator -3 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Visual Index Hose Oil -29 Lubricant -29 Small rimper Hood -29 Hose Oil ccrolube - High fficiency Large rimper Hood -29-4 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Notes -5 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Parkrimp System Hose ssemblies re asy With the Parkrimp System. Since its introduction in 1980, the Parkrimp family of crimping machines has led the industry in ease of use and rugged durability. When it comes to hose assemblies, no one puts it all together like Parker. From highvolume productivity to portable on-site assembly, we offer a variety of crimping machines, No-Skive hoses, and No-Skive fittings to meet your needs. With Parkrimp equipment, anyone can make factoryquality hose assemblies quickly, easily, and cost effectively. Parkrimp machines are simple to operate and they re built to provide years of dependable service. Seven Parkrimp models an entire family of crimpers are available to meet your benchmounted or portable needs, crimping straight or bent-stem fittings from 1/4" to 2" in diameter. Just use our No-Skive hoses and fittings to create leak-free hose assemblies whenever and wherever you need them. The complete system from one source: No-Skive hose, No-Skive fittings, and crimping machines with worldwide availability and service. ight segment crimp dies provide a smooth, even, 360-degree crimp. ottom-loading operation makes it easy to handle long hose assemblies. With Parkrimp, you benefit from a full length crimp. Our low profile design makes routing hose assemblies easy. Parker s exclusive Parkalign feature positions the fitting in the dies perfectly every time. No-Skive hoses and fittings combine with the Parkrimp system to create high quality, reliable hydraulic hose assemblies every time. Our linked crimp dies keep die segments together. No loose parts to mismatch or misplace. s are color-coded by size for easy identification and reduced set-up time. e sure to check www.parker.com/crimpsource for the most up to date information and crimp specifications. -6 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Parkrimp System Selecting the right die. Once the proper Parker Hose and Fitting is selected that meets your application requirements, you will need to select the proper die to assemble them together. ased on the hose size and approved fitting, select the proper color coded die, as called out in the chart below. xample: Hose 451T-4 Fitting 43 ody olor Silver avity olor (-4) R ased on the Parkrimp machine being used to assemble the hose and fitting, individual die part numbers and tooling selection for your assembly can be found in Section of this catalog. For general hose assembly instructions for all Parkrimp machines, please turn to pages -18 and -19. (n instructional video is a standard part of each Parkrimp machine shipped from the manufacturer.) Parker Hose Products ivision also offers a full line of crimping accessories, including conversion kits, cabinets, cut-off saws, push-on tables, die racks, and mandrel tool kits. Hose ash Size avity olor ode 43 ody olor 70, 71 & 77 ody olor 73, 78, S6 & 79 ody olor 76 ody olor 26 ody olor 81 ody olor Hose ash Size avity olor ode HY ody olor Silver lack Olive rab Silver Silver Silver Silver -4 R N/ N/ N/ N/ -4 ROWN -5 PURPL N/ N/ N/ N/ -5 ROWN -6 YLLOW N/ N/ N/ -6 ROWN -8 LU N/ N/ N/ -8 ROWN -10 ORNG N/ N/ N/ -10 ROWN -12 GRN -12 ROWN -16 LK -16 ROWN -20 WHIT N/ -24 R N/ -32 GRN N/ Reference pages -8 through -17 for specific tool information regarding hose, fitting, and crimper combinations. -7 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Karrykrimp Karrykrimp and Karrykrimp ench Mount Karrykrimp ench Mount The Karrykrimp is now available in a modular design with all the familiar Parkrimp System advantages. The same unit now offers portability and bench mountability. apability Up to 1-1/4 I 2 wire braided hose Up to 5/8 I 4 wire spiral hose Only steel fittings Portable, compact rugged design Numerous portable power unit options available Pivoting pusher design for easy die change out Increased height enables longer bent tube fittings to be crimped For use with 25, 26, 43, 81, and HY fittings imensions: 15 wide, 12 deep, 30 high Weight: 60 lbs (without power unit) Rating: 30 ton force @ 10,000 psi maximum Full ycle Time: 30 seconds 82-0P power unit (1/2 43 ) Reference page -16 for information on available power units Standard Part Number Individual 82-H 82-061L 82-KK escription Part Number Ä Ä Ä rimp Head 82-H Ä ench Power Unit ssembly 85-1PH Ä Ä Ä Silver die ring 82-R01 Ä Ä Ä lack die ring 82-R02 Ä Hose ssembly 85-00L Ä Stand ssembly 85-ST apability Up to 1-1/4 I 2 wire braided hose Up to 5/8 I 4 wire spiral hose Only steel fittings Faster cycle times on bench mounted units Pivoting pusher design for easy die change out ompact bench mount design Increased height enables longer bent tube fittings to be crimped For use with 25, 26, 43, 81, and HY fittings imensions: 17 wide, 23 deep, 27-1/2 high Weight: 146 lbs Rating: 30 ton force @ 10,000 psi maximum Full ycle Time: 11 seconds (1/2 43 ) Hydraulic Fluid: W32 oil This unit is designed to make about 400 crimps per day and is not designed to be a production crimper. xceeding these suggested production amounts will significantly reduce the the expectancy of the crimper components. Note: Motor is dual voltage, 50/60hz suitable for 208-230/115v, 1ph, 60hz and 220-230/110v, 1ph, 50hz. Motor can be rewired by a qualified electrician to operate at alternate voltage. Note: For crimp instructions, see pages -18 and -19. Hose assemblies must be inspected for cleanliness and free of all foreign particles. Parker Hannifin will not accept responsibility for the operation of, or provide warranty coverage for, a crimper that is operated by a power unit other than equipment supplied by Parker Hannifin for the express purpose of operating the crimper. -8 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Karrykrimp and Karrykrimp ench Mount rimp Information Karrykrimp/ Karrykrimp ench Mount Hose Selection hart PN: KK HOS L Hose 8/11 351T 351ST 422 424 431 436 451T 451ST 471ST 472T 482T 482ST 426 471T 421W 302/301 301LT 304 341 381 601 604 881 722T (-6, -8, -10 only) Fittings 43 Hose/ Selection and rimp iameters PN: KK MSTR L 8/11 4 5 6 8 10 12 16 20 R PUR YL LU ORG GRN LK WHT 80-04 80-05 80-06 80-08 80-10 80-12 80-16 80-20 0.645 0.665 0.685 0.705 0.710 0.730 0.750 0.770 0.825 0.845 0.865 0.885 0.945 0.965 0.985 1.005 1.060 1.080 1.100 1.120 1.245 1.265 1.285 1.305 1.590 1.610 1.630 1.650 Ring 1.970 1.990 Silver 2.010 2.030 lack (place hose decal here) 213 285 293 201 206 221FR 225 244 266 SS25UL 811 811HT 881 26 81 80-04 80-05 80-06 80-08 80-10 80-12 80-16 0.460 0.480 0.500 0.520 0.520 0.540 0.560 0.580 0.575 0.595 0.615 0.635 0.670 0.690 0.710 0.730 0.805 0.825 0.845 0.865 0.915 0.935 0.955 0.975 1.175 1.195 Silver 1.215 1.235 lack 80-V12 80-V16 80-V20 1.155 1.175 1.450 1.470 1.740 1.760 Silver 80-H585 80-H735 80-H840 80-H970 80-H1120 X 0.575 0.595 0.725 0.745 0.830 0.850 0.960 0.980 1.110 1.130 Silver XX HY 80-H605 80-H775 80-H885 80-H1010 80-H1170 0.635 0.655 0.805 0.825 0.915 0.935 1.040 1.060 80-H595 80-H735 80-H860 80-H1015 80-H1170 80-H1365 1.200 1.220 lack 611HT 801 836 0.575 0.595 0.720 0.740 0.860 0.880 0.995 1.015 1.140 1.160 1.350 1.370 Silver Parker Hannifin orp. Hose Products ivison 30240 Lakeland lvd. 44092 aution: Read the operations and technical manual before attempting to operate this machinery. o not operate this machine without guard in place. Keep hands clear of moving parts when operating machine. NOT: o not use these machines to assemble 341-20, 451T-20, 451ST- 20, 472T-20 or any size stainless steel fittings. For a new decal, contact Parker at: 1-800--PRKR or print your own at www.parker.com/crimpsource. -9 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Karrykrimp 2 Karrykrimp 2 and Karrykrimp 2 ench Mount Karrykrimp 2 ench Mount The Karrykrimp 2 is now available in a modular design with all the familiar Parkrimp System advantages. The same unit now offers portability and bench mountability. apability Up to 1-1/4 I 2 wire braided hose Up to 1-1/4 I 4 wire spiral hose Up to 1 I 6 wire spiral hose Portable, compact rugged design Numerous portable power unit options available Pivoting pusher design for easy die change out For use with 25,26, 43, 70, 71, 73, 77, 78, 81, and HY fittngs imensions: 14 wide, 14 deep, 31-1/2 high Weight: 120 lbs (without power unit) Rating: 60 ton force @ 10,000 psi maximum Full ycle Time: 20 seconds with 85-0P power unit (1/2 43 series) Reference page -16 for information on available power units Standard Part Number Individual 85-H 85-061L 85-KK escription Part Number Ä Ä Ä rimp Head 85-H Ä ench Power Unit ssembly 85-1PH Ä Ä Ä Silver die ring 85-R01 Ä Ä Ä lack die ring 85-R02 Ä Hose ssembly 85-00L Ä Stand ssembly 85-ST apability Up to 1-1/4 I 2 wire braided hose Up to 1-1/4 I 4 wire spiral hose Up to 1 I 6 wire spiral hose Faster cycle times on bench mounted units Pivoting pusher design for easy die change out ompact bench mount design For use with 25, 26, 43, 70, 71, 73, 77, 78, 81, and HY fittings imensions: 17 wide, 23 deep, 28 high Weight: 208 lbs Rating: 60 ton force @ 10,000 psi maximum Full ycle Time: 17 seconds (1/2 43 series) Hydraulic Fluid: W32 oil This unit is designed to make about 400 crimps per day and is not designed to be a production crimper. xceeding these suggested production amounts will significantly reduce the the expectancy of the crimper components. Note: Motor is dual voltage, 50/60hz suitable for 208-230/115v, 1ph, 60hz and 220-230/110v, 1ph, 50hz. Motor can be rewired by a qualified electrician to operate at alternate voltage. Optional Tooling Kit (85-K) Includes 43 dies in sizes 1/4, 3/8, 1/2, 3/4, 1 and 1-1/4 and 70/71 dies in sizes 3/8, 1/2, 3/4, 1, 1-1/4 ONLY. Note: For crimp instructions, see pages -18 and -19. Hose assemblies must be inspected for cleanliness and free of all foreign particles. Parker Hannifin will not accept responsibility for the operation of, or provide warranty coverage for, a crimper that is operated by a power unit other than equipment supplied by Parker Hannifin for the express purpose of operating the crimper. -10 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Karrykrimp 2 & Karrykrimp 2 ench Mount rimp Information KK2-PH Hose Selection hart PN: KK2-PH HOS L Hose 8/11 351T 351ST 422 424 426 421W 302/301 301LT 431 436 451T 451ST 471T 304 341 381 722T 471ST 472T 482T 482ST 601 604 881 Fittings 43 Hose/ Selection and rimp iameters PN: KK2-PH MSTR L 8/11 4 5 6 8 10 12 16 20 R PUR YL LU ORG GRN LK WHT 80-04 80-05 80-06 80-08 80-10 80-12 80-16 80-20 0.645 0.665 0.685 0.705 0.710 0.730 0.750 0.770 0.825 0.845 0.865 0.885 0.945 0.965 0.985 1.005 1.060 1.080 1.100 1.120 83-06 83-08 83-10 1.245 1.265 1.285 1.305 1.590 1.610 1.630 1.650 Ring 1.970 1.990 Silver 2.010 2.030 lack 701 F42 (-8 ONLY) 70 0.990 1.010 1.140 1.160 1.260 1.280 lack 711 721 721T 721ST 772T 772LT 772ST 774 71 83-06 83-08 83-10 83-12 83-16 83-20 0.950 0.970 1.100 1.120 1.220 1.240 1.355 1.375 1.695 1.715 2.025 2.045 Silver 731 (place hose decal here) 73 80-L12 1.420 1.440 80-S08 80-S10 80-S12 80-L16 1.730 1.750 Silver 787T 797T 77 0.930 0.950 1.057 1.077 1.245 1.265 lack 78 781 782T 782ST 78 80-L12 1.420 1.440 80-L16 1.730 1.750 Silver 213 285 293 201 206 221FR 225 244 266 SS25UL 811 811HT 881 26 81 80-04 80-05 80-06 80-08 80-10 80-12 80-16 0.460 0.480 0.500 0.520 0.520 0.540 0.560 0.580 0.575 0.595 0.615 0.635 0.670 0.690 0.710 0.730 0.805 0.825 0.845 0.865 0.915 0.935 0.955 0.975 1.175 1.195 Silver 1.215 1.235 lack 80-V12 80-V16 80-V20 1.155 1.175 1.450 1.470 1.740 1.760 Silver X 80-H585 80-H735 80-H840 80-H970 80-H1120 80-H1365 0.575 0.595 0.725 0.745 0.830 0.850 0.960 0.980 1.110 1.130 1.355 1.375 Silver XX 611HT 801 836 HY 80-H605 80-H775 80-H885 80-H1010 80-H1170 80-H1465 0.635 0.655 0.805 0.825 0.915 0.935 1.040 1.060 1.200 1.220 80-H595 80-H735 80-H860 80-H1015 80-H1170 80-H1365 0.575 0.595 0.720 0.740 0.860 0.880 0.995 1.015 1.140 1.160 1.495 1.515 lack 1.350 1.370 Silver Parker Hannifin orp. Hose Products ivison 30240 Lakeland lvd. 44092 aution: Read the operations and technical manual before attempting to operate this machinery. o not operate this machine without guard in place. Keep hands clear of moving parts when operating machine. NOT: 1. Stainless steel crimper diameters are 0.010 greater than table listings with the exception of stainless steel HY series fitting which are 0.005 greater than the table listings. 2. o not use lubricant to assemble spiral hose and fittings. For a new decal, contact Parker at: 1-800--PRKR or print your own at www.parker.com/crimpsource. -11 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Parkrimp 2 Parkrimp 2 apability Standard Up to 2 I 2 wire braided hose Up to 2 I 4/6 wire spiral hose asy to use vertical design rimps full range of Parker hoses from 1/4 through 2 I.. rimps both steel and stainless steel fittings For use with 25, 26, 43, 70, 71, 73, 76, 77, 78, 79, 81, S6 and HY fittings imensions: 31 wide, 24 deep, 77 high Weight: 842 lbs (Head is 558 lbs and base is 284 lbs) Rating: 125 ton force @ 5,000 psi maximum Full ycle Time: 30 seconds without adapter bowl 20 seconds with adapter bowl Hydraulic oil: nerpac oil Part Number Individual 83-001 83-081 83-002 83-082 escription Part Number Ä Ä Ä Ä Parkrimp 2 crimper head assembly 83-080 Ä Ä Parkrimp 2 stand assembly with 230/460 volt, 3 phase, 50/60 83-S40 Hz power unit (wired for 230 volt) Ä Ä Parkrimp 2 stand assemlby with 230 volt, 1 phase, 50/60 83-S20 Hz power unit Ä Ä Ä Ä dapter bowl 83-O Ä Ä Ä Ä Spacer ring 83-R02 Ä Ä Ä Ä Spacer Plate 83-R02H Ä Ä Kit Includes 43 dies in sizes 1/4, 3/8, 1/2, 3/4, 1, 1-1/4 dies and 70/71 dies in sizes 3/8, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 ONLY 83-K Note: For crimp instructions, see pages -18 and -19. Hose assemblies must be inspected for cleanliness and free of all foreign particles. Parker Hannifin will not accept responsibility for the operation of, or provide warranty coverage for, a crimper that is operated by a power unit other than equipment supplied by Parker Hannifin for the express purpose of operating the crimper. -12 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Parkrimp 2 rimp Information Parkrimp 2 Hose Selection hart PN: PK2 HOS L 8/11 Hose 351T 351ST 422 424 426 421W 302/301 301LT 431 436 451T 451ST 471T Tools Required 304 341 381 722T (-6 thru -20 only) Tools Required 701 F42 (-8 ONLY) Tools Required 711 721ST 722T 721 (-24,-32 only) 721T 772LT Tools Required 731 Tools Required 761 Tools Required (place hose decal 787T here) 797T Tools Required 471ST 472T 482T 482ST 601 604 881 772ST 772T 774 P35/78 781 782T 782ST Tools Required 791T 792LT 792T F42 Tools Required 792ST 213 285 293 201 206 Tools Required 221FR 225 244 Tools Required 266 SS25UL 811 811HT 881 Tools Required X Tools Required XX Tools Required 611HT 801 836 Tools Required Fittings 43 70 71 73 76 77 78/S6 79 26 81 HY Selection and rimp iameters PN: PK2 MSTR L 8/11 4 R 5 PUR 6 YL 8 LU 10 ORG 12 GRN 16 LK 20 WHT 24 R 32 GRN 80-04 80-05 80-06 80-08 80-10 80-12 80-16 80-20 83-24 83-32 83-16H 83-20H 0.645 0.665 0.685 0.705 0.710 0.730 0.750 0.770 0.825 0.845 0.865 0.885 0.945 0.965 0.985 1.005 1.060 1.080 1.100 1.120 1.245 1.265 1.285 1.305 1.590 1.610 1.630 1.650 1.970 1.990 2.010 2.030 83-06 83-08 83-10 0.990 1.140 1.260 1.010 1.160 1.280 Spacer Ring (83-R02), Small lack (83-XX), and dapter owl (83-O) 2.290 2.310 2.330 2.350 2.735 2.755 2.775 2.795 83-06 83-08 83-10 83-12 83-16 83-20 83-24 83-32 83-16H 83-20H 0.950 0.970 1.100 1.120 1.220 1.240 1.355 1.375 1.695 1.715 2.025 2.045 2.290 2.310 2.775 2.795 83-L12 83-L16 83-L20 83-L24 83-L32 1.420 1.730 2.140 2.440 3.025 1.440 1.750 2.160 2.460 3.045 Large Olive rab (83-LXX) 83-U12 83-U16 1.540 1.865 1.560 1.885 Large Silver (83-UXX) 80-S08 80-S10 80-S12 83-S16 83-S20 0.930 0.950 *S6 Fittings to be used on P35-32 Only 1.057 1.077 1.245 1.265 1.541 1.561 1.970 1.990 83-L12 83-L16 83-L20 83-L24 83-L32 1.420 1.730 2.140 2.440 3.025 1.440 1.750 2.160 2.460 3.045 Large Olive rab (83-LXX) 83-L12 83-L16 83-L20 83-L24 1.420 1.730 2.140 2.440 1.440 1.750 2.160 2.460 Large Olive rab (83-LXX) 80-04 80-05 80-06 80-08 80-10 80-12 80-16 83-20 83-24 83-32 0.460 0.520 0.575 0.670 0.805 0.915 1.175 1.420 1.670 2.160 0.480 0.540 0.595 0.690 0.825 0.935 1.195 1.440 1.690 2.180 Small Silver (80-XX) and dapter owl (83-O) Large Silver (83-XX) 0.500 0.520 0.560 0.580 Small Silver (80-XX) and dapter owl (83-O) Spacer Ring (83-R02), Small Silver (80-XX), and dapter owl (83-O) 0.615 0.635 Small lack (83-XX) and dapter owl (83-O) Spacer Ring (83-R02), Small Silver (80-SXX) and dapter owl (83-O) 0.710 0.730 0.845 0.865 Spacer Ring (83-R02), Small Silver (80-XX), and dapter owl (83-O) 80-H585 80-H735 80-H840 80-H970 80-H1120 80-H1365 0.575 0.725 0.830 0.960 1.110 1.355 0.595 0.745 0.850 0.980 1.130 1.375 Small Silver (80-HXXX or 80-HXXXX) and dapter owl (83-O) 80-H605 80-H775 80-H885 80-H1010 80-H1170 80-H1465 0.635 0.655 0.805 0.825 0.915 0.935 1.040 1.060 1.200 1.220 1.495 1.515 Spacer Ring (83-R02), Small Silver (80-HXXX or 80-HXXXX), and dapter owl (83-O) 80-H595 80-H735 80-H860 80-H1015 80-H1170 80-H1365 0.575 0.595 0.720 0.740 0.860 0.880 0.995 1.015 1.140 1.160 1.350 1.370 Small Silver (80-HXXX or 80-HXXXX) and dapter owl (83-O) Large Silver (83-XX) Spacer Plate (83-R02H) and Large Silver (83-XX) Large lack (83-XX) Spacer Plate (83-R02H) and Large Silver (83-SXX) 0.955 0.975 1.215 1.235 1.460 1.480 1.710 1.730 2.200 2.220 Spacer Plate (83-R02H) and Large Silver (83-XX) 80-V12 80-V16 80-V20 83-V24 83-V32 1.155 1.450 1.740 2.010 2.430 1.175 1.470 1.760 2.030 2.450 Small Silver (80-VXX) and Large Silver dapter owl (83-O) (83-VXX) Parker Hannifin orp. Hose Products ivison 30240 Lakeland lvd. 44092 aution: Read the operations and technical manual before attempting to operate this machinery. o not operate this machine without guard in place. Keep hands clear of moving parts when operating machine. For a new decal, contact Parker at: 1-800--PRKR or print your own at www.parker.com/crimpsource. NOT: 1. The 83-R12 split die ring is used for all crimping operations. 2. Stainless steel crimper diameters are 0.010 greater than table listings with the exception of stainless steel HY series fitting which are 0.005 greater than the table listings. 3. o not use lubricant to assemble spiral hose and fittings. -13 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Minikrimp Minikrimp apability Up to 1 I 2 wire braided hose Only steel fittings Light weight, portable, compact all-in-one unit Handpump or air over hydraulic design Removable pusher design for easy die change out Reference page -16 for information on available power units For use with 25, 26, 43, 81, and HY fittings o not crimp stainless steel fittings imensions: 6 wide, 13 deep, 15 high Weight: 42 lbs (with hand pump) Rating: 30 ton force @ 10,000 psi maximum Full ycle Time: 30 seconds Important The Minikrimp was developed by Parker Hannifin Parflex ivision but is compatible with Parker Hannifin Hose Products ivision products. Refer to rimpsource on www.parker.com/ crimpsource (the online resource for hose crimp specifications for the complete line of Parker crimping machines). ny engineering and crimper performance issues pertaining to the Minikrimp should be directed to the Parflex ivision, Technical Services epartment, at (330) 296-2871 or fax, at (330) 296-8433. Standard Part Number Individual Part 94-001-PF 94-002 -PF escription Number Ä Ä ase unit 94-080-PF Ä Hand pump 015301 ir over hydraulic Ä pump kit with 025411 tubing and adapters Ä Ä Silver die ring 82-R01-PF Optional Tooling Side Vise Mount (015736) Upright Table Mount (015306) Upright Vise Mount (015307) lack Ring (82-R02-PF) onnection Hose with Quick oupling (015309) ent Tube for Hand Pump Only (015308) ent Tube for ir Over Hydraulic Pump Only (025349) Note: For crimp instructions, see pages -18 and -19. Hose assemblies must be inspected for cleanliness and free of all foreign particles. Parker Hannifin will not accept responsibility for the operation of, or provide warranty coverage for, a crimper that is operated by a power unit other than equipment supplied by Parker Hannifin for the express purpose of operating the crimper. -14 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Minikrimp rimp Information Minikrimp Hose Selection hart Minikrimp Hose Selection hart Hose 351T 351ST 422 424 431 436 451T 451ST 471ST 472T 482T 482ST 426 471T 421W 302/301 301LT 304 341 381 601 604 881 722T (-6, -8, -10 only) Fittings 43 Hose/ Selection and rimp iameters 4/11 4 5 6 8 10 12 16 R PUR YL LU ORG GRN LK 80-04 80-05 80-06 80-08 80-10 80-12 80-16 0.645 0.665 0.685 0.705 0.710 0.730 0.750 0.770 0.825 0.845 0.865 0.885 0.945 0.965 0.985 1.005 1.060 1.080 1.100 1.120 1.245 1.265 1.285 1.305 Ring 1.590 1.610 Silver 1.630 1.650 lack (place hose decal here) 213 285 293 201 206 225 244 266 221FR SS25UL 26 80-04 80-05 80-06 80-08 80-10 80-12 80-16 0.460 0.480 0.500 0.520 0.520 0.540 0.560 0.580 0.575 0.595 0.615 0.635 0.670 0.690 0.710 0.730 0.805 0.825 0.845 0.865 0.915 0.935 0.955 0.975 80-V12 1.175 1.195 Silver 1.215 1.235 lack 80-V16 811 811HT 881 81 1.155 1.175 1.450 1.470 Silver X XX 611HT 801 836 Parker Hannifin orp. Hose Products ivison 30240 Lakeland lvd. 44092 HY 80-H585 80-H735 80-H840 80-H970 80-H1120 0.595 0.575 0.745 0.725 0.850 0.830 0.980 0.960 80-H605 80-H775 80-H885 80-H1010 80-H1170 0.655 0.635 0.825 0.805 0.935 0.915 1.060 1.040 1.130 1.110 Silver 1.220 1.200 lack 80-H595 80-H735 80-H860 80-H1015 80-H1170 80-H1365 0.575 0.595 0.720 0.740 aution: Read the operations and technical manual before attempting to operate this machinery. Keep hands clear of moving parts when operating machine. For a new decal, print your own at www.parker.com/crimpsource. 0.860 0.880 0.995 1.015 1.140 1.160 1.350 1.370 Silver NOT: o not use this machine to assemble stainless steel fittings with any hose listed on this chart -15 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Portable Pumps Hand Pump Part No. 82-0HP Hand Pump Part No. 85-0HP (for use with the Minikrimp, Karrykrimp and Karrykrimp 2) ase of operation hand pump delivers 10,000 psi Length: 23 Width: 4 Height: 5 Port Size: 3/8 NPTF Weight: 9 lbs Hydraulic Fluid: nerpac oil lectric Pump Part No. 82-0P (for use with the Minikrimp, Karrykrimp and Karrykrimp 2) ase of operation electric pump delivers 10,000 psi Length: 13 Width: 13 Height: 15 Port Size: 3/8 NPTF Weight: 31 lbs Hydraulic Fluid: nerpac oil 115 volt, 1 phase, 50/60 Hz, 9 amp ir/hydraulic Pump Part No. 82-0P (for use with the Minikrimp, Karrykrimp and Karrykrimp 2) ase of operation hand pump delivers 10,000 psi Length: 29 Width: 13 Height: 11 Port Size: 3/8 NPTF Weight: 61 lbs Hydraulic Fluid: nerpac oil lectric Pump Part No. 85-0P (for use with the Minikrimp, Karrykrimp and Karrykrimp 2) Heavy duty electric pump delivers 10,000 psi at a faster cycle time Length: 19 Width: 11 Height: 17 Port Size: 3/8 NPTF Weight: 59 lbs Hydraulic Fluid: nerpac oil 115 volt, 1 phase, 50/60 Hz, 20 amp Vehicle attery- Powered Pump Part No. 85-12V (for use with the Minikrimp, Karrykrimp and Karrykrimp 2) Lightweight pump operates with 80-110 psi shop air pressure and delivers 10,000 psi Length: 15 Width: 6 Height: 6 Intake Port Size: 1/4 NPTF Output Port Size: 3/8 NPTF Weight: 14 lbs Hydraulic Fluid: nerpac oil (for use with the Minikrimp, Karrykrimp and Karrykrimp 2) Ideal unit for Parker Mobile Hose Preplacement Service, elivering 10,000 psi. Length: 12 Width: 8 Height: 19.5 Weight: 67 lbs Hydraulic Fluid: ISO-46 nerpac Warranty Statement nerpac products are warranted to be free of defects in materials and workmanship. ny product that does not conform to specification will be repaired or replaced at nerpac s expense, anywhere in the world; simple as that! This warranty does not cover ordinary wear and tear, abuse, misuse, alterations, or the use of improper fluids. etermination of the authenticity of a warranty claim will be made only by nerpac or its uthorized Service enters. -16 Hose Products ivision Parker Hannifin orporation
atalog 4400 US rimpsource www.parker.com/crimpsource rimpsource is the industry's most complete resource for crimper technical information. It contains all of the crimp specifications approved for Parker's rubber, industrial and thermoplastic hose: rimp specs PFs of technical manuals for easy downloading Parts lists Troubleshooting advice PFs of crimper decals for immediate printing rimpsource provides easy access to all the specifications necessary to correctly fabricate a factory quality hose assembly. rimpsource Spec Page series of dropdown menus enables users to find what they need quickly and easily. hoose your crimper, and then select the hose, fittings and current specifications needed to make hose assemblies. You can also print a simple-to-follow data specification sheet or crimper decal. Print your own crimp decals whenever you need to rimpsource Home Page -17 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Parkrimp ssembly Instructions rimping using Minikrimp, Karrykrimp, Karrykrimp ench Mount, Karrykrimp 2 and Karrykrimp 2 ench Mount Parkrimp Fittings 25, 26, 43, 70, 71, 73, 76, 78, S6, 81, HY 1 Mark insertion depth and push on fitting 2 Insert unitized die train Mark the hose insertion depth and push hose into fitting until the mark on the hose is even with the end of the shell. Lubricate hose if necessary, however, O NOT lubricate if using spiral hose. See Hose Insertion epth table below. For 81 Shells with 88 Fittings Place shell onto end of hose and make sure the end of the shell lines up with the Insertion epth mark. Push hose onto the 88 fitting until the shell bottoms against the fitting s stop ring or hex. Lubricate hose if necessary. olor-oded Unitized -Train Pull pin at the top of pusher to swing it back. Place unitized die-train into base plate. See decal on crimper for proper die set. Note: Parkrimp 1 does not have a pin at the top of the pusher. Important: Lubricate the crimper s die bowl using a premium quality lithiumbase grease. 3 Position the fitting 4 Place die ring and crimp Parkrimp 26 81 Position the hose and fitting in dies from below. Rest bottom of coupling on die step using the PRKLIGN feature. 5 Measure crimp diameter Standard Parkrimp rimp iameter 26 Measure crimp diameter on the flat surfaces of the crimped shell, referenced in the illustration to the left. Reference decal on crimper for crimp diameters. Never use hose assemblies with incorrect crimp diameters. Important: Hose assemblies must be inspected for cleanliness and free of all foreign particles. Place correct die ring on top of the dies. See decal on crimper for proper die ring. Position pusher by replacing the pin and operate pump until the die ring bottoms out. Release pressure within the pump remove finished assembly. Note: Minikrimp, Karrykrimp & Karrykrimp 2 have several types of power sources, all of which are separate units from the crimping machine. Hose insertion depths Fitting Fitting Size 25 26 43 70 71 73 77 78 S6 79 81 HY inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm -4 13/16 21 13/16 21 1-7/16 37-5 13/16 21 15/16 24-6 7/8 22 13/16 21 1-1/8 29 1-1/16 27 1-1/16 27 1-1/2 40-8 7/8 22 13/16 21 1-5/16 33 1-5/16 33 1-1/4 32 1.36 34.6 1-9/16 40-10 7/8 22 1-9/16 40 1-3/8 35 1-5/16 33 1.53 38.9 1-7/8 47 1-9/16 40-12 7/8 22 1-1/2 38 1-1/2 38 1-7/16 37 1-7/8 48 1.78 45.2 1-7/8 48 2-3/16 56 1-1/8 29 1-5/8 40-16 1 25 1-3/4 44 1-13/16 46 1-3/4 44 2 51 2.13 54.1 2 51 2-5/16 59 1-1/4 32 1-3/4 43-20 1 25 1-7/8 48 1-3/4 44 1-13/16 46 2-1/2 64 2.51 63.8 2-1/2 64 2-13/16 71 1-5/16 33-24 1-1/16 27 1-7/16 37 2-5/16 59 2-7/16 62 2-7/16 62 1-5/16 33-32 1-1/4 32 1-13/16 46 2-7/16 62 2-13/16 71 3-1/2 88 1-11/16 43 For specific information on crimping, visit rimpsource TM online at www.parker.com/crimpsource. -18 Hose Products ivision Parker Hannifin orporation
atalog 4400 US rimping using Superkrimp and Parkrimp 2 Parkrimp Fittings 25, 26, 43, 70, 71, 73, 76, 78, S6, 81, HY 1 2b Mark insertion depth and push on fitting Mark the hose insertion depth and push hose into fitting until the mark on the hose is even with the end of the shell. Lubricate hose if necessary, however, O NOT lubricate if using spiral hose. See Hose Insertion epth table on previous page. If using small unitized dies For 81 Shells with 88 Fittings Place 81 Shell onto end of hose and make sure the end of the shell lines up with the Insertion epth mark. Push hose onto the 88 fitting until the shell bottoms against the fitting s stop ring or hex. Lubricate hose if necessary. 2a Parkrimp ssembly Instructions If using large two-piece dies Insert the proper die set into the die bowl. (The die sets are in two halves of four dies each. Place one half in the back and one half in the front to accommodate bent tube fittings.) Reference decal on crimper for proper tool selection. 3 Place spacer ring Slide Pin 4 With the pusher in the full up position, lift the back half of the split die ring. Lock it in the up position by pushing the slide pin in. (The slide pin is located inside the pusher at the back.) Position the split die ring Lubricate die bowl using a premium quality lithiumbase grease. arefully insert the adapter bowl, 83-O, into the base bowl. The adapter bowl must be tilted toward the back of the crimper during insertion. olor-oded Unitized -Train Lubricate die bowl using a premium quality lithium-base grease. Place unitized dietrain into the adapter bowl. Select die and die ring by hose size and type. See decal on crimper for proper die set. Note: sets have color-coded cavities indicating size and have the fitting series and dash size stamped on the top. 5 Position the fitting If required, place spacer ring on locating step of adapter bowl. Reference decal on crimper for tool selection. Parkrimp 26 81 Slide Pin 6 Lower the back half of the split die ring onto the dies by pulling the slide pin forward. rimp hose Insert the front half of the split die ring aligning the pins in the back half with the hole in the front half. Turn on the pump by pressing the ON switch. Pull the valve handle forward to bring the pusher down for crimping. When the split die ring contacts the base plate, the crimp is complete. Push the valve handle back to lift the pusher, open the dies, and release the finished assembly. Note: You do not have to remove any tooling to insert or remove straight fittings. The front half of the split die ring and the front die train must be removed to insert and remove bent tube fittings. Position the hose and fitting in dies from below. Rest bottom of coupling on die step using the PRKLIGN feature. 7 Measure crimp diameter Measure crimp diameter on the flat surfaces of the crimped shell, referenced in the illustration to the right. Reference decal on crimper for crimp diameters. Never use hose assemblies with incorrect crimp diameters. Standard Parkrimp rimp iameter 26 Important: Hose assemblies must be inspected for cleanliness and free of all foreign particles. -19 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Twin-Tough Instructions Set-up: Position the bonded rubber hose so that it lies flat on a work surface without tendency to twist or turn. Measure hose tear back length: Measure and mark the length that the hoses are to be separated. minimum of 12 inches is required for crimping the hose ends. 24 inch tear back is recommended for use with hydraulic tools..) Using a sharp blade, pierce the center of the valley (web) formed by the hoses..) To start the cut, place the blade in the center of that valley (web) drawing the knife with constant pressure. -20 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Twin-Tough Instructions Measure Separation: It is suggested that the separation length be at least 12 inches, so the crimping operation can be accomplished without risk of kinking the hoses. Stopping Separation: Parker recommends installing a heat shrink sleeve of at least 2 inches in length at the termination of the separated hose to provide protection against tearing of the valley (web) or hose covers. This heat shrink sleeve should be placed on the hose assembly prior to the crimping of the hose fittings. Once you have your heat shrink sleeve in place, use a heat gun to shrink the sleeve in place. rimping Fittings: ll of your crimping information can be found on rimpsource (www.parker.com/crimpsource). -21 Hose Products ivision Parker Hannifin orporation
atalog 4400 US onversion Kits Hydraulic Press Kit Part No. 8P-001 For use with 26, 43, 81 and HY Fitting ONLY Required Height from Press ase to Press Ram: 10 inches Required Width of owl iameter: 5 inches owl Rating: 30 tons force maximum Minimum Required Press apacity: Hose Size 1/4 to 1/2 needs a 20 ton press Hose size 5/8 to 1-1/4 needs a 30 ton press Standard Part Number Individual 8P-001 escription Part Number Ä owl ssembly 8P-030 Ä Pusher 8P-00P Ä Silver Ring 81-R01 Ä lack Ring 81-R02 Ä 43 dies in 1/4, 3/8, 1/2, 3/4 and 1 80-xx Weatherhead onversion Kit Part No. 8W-001 For use with 26, 43, 81 and HY Fitting ONLY onvert Weatherhead T-400 crimper to utilize Parker Parkrimp No-Skive fittings. Standard Part Number Individual 8W-001 escription Part Number Ä owl ssembly 8P-030 Ä Pusher 8W-00P Ä Silver Ring 81-R01 Ä lack Ring 81-R02 Ä 43 s in 1/4, 3/8, 1/2 and 3/4 80-xx Gates onversion Kit Part No. 8G-002 For use with 26, 43, 81 and HY Fitting ONLY onvert Gates 701, 703 and 707 bottom loading crimpers to utilize Parker Parkrimp No-Skive fittings. Standard Part Number Individual 8G-002 escription Part Number Ä owl ssembly 8P-030 Ä Silver Ring 81-R01 Ä lack Ring 81-R02 Ä 43 s in 1/4, 3/8, 1/2, 3/4 and 1 80-xx Notes: For additional information and operating instructions, visit the Parker Hose Products ivision website at. For crimping instructions, see pages -18 and -19. Hose assemblies must be inspected for cleanliness and free of all foreign particles. -22 Hose Products ivision Parker Hannifin orporation
atalog 4400 US ut-off Machines Hose ut-off Machine - Karrykut Part No. 631075 Hose ut-off Machine Part No. 332T-115V Portable saw for cutting on the job Unique clamp system spreads hose as it cuts to prevent blade binding uts multi-braided wire reinforced hose including 4 spiral construction up to 1-1/4 I.. imensions: 16 wide x 12 long x 19 high Shipping Weight: 58 lbs. Standard Part Number Individual 631075 escription Part Number Ä Power saw with 115volt (13 amp) universal motor 631140 Ä Universal clamp attachment (can be used with any portable power saw unit having a 5/8 arbor, 7 blade 631076 capacity Ä utting blade (7 with 5/8 arbor size) 621102 Hose ut-off Machine Part No. TH3-51 Standard 14 scalloped blade Front plate with useable pins easily holds in place for a straight cut lear face shield uts 1 & 2 wire brain through 2 I.., 4-wire spiral through 2 I.., and 6-wire spiral through 1 I.. 4.5 HP/115 volts 20 amp 1PH 50/60 cycle motor (a 20 amp dedicated circuit is recommended) imensions - 22-1/2 wide x 13 long x 25-1/2 high Shipping weight - 67 lbs. lade size - 14 x 0.125 x 1 Saw Part Number: TH3-51 Optional : Scalloped utting lade (TH3-50-1) Smooth evel utting lade (TH3-50-2) For quick, easy cutting of spiral reinforced hose up to 1-1/4 I.. Moving parts shielded by guards imensions: 13 wide x 26 long x 22 high Shipping Weight: 71 lbs. Standard Part Number Individual 332T-115V escription Part Number Ä Hose ut-off Machine with 1-1/2 HP, 3450 RPM, 115/230V single phase electic motor wired for 115V Ä Scallop utting lade (8 with 5/8 arbor size) 24398 Optional Smooth utting lade (580661) Hose ut-off Machine Part No. 239 and 339 esigned for heavy duty use uts multi-braided wire reinforced hose including 6 spiral construction up to 2 I.. imensions: 22 wide x 42 long x 24 high Shipping Weight: 115 lbs. Standard Part Number Individual 239 339 escription Part Number Ä Hose ut-off Machine with 230V single phase motor Ä Hose ut-off Machine with 3 HP motor 230V, 3 phase, 60 cycle Ä Ä Scallop utting lade (10 with 3/4 arbor size) 24248 Optional Smooth utting lade (15960) -23 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Ultra lean Hose leaning Kit Ultra lean Hose leaning Kit conomy Hose leaning Kit Part No. TH6-10-HL-9-2 Part No. TH6-10-L-7 apable of cleaning 1/4 through 2 hose, tube or pipe The launcher is supplied with a Full-Flow Quick Release oupling and unique 360 Rotary Plug for proper air flow and non-fatigue operator use Unique Safety Release ar that locks the faceplate into a closed position for firing Ultra lean projectiles ir Requirements: 80 PSI (5.5 ar) minimum to 110 PSI (7.5 ar) maximum 1/2 I.. air hose 5 micron filter and regulator with gauge are strongly suggested conomy Kit apable of cleaning 1/4 through 1-1/4 hose, tube or pipe Has a quarter-turn locking ring for easy nozzle change and projectile loading The launcher is constructed of durable brass and aluminum internals, strong plastic handle, and anodized aluminum firing head and locking ring. Ideal for mobile and job site applications because of its size and portability ir Requirements: 80 PSI (5.5 ar) minimum to 110 PSI (7.5 ar) maximum 1/2 I.. air hose 5 micron filter and regulator with gauge are strongly suggested Optional & ccessories: range of projectiles are available enabling the Ultra lean System to be used on different sizes and types of hose, as well as coupling configurations dditional nozzles for JI, ode 61 and ode 62 flanges, and ORFS are also available if required -24 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Ultra lean Hose leaning Kit Ultra lean Hose leaning Kit Sizing hart and Part Numbers HOS ONLY Projectile Hose Size Nozzle Part Number Part Number 3/16 TH6-10-H06 TH6-10-P06 1/4 TH6-10-H06 TH6-10-P10 3/8 TH6-10-H10 TH6-10-P14 1/2 TH6-10-H13 TH6-10-P18 5/8 TH6-10-H16 TH6-10-P22 3/4 TH6-10-H19 TH6-10-P26 1 TH6-10-H25 TH6-10-P33 1-1/4 TH6-10-H32 TH6-10-P40 1-1/2 TH6-10-H38 TH6-10-P50 2 TH6-10-H50 TH6-10-P60 HOS SSY W/FJI Projectile FJI Size Nozzle Part Number Part Number 1/4 TH6-10-J06 TH6-10-P06 3/8 TH6-10-J10 TH6-10-P12 1/2 TH6-10-J13 TH6-10-P16 5/8 TH6-10-J16 TH6-10-P22 3/4 TH6-10-J19 TH6-10-P26 1 TH6-10-J25 TH6-10-P33 1-1/4 TH6-10-J32 TH6-10-P40 1-1/2 TH6-10-J38 TH6-10-P50 2 TH6-10-J50 TH6-10-P60 HOS SSY W/FFORX Projectile FFORX Size Nozzle Part Number Part Number 1/4 TH6-10-4FFORX TH6-10-P06 3/8 TH6-10-H06 TH6-10-P12 1/2 TH6-10-H10 TH6-10-P16 5/8 TH6-10-H13 TH6-10-P22 3/4 TH6-10-H16 TH6-10-P26 1 TH6-10-H19 TH6-10-P33 1-1/4 TH6-10-H25 TH6-10-P40 HOS SSY W/ode 61 & 62 Flanges Projectile Flange Size Nozzle Part Number Part Number 1/2 TH6-10-H10 TH6-10-P16 3/4 TH6-10-H16 TH6-10-P26 1 TH6-10-H19 TH6-10-P33 1-1/4 TH6-10-H25 TH6-10-P40 1-1/2 TH6-10-H32 TH6-10-P50 2 TH6-10-H38 TH6-10-P60 PROJTIL QUNTITIS Parker Part Number escription Qty. TH6-10-P06 PROJTIL 3/16 100 PR G TH6-10-P10 PROJTIL 1/4 100 PR G TH6-10-P12 PROJTIL 1/4 N 5/16 100 PR G TH6-10-P14 PROJTIL 3/8 100 PR G TH6-10-P16 PROJTIL 3/8 100 PR G TH6-10-P18 PROJTIL 1/2 100 PR G TH6-10-P22 PROJTIL 5/8 50 PR G TH6-10-P26 PROJTIL 3/4 50 PR G TH6-10-P33 PROJTIL 1 40 PR G TH6-10-P40 PROJTIL 1-1/4 30 PR G TH6-10-P50 PROJTIL 1-1/2 20 PR G TH6-10-P60 PROJTIL 2 15 PR G -25 Hose Products ivision Parker Hannifin orporation
atalog 4400 US ccessories Hose ut-off Tool - Handykut Part No. 871522 Push-Lok ut-off & ssembly Tool Part No. 881540 Portable tool for efficient cutting of hose an be positioned onto a flat surface by clamps or by locking it in a vise, properly align the hose in a radius and cut it with a hacksaw ombined hose cutter and toggle action press that cuts and assembles Parker Push-Lok in sizes 1/4 through 3/4 I.. imensions: 6 wide x 18 long x 6 high Shipping Weight: 10 lbs. imensions: 16 long Shipping Weight: 4 lbs. Hose Insertion epth locks Part No. TH9-1-XXX Hose ut-off Tool Part No. 316 For quick easy marking of hose insertion depth nsures accuracy and increased productivity vailable locks Part Number escription TH9-1-26 26-4 through -10 TH9-1-26 26-12 through -32 TH9-1-43 43-4 through -10 TH9-1-43 43-12 through -32 TH9-1-70 70-6 through -20 TH9-1-71 71-6 through -32 TH9-1-73 73-12 through -32 TH9-1-77 77-8 through -16 TH9-1-78 78-12 through -32 TH9-1-79 79-12 through -24 TH9-1-HY HY -4 through -16 Small in size and easy to use Quick cutting of textile reinforced hose Ruggedly built for years of trouble-free service imensions: 15 long Shipping Weight: 6 lbs. -26 Hose Products ivision Parker Hannifin orporation
atalog 4400 US ccessories Hose ut-off Tool Part No. TH11-1 Hozembler Part No. 432-115V esigned for quick, easy cutting of textile reinforced hose. Squarely cuts Push-Lok hose in sizes 1/4 through 3/4 I.. imensions: 8 long Shipping Weight: 0.3 lbs. Power machine to facilitate the attachment of field attachable fittings Handles all hose and fittings up to 4 spiral wire, in sizes 3/16 through 2 I.., including bent tube elbows omes with vise, all adapters, foot switch and safety guard with 115V, 30 amp, universal motor Shipping Weight: 141 lbs. Optional Parts Mounting stand (662451) Storage Racks Part No. 80-0R and 83-0R Swivel Rack Part No. 80-SR-XXXX Modular die rack designed to hold small and large Parkrimp dies an be bolted together to a work bench horizontally or vertically Standard Part Number 80-0R 83-0R escription Ä Ä Storage of three sets of small dies Storage of two sets of large dies Holds up to 30 Parkrimp dies of any size Powder-coated, heavy-duty steel construction onsists of a base unit and up to five circular holders Floor or bench mounted Standard Part Number 80-SR-SM escription Swivel Rack and Small Holder 80-SR-LG 80-SR-S Swivel Rack and Large Holder Swivel Rack ase -27 Hose Products ivision Parker Hannifin orporation
atalog 4400 US ccessories Fitting Push-On Stand Part No. TH2-7 Mandrel Tool Kit - 22 Part No. 652200 Quickly and easily pushes fittings onto hose oosts productivity and quality liminates the need of rubber mallets and oils to get fittings onto the end of the hose for crimping Standard with straight tooling required for sizes 1/4 through 2 for all crimped fittings, 82 Push-Lok and 88 field attachable fittings Shipping Weight: 200 lbs. Optional Tooling lbow Pusher Set (TH2-7-LS) For assembly of Parker 22 field attachable fittings One of each part listed below is included in the kit Standard Hose I.. ash Size S (JI) 37 S 45 3/16-4 Ä Ä 1/4-5 Ä Ä 5/16-6 Ä Ä 13/32-8 Ä Ä 1/2-10 Ä Ä 5/8-12 Ä Ä Mandrel Tool Kit - 23 Part No. 2727 and 2726 Mandrels - 25 (For 271 Transportation Hose) Part No. TH2-7M25-6 and TH2-7M25-8 For assembly of Parker 23 field attachable fittings Part No. 2727 is for JI 37 flared fittings Part No. 2726 is for S 45 and PTT 30 flared fittings Standard Hose I.. ash Size 2727 2726 3/16-4 Ä Ä 1/4-5 Ä Ä 5/16-6 Ä Ä 13/32-8 Ä Ä 1/2-10 Ä Ä 5/8-12 Ä Ä 7/8-16 Ä Ä -28 Hose Products ivision Parker Hannifin orporation
atalog 4400 US ccessories ssembly Tools - 22 Part No. 652201 Hose Perforator Part No. 601069 For assembly of Parker 22 field attachable fittings One of each part listed below is included in the kit Standard Hose I.. ash Size S (JI) 37 S 45 7/8-16 Ä Ä 1-1/8-20 Ä Ä 1-3/8-24 Ä Ä 1-13/16-32 Ä Hose Oil Part No. Hose Oil Small hand tool to prick minute holes in the rubber cover To be used in gaseous applications where the pressure exceeds 250 psi riven into the cover every few inches of length either striking the hose or by a rolling action over the hose cover Not generally necessary to perforate the hose on all sides Shipping Weight: 2 lbs. ccrolube Part No. ccrolube Reduces torque and eliminates waste lubrication Use hose oil with the recommended hose assembly instructions Small rimper Hood Part No. 82-VR High efficiency lubricant used for stainless steel field attachable fittings ontains Teflon to reduce the wear between metal surfaces, protects against corrosion and ultimately eliminates galling Large rimper Hood Part No. 83-VR Water repellant UV protected Perfect for indoor and outdoor applications Fits Karrykrimp, Parkrimp Karrykrimp2, Minikrimp Water repellant UV protected Perfect for indoor and outdoor applications Fits PHastkrimp, Superkrimp Parkrimp2-29 Hose Products ivision Parker Hannifin orporation
atalog 4400 US Notes -30 Hose Products ivision Parker Hannifin orporation