Airfield Lighting Product Description 8 Omnidirectional Medium- Intensity Heliport Inset Light (IN- OMH) Boundary Marking of - Final Approach and Take Off area (FATO) - Touchdown and Lift Off area (TLOF) Aiming Point
Note: This page is blank for convenient double-sided printing.
1. INTRODUCTION The IN-OMH is an 8 omnidirectional medium-intensity heliport inset light. Utilisation Boundary marking of o Final Approach and Take Off area (FATO) o Touchdown and Lift Off area (TLOF) Aiming Point Compliance ICAO: Annex14 Volume II Paragraphs 5.3.6, 5.3.7, 5.3.8 and 5.3.10 FAA: AC 150/5390-2B NATO: STANAG 3652 French STAC 2009A019 CAP 168 BS 3224 2. MAIN ADVANTAGES Low power consumption. Low power consumption: only 50 Watts. Power Supply: 240 Vac (or 12 Vac) 50/60 Hz or 6,6 A. Lamp life greater than 4,000 hours. Low projection: 10 mm (<1/2"). Small diameter: 215 mm. Shallow depth: 100 mm shallow base Excellent photometric performances obtained by the use of reflector lamps: o Good luminous efficacy o Identical lamp performances: Reflector being an integral part of the lamp, hence each time the lamp is changed there will be a new reflector o High optical stability: No internal adjustment needed. Page 1 of 8
3. TECHNICAL CHARACTERISTICS Component Lamp: Power Supply: Photometry: Colour: Finish: IP: 67 Description Projection: 10 mm (<1/2 ). External diameter: Net Weight: 50 Watts / 12 Vac pre-focussed halogen lamp with an integral dichroic-coated 50 mm reflector (Lamp life greater than 4,000 hours. With a 2 x 1.5 mm² cable for 230 Vac version and with two cables of 1 x 3.2 mm² for 12 Vac version. Also available in 6,6 A. Distribution and homogeneity comply with Appendix 2 of I.C.A.O Annex 14 Volume I. White or Green dichroic filters. Chromaticity complies with Appendix 1 of ICAO Annex 14. Transmission Factor (when Hot): White = 0.04 - Green = 0.55. All external parts are made of anodised tempered aluminium alloy casting. All fixings and fastenings are stainless steel. 215 mm. 5 kg. Packing Data Designation Volume m 3 Dimensions mm Weight kg IN-OMH fitting complete 0.007 230 x 230 x 140 5.0 4. INSTALLATION OPTIONS Description 230 Vac/6,6 A power supply through a 230Vac/12Vac or 6,6 A transformer (see FIG 1). 12 Vac direct power supply (see FIG 2). For more information, see the Design section. Page 2 of 8
Image examples 5. PHOTOMETRICS This section includes photometric examples of different light configurations. Photometric examples F.A.T.O. Edge ICAO IN-OMH (1 x 50 Watts) White light T.L.O.F Edge ICAO IN-OMH (1 x 50 Watts) Green light Page 3 of 8
Photometric examples F.A.T.O. IN-OMH 105W 6,6A LAMP F.A.T.O. IN-OMH VERT 45W 6,6A LAMP Page 4 of 8
6. DESIGN Components IN-OMH 1. Body 2. Silicone prism gasket 3. Non-sealed prism 4. Prism Protection Plate in Teflon 5. Filter protection gasket 6. Dichroic filter 7. Optical support 8. Not used 9. Optical support fixing screws 10. 50 W under 12 Vac pre-focussed halogen dichroic reflector lamp (diameter 50 mm) 11. Lamp socket 12. Accessories for lamp socket connection 13. 230 Vac /12 Vac transformer (option) 14. Accessories for transformer fixing 15. 8" shallow base depth = 100 mm 16. Fixing screws (x 2) 17. O ring gasket for 8" shallow base 18. Compression packer kit for one cable with two wires 19. Compression packer kit for two cables with one wire 20. Cap for shallow base 21. Accessories for power supply connection Page 5 of 8
8. ORDER CODES The table below is a guide to order codes for a fitting with available component parts. Ordering Code Components IN-OMH 230VAC G Power 230 VAC 230VAC 12 VAC 12VAC 6,6 A 6,6A Colour(s) None (white) FATO + Aiming W Green TLOF G Additional Installation tools for shallow base. For more information, contact Safegate Group or see www.safegate.com. Fitting Ordering Code Components IN-OMH/A 45W Y RL Lamp 40 Watts (=> Short Cover) 40W 45 Watts (=> Long Cover) 45W 105 Watts (=> Long Cover) 105W Dichroic Filter None (White) W Blue Filter B Yellow Filter Y Cut Out Relay (Option) 1 Relays (=> Long Cover) RL Page 6 of 8
9. SPECIFICATION The F.A.T.O edge, T.L.O.F edge inset light shall be omnidirectional complying with ICAO recommendations in Annex 14, Volume II, paragraphs 5.3.6, 5.3.7, 5.3.8 and 5.3.10, with FAA standards, with STANAG 3652 standards, CAP 168 British Standards BS 3224, and STAC. It shall be equipped with one 12 Vac halogen pre-focussed dichroic reflector lamp not exceeding 50 Watts. Lamp life shall be greater than 4,000 hours. All external parts shall be made of anodised tempered aluminium alloy casting. All fixings and fastenings shall be stainless steel. It shall have a maximum outer diameter of 215 mm and its projection shall not exceed 10 mm. It will be design to allow easy maintenance. The prism shall not be sealed. The colour filter shall be dichroic. No internal adjustment shall be needed. Note: All descriptions and photometric characteristics in this publication present only general particulars and shall not form part of any contract. The right is reserved to change them without prior notification. Page 7 of 8
Check in to the future How many aircraft can your airport handle today? Can this number be increased without adverse effects on the airport s safety level? It is a known fact that traffic volume will rise in the foreseeable future. More movements will demand monitoring of the entire airport. Requirements will controlling not only ground movements but also air traffic close to the airport is of the highest interest. The International Civil Aviation Organization (ICAO) already describes A-SMGCS, Advanced Surface Movement Guidance and Control System, as the answer to the future modern airport need to control the entire airport To a larger extent than today s systems, A-SMGCS will rely on automated processes to give both pilots and traffic controllers exact information about positions and directions. Safegate Group delivers complete A-SMGCS solutions already, as well as all vital parts relating to it. Safegate Group can check Safegate Group HQ Djurhagegatan 19 SE-213 76 Malmö, Sweden Phone: +46 (0)40 699 17 00 Fax: +46 (0)40 699 17 30 E-mail: market@safegate.com Australia australia@safegate.com +61 (0)3 9720-3233 Austria office@avibit.com +43 316 429961 Brazil brazil@safegate.com +55 11 2137 4405 China china@safegate.com +8610-85275297 Dubai dubai@safegate.com +971 4 452 75 75 Finland finland@safegate.com +358 (0)20754 7700 France france@safegate.com +33 (0)1 42 99 60 40 Germany germany@safegate.co m +49 (0)4121 464 303 India india@safegate.com +91 11 4106 1545 Malaysia malaysia@safegate.co m +60 32 011 3522 Qatar qatar@safegate.com +974 436 9628 Russia russia@safegate.com +7 495 917 4614 Singapore singapore@safegate.c om +65 6289 6893 Spain spain@safegate.com +34 917 157 598 UK uk@safegate.com +44 (0)208 573 0384 USA usa@safegate.com +1 763 535 92 99 Safegate Group offers solutions for increased safety, efficiency and environmental benefits to airports worldwide. The company was founded in 1973 and has its headquarters in Malmö, Sweden. Safegate Group has more than 70 partners around the globe in order to be close to its customers. Earlier members of Safegate Group include Thorn AFL and Idman, who both have over 40 years of experience in airfield lighting solutions for airports and heliports. The latest member of Safegate Group is Avibit, a leading provider of next generation software applications and integration of efficient air traffic control systems. Page 8 of Safegate 8 Group s complete range of products and services, a onestop shop, provides solutions to customers and airborne travellers www.safegate.com around the globe.