CEELOK FAS-T CONNECTORS Small Form Factor, Field Terminable Connectors CeeLok FAS-T connectors ofer a small form factor, ield terminable I/O connector capable of 0 Gb/s Ethernet. Crimpsnap contacts enable easy termination and ield repairability. The integral backshell ofers easy 60-degree shield termination. The compact size 8 shell helps designers meet the needs of reduced SWaP (size, weight, and power). The connector s T-shaped contact pattern provides noise cancellation and decoupling to minimize crosstalk and increase signal integrity. HIGH SPEED Gigabit and 0 Gigabit Ethernet Compatible with Cat 5e, Cat 6A or Cat cables T-shaped pin pattern improves signal integrity through uniform crosstalk cancellation SPACE AND WEIGHT SAVINGS Compact Size 8 shell EASY TERMINATION AND FIELD REPAIRABILITY Crimp-snap, 9029-style contacts FLEXIBLE BACKSHELL/ SHIELDING OPTIONS Backshell integrated in plug body provides low proile, low cost, low weight strain relief and EMI protection Compatible with multiple braid termination techniques, adapter styles and seal boots RUGGED Scoop-proof design Insert assembly mechanically retained for 25 lb. retention force Robust coupling ring mechanism The CeeLok FAS-T connector is a true 00-ohm impedance connector that is compatible with Cat 5e and Cat 6A cables and protocols ranging from the USB and IEEE 94 to gigabit and 0G Ethernet. Performance Characteristics DATA RATES Gigabit and 0 Gigabit Ethernet when used with Cat 5e, Cat 6A or Cat cables ELECTRICAL Insulation resistance: 5000 MΩ ambient, 000 MΩ @ 5 C Dielectric withstanding voltage: 500 VAC @ sea level 00 VAC @ 0,000 ft. Shielding efectiveness: per MIL-DTL-8999 Shell-to-shell conductivity: 5 mv initial, 0 mv inal MECHANICAL Vibration, Sine: MIL-DTL-8999 Series III (60 g), 4 hrs per axis, no elevated temperature Vibration, Random: EIA-64-28 Condition VI Letter J (4.92 g) Durability: 500 mating cycles Contact Retention: 0 lb. min. Coupling Torque: 8 in-lb. max. ENVIRONMENTAL PROPERTIES Operating Temperature: -65 C to +5 C Sealing: Altitude Immersion: 0,000 ft. (mated condition) IP6: Mated condition IPX6 (water jet): Receptacle, panel mounted (unmated condition) Corrosion Resistance: 500 hr. salt mist black zinc nickel per AMS-24 MATERIALS Shell: Electroless nickel or black zinc for DOD-approved, RoHS-compliance, corrosion resistance (500 hr. salt mist) Insert: High-temperature thermoplastic for excellent temperature endurance Low dielectric constant for superior signal integrity Contacts: Beryllium copper alloy STANDARDS AND SPECIFICATIONS Product Speciication: 08-2482 Application Speciication: 4-2025 Instruction Sheet: 408-2046 Test Report: 50-4002 Electrical Performance Report: 505-6000
Contacts Plug Type Receptacle Box-Mount Receptacle Box-Mount Receptacle, PC Tail Jam Nut Receptacle, PC Tail Contacts Included Socket None Pin None Pin None Key Electroless Nickel Part No. Black Zinc Nickel N 2025-2025-2 A 2025-2025-4 B 2025-5 2025-6 N 2025-2025-8 A 2025-9 -2025-0 B -2025- -20254-2 N 20252-20252-2 A 20252-20252-4 B 20252-5 20252-6 N 20252-20252-8 A 20252-9 -20252-0 B -20252- -20252-2 N 2024-2024-2 A 2024-2024-4 B 2024-5 2024-6 N 2024-2024-8 A 2024-9 -2024-0 B -2024- -2024-2 N N 20245-20245-2 A A 20245-20245-4 B B 20245-5 20245-6 N N 2025-2025-2 A A 2025-2025-4 B B 2025-5 2025-6 Wire Size Pin Part No. Socket, Hooded 24 26 AWG 20249-20250-5 Application Tooling Hand Crimp Tool: M22520/2-0 Crimp Positioner: TE Part No. 225- Insertion/Extraction Tool: TE Part No. 226- Pin Socket Ø.04 Ø.04 Ø.050.40 Min. Ø.04 Section B-B Ø.020 Ø.05 Max. Ø.04.02 Min..40.5.5.24.250.5.55 B Ø.020 B.08 Ø.02
PRODUCT DIMENSIONS Boxmount Receptacle Kit Assembly Part No. 2024 Recptacle Assembly Plated Aluminum Shell See Detail A 5 5 Detail A Scale: 6: Pin Contact (20249-).50.9 Ø.66 Ø.585 Red Full Mate Indicator Jam Nut Receptacle Assembly, PC Tail Part No. 2025.60.25 Master Key.850 5 6 4 8 2 Master Key See Detail A X 4-40 UNF Thread O-Ring PCB Mount Aluminum Shell 5 6 8 2 4 Detail A Scale 5: /6" 24 Thread Triple Start 5/8' Modified Acme Thread Jam Nut
PRODUCT DIMENSIONS Receptacle Kit Assembly Part No. 20252.60.50.850 5 5 Detail A Scale: 6: Red Full Mate Indicator See Detail A Pin Contacts (20249-) Ø.698 ±.005 Jam Nut Receptacle Assembly Aluminum Shell.669 ±.002 /6" 24 Threads O-Ring Triple Start 5/8" Modified Acme Thread /8" Max. Panel Thickness Plug Kit Assembly Part No. 2025 Socket Contact (20250-5) Plug Assembly Aluminum Shell and Nut 5
PRODUCT DIMENSIONS Boxmount Receptacle Assembly, PC Tail Part No. 20245 Front Insert: Qty. Material: Black Thermoplastic 5/8 Modified Triple Start Acme Thread Internal Snap Ring: Qty. Material: Stainless Steel Red Full Mate Indicator Band Rear Insert: Qty. Material: Black Thermoplastic Contact Pins: Qty. 8 Material: Gold Plated Leaded Cooper.60.950 Master Key 4X Ø.094.2 2X.62 X 4-40 UNC Board Mounting Holes Receptacle: Qty. Material: Aluminum.25.2.9
PRODUCT DIMENSIONS Protective Cover Cap, Plug Part No. 222682- (.00) Lanyard Material: Stainless Steel Wire Rivet Material: Steel Finish: Black Zinc Nickel (Ø.685) (Ø.555) Rivet, Oval Material: 00 Series Stainless Steel Finish: Passivated Protective Cover Material: Aluminum Alloy 606-T6 Finish: Electroless Nickel Ring Material: Stainless Steel Finish: Passivated (.04) Interfacial Seal Material: Silicone Rubber Protective Cover Cap, Receptacle Part No. 22248- Protective Cover Ratchet Style Finish: See Table Lanyard: Material: Stainless Steel Wire 22248- and 22248-2 (Ø.840) Ring Material: 00 Series Stainless Steel Finish: Passivated (.000) Rivet Material: Steel Finish: Black Zinc Nickel (Ø.695) 22248- and 22248-4 (6.049) (.04) (Ø.42) Protective Cover Ratchet Style Finish: See Table (Ø.260)
ACCESSORIES SolderSleeve Shield Terminators Convenient and Efective Terminates a ground lead to cable shield in order to ground the shield Simple, quick termination Available with and without pigtails Versatile Center or end strip for ease of termination Handles wide range of high data rate cables and diameters Environmental Operating temperature: -55 C to +200 C Environmentally sealed Mechanically robust Physical or Other Properties Terminates tin, silver and nickel lat or round braids Provides 60 of shielding Product Ofering Contact TE for a complete listing of SolderSleeve shield terminators CRES-Lock Bandstraps Easy to Use Quick, easy, cost-efective and reliable termination of braided shielding High Performance Low proile, one-piece design eliminates EMI leakage paths Rugged Shock, vibration and environmental tested to meet aerospace and defense requirements Electrical Operating Temperature: -65 C to +200 C Electrical Resistance: Meets.0 mω requirement of AS85049/28 Corrosion Resistance: 500 hr. salt spray Mechanical Tensile Strength: 200 lb. Braid Retention: Meets 00 lb. requirement of AS85049/28 Application Tooling Micro Tie-Dex II, A099 Description Bandstrap Part No. BND-082S
ACCESSORIES Heat-Shrinkable Molded Boots Hazard Matched Diferent materials to meet diferent temperature and environmental requirements Optional with pre-applied adhesives for quick installation and high-reliability IP6 sealing Epoxy sealing kits available Versatile Sealing and strain relief to the wires and cables Straight or 90 degree cable exit Application Tooling HL90E or the HG-50A ThermoGun heat gun and appropriate hot air relectors Product Offering Temperature Range -20 C to 60 C -55 C to 20 C Material Adhesive Lined Size* mm Descriptive Part No. Straight 90 Flexible polyolein Yes 24/0.4/5.6 202K2-4/42-0 222K2-4/42-0 Flexible polyolein Yes 0/4.2/5.9 202K2-4/42-0 222K2-4/42-0 Fluid-resistant elastomer Yes 0/4.2/5.9 202K2-25/86-0 222K2-25/86-0 -55 C to 5 C Flexible polyolein No 0/4.2/5.9 202K2-4-0 222K2-4-0-55 C to 200 C -5 C to 50 C Modiied luoroelastomer Fluid-resistant elastomer Fluid-resistant elastomer *Size = as-supplied diameter both ends/recovered diameter connector end/recovered diameter cable end. No 0/4.2/5.9 202K2-2-0 222K2-2-0 Yes 0/4.2/5.9 202K2-25/225-0 222K2-25/225-0 No 0/4.2/5.9 202K2-25-0 222K2-25-0 High-Data-Rate Cables Compact and Lightweight Thin-wall technology for smaller, lighter cables 28 AWG to 22 AWG conductors Versions for Common Protocols Fast and Gigabit Ethernet in Cat 5e and Quadrax conigurations IEEE 94 USB Rugged Specialized TE developed polymer formulations designed to support better mechanical and thermal performance in harsh environments State-of-the-art FAA approved foam dielectrics for better signal transmission Ruggedized zero halogen jacket for marine applications that passes the rigorous military standards for lammability while meeting stringent smoke and toxicity requirements Customizable Customizable to meet missioncritical needs such as EMI, luid resistance, and lammability Hybrid designs Electrical testing capability, including skew and eye patterns Robust Operating temperature range from -55 C to +200 C Full range of shielding options for signal integrity