info@morakniv.se morakniv.se facebook.com/morakniv @morakniv #morakniv Made in Mora, Sweden since 1891 Firmly anchored in a long tradition of craftsmanship, our first factory was founded on the outskirts of Mora in 1891. It successfully combined the benefits of hand-forged blades and industrial manufacture. The result was a knife with a grip-friendly handle and a very sharp and robust blade. Today, the knife from Mora is known for its high quality and is also recognized as a national symbol of Sweden.
Your Morakniv warranty lasts a lifetime A knife from Morakniv is a robust tool that is meant to last. Morakniv guarantees any knife that we sell to be free from defect in material, construction or workmanship for the life of the product under normal use and following the care instructions. If the knife is defective due to materials or workmanship, we will repair it at no cost or replace it with a new knife of the same or an equivalent model.* Morakniv is proud and well known for our high quality. Our customers shall feel confident in buying a Morakniv and that it will last for a long time under tough conditions. *Read more about the terms of the warranty on www.morakniv.se/warranty. Morakniv supplies knives to Kings and soldiers We at Morakniv are proud of our reputation for quality and durability. Our customers can feel confident that their Morakniv will perform again and again, even under tough conditions. Morakniv is the official supplier to the Swedish Armed Forces and has also been approved as Royal Purveyor by His Majesty the King of Sweden. Morakniv is the knife of choice for units in Scandinavia, the Baltic states and the UK, who recognize that a reliable knife is vital to their soldiers. We have a great dialogue with military users, which gives us a significant advantage in product development. Morakniv 2000 Green The perfect outdoor knife with just the right feel. The discrete green color of the handle and the sheath makes the knife easy to hide - it blends in with the surroundings and your other equipment. 109mm 224 mm Item No. 15pcs-display: 10629 Item No. 1 pcs-pinpac 5/ctn: 12161 Made in Mora Sweden Since 1891 10 Made in Mora Sweden Since 1891 YEARSLIFETIME WARRANTY Made in Mora Sweden Since 1891 10 YEARS Morakniv 2000 This is our number one all time military classic. Mora 2000 has become a well-known concept for anyone who spends time in demanding outdoor environments. It is a high-quality knife with a profile ground, multifunctional blade as well as a contoured highfriction grip handle. The blade is made of Swedish stainless steel and the polymer sheath comes with a flexible leather strap. Blade length. Morakniv 2000 Orange If the green version of this model is easy to hide - the orange one is easy to find. The orange details of the handle and the matching sheath provide high visibility. 224 mm Item No. 15pcs-display: 12057 Item No. 1 pcs-pinpac 5/ctn: 12209
Morakniv Companion The Morakniv Companion series features all-in-one outdoor knives with contoured high friction grip handles. It is simple and affordable, yet flexible and reliable. The perfect entry knife! The impact resistant and grip-friendly handle, as well as the ¾ tang, ensures a strong, stable and powerful knife that becomes a natural part of your every day work. Morakniv Companion Black Blade Blade of stainless steel with a black ED-coating. Polymer sheath with a belt clip. Item No. 1 pcs-box 12/ctn: 12553 Morakniv Companion Black Blade of stainless steel. Ergonomic handle with a soft high friction grip. Polymer sheath with a belt clip. Item No. 15pcs-display: 12141 Item No. 1 pcs-pinpac 5/ctn: 12092 Morakniv Companion Heavy Duty F (C) Powerful tool with a slightly thicker blade of carbon steel and an extra large ergonomic handle with a soft high friction grip. The fluorescent color provides high visibility and makes it easy to locate in all conditions. 224 mm Item No. 1 pcs-pinpac 5/ctn: 12211 Item No. 1 pcs-box 15/ctn: 12495 Morakniv Companion MG (C) Blade of carbon steel. Contoured high friction grip. Dark green polymer sheath with a belt clip. Non ground blade spine. 2,0 mm Item No. 15pcs-display: 11863 Item No. 1 pcs-pinpac 5/ctn: 12216 Morakniv Companion MG (S) Blade of Swedish stainless steel. Contoured high friction grip. Dark green polymer sheath with a belt clip. Item No. 15pcs-display: 11827 Item No. 1 pcs-pinpac 5/ctn: 12215 Morakniv Companion Heavy Duty MG (C) The knife has a slightly thicker blade of carbon steel with high load capacity that is easily resharpened. A very powerful and reliable knife in a color that blends in with your equipment. Polymer sheath with a belt clip. 224 mm Item No. 1 pcs-pinpac 5/ctn: 12210 Item No. 1 pcs-box 15/ctn: 12494
Morakniv Bushcraft and Tactical Our knives have been used by various armed forces for decades, but never as widely as they are today. The combination of high quality and affordability gives Morakniv a unique appeal. The knife blades are designed to withstand tasks such as cutting and opening ammunition cases, tins, MRS and belts. A Morakniv can be used for all these which put the knife to the real test and it is easily resharpened for continued top class performance. The knife blades are made of high-quality carbon or stainless steel, selected and honed to suit the expected use. All our steel is hardened and tempered through a secret process that increases the durability of the knife and reduces the risk of corrosion. Ergonomic handle in TPE makes the knife both comfortable and efficient to work with. The handle is balanced to sit correctly in your hand, and features a neat grip that allows you to work with power and precision. Total length The unique, force absorbing tang extends ¾ of the way into the handle, making its impact resistance second to none. Morakniv Bushcraft Black One of the most sturdy knives we have ever made. The blade of specially heat treated carbon steel that is very resistant to breakage. The black DLCcoating protects against corrosion and prevents blade reflections. The spine is ground specially for use with a fire starter. It comes with a polymer sheath with loop and interchangeable belt clip. Item No. 1 pcs-pinpac 5/ctn: 10791 Item No. 1 pcs-box 15/ctn: 12490 Morakniv Bushcraft Black SRT It is sturdy, robust and the SRT model has a halfserrated blade - perfect for cutting rope and fiber. The stainless steel makes the blade easy to maintain, and the DLC-coating decreases blade reflections. The spine is ground especially for use with a fire starter. It comes with a polymer sheath, loop and interchangeable belt clip. Item No. 1 pcs-pinpac 5/ctn: 12417 Item No. 1 pcs-box 15/ctn: 12491 Blade length Bushcraft Black has a DLC coating: a dark, hard, scratchresistant coating of titanium oxide. It is very thin, only about 1,5μm. The coating protects the carbon steel from corrosion but it is not a complete protection. When the blade is made of carbon steel it must be cared for. Keep it clean and dry and oil the blade after use. Companion Black Blade and Tactical have an ED-coating that gives the blade a dark colored layer, approximately 20μm thick. A vital part of you Our knives are extremely sharp and remain so for a long time. They are balanced to sit correctly in the hand and feature a neat grip that allows you to work with both power and precision. The feeling of being in full control makes it possible for you to perform vital and important tasks with total trust in your knife. No matter where you are and what you do - your knife is a crucial part of you.
Morakniv Bushcraft Survival Morakniv Bushcraft Orange The orange coloured grip and sheath make the knife highly visible. The Swedish stainless steel, tempered according to our secret recipe, ensures that the blade stays sharp for a long time, is extremely tolerant and has considerable cutting strength. The spine is ground especially for use with a fire starter. The sheath comes with a loop and interchangeable belt clip. 109mm 232mm Item No. 1 pcs-pinpac 5/ctn: 12050 Item No.1 pcs-box 15/ctn: 12492 A robust knife for those with high demands: the razor sharp blade with a distinctive tip makes the Bushcraft Survival a reliable partner. The fire starter jutted to the sheath is quick and easy to use - whatever the weather. The sheath is completed with a diamond sharpener so that the knife always can be resharpened. An interchangeable belt clip and a belt loop accompanies the polymer sheath. The handle has a high-friction grip that ensures that the knife always lies safely in your hand. Avaliable in two models: Black with a blade of carbon steel, and Orange with a blade of stainless steel. Morakniv Bushcraft Forest With a discrete forest green grip and a polymer sheath of the same color, this model is the perfect forest saviour. The slightly thinner, profile ground blade made is also made of Swedish stainless steel. Item No. 1 pcs-pinpac 5/ctn: 12356 Item No.1 pcs-box 15/ctn: 12493 Morakniv Bushcraft Survival Black The blade is made of anticorrosive black DLCcoated high carbon steel and the spine is specially grounded for use with the fire starter. Item No. 1 pcs-pinpac 5/ctn: 11742 Morakniv Pathfinder A model with a longer blade of high carbon steel with a black anticorrosive DLC-coating. The spine of the blade is ground specially for use with a fire starter and comes with a MOLLEcompatible sheath of heavy-duty nylon. 170 mm 295 mm Item No. 1 pcs-box 12/ctn: 12355 Morakniv Bushcraft Survival Orange Blade of stainless steel. Item No. 1 pcs-pinpac 5/ctn: 12051
MOLLE SYSTEMS MOLLE (Modular Lightweight Load-carrying Equipment) uses rows of heavy-duty nylon stitched onto the vest or pack to allow for attachment of various MOLLE-compatible pouches and accessories. These are called PALS (Pouch Attachment Ladder System) and give you multiple carrying options. Morakniv Tactical A first rate knife that is ideal for all sorts of field and outdoor tasks. The knife has an anti-corrosive black DLC-coated and a blade of high carbon steel. This combination protects the knife against corrosion as well as making it razor sharp. In other words: the knife is always ready to perform the tasks required. The spine of the blade is ground especially for use with a fire starter. It comes with a MOLLE-compatible sheath of heavy-duty nylon. Item No. 1 pcs-box 15/ctn: 12294 Morakniv Tactical SRT The half-serrated blade is perfect for cutting rope and fiber, and the stainless steel with a black anticorrosive DLC-coating is outstandingly sharp. The spine of the blade is ground especially for use with a fire starter. It comes with a MOLLEcompatible sheath of heavy-duty nylon. Item No. 1 pcs-box 15/ctn: 12295 MOLLE-compatible sheath with Pouch Attachment Ladder System (PALS) provides multiple carrying options and ensures that your knife is always within reach.
Morakniv to the Rescue When time is short and the situation is getting intense, you need to have complete trust in your equipment. Our Morakniv knives, with models specifically designed for rescue forces, have unique characteristics ideal for these demanding situations. The fluorescent colors make the knives easily and rapidly located in an emergency. The serrated blades are designed to cut rope, nylon and fiber. Our knives are used by firefighters, police, coast guards, and other professions where a reliable knife can make the difference between life and death. Morakniv Companion Orange The ultimate all-in-one knife with a blade of stainless steel. Ergonomic handle with a soft high friction grip. Highly visible orange polymer sheath with a belt clip. Item No. 15pcs-display: 11824 Item No. 1 pcs-pinpac 5/ctn: 12090 Morakniv Companion F Serrated The serrated edge has been developed for cutting rope, nylon and fiber. The stainless steel is easy to maintain and stays sharp for a long time - so you can focus on the job in hand. The fluorescent polymer sheath is highly visible and comes with a belt clip. Serrated edge Item No. 15pcs-display: 11829 Item No. 1 pcs-pinpac 5/ctn: 12214 General Outdoor Morakniv 510 The wilderness blade, ideal for woodworking performance. Light and very sharp with an impact resistant black handle. Blade of carbon steel. 2,0 mm 95 mm 208 mm Item No. 15pcs-display: 11732 Morakniv Marine Rescue 541 Impact resistant black handle with substatial finger protection. The contoured grip ensures safe handling in marine environments. Serrated edge with blunt tip to prevent injuries. Blade of Swedish stainless steel. Polymer sheath. 2,0 mm 91 mm 198 mm Item No. 20 pcs-bulk: 11529 Serrated edge, blunt tip Morakniv Companion F Rescue blunt Blade of stainless steel with a serrated blade, perfect for cutting rope, nylon and fiber. The safety tip prevents injuries. The red fluorescent polymer sheath makes it easy to locate the knife. The sheath comes with a belt clip, so it can always be kept close by. 99 mm 214 mm Item No. 15pcs-display: 11828 Item No. 1 pcs-pinpac 5/ctn: 12213 Morakniv 748MG Robust knife with an extra long stainless steel blade and an ergonomically contoured highfriction grip, comfortable for prolonged usage. Impact resistant with a finger protection for safe use in extreme and demanding conditions. Black polymer sheath. 148 mm 275 mm Item No. 1 pcs-box 12/ctn: 12475
Mora of Sweden Box 407 SE-792 27 Mora Sweden Tel +46 250 59 50 00 Fax +46 250 59 50 01 info@morakniv.se www.morakniv.se www.morakniv.se Made in Sweden by Morakniv since 1891. Item: 12747.