9B7B7B7B 3B3B 16B14B14B14B9B431B437B434B 0B0B0B0B0B 1B1B1B1BER-TFTV070-3 TFT Display with Driver Board Datasheet ISO9001 Registered Company sira CERTIFICATION 011 Technology Co., Limited 4B4B4BAttention: A. Some specifications of IC are not listed in this datasheet. Please refer to the IC datasheet for more details. B. The related documents for interfacing, demo code, ic datasheet are all available, please download from our web. C. Please pay more attention to INSPECTION CRITERIA in this datasheet. We assume you already agree with these criterions when you place an order with us. No more recommendations. 10B8B8B8B3BREV 11B9B9B9B4BDESCRIPTION 13B11B11B11B6B 1.0 14B12B12B12B7BPreliminary 12B10B10B10B5BRELEASE Release 15B13B13B13B8Dec-28-2013 DATE URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 1 of 24
25B24B21BHHHHHHHHHHHH 25B24B21BHHHHHHHHHHHH 18B15B15B15B10HHHHHHHHHHHHHHHHHHHHHHH 710B17BCONTENTS 19B18BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 1. ORDERING INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 04U 20B19B19B19B14B14BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 1.1 Order Number - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - 0HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 4 HHHHHHHHHHHHHHHHHHH 1.2 Accessory List - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 04H21BHHHHHHHHHHHH 21BHB20B20B15BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 2. SPECIFICATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05U 23B22B19B19B14B14BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 2.1 Display Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05 24B23B20B20B15BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 2.2 Mechanical Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05 HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 2.3 Electrical Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05 26B25B22B21BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 2.4 Optical Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05 27B26B23B22B13BHHHHHHHHHHHHHHHHHHHHHHHHHHUHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 3. OUTLINE DRAWING- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 06U 28BHBHHHHHHHHHHHHHHHH25B22B21BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH24B23B20B20B15BHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 3.1 TFT LCD Display Outline Drawing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 06HHHHHHHHHHHH HHHHHHHHHHHH3.2 Main Board / Keyboard / Remote Control Outline Drawing - - - - - - - - - - - - - - - - - - - - - - - - - - - - 07HHHHHHHHHHHHHHHHHHHHHHHHHH 3.3 Power,Keyboard,Video (CVBS),VGA Cable with Terminal Outline Drawing - - - - - - - - - - - - - - - - 08HH 29B21B18B18BHHHHHHHHHHHHHHHHHHHHUHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 4. ELECTRICAL SPEC - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09U 30B22B19B19B14B14BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 4.1.1 CN101 (TFT Display) Pin Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09HHHHHHHHHHHHHHH 4.1.2 HHHHHHHHHHHHHHHHHHHHHHHHH J1 (Power) Pin Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10HHHHHHHHHHHHHHHHHHHHHHHHHH 4.1.3 J2 (Video or CVBS) Pin Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10HHHH 4.1.4 HHHHHHHHHHHHH24B23B20B20B15BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHJ3 (Keyboard) Pin Configuration- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 4.1.5 HHHHHHHHHHHHHHHHHHHHHH J4 (VGA) Pin Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 4.1.6 Keyboard Desciption- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12HHHHHHHHHHHHHH 4.1.7 HHH24B23B20B20B15BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH Remote Control Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 4.2 HHHHHHHHHHHHHHHHHHHH Absolute Maximum Ratings for TFT Display- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 HHHHHHHHHHHH HHHHHHHHHH4.3 Electrical Characteristics for TFT Display- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 36BHH31B28B26B29BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 5. INSPECTION CRITERIA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14 37B32B29B27B30BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 5.1 Acceptable Quality Level - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1HH4HHHHH 38B33B30B28B31BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 5.2 Definition of Lot - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1HH4HHHHHHHHHHH 39B34B31B29B42BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 5.3 Condition of Cosmetic Inspection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1HH4HHHHHHHHHHHHHHH 40B35B32B30B43BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 5.4 Module Cosmetic Criteria - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1HH5HHHHHHHHHHHHHHHHH 41B36B33B31B44BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 5.5 Screen Cosmetic Criteria (Non-Operating) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1HH7HHHHHHHHHHH 42B37B34B32BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 5.6 Screen Cosmetic Criteria (Operating) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1HH8HHHHHHHHHHHHHHHHH URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 2 of 24
43B38B35B33B45BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 6. PRECAUTIONS FOR USING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20 44B39B36B34B31BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 6.1 Handling Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - HH20HHHHHHHHHH 45B40B37B35B42BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 6.2 Power Supply Precautions- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21 46B41B38B36B43BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 6.3 Operating Precautions - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21 47B42B39B37B44BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 6.4 Mechanical/Environmental Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21 48B43B40B38BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 6.5 Storage Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21 49B44B41B39BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 6.6 Others - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21 7. 50B42B40BHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH USING LCD MODULES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22 51B46B43B41B31BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.1 Liquid Crystal Display Modules - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22 52B47B44B42B42BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.2 Installing LCD Modules - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - HHHHHHHHHHHHHHHHHHHHHHHH 22HHH 53B48B45B43B43BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.3 Precaution for Handling LCD Modules - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23 54B49B46B44B44BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.4 Electro-Static Discharge Control- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23 55B50B47B45BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.5 Precaution for Soldering to LCM- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23 56B51B48B46BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.6 Precaution for Operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2HH4HHHHHHHHHHHHHHHHH 57B52B49B47BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.7 Limited Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2HH4HHH 58B53B50B48BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.8 Return Policy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24 URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 3 of 24
738B720B84B 1. 59B54B51B49BB451B737B457B454B ORDERING INFORMATION 60B55B52B461B718B 1.1 Order Number Part 61B60B57B54B47B Number(Order Number) 63BER-TFTV070-3 62B61B58B55B48BDescription 64B7 inch TFT-LCD Display with VGA+Video(CVBS)+HDMI Board and Keyboard Cable with Terminal (J6) 706B65B1.2 Optional Accessory List 66B60B57B54B47BAccessory Name 67B61B58B55B48BQuantity 68BPosition 69B7 inch 4-wire Resistive Touch Panel 70B1 piece 71BN/A USB Port 4-Wire Touch Panel Driver Board 1 piece N/A Video (CVBS) Cable with Terminal 1 piece J5 75BPower Cable with Terminal 76B1 piece 78BVGA Cable with Terminal 79B1 piece 77BJ3 80BJ4 81BRemote Control (Optional) 82B1 piece 83BN/A URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 4 of 24
2. 88B58B55B52B140B707B435B432B429B SPECIFICATION 713B89B440B59B437B56B434B53B 2.1 Display Specification ITEM 90B60B57B54B47B STANDARD 91B61B58B55B48B VALUE 92B62B59B56B49BUNIT 93B63B60B57B50BDisplay Format 96B66B63B60B68BDisplay Connector 99B69B66B63BFPC Connector 102B70B67B64B86BOperating Temperature 100B50 Storage 105B73B70B67B89B Temperature 108BTouch Panel Optional 109BYes 111B82B79B76BSunlight Readable 114BApplication 112B83B80B77B 800(RGB)x 94B64B61B58B51B 480 Dots FPC 97B67B64B61B69B Pin,0.5mm Pitch, SMD Horizontal Type Top Contact 101B-- -20 103B71B68B65B87B ~ +70-30 106B74B71B68B90B ~ +80 107B75B72B69B91B -- 110B81B78B75B No -- 113B84B81B78B 115BPortable Product/Industrial Device/Hand-held/Security, Instrument Display/Office Electronics -- 95B65B62B59B52B -- 98B68B65B62B70B 104B72B69B66B88B 116B-- 117B2.2 Mechanical Specification ITEM 118B86B83B80B 119B87B84B81BSTANDARD VALUE 120B88B85B82BUNIT 121B89B86B83BDiagonal Size 7.0 122B90B87B84B 123B91B88B85Binch 124BOutline Dimension for TFT Display 125B164.9(W) x100.0(h) 126Bmm 127B92B89B86BActive Area 128B154.08(W) x 85.92(H) 129B93B90B87Bmm 130B99B96B93BPixel Size 133B102B99B96B92BGross Weight 131B0.0642(W) x 0.1790(H) 132B101B98B95Bmm 411 134B103B100B97B93B g 135B104B101B98B94B 136B2.3 Electrical Specification ITEM 137B106B103B100B IC 140B109B106B103B71B Package Driver 143B112B109B106B71B STANDARD 138B107B104B101B VALUE COG 141B110B107B104B72B OTA7001A_V03 144B113B110B107B72B UNIT 139B108B105B102B -- 142B111B108B105B -- 145B114B111B108B Interface 146B115B112B109B95B Video(CVBS)/VGA/HDMI -- 148B117B114B111B 150BResponse Time (Typ) 151B10 152Bms 153B2.4 Optical Specification ITEM 154B119B116B113B LCD 157B122B119B116B53B Type Viewing 160B128B125B122B62B Angle Range 161B129B126B123B63BLeft:70, Colors 163B131B128B125B56B Contrast 166B134B131B128B59B Ratio (Typ) 169Brightness (Typ) 170B200 STANDARD 155B120B117B114B VALUE TFT-LCD 158B123B120B117B54B / Transmissive / Positive Right:70, 65K/262K/16.7M 164B132B129B126B57B UNIT 156B121B118B115B Up:50, Down:70 deg 162B130B127B124B64B 500:1 167B135B132B129B60B -- 168B136B133B130B61B 171Bcd/m2 -- 159B124B121B118B55B -- 165B133B130B127B58B URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 5 of 24
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 740B172B459B137B456B134B453B 3. OUTLINE DRAWING H 755B173B3.1 TFT LCD Display Outline Drawing Unspecified Tolerance: ±0.20 DESIGN BY: CHECKED BY: Technology Co.,Ltd UNITS: mm JIM DATE: 2012/10/09 MODE NUMBER : ER-TFT070-2 APPROVED BY: DO NOT SCALE THIS DRAWING. PROJECTION SHEET: DATE: 1 Of 1 URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 6 of 24
708B175B 1 1 2 1 1 1.colayispuydEASTRISING TECHNOLOGY CO.,LTDb1 728B174B3.2 Main Board / Keyboard / Remote Control Outline Drawing REV DESCRIPTION DESIGN DATE A 1'ST DEGIN JAVEN Dec-26-2013 1,60±0,1 Main Board Outline Drawing MAX 2.0 Remote Control Outline Drawing R4,15±0,2 R1,00±0.1 R1,65±0.2 39,70 LCD REMOTE R3,15±0.15 6,00±0,3 12.5±0.3 30,80±0,3 VIDEO SELECT 8,80±0,3 8,50±0,3 1,85±0,3 12,00±0,3 3,00±0,5 22,80±0,3 27,30±0,3 21,50±0,3 15,00±0,3 4,00±0,5 10,50±0,3 3,10 85,80 MENU MODE SELECT DCIN 1,00±0,5 J3 J1 6 1 1 4 DB15 RCA1 HDMI J5 1 J4 12 1 5 RTD2660H J6 29 30 CN1 LVDS 50 CON1 6,00±0,5 1,60±0,3 60,30±0,2 1 10 4-R1,50±0.1 59,80±0,2 65,60±0,3 2,30±0,3 34,75±0,3 6,50 11,00±0,3 77,25±0,2 90,60±0,3 200.0±5.0 m TEL:86-755-33503871 33503873 FAX:86-755-33507642-801 UNITS MM GENERAL TOL. MODEL NUMBER : DATE APPROVALS SCALE: N.T.S. APP ER-DBT-50P-1 CHK 1 PROJECTION SHEET: DO NOT SCALE THIS DRAWING. 130624 DWN JIM 17,25±0.3 6.0±0.3 Customer Approved by: DPower Adapter: 9 to12v >=1000mA Key Board Outline Drawing (J6) PCB 76,00±0.3 69,900±0.3 60,650±0.3 15,150±0.3 23,725±0.3 36,325±0.3 52,025±0.3 5,90±0.3 11,50±0.3 PCB 16,00±0.3 ON/OFF S1 4,30±0.3 S2 Menu J1 10 S3 - + S4 S5 AUTO 4,30±0.3 Turn on : YellowGreen Turn off : Red 6,00±0.3 11,30±0.3 7,55±0.5 54,30±0.3 7.50±1.0 PCB 1,60±0.1 MAX 2.0 50 pin to 40 pin Adaptor Board 40,00±0,3 FFC 0,50±0.1 CN3 P0.5*49=24,50±0.1 25,50±0.2 50PIN INPUT 50 W0,25±0.05 40PIN TTL ONPUT 40 CN2 40,00±0,3 40PIN LVDS ONPUT 40 CN1 URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 7 of 24
3.3 Power,Keyboard,Video (CVBS),VGA Cable with Terminal Outline Drawing 292.0±3 4,50±0.2 3,90±0.2 278.0±3 21,50±0.2 P2,00 3,40±0.2 16.33±0.2 2,29 TEL:86-755-33503871 33503873 FAX:86-755-33507642-801 UNITS MM GENERAL TOL. MODEL NUMBER : DATE APPROVALS R1,25 SCALE: N.T.S. APP CHK 1 uydeastrising TECHNOLOGY CO.,LTDbisplay.coREV DESCRIPTION DESIGN DATE 1'ST DEGIN JAVEN Dec-26-2013 A Key Board Cable with Terminal (J6) 20,50±0.3 R5,50±0,2 R4,15±0.2 R1,65±0.2 R5,50±0,2 R4,15±0.2 R1,65±0.2 11,30±0,2 11,30±0,2 8,30 39,50±0,3 6,50 m ER-DBT-50P-1 PROJECTION SHEET: DO NOT SCALE THIS DRAWING. 130624 DWN JIM Power Cable with Terminal (J3) 200.0±3 180.0±3 12,80±0.3 15,30±0.3 20,50±0.3 R3,15±0.15 R1,00±0.1 13,30±0.3 1,50±0.2 Video (CVBS) Cable with Double Terminals (J5) 560.0±5 514.0±5 375.0±3 34,50±0,3 0.90±0.1 8,50±0.3 13,50±0,3 VGA Cable with Terminal (J4) 165.0±3 13,00 126.0±3 32,00±0.3 3,96 24,50±0.3 7.9±0.2 8,50±0.3 URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 8 of 24
176B138B135B132B141B460B457B454B716B 4. ELECTRICAL SPEC 723B177B448B139B445B136B442B133B741B 4.1 Pin Configuration 756B178B4.1.1 CON1 (TFT Display) Pin Configuration 140B137B134BPin 141B138B135No 142B139B136BSymbol 146B143B140B1 VLED+ 149B146B143B2 VLED+ 155B152B149B3 VLED- 161B158B155B4 VLED- 166B163B160B5 GND 145B142B139BDescriptions Power for LED backlight (Anode) Power for LED backlight (Anode) Power for LED backlight (Cathode) Power for LED backlight (Cathode) Power ground 6 VCOM Common voltage 7 DVDD Power for Digital Circuit 8 MODE DE/SYNC mode select 9 DE Data Input Enable 10 VS Vertical Sync Input 11 HS Horizontal Sync Input 12 B7 Blue data(msb) 13 B6 Blue data 14 B5 Blue data 15 B4 Blue data 16 B3 Blue data 17 B2 Blue data 18 B1 Blue data 19 B0 Blue data(lsb) 20 G7 Green data(msb) 21 G6 Green data 22 G5 Green data 23 G4 Green data 188B18524 G3 190B187B184B25 G2 Green data Green data 26 G1 Green data 27 G0 Green data(lsb) 28 R7 Red data(msb) 192B189B186B29 R6 Red data 30 R5 Red data 31 R4 Red data 32 R3 Red data 33 R2 Red data 34 R1 Red data 35 R0 Red data(lsb) 36 GND Power Ground URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 9 of 24
59B180B 37 DCLK Sample clock 38 GND Power Ground 39 L/R Left / right selection 40 U/D Up/down selection 41 VGH Gate ON Voltage 42 VGL Gate OFF Voltage 43 AVDD Power for Analog Circuit 44 RESET Global reset pin. 45 NC No connection 46 VCOM Common Voltage 47 DITHB Dithering function 48 GND Power Ground 49 NC No connection 50 NC No connection 4.1.2 J1 (Power) Pin Configuration Pin No Symbol Description 1 +12V Power Supply (Suggested power adaptor should be 12V/1000mA in output, and center pin for positive voltage and the outer shield for negative voltage) 2 +12V Power Supply (Suggested power adaptor should be 12V/1000mA in output, and center pin for positive voltage and the outer shield for negative voltage) 3 GND Ground 4 GND Ground (Video or CVBS) Pin Configuration Pin No Symbol Description 759B180B4.1.3 J5 1 ACC Voltage Input 12V for Reverse Sensor 2 Video-1 (CVBS-1) Video (CVBS) Signal Input 1 3 GND Ground 4 Video-2 (CVBS-2) Video (CVBS) Signal Input 2 5 GND Ground URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 10 of 24
725B183B 724B181B4.1.4 J6 (Keyboard) Pin Configuration Pin No Symbol Description 1 VCC Keyboard Power 2 GND Ground 3 IR Infrared Receiver 4 K1 Power on/off (ON/OFF) 5 K2 Menu (Menu) 6 K3 Volume Increase (+) 7 K4 Volume Decrease (-) 8 K5 AV / VGA Signal Select (AUTO) 9 LED-R LED Indicator Light in Red Color 10 LED-G LED Indicator Light in Green Color 758B182B4.1.5 J4 (VGA) Pin Configuration Pin No Symbol Description 1 GND Ground 2 V VGA Vertical Signal Input 3 H VGA Horizontal Signal Input 4 GND Ground 5 R-IN VGA Red Input 6 GND Ground 7 G-IN VGA Green Input 8 GND Ground 9 B-IN VGA Blue Input 10 GND Ground 11 SDA Used for Upgrade Software 12 SCL Used for Upgrade Software URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 11 of 24
752B209B 4.1.6 Keyboard Description 184B<AUTO>: Press the <AUTO> key to switch the input signal between Video and VGA. 185B<MENU>: Menu s definition under Video(CVAS) state 186Brightness: Adjust the photo brightness. 187BContrast: Adjust the photo contrast. 18BHue: Adjust the photo hue. 189BSaturation: Adjust the photo Saturation. 190BDisplay Ratio: Select panel display ratio in16:9 or 4:3 191BLanguage: Select the language. 192BSleep: Select the turn off times. 193BReset: Restore the default settings. 194BExit: Exit menu. 195BMenu s definition under VGA state 196Brightness: Adjust the photo brightness. 197BContrast: Adjust the photo contrast. 198BHue: Adjust the photo hue. 19BSaturation: Adjust the photo Saturation. 20BDisplay ratio: Select panel display ratio in 16:9 or 4:3 201BLanguage: Select the language. 202BSleep: Select the turn off times. 203BReset: Restore the default Settings. 204BAuto config: Auto adjust image. 205BExit: Exit Menu. 206B<+>:Press <+> button to move the cursor from up to down on the OSD Menu,or reduce the parameters value from small to large 207B<->:Press <-> button to move the cursor from down to up on the OSD Menu,or reduce the parameters value from large to small. 208B<ON/OFF> :On means power on, Off means power off. 4.1.7 Remote Control Description 210BThe remote control includes five buttons, they re Video Select (=<AUTO>),Menu,+,- and Power (ON/OFF) The function is the same with Keyboard. Mode Select button is invalid. URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 12 of 24
704B21B4.2 Absolute Maximum Ratings for TFT Display 43B251B430B248B427B245B 252B249B246BITEM 258B25B252B Power Supply Voltage 253B250B247BSYMBOL 254B251B248BMIN. 255B252B249BTYP. 256B253B250BMAX. 257B254B251BUNIT Remark VCDVDD -0.3-5.0 260B257B254BVV AVDD 6.5-13.5 V VGH -0.3-40.0 V VGL -20.0-0.3 V VGH-VGL - - 40.0 263B260B257Boperating temperature 264B261B258BTTop -20 - +70 C 265B262B259Bstorage temperature 266B263B260BTST -30 - +80 C LED Reverse Voltage VR - - 1.2 V LED Forward Current IF - - 25 ma Each LED Note 2 Humidity RH - 90%(Max60 C) RH Each LED Note 1: The absolute maximum rating values of this product are not allowed to be exceeded at any times. Should a module be used with any of the absolute maximum ratings exceeded, the characteristics of the module may not be recovered, or in an extreme case, the module may be permanently destroyed. Note 2: VR Conditions: Zener Diode 20mA 4.3 Electrical Characteristics for TFT Display 433B251B430B248B427B245B 252B249B246BITEM 253B250B247BSYMBO254B251B248BMIN. 255B252B249BTYP. 256B253B250BMAX. 257B254B251BUNIT Remark L 258B25B252B VCDVDD 3.0 3.3 3.6 260B257B254BVV Note 2 Power Supply Voltage AVDD 10.2 10.4 10.6 V VGH 15.3 16.0 16.7 V VGL -7.7-7.0-6.3 V Input logic High voltage 264B261B258BTVIH 0.7DVDD - DVDD V Input logic low voltage 266B263B260BVIL 0-0.3VDD V Note 1: Be sure to apply DVDD and VGL to the LCD first, and then apply VGH. Note 2: DVDD setting should match the signals output voltage (refer to Note 3) of customer s system board. Note 3: DCLK,HS,VS,RESET,U/D, L/R,DE,R0~R7,G0~G7,B0~B7,MODE,DITHB. Note 3 URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 13 of 24
705B 306B314B31B 278B286B283B280B29B721B46B43B40B5. INSPECTION CRITERIA 279BH287B284281B30B434B45.1 Acceptable Quality Level 280B28B285B282BEach lot should satisfy the quality level defined as follows 281B289B286B283BPARTITION 282B290B287B284BAQL 283B291B28B285BDEFINITION 284B292B289B286BA. Major 285B293B290B287B0.4% 286B294B291B28BFunctional defective as product 287B295B292B289B. Minor 28B296B293B290B1.5% 289B297B294B291BSatisfy all functions as product but not satisfy cosmetic standard 290B298B295B292B712B439B436B43B5.2 Definition of Lot 291B29B296B293BOne lot means the delivery quantity to customer at one time. 292B5.3 Condition of Cosmetic Inspection 293B301B298B295B INSPECTION AND TEST 294B302B29B296B-FUNCTION TEST 295B303B30B297B-APPEARANCE INSPECTION 296B304B301B298B-PACKING SPECIFICTION 297B305B302B29B INSPECTION 30B308B305B302B AQL CONDITION 298B306B303B30B- Put 29B307B304B301B- Tilt under the lamp (20W) at a distance 100mm from upright 45 degree by the front (back) to inspect LCD appearance. INSPECTION LEVEL 301B309B306B303B- SAMPLING 302B310B307B304B- SAMPLING 303B31B308B305B- MAJOR 304B312B309B306B- MINOR 305B313B310B307B- GENERAL METHOD: MIL-STD-105D PLAN: SINGLE DEFECT: 0.4% (MAJOR) DEFECT: 1.5% (MINOR) LEVEL: II/NORMAL URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 14 of 24
349B 351B 352B 353B 354B 35B 356B 357B 365B 367B 372B 375B 71B307B438B315B435B312B432B309B5.4 Module Cosmetic Criteria 308BNO. 309BItem 312B1 313BDifference 316B2 317BPattern 320B3 328B4 329BResist 32B5 39B6 340BStain 343B7 34BPlate 347B8 310BJudgment Criterion 31BPartition in Spec. 314BNone allowed 315BMajor Peeling 318BNo substrate pattern peeling and floating 319BMajor 321BSoldering defects 32BNo soldering missing 323BMajor 324BNo soldering bridge 325BMajor 326BNo cold soldering 327BMinor flaw on substrate 30BInvisible copper foil( 0.5mm or more)on substrate pattern 31BMinor 3BAccretion of metallic 35BNo soldering dust 36BMinor 38B 34BForeign matter 750B37BNo accretion of metallic foreign matters(not exceed 0.2mm) 341BNo stain to spoil cosmetic badly 342BMinor discoloring 345BNo plate fading,rusting and discoloring 346BMinor 348BSolder amount 358Ba. Soldering side of PCB 368BMinor 350B1.Lead parts 359BSolder to form a Filet 360Ball around the lead. 361BSolder should not hide the 362Blead form perfectly.(too much) 363Bb.Components side 364B(In case of Through Hole PCB ) 36BSolder to reach the Components side of PCB 369B2.Flat packages 370BEither toe (A) or heal (B) of 371Bthe lead to be covered by Filet. A B 376BMinor 373BLead form to be assume over 374BSolder. 37B3.Chips 378B(3/2) H h (1/2)H 379BMinor h H URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 15 of 24
407B 391B 419B 387B 40B 401B 415B 416B 417B 418B 380B9 381Backlight defects 382B1.Light fails or flickers.(major) 383B2. Color and luminance do not correspond to specifications. 38BSee 384B(Major) 385B3.Exceeds standards for display s blemishes, foreign matter, 386Bdark lines or scratches.(minor) 389Blist 751B390B 392B10 393BPCB defects 394BOxidation or contamination on connectors.* 395B2. Wrong parts, missing parts, or parts not in specification.* 396B3.Jumpers set incorrectly.(minor) 397B4.Solder(if any)on bezel,led pad,zebra pad,or screw hole 398Bpad is not smooth.(minor) 39B*Minor if display functions correctly.major if the display fails. 402BSee 403Blist 404B 405B11 406BSoldering defects 408B1. Unmelted solder paste. 409B2. Cold solder joints,missing solder connections,or oxidation.* 410B3. Solder bridges causing short circuits.* 41B4. Residue or solder balls. 412B5. Solder flux is black or brown. 413B*Minor if display functions correctly.major if the display fails. 414BMinor URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 16 of 24
434B 435B 436B 437B 438B 439B 46B 47B 41B 42B 43B 4B 45B 46B 464B 468B 479B 47B 49B 450B 451B 452B 453B 471B 483B 420B5.5 Screen Cosmetic Criteria (Non-Operating) 421BNo. 42BDefect 423BJudgment Criterion 424BPartition 425B1 426BSpots 427BIn accordance with Screen Cosmetic Criteria (Operating) No.1. 428BMinor 429B2 430BLines 431BIn accordance with Screen Cosmetic Criteria (Operation) No.2. 432BMinor 43B3 40Bubbles in 48BMinor Polarizer 454BSize: d mm 45BAcceptable Qty in active area 456Bd 0.3 460BDisregard 457B0.3<d 1.0 461B3 458B1.0<d 1.5 462B1 459B1.5<d 463B0 465B4 472B5 473BAllowable 476B6 484B7 485BContamination 467BScratch 469BIn accordance with spots and lines operating cosmetic criteria, When the 470BMinor light reflects on the panel surface, the scratches are not to be remarkable. density 474BAbove defects should be separated more than 30mm each other. 475BMinor 478BColoration 486BNot 480BNot to be noticeable coloration in the viewing area of the LCD panels. 482BMinor 481Back-lit type should be judged with back-lit on state only. to be noticeable. 487BMinor URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 17 of 24
48B5.6 Screen Cosmetic Criteria (Operating) 489BNo. 490BDefect 493B1 491BJudgment Criterion 492BPartition 494BSpots 495BA) Clear 496BMinor 497BSize:d mm 49Bd 0.1 50B0.1<d 0.2 501B0.2<d 0.3 502B0.3<d 498BAcceptable Qty in active area 503BDisregard 507BNote: Including pin holes and defective dots which must be within one pixel 508BSize. B) 509BUnclear 504B6 505B2 506B0 510BSize:d mm 512Bd 0.2 513B0.2<d 0.5 514B0.5<d 0.7 515B0.7<d 51BAcceptable Qty in active area 516BDisregard 517B6 518B2 519B0 520B2 521BLines 52BA) Clear 528BMinor L 5.0 (0) 8 2.0 (6) See No.1 0.02 0.05 0.1 W 523BNote: () Acceptable Qty in active area 527B) Unclear 524BL - 525BW -Width(mm) Length (mm) 526B -Disregard L 10.0 (0) 8 (6) 2.0 0.05 0.3 0.5 See No.1 W 529B Clear = The shade and size are not changed by Vo. 530B Unclear = The shade and size are changed by Vo. URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 18 of 24
748B 749B 57B 58B 59B 531BNo. 532BDefect 53BJudgment Criterion 534BPartition 535B3 536BRubbing 539B4 540BAllowable 543B5 54BRainbow line 537BNot 538B to be noticeable. density 541BAbove defects should be separated more than 10mm each other. 542BMinor 545BNot 547B6 548BDot size 549BTo 53B7 54Brightness 5B(only back-lit 56BModule) to be noticeable. 546BMinor be 95%~105%of the dot size (Typ.) in drawing. 52BMinor 50BPartial defects of each dot (ex.pin-hole) should be treated as spot. 51B(see Screen Cosmetic Criteria (Operating) No.1) 560Brightness Uniformity must be BMAX/BMIN 2 565BMinor 561B- BMAX 562B- BMIN :Max.value by measure in 5 points : Min.value by measure in 5 points 563BDivide active area into 4 vertically and horizontally. 564BMeasure 5 points shown in the following figure. 56B8 567BContrast Uniformity 568BContrast Uniformity must be BmAX/BMIN 2 569BMeasure 5 points shown in the following figure. 570BDashed lines divide active area into 4 vertically and horizontally. 571BMeasuring points are located at the inter-sections of dashed line. 575BMinor 572BNote: BMAX Max.value by measure in 5 points. 573BMIN Min.value by measure in 5 points. 574BO Measuring points in 10mm. 576BNote: 57B(1) Size : d=(long length + short length)/2 578B(2) 579B(3) The limit samples for each item have priority. Complexed defects are defined item by item, but if the number of defects is defined in above table, the total number should not exceed 10. 580B(4) In case of concentration, even the spots or the lines of disregarded size should not be allowed. Following three situations 581BShould be treated as concentration. 582B-7 or 583B-10 or over defects in circle of 5mm. over defects in circle of 10mm URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 19 of 24
585B319B316B313B45B747B465B462B459B H 743B603B 584B-20 or over defects in circle of 20mm 6. PRECAUTIONS FOR USING H320B317B314B31B719B45B42B438B6.1 Handling 586B321B318B315B This 587B32B319B316B 58B323B320B317B If 589B324B321B318B Do 590B325B32B319B The 591B326B323B320B If 592B327B324B321B Solvents 593B328B325B32B Exercise 594B329B326B323B Install 595B30B327B324B Do 596B31B328B325B NC 597B32B329B326B If 598B3B30B327B To Precautions device is susceptible to Electro-Static Discharge (ESD) damage. Observe Anti-Static precautions. display panel is made of glass. Do not subject it to a mechanical shock by dropping it or impact. display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in your mouth. If the substance contacts your skin or clothes, wash it off using soap and water. not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. polarizer covering the display surface of the LCD module is soft and easily scratched. Handle this polarizer carefully. display surface becomes contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If it is heavily contaminated, moisten cloth with one of the following Isopropyl or alcohol. other than those above-mentioned may damage the polarizer. Especially, do not use the Water. care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water droplets, moisture condensation or a current flow in a high-humidity environment. the LCD Module by using the mounting holes. When mounting the LCD module make sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the cable or the backlight cable. not attempt to disassemble or process LCD module. terminal should be open. Do not connect anything. the logic circuit power is off, do not apply the input signals. prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment. 59B34B31B328B-Be sure 60B35B32B329B-Tools required 601B36B3B30B-To reduce to ground the body when handling LCD modules. for assembling, such as soldering irons, must be properly grounded. the amount of static electricity generated, do not conduct assembling and other work under dry conditions. 602B37B34B31B-The LCD module is coated with a film to protect the display surface. Exercise care when peeling off this protective film since static electricity may be generated. URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 20 of 24
608B43B340B37B43B 735B609B455B344B452B341B449B338B 754B624B468B358B465B35B462B352B 739B629B458B362B45B359B452B356B 6.2 Power Supply Precautions 604B338B335B332B42B461B458B455B339B336B333B Identify and, at all times, observe absolute maximum ratings for both logic and LC drivers. Note that there is some variance between models. 605B340B37B34B Prevent the application of reverse polarity to VDD and VSS, however briefly. 606B341B38B35B Use a clean power source free from transients. Power-up conditions are occasionally jolting and may exceed the maximum ratings of modules. 607B342B39B36B The VDD power of module should also supply the power to all devices that may access the display. Don t allow the data bus to be driven when the logic supply to the module is turned off. 610B6.3 Operating Precautions 611B345B342B339B DO 612B346B343B340B Minimize 613B347B34B341B For 614B348B345B342B Operate NOT plug or unplug module when the system is powered up. the cable length between module and host MPU. models with backlights, do not disable the backlight by interrupting the HV line. Unload inverters produce voltage extremes that may arc within a cable or at the display. module within the limits of the modules temperature specifications. 615B349B346B343B44B730B452B449B446B 6.4 Mechanical/Environmental Precautions 616B350B347B34B Improper 618B352B349B346B Mount 619B353B350B347B Surface 620B354B351B348B Always 621B35B352B349B Prevent 62B356B353B350B Do 623B357B354B351B If soldering is the major cause of module difficulty. Use of flux cleaner is not recommended 617B351B348B345Bas they may seep under the electrometric connection and cause display failure. module so that it is free from torque and mechanical stress. of the LCD panel should not be touched or scratched. The display front surface is an easily scratched, plastic polarizer. Avoid contact and clean only when necessary with soft, absorbent cotton dampened with petroleum benzene. employ anti-static procedure while handling module. moisture build-up upon the module and observe the environmental constraints for storage tem not store in direct sunlight leakage of the liquid crystal material should occur, avoid contact with this material, particularly ingestion. If the body or clothing becomes contaminated by the liquid crystal material, wash thoroughly with water and soap 625B6.5 Storage Precautions 626B359B356B353B When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps. 627B360B357B354BKeep 628B361B358B35BWhenever possible, modules in bags (avoid high temperature / high humidity and low temperatures below 0C LCD modules should be stored in the same conditions in which they were shipped from our company. 630B6.6 Others 631B363B360B357B Liquid crystals solidify under low temperature (below the storage temperature range) leading to defective orientation or the generation of air bubbles (black or white). Air bubbles may also be generated if the module is subject to a low temperature. URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 21 of 24
757B636B69B368B46B365B463B 362B H 632B364B361B358BIf LCD modules have been operating for a long time showing the same display patterns, the display patterns may remain on the screen as ghost images and a slight contrast irregularity may also appear. A normal operating status can be regained by suspending use for some time. It should be noted that this phenomenon does not adversely affect performance reliability. 63B365B362B359BTo minimize the performance degradation of the LCD modules resulting from destruction caused by static electricity etc., exercise care to avoid holding the following sections when handling the modules. 634B36B363B360B-Exposed area 635B367B364B361B-Terminal electrode of the printed circuit board. sections. 637B7. USING LCD MODULES H 638B369B36B363B31B727B450B47B4B7.1 Liquid 640B371B368B365B Please 641B372B369B36B Do 642B373B370B367B N-hexane 643B374B371B368B When 64B375B372B369B Wipe 646B37B374B371B Avoid 647B378B375B372B Condensation 648B379B376B373B Do 649B380B37B374B Do 651B382B379B376B As Crystal Display Modules 639B370B367B364B LCD is composed of glass and polarizer. Pay attention to the following items when handling. keep the temperature within specified range for use and storage. Polarization degradation, bubble generation or polarizer peel-off may occur with high temperature and high humidity. not touch, push or rub the exposed polarizers with anything harder than an HB pencil lead (glass, tweezers, etc.). is recommended for cleaning the adhesives used to attach front/rear polarizers and reflectors made of organic substances which will be damaged by chemicals such as acetone, toluene, ethanol and isopropylalcohol. display surface becomes dusty, wipe gently with absorbent cotton or other soft material like chamois soaked in petroleum benzin. Do not scrub hard to avoid damaging the display surface. off saliva or water drops immediately, contact with water over a long period of time may cause 645B376B373B370Bdeformation or color fading. contacting oil and fats. on the surface and contact with terminals due to cold will damage, stain or dirty the polarizers. After products are tested at low temperature they must be warmed up in a container before coming is contacting with room temperature air. not put or attach anything on display area to avoid leaving marks on. not touch the display with bare hands. This will stain the display area and degradate insulation 650B381B378B375Bbetween terminals (some cosmetics are determinated to the polarizers). glass is fragile. It tends to become or chipped during handling especially on the edges. Please 652B383B380B37Bavoid dropping or jarring. 72B653B7.2 Installing 654B384B381B378B42B47B4B41B385B382B379B Cover LCD Modules the surface with a transparent protective plate to protect the polarizer and LC cell. 65B386B383B380B When assembling 656B387B384B381Bplate should the LCM into other equipment, the spacer to the bit between the LCM and the fitting have enough height to avoid causing stress to the module surface, refer to the individual specifications for measurements. The measurement tolerance should be±0.1mm. URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 22 of 24
745B682B 681B463B412B460B409B457B406B 74B657B7.3 Precaution 659B390B387B384B Do 60B391B38B385B Do 61B392B389B386B Do 62B393B390B387B Absolutely 63B394B391B38B Except 64B395B392B389B Do for Handling LCD Modules 658B389B386B383BSince LCM has been assembled and adjusted with a high degree of precision; avoid applying excessive shocks to the module or making any alterations or modifications to it. not alter, modify or change the shape of the tab on the metal frame. not make extra holes on the printed circuit board, modify its shape or change the positions of components to be attached. not damage or modify the pattern writing on the printed circuit board. do not modify the zebra rubber strip (conductive rubber) or heat seal connector. for soldering the interface, do not make any alterations or modifications with a soldering iron. not drop, bend or twist LCM. 717B65B7.4 Electro-Static Discharge Control 67B398B395B392B Make 68B39B396B393B Before 69B40B397B394B When 670B401B398B395B When 671B402B39B396B As 672B403B40B397B To 6B397B394B391BSince this module uses a CMOS LSI, the same careful attention should be paid to electrostatic discharge as for an ordinary CMOS IC. certain that you are grounded when handing LCM. remove LCM from its packing case or incorporating it into a set, be sure the module and your body have the same electric potential. soldering the terminal of LCM, make certain the AC power source for the soldering iron does not leak. using an electric screwdriver to attach LCM, the screwdriver should be of ground potentiality to minimize as much as possible any transmission of electromagnetic waves produced sparks coming from the commutator of the motor. far as possible make the electric potential of your work clothes and that of the work bench the ground potential. reduce the generation of static electricity be careful that the air in the work is not too dried. A relative humidity of 50%-60% is recommended. 746B673B7.5 Precaution 674B464B404B461B401B458B398B405B402B39B Observe 679B410B407B404B When 680B41B408B405B When for Soldering to LCM the following when soldering lead wire, connector cable and etc. to the LCM. 675B406B403B40B-Soldering iron 676B407B404B401B-Soldering time: 67B408B405B402B-Solder: eutectic 678B409B406B403BIf soldering temperature : 280 ±10 3-4 sec. solder. flux is used, be sure to remove any remaining flux after finishing to soldering operation. (This does not apply in the case of a non-halogen type of flux.) It is recommended that you protect the LCD surface with a cover during soldering to prevent any damage due to flux spatters. soldering the electroluminescent panel and PC board, the panel and board should not be detached more than three times. This maximum number is determined by the temperature and time conditions mentioned above, though there may be some variance depending on the temperature of the soldering iron. remove the electroluminescent panel from the PC board, be sure the solder has completely melted, the soldered pad on the PC board could be damaged. URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 23 of 24
690B49B419B46B416B43B413B 753B691B 702B431B428B425B 7.6 Precaution for Operation 683B413B410B407B Viewing 684B414B41B408B Driving 685B415B412B409B Response 686B416B413B410B If 687B417B414B41B Condensation 68B418B415B412B When angle varies with the change of liquid crystal driving voltage (VO). Adjust VO to show the best contrast. the LCD in the voltage above the limit shortens its life. time is greatly delayed at temperature below the operating temperature range. However, this does not mean the LCD will be out of the order. It will recover when it returns to the specified temperature range. display area is pushed hard during operation, the display will become abnormal. However, it will return to normal if it is turned off and then back on. on terminals can cause an electrochemical reaction disrupting the terminal circuit. Therefore, it must be used under the relative condition of 40, 50% RH. turning the power on, input each signal after the positive/negative voltage becomes stable. 726B689B7.7 Limited Warranty 420B417B414BUnless agreed between and customer, will replace or repair any of its LCD modules which are found to be functionally defective when inspected in accordance with LCD acceptance standards (copies available upon request) for a period of one year from date of shipments. Cosmetic/visual defects must be returned to within 90 days of shipment. Confirmation of such date shall be based on freight documents. The warranty liability of limited to repair and/or replacement on the terms set forth above. will not be responsible for any subsequent or consequential events. 7.8 Return Policy 70B430B427B424B. 692B42B419B416BNo warranty can be granted if the precautions stated above have been disregarded. The typical examples of violations are: 693B423B420B417B-Broken LCD 694B424B421B418B-PCB eyelet 695B425B42B419B-PCB conductors 696B426B423B420B-Circuit modified 697B427B424B421B-PCB tampered 698B428B425B42B-Soldering to 69B429B426B423BModule repairs glass. damaged or modified. damaged. in any way, including addition of components. with by grinding, engraving or painting varnish. or modifying the bezel in any manner. will be invoiced to the customer upon mutual agreement. Modules must be returned with sufficient description of the failures or defects. Any connectors or cable installed by the customer must be removed completely without damaging the PCB eyelet s, conductors and terminals 701B That s the end of the datasheet URL: www. Document Name: ER-TFTV070-3 Datasheet-Rev1.0 Page: 24 of 24