Marathon TT&R Glove Selection Guide

502.774.6541 - custserv@orrcorp.com www.orrsafety.com

Marathon TT&R Glove Selection Guide Matrix Glove Style Page # General Purpose Chemical/ Immersion Chemical/ Splash Cut Cut and Puncture Cut and Chemical Cold Weather Impact Resistant Electrical/ Arc Flash Drivers/ Asphalt Ansell Hyflex 3 X Orr Brand Mechanics 3 X Mechanix M-Pact 4 X Gripster Sports Plus 4 X X Ansell Alphatec 5 X Black Lightning Disposable Nitrile Orr Brand 8 Mil Disposable Nitrile ANSI 5 Kevlar/Steel Cut Resistant with Nitrile Coated Palm Chrome Series 360 Mecanics HexArmor Mechanics+ Green Nitrile with Kevlar Liner 5 X 6 X 7 X 7 X 8 X X 8 X X Ultra Tech Cut/Splash 8 X X Ansell ThermaKnit Insulator Ansell Winter Monkey Grip Orr Brand Mechanics - Insulated/Waterproof 9 X 9 X X X 10 X X KONG Glove 11 X X X Electrical/ARC Flash 12 X Special Purpose 13-15 X 2 Place orders through Orr Safety Catalog on e-procurement, or call: 502.774.6541 or email: custserv@orrcorp.com

GENERAL PURPOSE USES Climbing tanks, Floor sweeping, valve turning, tool carrying, taking out the trash, or any other normal everyday task. Ansell HyFlex Palm coated nitrile glove with patented Ansell Grip Technology on fine gauge liner. Good for handling small parts, oil grip & dry grip. EDM119206 Size 6 $2.93/pair EDM119207 Size 7 $2.93/pair EDM119208 Size 8 $2.93/pair EDM119209 Size 9 $2.93/pair EDM1192010 Size 10 $2.93/pair EDM1192011 Size 11 $2.93/pair Orr Brand Mechanics Mechanics Glove with Armor Skin Synthetic Leather. More abrasion resistant than same thickness of cowhide or pigskin. Pre-curved fingers for comfort and dexterity. Velcro closure to keep out debris. Neoprene knuckle to absorb shocks, breathable knit back, washable. ORRFJ200BKS Small, Black $6.95/pair ORRFJ200BKM Medium, Black $6.95/pair ORRFJ200BKL Large, Black $6.95/pair ORRFJ200BKXL X-Large, Black $6.95/pair ORRFJ200BK2XL 2X-Large, Black $6.95/pair HI-VISIBILITY O ORRFJ200HVOS Small, Hi-Vis Orange $6.95/pair ORRFJ200HVOM Medium, Hi-Vis Orange $6.95/pair ORRFJ200HVOL Large, Hi-Vis Orange $6.95/pair ORRFJ200HVOXL X-Large, Hi-Vis Orange $6.95/pair ORRFJ200HVO2XL 2X-Large, Hi-Vis Orange $6.95/pair ORRFJ200YWHVS Small, Hi-Vis Yellow $6.95/pair ORRFJ200YWHVM Medium, Hi-Vis Yellow $6.95/pair ORRFJ200YWHVL Large, Hi-Vis Yellow $6.95/pair ORRFJ200YWHVXL X-Large, Hi-Vis Yellow $6.95/pair ORRFJ200YWHV2X 2X-Large, Hi-Vis Yellow $6.95/pair 3 2014 - Marathon TT&R Glove Selection Guide

GENERAL PURPOSE USES Climbing tanks, Floor sweeping, valve turning, tool carrying, taking out the trash, or any other normal everyday task. Mechanix M-Pact Mechanics glove with rubberized grip on thumb, index finger and palm. Sonic welded molded rubber on knuckles and fingertips. Poron XRD foam underneath palm to absorb shock and vibration associated with repetitive tasks. Double stitching and dual panels in critical wear areas. Trek Dry spandex top and hook and loop closure for a secure fit. MXWMPT58008 Small $24.33/pair MXWMPT58009 Medium $24.33/pair MXWMPT58010 Large $24.33/pair MXWMPT58011 X-Large $24.33/pair MXWMPT58012 XX-Large $24.33/pair Gripster Sports Plus Cut Resistant Mechanics Mechanics Style Glove with Arelene fibers for high 360 degree cut resistance. Velcro closure, high vis orange back with 3M reflective. Polyurethane reinforced palm for grip and silicone dot fingertips. Excellent dexterity and cut protection. ANSI Cut Level 4. GGSSG8800KEVM Medium $ 13.42/pair GGSSG8800KEVL Large $ 13.42/pair GGSSG8800KEVXL X-Large $ 13.42/pair 4 Place orders through Orr Safety Catalog on e-procurement, or call: 502.774.6541 or email: custserv@orrcorp.com

CHEMICAL RESISTANT - IMMERSION USES Parts cleaning machines, parts cleaning buckets (garages), Asphalt strainer basket cleaning and other tasks where you immerse your hands in chemcials Ansell AlphaTEC 12 Supported nitrile glove with patented Ansell Grip Technology. A nitrile layer filled with microscopic channels that transfer oils and lubricants away from griping surface. Consistent polymer coating significantly reduces the likelihood of chemical leakage. Unique combination of grip, chemical resistance and superior comfort, tactility and dexterity. EDM585308 Size 8 $4.72/pair EDM585309 Size 9 $4.72/pair EDM5853010 Size 10 $4.72/pair EDM5853011 Size 11 $4.72/pair Black Lightning Disposable Nitrile Powder Free 9-1/2 Disposable Powder Free Black Nitrile, Latex Free, Textured Grip, Ambidextrous. Unique formulation reduces excess perspiration. Quadruple washed, no excess chemicals lingering on the glove. Super strength and stretch no more tearing. Box of 100. ATPBLS Size Small $12.87/box ATPBLM Size Medium $12.87/box ATPBLL Size Large $12.87/box ATPBLXL Size X-Large $12.87/box ATPBLXXL Size XX-Large $12.87/box 5 2014 - Marathon TT&R Glove Selection Guide

CHEMICAL RESISTANT - SPLASH USES Taking samples, working in testing rooms, performing drain down, and other task that could have potential chemical splashing hazards. Orr Brand 8 Mil Disposable Nitrile Gloves 9-1/2 Disposable 8 mil Blue Nitrile, latex free, smooth fingertips, ambidextrous. 8 mil thickness offers wearer increased barrier and puncture protection over 4 mil disposable nitrile gloves, while still offering tactility and dexterity. Available lightly powdered for easier donning and doffing, or powder free. Box of 50. Powder Free ORRFF11008PFS Size Small $6.34/box ORRFF11008PFM Size Medium $6.34/box ORRFF11008PFL Size Large $6.34/box ORRFF11008PFXL Size X-Large $6.34/box ORRFF11008PFXXL Size XX-Large $6.34/box Lightly Powdered ORRFF11008S Size Small $5.99/box ORRFF11008M Size Medium $5.99/box ORRFF11008L Size Large $5.99/box ORRFF11008XL Size X-Large $5.99/box 6 Place orders through Orr Safety Catalog on e-procurement, or call: 502.774.6541 or email: custserv@orrcorp.com

CUT RESISTANT USES Working with any metal or signage: Garages/Operations, tossing scrap in dumpsters, cutting (making) gaskets, changing tool blades or cutting wheels, or any other tasks that could have a potential cut hazard. ANSI 5 Kevlar/Steel Cut Resistant with Nitrile Coated Palm 10 Gauge Kevlar/Steel Cut Resistant Glove with Extended Cuff. Microfoam Nitrile Palm Coat for excellent grip and abrasion resistance. High Level of Dexterity. ANSI Cut Level 5 WCM710KSSNS Small $ 7.74/Pair WCM710KSSNM Medium $ 7.74/Pair WCM710KSSNL Large $ 7.74/Pair WCM710KSSNXL X-Large $ 7.74/Pair HexArmor Chrome Series 360* Mechanics SuperFabric brand material provides 360* cut resistance. 20 times more cut resistant then leather gloves. Oil resistant synthetic leather palm with PVC print enhances grip in dry and light oil applications while providing dexterity. Cut and abrasion resistant knuckle patch. Elastic Cuff with Velcro closure for a secure fit. Launderable. ANSI Cut Level 5 PFF4023S Small $ 26.88/pair PFF4023M Medium $ 26.88/pair PFF4023L Large $ 26.88/pair PFF4023XL X-Large $ 26.88/pair PFF4023XXL 2X-Large $ 26.88/pair HexArmor Chrome Series 360* Mechanics - Impact Protection SuperFabric brand material provides 360* cut resistance. 20 times more cut resistant then leather gloves. Oil resistant synthetic leather palm with PVC print enhances grip in dry and light oil applications while providing dexterity. Back of the hand impact protection to dissipate forceful blows over a large area. Padded palm reduces vibration damage while returning a higher level of comfort. Elastic cuff with Velcro closure for a secure fit. Launderable. ANSI Cut Level 5 PFF4025S Small $ 36.21/Pair PFF4025M Medium $ 36.21/Pair PFF4025L Large $ 36.21/Pair PFF4025XL X-Large $ 36.21/Pair PFF4025XXL 2X-Large $ 36.21/Pair 7 2014 - Marathon TT&R Glove Selection Guide

CUT & PUNCTURE RESISTANT USES-Handling steel cables and dock lines, hose handling (asphalt rail lines with braided hoses), changing out riser hoses at LP load racks, repairing loading hoses, and any other task that could have a cut and puncture hazard. HexArmor Mechanics+ Mechanics style glove with synthetic leather palm that enhances grip in dry and light oil applications, while providing dexterity to utilize tools and equipment. SuperFabric brand material for the highest level of cut resistance, Level 5. Puncture protection from wires, metal, wood and glass on the palm, thumb and knuckle area. Washable. PFF4018S Size Small $28.82/pair PFF4018M Size Medium $28.82/pair PFF4018L Size Large $28.82/pair PFF4018XL Size X-Large $28.82/pair PFF4018XXL Size XX-Large $28.82/pair CUT & CHEMICAL RESISTANT USES Tank gauging, working on additive lines, valves, or solenoids at the rack, and any other task that could have cut and chemical hazards. Green Nitrile with Kevlar Liner 13 Unsupported Green Nitrile for chemical and protection with Kevlar liner for cut protection. Raised diamond pattern for extra grip. ANSI cut level 2. For chemical immersion and cut resistance. GGS515KEVM Size Medium $5.77/pair GGS515KEVL Size Large $5.77/pair GGS515KEVXL Size X-Large $5.77/pair UltraTech Cut/Splash Red Nitrile fully coated on seamless synthetic fiber/fiberglass 10 gauge shell. ANSI Cut Level 3. For chemical splash and cut resistance. MEM9683CSS Size Small $64.39/dozen MEM9683CSM Size Medium $64.39/dozen MEM9683CSL Size Large $64.39/dozen MEM9683CSXL Size X-Large $64.39/dozen MEM9683CSXXL Size XX-Large $64.39/dozen 8 Place orders through Orr Safety Catalog on e-procurement, or call: 502.774.6541 or email: custserv@orrcorp.com

COLD WEATHER USES Snow removal task, river task, transport task, or any other general purpose task that is performed in cold weather. Ansell ThermaKnit Insulator Insulator glove to use as a liner for protection in cold temperatures. To be worn under primary glove. EDM78101PR Thermal Knit Insulator $2.34/pair Ansell Winter Monkey Grip PVC coated glove with foam insulation for cold temperatures and wet conditions. Curved fingers, wing thumb and jersey liner for comfort. PVC stays soft even when cold. Available smooth grip with safety cuff, rough grip with safety cuff and smooth grip fully coated 12. Size 10 only. Good for drivers and those handling petroleum based materials in cold conditions or mild heat conditions. EDM2319310 Smooth Grip with Safety Cuff $ 7.09/Pair EDM2317310 Rough Grip with Safety Cuff $ 7.66/Pair EDM2315210 Smooth Grip Fully Coated 12 $ 9.57/Pair 9 2014 - Marathon TT&R Glove Selection Guide

COLD WEATHER USES Snow removal task, river task, transport task, or any other general purpose task that is performed in cold weather. Orr Brand Mechanics - Insulated and Waterproof Mechanics Glove with Armor Skin synthetic leather. More abrasion resistant than same thickness of cowhide or pigskin. Pre-curved fingers for comfort and dexterity. Velcro closure to keep out debris. Neoprene knuckle to absorb shocks. PVC patches on fingertips and thumb. PVC palm patch with double break points to prevent bunching of the glove in the palm area. PVC palm patches are lined with neoprene padding for impact reduction. Triple sewn in high wear/stress areas. PVC slip resistant tool grip on the work area of the index finger, Neoprene knuckle to absorb shocks, washable. Heatlok Lined AND Waterproof ORRFJ210WPBKS Size Small $14.45/pair ORRFJ210WPBKM Size Medium $14.45/pair ORRFJ210WPBKL Size Large $14.45/pair ORRFJ210WPBKXL Size X-Large $14.45/pair ORRFJ210WPBK2X Size 2X-Large $14.45/pair 10 Place orders through Orr Safety Catalog on e-procurement, or call: 502.774.6541 or email: custserv@orrcorp.com

IMPACT RESISTANT USES Garage work, rail car hatch opening, handling heavy parts or pipe, use of hand tools in tight areas, or any other tasks that could involve impact to the hand. KONG Glove Reduces if not eliminates hairline fractures, bruising blows and pinched fingers caused by impact. Offers back of hand, knuckle, finger and thumb protection with impact absorbing Thermoplastic Rubber. Machine Washable. Available in Original with high degree of dexterity, Super Dexterity with single layer palm with silicone grip and improved dexterity, or Cold Weather with 100% waterproof and windproof breathable membrane and comfortable inner lining that keeps hands warm down to 20 degrees F. Original IPWSDX02S Size Small $27.71/pair IPWSDX03M Size Medium $27.71/pair IPWSDX04L Size Large $27.71/pair IPWSDX05XL Size X-Large $27.71/pair IPWSDX06XXL Size XX-Large $27.71/pair IPWSDX07XXXL Size XXX-Large $27.71/pair Super Dexterity IPWSDXG02S Size Small $26.92/pair IPWSDXG03M Size Medium $26.92/pair IPWSDXG04L Size Large $26.92/pair IPWSDXG05XL Size X-Large $26.92/pair IPWSDXG06XXL Size XX-Large $26.92/pair Cold Weather IPWSDXW03M Size Medium $38.47/pair IPWSDXW04L Size Large $38.47/pair IPWSDXW05XL Size X-Large $38.47/pair IPWSDXW06XXL Size XX-Large $38.47/pair NEW - Cut Resistant Kong is ANSI Cut Level 4 IPWSDXC02S Size Small $0.00/pair IPWSDXC03M Size Medium $0.00/pair IPWSDXC04L Size Large $0.00/pair IPWSDXC05XL Size X-Large $0.00/pair IPWSDXC06XXL XX-Large $0.00/pair IPWSDXC06XXL XX-Large $0.00/pair 11 2014 - Marathon TT&R Glove Selection Guide

ELECTRICAL/ARC FLASH USES Testing electrical equipment, verification of power, or any other task that presents an electrical/arc Flash hazard. ELECTRICAL GLOVES Class 00 11 Length Max Use Voltage 500V AC/750V DC Class 00 Glove Kit Kit contains 1 pr. Class 00 11 Black Electrical Gloves, 1 pr. Goatskin Glove Protectors and 1 ea. Nylon Glove Bag PIP150SK008 Size 8 $63.87/each PIP150SK009 Size 9 $63.87/each PIP150SK0010 Size 10 $63.87/each PIP150SK0011 Size 11 $63.87/each PIP150SK0012 Size 12 $63.87/each Class 00 11 Black Electrical Gloves PIP15000118 Size 8 $40.93/pair PIP15000119 Size 9 $40.93/pair PIP150001110 Size 10 $40.93/pair PIP150001111 Size 11 $40.93/pair PIP150001112 Size 12 $40.93/pair Glove Protectors for 11 Class 00 Gloves PIP14810008 Size 8 $12.80/pair PIP14810009 Size 9 $12.80/pair PIP148100010 Size 10 $12.80/pair PIP148100011 Size 11 $12.80/pair PIP148100012 Size 12 $12.80/pair 12 Place orders through Orr Safety Catalog on e-procurement, or call: 502.774.6541 or email: custserv@orrcorp.com

SPECIAL PURPOSE - DRIVERS / ASPHALT USES See each glove for special use Ansell Winter Monkey Grip Uses Transport drivers and those handling petroleum based materials and hoses, collecting samples in asphalt or any other task that could involve the handling of cold or warm materials. PVC coated glove with foam insulation for cold temperatures and wet conditions. Curved fingers, wing thumb and jersey liner for comfort. PVC stays soft even when cold. Available smooth grip with safety cuff, rough grip with safety cuff and smooth grip fully coated 12. Size 10 only. Good for drivers and those handling petroleum based materials in cold conditions or mild heat conditions. EDM2319310 Smooth Grip with Safety Cuff $ 7.09/Pair EDM2317310 Rough Grip with Safety Cuff $ 7.66/Pair EDM2315210 Smooth Grip Fully Coated 12 $ 9.57/Pair ****Not intended for immersion in hot products**** 35 oz Zetex Plus Mitten or Glove Uses Handling testing room supplies and equipment that are extremely hot, up to 1800 degrees for short duration, or any other task that could involve the handling of extremely high temperature items. 35 oz. Zetex Plus treated Fiberglass double layer 14 glove or mitten. Moderate abrasion resistance. HOL174ZP 14 35 oz. Zetex Plus Mitten $28.50/Pair HOL234ZP 14 35 oz. Zetex Plus Glove $33.15/Pair 13 2014 - Marathon TT&R Glove Selection Guide

SPECIAL PURPOSE - DRIVERS / ASPHALT USES See each glove for special use Orr Brand Split Leather Drivers Gloves, Lined and Unlined Uses Cleaning around lines/valves/flanges, emptying sample buckets or any other task that could involve coming in contact with cooled asphalt/emulsion. Split cowhide drivers style glove with shirred wrist for snug fit. Unlined version is select pearl shoulder split leather with keystone thumb. Lined version is tan color split leather with straight thumb and white thermal lining. Unlined ORRFB505M Size Medium $ 20.92/Dozen ORRFB505L Size Large $ 20.92/Dozen ORRFB505XL Size X-Large $ 20.92/Dozen Lined ORRFB505LM Size Medium $ 38.72/Dozen ORRFB505LL Size Large $ 38.72/Dozen ORRFB505LXL Size X-Large $ 40.32/Dozen NOTE: Not for use in light products, Asphalt only. Orr Brand Hot Mill Glove Uses - Handling testing room samples or equipment that are hot, up to 250 degrees F, or any other task that could involve the handling of high temperature items. 24 oz. 100% cotton double layer nap out hot mill glove with band top cuff. Double layer offers comfort and good heat dispersion Orr Part # Description MarathonPrice ORRFI24BPR 24 oz. Hot Mill Glove with $ 1.71/Pr. Band Top Cuff, Mens 14 Place orders through Orr Safety Catalog on e-procurement, or call: 502.774.6541 or email: custserv@orrcorp.com

SPECIAL PURPOSE - DRIVERS / ASPHALT USES See each glove for special use Full Leather with Gauntlet Cuff Uses Cleaning heat traced lines/valves/flanges, or any other task were you could come into brief contact with heated lines or warm asphalt/emulsion. Select Shoulder Split Cowhide Full Leather Back Glove with 4-1/2 Rubberized Gauntlet Cuff. Cotton Lined Palm for extra comfort. PIP5066M Size Medium $ 2.28/Pair PIP5066L Size Large $ 2.28/Pair PIP5066XL Size X-Large $ 2.28/Pair NOTE: Not for use in light products, Asphalt only. NOTE: This is not an all inclusive list for drivers and asphalt, other gloves in this program could be applicable depending on the work task. 15 2014 - Marathon TT&R Glove Selection Guide

GLOVE ACCESSORIES Glove Guard Glove Clips Non-conductive - no metal parts to conduct electricity, rust or corrode. Break-away center - helps prevent individual from being pulled into machinery if gloves are caught. Improves hand safety by keeping gloves close at hand - ready to use when and where they are needed. Lightweight - only 3/4 oz. and moves freely out of the way in both standing and sitting positions. Engineered grade material - holds its memory with a tight grip that resists flex fatigue in all types of weather. Small end of Glove Guard - attaches to belt loop or directly to clothing, including one piece coverall suits. Large end - attaches to a variety of glove sizes and other articles such as utility bags, cloth sleeve protectors, mechanic towels, ear muffs, etc GFS1939BE Blue $3.60/each GFS1939BK Black $3.60/each GFS1939GN Green $3.60/each GFS1939YW Yellow $3.60/each Kevlar Sleeves 100% 2-Ply Kevlar Sleeves offer great cut, abrasion, and heat resistance. 3 Wide for snug and comfortable fit. ANSI Cut Level 3 ORRKS10TH 10 Length with Thumb Hole $ 1.54/Each ORRKS14TH 14 Length with Thumb Hole $ 1.84/Each ORRKS18TH 18 Length with Thumb Hole $ 2.33/Each ORRKS24 24 Length $ 2.83/Each 16 Place orders through Orr Safety Catalog on e-procurement, or call: 502.774.6541 or email: custserv@orrcorp.com

TT&R Glove Request Form This form allows TT&R employees the ability to request gloves that are currently not in the program. Please fill out the form completely and submit to Joseph Herbert jdherbert@marathonpetroleum.com or the current glove program owner. Attach any photos or additional information as needed. General Information: Requested by: Location (terminal/group): Glove Request Section: Manufacturer: Model #: Requested date: Phone Number: Product Name: Link to glove(if available): Style and or use: (circle all that apply) General purpose Chemical Immersion Chemical Splash Cut Cut & Puncture Cut & Chemical Cold Weather Impact Electrical/Arc Flash Drivers Asphalt Special Purpose Other Reason for request: (Please note the task you need the glove for, the glove you are currently using for the task, why this glove is a better choice, and any other important information. Attach any photos or additional information as needed. ) Glove Approval Section: Responses will be sent back to requester in a timely manner. Approved Denied Approver: Date: Reason approved or denied: 2014 17 2014 - Marathon TT&R Glove Selection Guide

NOTES 18 Place orders through Orr Safety Catalog on e-procurement, or call: 502.774.6541 or email: custserv@orrcorp.com

HOW TO ORDER 1. Orr Safety e-catalog on e-procurement 2. Contact Orr Safety Customer Service Contact Ginger Hines Fax: 800.800.6774 Phone: 502.774.5791 Email: custserv@orrcorp.com Need assistance with glove selection? Contact Orr Safety Account Manager Marla Hejma Phone: 513-910-9799 Email: marlah@orrcorp.com For guidance on glove use outside of this program please contact your local HES professional, all other suggestion or inquiries should be sent to Joseph Herbert. Prices are current as of 1/1/2014 and are subject to change. 19 2014 - Marathon TT&R Glove Selection Guide

502.774.6541 - custserv@orrcorp.com www.orrsafety.com