TECHNICAL CATALOGUE HANDLE FOR BALL VALVES

Similar documents
Manual Actuator. CR / CM Levers. Type Series Booklet

HANDLES HANDLES 084 MILLENIUM HANDLE 085 DRAWER HANDLE 184 DRAWER HANDLE 387 COVER HANDLE 087 COVER HANDLE 174 COVER PULL (SNAP-IN)

EDITION

Drinking water distribution and shut-off system for concealed installations.

E13.11 SPRING CATCHES E13 BOTTOM HUNG OPEN IN WINDOWS

Table and Furniture Base Fittings Furniture Feets

Glass Door Fittings Glass Door Accessories

FRAMELESS GLASS SLIDING FOLDING SYSTEM Sliding Folding System SPECIALISED SLIDING SYSTEMS

11 12 STORAGE 15 AND 15 ETS S

Railing & Wall Mount Storage Systems

BEV-TENT COMPONENTS. Made in South Africa

RTA flexible conduits

Emergency Stop Devices

Safety waste-paper baskets and ashtrays

Automatic hose reel type ST Our topseller the hose reel type ST is a very robust and reliable version with automatic spring rewind.

3/8 BORE MOUNTING BRACKETS

Accessories high-pressure cleaners:

4-wheeled container systems. The LARGE family

BEV-TENT COMPONENTS. Made in South Africa

2843 Centerport Circle, Pompano Beach, Florida USA Toll Free: Direct: Fax:

2-3-5 Valve Manifolds

WINDOW TECHNOLOGY ORDER CATALOG SECTION Casement & Awning Windows Hardware

Outdoor Furniture Catalogue

BEV-TENT COMPONENTS AGENTS. GAUTENG REB MARKETING-Nick Tel:- (011) Fax:- (011)

Trapped Key Transfer System SHGV SVM SVE

NORMACLAMP TORRO ASSEMBLY FIXTURE NORMACLAMP COBRA PNEUMATIC PLIERS NORMACLAMP FBS PNEUMATIC PLIERS TYPE S NORMACLAMP FBS PNEUMATIC PLIERS TYPE W

brand keyless security locks for Locker and Furniture

TB131. Gas Conversion Kits for NVx & VPC Heaters. Issue 1.0 May Applies to models: NVx & VPC

PN 3000 Series Fail Closed Pneumatic Actuators

Hardware. Padlocks Door Fittings Hanging & Storage General Hardware

Pallet Feet & Fittings SQUARE

S E L E C T I O N. Abdominal Crunch. User manual

HANDLES, LE VERS & CR ANKS

Available materials: Stainless steel AISI 304 (Application in wet areas). Stainless steel AISI 316 (Application in aggressive areas).

handle: black coted for 30 Telescope URA UTA passive cutting by spring action electrode in normal position inside the sheath

MINIPOL SYSTEM Hot moulded GRP

SAP-3 Series FC HOUSING - for PC/Angled-PC -

EDITION DECEMBER CATALOGUE LOCKS / INSERTS / CONSTRUCTIONS

Arsen FAN COIL HOSES WITH BRAIDING AND WITHOUT BRAIDING EN ISO PRODUCED AND TESTED ISO 9001:2008 OHSAS 18001

PARTS CATALOGUE 05/05/2011. (issue 6) DEALER

CORSO TELESCOPIC PATIO ENCLOSURES COMPLETE YOUR HOME...

AOP B Series Floating Ball Valves. Delivering dependability at an affordable price into upstream, general purpose valve applications

BARGE: GBL 3530 HULL No. JEFFBOAT

Two Piece Low Torque Kelly Valve

CONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9

With kind permission of:: Jansen AG, CH-Oberriet. For timber, PVC and aluminium windows and balcony-doors. Tilt&Slide hardware

STEEL ROLLERS. 1. FORMERS SUPPORTED ON BOTH SIDES Prevents twisting under heavy loading

HUNTCO SITE FURNISHINGS. Double Bike Locker Assembly Instructions HUNTCO SITE FURNISHINGS

HANING SUN STORM NEW ENERGY CO., LTD.

BENEFITS OF A MOBILE TOOL CART STATION

markilux 780 / 880 Remarkably compact yet strong conservatory awnings for small glass areas both on the interior and the exterior

SAP-3 Series FC HOUSING - for PC/Angled-PC -

Friction and knife shafts

Hammer, Discus, Shot Put, Javelin

2015/16 PROTECTING THE TOOLS OF YOUR LIVELIHOOD

Realhome LCL Lockers Specification

6. Textile Products. Cargo Restraint Nets. Please feel free to contact us for your projects!

HANDWHEELS.

Home Improvement Fittings Wardrobe Fittings

Professional Rod Kits

A new generation of Modular Stairs

EXPLODED VIEW Rev.000 del 21/12/2016 Pagina 1 di 23

special blocks 2:1 8:1 TWIN HALYARD BLOCKS

ECO D-410 Product information

Picture Article code Description Picture Article code Description RS-RL215B Roller Lock Lock for roller shutter Picture Article code Description Pictu

EXPLODED VIEW Rev.000 del 21/12/2016 Pagina 1 di 23

MODELS: 440 SM & 440 SMSS

The Lock People SERVING INDUSTRY SINCE 1971

Central Locking Bed Castors

THE PERFECT LOCK FOR YOU

MASTER LOCK MASTER LOCK

A11.15 HANDLES AND LOCKCASES A11 TURN-TILT WINDOWS

A new generation of Modular Stairs

Machine Knives Hardened and Ground Wear Parts

L11.13 HOOK LOCKS L11 SLIDING DOORS

WARRENTY Void IF BROKEN 48,0 COMBINATIONS FIXED CYLINDER A A A A M = MASTER KEY SYSTEM: SUPPLIED TO ORDER ONLY

Weld-on Nut. Protection Ring SW41 M27 23 FWZ Steel. Dia. A. Dia. B R10. Part-No.

SIZE RANGE: 1 TO 10. PRESSURE RANGE: FULL VACUUM TO 275 psi

TROLLEY-MOUNTED HOSE REELS

C11.15 HANDLES AND LOCKCASES C11 SIDE HUNG WINDOWS

TABLE & FURNITURE LEGS

UNI EN ISO 9001: 2008

PROFILE SYSTEM HANDLES, LOCKS, STOPS HANDLE, LOCKS, STOPS 108 MINITEC PROFILE SYSTEM

Work Station Cranes. Free Standing

MATERIAL HANDLING EQUIPMENT

For draining expansion tanks, other liquid storage vessels.

Titus Tekform Product Brochure. Tekform Handles by Titus

EXTERNAL DIMENSIONS. L Length Kg W Width Kg D Depth. W Width. D Depth. 0 Kg Lid lt Base EXTERNAL DIMENSIONS.

Prices: Gross (RRP), ex works, without tax. Valid from 01-Feb-2017

LEVER LOCKS. ASSA OEM AB Kungsgatan 71 Box 371 SE Eskilstuna Sweden Phone: +46 (0)

Automated Construction Equipment Panelization made simple for the 21 st Century

HANDLES LHF115, LHR115, LHPB VARIOUS. Base Model Handles. MATERIAL Steel. FINISH Chrome Plated LHR115-1A

CONTENTS. Specifications of all products mentioned are indicative only

The Shand & Jurs Model Pressure Relief Vent

LINDSTRAND BALLOONS LTD MAINTENANCE MANUAL SUPPLEMENT NO. 2

Safety Interlock Switches

MMSlog MULTIFUNCTIONAL TROLLEY

Farm Hardware. Farm Hardware. To order call: Fax:

Transom concealed door closer DORMA RTS 85

Quad-Lock Container System. sterilization solutions. Symmetry Surgical s Quad-Lock container. system is equipped with a patent-pending,

Transcription:

TECHNICAL CATALOGUE HANDLE FOR BALL VALVES

TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for plumbing and heating systems. Thanks to fully automated production processes, with 72 tooling machines and 51 assembly lines, we are able to produce 200,000 pieces per day. Our innate pursuit for innovation and observance of technical regulations is supported by the company certification ISO 9001: 2008. The company has always considered its focus on quality as the main tool to obtain significant business results: today ITAP SpA is proud to offer products bearing the approval of numerous international certifying bodies. THE COMPANY

HANDLE FOR BALL VALVES

TEC HANDLE FOR BALL VALVES HANDLE

086 LEVER HANDLE FOR BALL VALVES AND BIBCOCKS SIZE CODE PACKING 1 0860001/N/B 1/1000 2 0860002/N/B 1/800 3 0860003/N/B 1/500 4 0860004/N/B 1/300 5 0860005/N/B 1/200 6 0860006/N 1/90 7 0860007/N 1/45 TECHNICAL SPECIFICATIONS Mention N in the code to order the black handle. Mention B in the code to order the blue handle. Size of the handle corresponding to each valve. Art. 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 111/112 1 1 1 2 3 3 4 4 6 7 7 090/091 1 1 1 3 3 4 4 5 6 7 7 116/117 1 1 1 3 3 4 4 5 - - - 070/071G - - 2 3 3 4 5 5 - - - 080/081 - - 2 3 3 4 5 5 - - - 120/121 - - - - - - - - 7 7 7 131/132-1 1 2 2 - - - - - - 166/168 - - 1 1 - - - - - - - 170/174 - - 1 1 - - - - - - - 178/179 - - 1 1 - - - - - - - 066/067G 1 1 2 3 3 4 5 5 - - - 076/077 1 1 2 3 3 4 5 5 - - - 115 - - 1 3 3 4 4 5 - - - 098 - - - - - - 4 5 - - - MATERIALS HANDLE FOR BALL VALVES 2 1 POS. DESCRIPTION N. MATERIAL 1 Lever handle 1 Zinc-plated and varnished steel Fe.P.04 2 Screw 1 Zinc-plated steel Fe CB4

OVERALL DIMENSIONS A TEC CERTIFICATIONS HANDLE B C 1 2 3 4 5 6 7 A 80 88,5 113 138 157,8 197 250 B 23,5 29,5 32 41 47 54 59,5 C 20 23 25 31 37 50 59

084 FLAT LEVER HANDLE FOR BALL VALVES SIZE CODE PACKING 1 0840001/V 1/800 2 0840002/V 1/600 3 0840003/V 1/400 4 0840004/V 1/250 5 0840005/V 1/170 TECHNICAL SPECIFICATIONS Mention V in the code to order the green handle. Size of the handle corresponding to each valve. Art. 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 111/113 1 1 1 2 3 3 4 4 211 1 1 1 2 3 3 4 4 090/091 1 1 1 3 3 4 4 5 116/117 1 1 1 3 3 4 4 5 216/217 1 1 1 3 3 4 4 5 070/071G - - 2 3 3 4 5 5 080/081 - - 2 3 3 4 5 5 133-1 1 2 2 - - - 166/168 - - 1 1 - - - - 170/174 - - 1 1 - - - - 178/179 - - 1 1 - - - - 066/067G 1 1 2 3 3 4 5 5 076/077 1 1 2 3 3 4 5 5 376/377 1 1 2 3 3 4 5 5 115 - - 1 3 3 4 4 5 145 1 1 1 3 3 4 4 5 MATERIALS HANDLE FOR BALL VALVES 2 1 POS. DESCRIPTION N. MATERIAL 1 Flat lever handle 1 Zinc-plated and plastic coated steel Fe.P.04 2 Screw 1 Zinc-plated steel Fe CB4

OVERALL DIMENSIONS A TEC HANDLE B C 1 2 3 4 5 A 85 92 113 137,5 157 B 27,5 30,5 33 41 47,5 C 22 25 27 32 39 CERTIFICATIONS

084LK LOCKING DEVICE FOR LOCKABLE FLAT LEVER HANDLE SIZE CODE PACKING 1 084LK01 10/500 2 084LK02 10/500 3 084LK03 10/500 TECHNICAL SPECIFICATIONS Zincplated K3 zamak. The device is supplied without padlock. Suitable padlock with long shackle: 6mm / 1/4. The device is to be used on valves and biblocks with flat lever handle. Size of the handle corresponding to each valve as in art. 084-084G grey background chart. MATERIALS 1 POS. DESCRIPTION N. MATERIAL 1 Locking device for lockable flat lever handle 1 Zinc-plated aluminium ZnAl4 (ZamaK 3) OVERALL DIMENSIONS A D HANDLE FOR BALL VALVES C B CERTIFICATIONS 1 2 3 A 34 35 38 B 28,9 29,9 30,9 C 25,5 27 29,5 D 6,5 6,5 6,5

084PP TEC PIN FOR LOCKING DEVICE CODE PACKING 084PP03 - MATERIALS 1 POS. DESCRIPTION N. MATERIAL 1 Pin for locking device 1 Zinc-plated steel AVpb OVERALL DIMENSIONS A D B E C 03 A 37,8 B 10 C 6 D 35 E 3 INSTALLATION LOCKING DEVICE FOR LOCKABLE FLAT LEVER HANDLE 1. Remove the handle from the valve, when you want to have a lockable valve. 3. Place and lock the locking device either on the open or on the shut-off valve. The device is to be used on valves and biblocks with flat lever handle. When the valve is not equipped with a flat lever handle, it is possible to replace the standard handle as shown in this catalogue, in order to have a lockable valve. 2. Replace the handle with the corresponding flat lever handle, in order to have a lockable valve. 4. Pin for locking device. It is suitable for water and gas ball valves. HANDLE

087 T HANDLE FOR BALL VALVES AND BIBCOCKS SIZE CODE PACKING 1 0870001/N/V/B 1/2000 2 0870002/N/V/B 1/1500 3 0870003/N/V/B 1/1200 4 0870004/N/B 1/800 TECHNICAL SPECIFICATIONS Mention N in the code to order the black handle. Mention V in the code to order the green handle. Mention B in the code to order the blue handle. Size of the handle corresponding to each valve. Art. 1/4 3/8 1/2 3/4 1 1 1/4 113/114 1 1 1 2 2-092/093 1 1 1 3 3 4 118/119 1 1 1 2 3-072/073G - - 2 3 3-082/083 - - 2 3 3-134 - 1 1 2 3-172/176 - - 1 1 - - 180 - - 1 1 - - 068/069G 1 1 2 3 3-078/079 1 1 2 3 3-378/379 1 1 2 3 3-098 - - 1 3 3 4 298 - - 1 3 3 - MATERIALS HANDLE FOR BALL VALVES POS. DESCRIPTION N. MATERIAL 1 T handle 1 Varnished aluminium 1 2 2 Screw 1 Zinc-plated steel Fe CB4

OVERALL DIMENSIONS A TEC HANDLE B 1 2 3 4 A 47 54 62 70 B 23,5 24,8 25,5 30 CERTIFICATIONS

088 EXTENDED HANDLE FOR LINED PIPING SIZE CODE PACKING 1 0880001 1/250 2 0880002 1/180 3 0880003 1/120 4 0880004 1/90 5 0880005 1/60 6 0880006 1/50 7 0880007 1/25 TECHNICAL SPECIFICATIONS The extended handle in aluminium can be used with the valves indicated in the following chart. Size of the handle corresponding to each valve. Art. 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 111/112 1 1 1 2 3 3 4 4 6 7 7 090/091 1 1 1 3 3 4 4 5 6 7 7 116/117 1 1 1 3 3 4 4 5 - - - 080/081 - - 2 3 3 4 5 5 - - - 070/071 - - 2 3 3 4 5 5 - - - 066/067 1 1 2 3 3 4 5 5 - - - 076/077 1 1 2 3 3 4 5 5 - - - 120 - - - - - - - - 7 7 7 115 - - 1 3 3 4 4 5 - - - 098 - - 1 3 3 4 - - - - - MATERIALS HANDLE FOR BALL VALVES 2 1 POS. DESCRIPTION N. MATERIAL 1 Extended lever handle 1 Varnished aluminium 2 Screw 1 Zinc-plated steel Fe

OVERALL DIMENSIONS A TEC C HANDLE B 1 2 3 4 5 6 7 A 80 88,5 113 138 158 197 250 B 60 68 74 77,6 81,7 88 119,5 C 26,63 27,32 29,73 35,20 41,17 51,71 61,42 CERTIFICATIONS

086G LEVER HANDLE FOR BALL VALVES SIZE CODE PACKING 1 0860001G 1/1000 2 0860002G 1/800 3 0860003G 1/500 4 0860004G 1/300 5 0860005G 1/200 6 0860006G 1/90 7 0860007G 1/45 TECHNICAL SPECIFICATIONS Size of the handle corresponding to each valve. Art. 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 111/112 1 1 1 2 3 3 4 4 6 7 7 090/091 1 1 1 3 3 4 4 5 6 7 7 116/117 1 1 1 3 3 4 4 5 - - - 070/071G - - 2 3 3 4 5 5 - - - 080/081 - - 2 3 3 4 5 5 - - - 120/121 - - - - - - - - 7 7 7 066/067G 1 1 2 3 3 4 5 5 - - - 076/077 1 1 2 3 3 4 5 5 - - - MATERIALS HANDLE FOR BALL VALVES 2 1 POS. DESCRIPTION N. MATERIAL 1 Lever handle 1 Zinc-plated and varnished steel Fe.P.04 2 Screw 1 Zinc-plated steel Fe CB4

OVERALL DIMENSIONS A TEC HANDLE B C 1 2 3 4 5 6 7 A 80 88,5 113 138 157,8 197 250 B 23,5 29,5 32 41 47 54 59,5 C 20 23 25 31 37 50 59

084G FLAT LEVER HANDLE FOR BALL VALVES SIZE CODE PACKING 1 0840001G 1/800 2 0840002G 1/600 3 0840003G 1/400 4 0840004G 1/250 5 0840005G 1/170 TECHNICAL SPECIFICATIONS Size of the handle corresponding to each valve. Art. 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 111/112 1 1 1 2 3 3 4 4 090/091 1 1 1 3 3 4 4 5 116/117 1 1 1 3 3 4 4 5 070/071G - - 2 3 3 4 5 5 080/081 - - 2 3 3 4 5 5 066/067G 1 1 2 3 3 4 5 5 266/267G 1 1 2 3 3 4 5 5 076/077 1 1 2 3 3 4 5 5 MATERIALS HANDLE FOR BALL VALVES 2 1 POS. DESCRIPTION N. MATERIAL 1 Flat lever handle 1 Zinc-plated and plastic coated steel Fe.P.04 2 Screw 1 Zinc-plated steel Fe CB4

OVERALL DIMENSIONS A TEC B C 1 2 3 4 5 A 85 92 113 137,5 157 B 27,5 30,5 33 41 47,5 C 22 25 27 32 39 INSTALLATION LOCKING DEVICE FOR LOCKABLE FLAT LEVER HANDLE 1. Remove the handle from the valve, when you want to have a lockable valve. 3. Place and lock the locking device either on the open or on the shut-off valve. The device is to be used on valves and biblocks with flat lever handle. When the valve is not equipped with a flat lever handle, it is possible to replace the standard handle as shown in this catalogue, in order to have a lockable valve. 2. Replace the handle with the corresponding flat lever handle, in order to have a lockable valve. 4. Pin for locking device. It is suitable for water and gas ball valves. HANDLE

087G T HANDLE FOR BALL VALVES SIZE CODE PACKING 1 0870001G 1/2000 2 0870002G 1/1500 3 0870003G 1/1200 TECHNICAL SPECIFICATIONS Size of the handle corresponding to each valve. Art. 1/4 3/8 1/2 3/4 1 1 1/4 113/114 1 1 1 2 2-092/093 1 1 1 3 3 4 118/119 1 1 1 2 3-072/073G - - 2 3 3-082/083 - - 2 3 3-068/069G 1 1 2 3 3-078/079 1 1 2 3 3 - MATERIALS 2 1 POS. DESCRIPTION N. MATERIAL 1 T handle 1 Varnished aluminium 2 Screw 1 Zinc-plated steel Fe CB4 HANDLE FOR BALL VALVES OVERALL DIMENSIONS A 1 2 3 A 47 54 62 B B 23,5 24,8 25,5

NOTES TEC We reserve the right to make improvements and changes to the products described herein and to the relative technical data, at any time and without forewarning. HANDLE

ITAP S.p.A. Via Ruca 19 25065 Lumezzane Brescia (ITALIA) Tel 030 89270 Fax 030 8921990 www.itap.it-info@itap.it 09/2016

2024 © travelsdocbox.com Privacy Policy | Terms of Service | Feedback