Sunshade System / Air Foil - PDF Free Download

Sunshade System / Air Foil 2-1/8 Air Foil x 16 56-63-200 4 Air Foil x 24 56-63-400 Wall:.080 ENGINEERING AVAILABLE UPON REQUEST Florida items are available to all branches via shuttle. 6 Air Foil x 24 56-63-600 Wall:.085/.100 52-63-1020 (MO) Wall:.085 7 Air Foil MILL ORDER 52-63-12534 8 Air Foil x 24 (2 screw bosses) 56-63-800 Wall:.100 52-63-1025 (NC) 8 Air Foil x 24 (4 screw bosses) 56-63-800 (TX) Wall:.100 10 Air Foil MILL ORDER 56-63-1000 Wall:.125 12 Air Foil MILL ORDER 52-63-11852 Wall:.188 Scan QR Code to view Architectural section online: 2 Hollow Blade x 16 80-MF-013 Mill Finish uses #14 screw 2 Hollow Blade x 16 41-63-830 Mill Finish 2 Blade x 16 41-63-835 Mill Finish 2 Solid Blade x 20 52-63-4696 Mill Finish 52-63-3060 White Architectural 01 website: www.easternmetal.com e-mail: info@easternmetal.com version: 08/16/17

Sunshade System / Air Foil ENGINEERING AVAILABLE UPON REQUEST Florida items are available to all branches via shuttle. 2 Full Round Bull Nose MILL ORDER 052295 3 Full Round Bull Nose x 24 56-63-201 Wall:.083 4 Full Round Bull Nose x 24 56-63-204 Wall:.093 Sloped Sunshade Bullnose x 24 MILL ORDER 52-61-4733 Wall:.125 4 Half Round Bull Nose x 24 56-63-202 Wall:.083 6 Half Round Bull Nose x 24 56-63-205 Wall:.100 5" Shadow Box x 24' 56-63-905 6063 T6 M/F Wall:.080 3" Radius Tube x 24' 40-63-722 6063 T6 M/F (for louvers) 4" Radius Tube x 24' 40-63-724 6063 T6 M/F (for louvers) 5" Radius Tube x 24' 40-63-723 6063 T6 M/F (for louvers) 4 Self-Mating Channel MILL ORDER 52-63-420 (TX) Wall:.080 Measures out to 2 x 4 when mated 6 Self-Mating Channel MILL ORDER 52-63-622 (TX) Wall:.080 Measures out to 2 x 6 when mated 8 Self-Mating Channel MILL ORDER 52-63-11390 Wall:.080 Measures out to 2 x 8 when mated Pre-Fabricated framing items are also available. Ask your sales representative for more information. Architectural 02 website: www.easternmetal.com e-mail: info@easternmetal.com version: 08/08/16

Pre-Fabricated Sunshade System Ready-to-weld - Available mitered or square cut with pre-punched holes. Rectangular Tube or Bar Frames and Air Foil Blades from 2 to 12 1 Fast Assembly 1 Increased Strength 1 Minimal Welding for a Clean Look 1 Fewer Parts, Less Inventory Rect. Tube Frames (Mitered for welding) Pre-punched rectangular tubes for side frames and center mullion Air Foil Louver Blades Pre-Fabricated Sunshade System Ready-to-Weld or Mechanically Join Available mitered or square cut with pre-punched holes Rectangular Tube or Rectangular Bar Frames & Air Foil Blades from 2 to 12 Pre-punched rectangular tubes for side frames and center mullion Rectangular Tube Frame Rectangular Tube Frames (Mitered for welding) Left and Center Pics: Mitered side frames with blades through center mullion Far Right Pic: Pre-Fabricated Flat Bar Outriggers and Mullions Sunshade System Schematic Mechanical Self-Mating Snap System Air Foil Blades from 2 to 12 Frame - can be rectangular tube or Self Mating Channel (Mitered) Side Frame: Self Mating Channel (Mitered & Mated) Half Round Bull Nose (Mechanically attached at sides and tack welded at mullion) Mechanical System Rectangular Bar Outiggers (Tapered and Pre-drilled to accomodate screw bosses in air foil blades) Air Foil Louver Blades 1 Air Foil Louver Blades Rectangular Tube Frames (Fabricated to accommodate Bull Nose) Rectangular Bar Center Mullion (Pre-Punched and Tapered) Air Foil Louver Blades Side Frame: Self Mating Channel (Mitered) Counter Sunk Holes 1 1 Air Foil Louver Blades Full Round Bull Nose Option Half Round Bull Nose Option Half Round or Full Round Bull Nose Center Mullion - Rectangular Tube (can be pre-punched) Architectural 03 ENGINEERING AVAILABLE UPON REQUEST website: www.easternmetal.com e-mail: info@easternmetal.com version: 06/09/16

Louver Shapes Florida items are available to all branches via shuttle. L-2 - Louver Blade x 20 51-63-067 wt/ft: 0.405 mates with L-5; 13-63-265 and 13-63-274 (FL) L-6 - Louver Blade x 24 51-63-006 wall:.062 mates with L-5 L-1 - Louver Blade x 24 52-63-1913 51-63-062 x 20 wt/ft: 0.860 mates with L-4 L-7 - Louver Blade x 24 31-63-100 wt/ft: 0.826 mates with L-4 2 x.375 Louver Blade x 16 80-MF-013 wall:.045 mates with L-5 Channels 2 x 0.75 x 23 10 (L5) Wall:.125/.093 13-63-262 mates with L-2 and L-6 2 x 1 x.125 Wall:.125 13-63-265 x 20 mates with L-2 13-63-274 (FL) x 24 mates with L-2 Mechanical Snap Fit Louver Frame Cover (top) MILL ORDER 52-63-13631 Frame (bottom) MILL ORDER 52-63-13629 Cover mates with Frame (see below) *Similar system shown on Architectural 03 Typical Riveted Louver Assembly Cut Away L2 Louver Blades with L5 Channel 4 x 1 x 20 (L4) Wall:.105/.080 13-63-273 mates with L-7 and L-1 (with radius) 2 x 12 x.156 Rectangular Tube 2178-008 (MO) (with 4 screw receivers) L6 - Typical Assembly Schematic L6 Louver Blades with L5 Channels L7 - Typical Assembly Schematic L7 Louver Blades with L4 Channels Architectural 04 website: www.easternmetal.com e-mail: info@easternmetal.com version: 08/08/16

Trellis & Pergolas Florida items are available to all branches via shuttle. Commonly used Aluminum Tube for Trellis & Pergolas Rectangular Aluminum Tube 6063-T52 x 24 (Unless noted otherwise) Approx. Stock Code Size in Inches (E x M x S) Wt/Lin ft. 20-63-280 2 x 4 x.125 1.724 20-63-285 2 x 5 x.125 2.025 20-63-290 2 x 6 x.125 2.327 20-63-295 2 x 8 x.125 2.925 20-63-400 2 x 10 x.125 (6063-T6) 3.541 20-63-500 2 x 12 x.188 6.210 20-63-303 3 x 6 x.125 (6063-T6) 2.625 20-63-302 3 x 8 x.110 (6063-T6) 2.862 20-63-700 3 x 10 x.125 (6063-T6) 3.824 20-63-305 3 x 12 x.188 (6005 T5) 6.613 20-63-803 4 x 6 x.125 2.925 20-61-524 (NC/DE) 4 x 8 x.250 (6061-T6) 6.900 20-61-500 4 x 10 x.250 (w/.25 radius; 6061-T6) 8.036 20-61-505 4 x 12 x.250 x 26 (6005-T6) 9.300 56-63-019 6 x 8 x.188 (w/rad) 6063-T6 x 25 6.196 56-63-027 6 x 10 x.19 (w/rad) 6063-T6 x 25 7.171 20-63-800 6 x 12 x.250 (w/.125 radius) 10.500 Please see Standards p16 for a full listing of our Rectangular Tube Square Aluminum Tube 6063-T52 x 24 (Unless noted otherwise) Approx. Stock Code Size in Inches (E x M x S) Wt/Lin ft. 19-63-140 1 x.125 0.524 19-63-170 1.500 x.125 0.824 19-63-210 2 x.125 1.126 19-63-235 3 x.125 1.726 19-63-245 4 x.125 2.324 19-63-255 5 x.125 2.925 19-61-258 5 x.250 (6061-T6) 5.700 19-63-260 6 x.125 3.525 19-61-260 6 x.250 6.900 19-63-265 8 x.188 7.050 19-63-300 10 x.250 x 24' (6063-T6 w/rad) 11.700 Please see Standards p15 for a full listing of our Square Tube Architectural 05 Typical Scalloped End Trellis/Pergola tube fabrication services available through EMS website: www.easternmetal.com e-mail: info@easternmetal.com version: 08/31/16

Architectural Canopy Schematic Available in: Mill Finish & Anodized; Various Lengths & Alloys ENGINEERING AVAILABLE UPON REQUEST Back Gutter Fascia Tie Back Clip Hanger Arm: Square Tube, Round Tube or Pipe Self Mating Pans Architectural Canopy: Perspective Assembly Channel for support brace Square Tube support brace Tie Back Clip Attaches to Support Brace and Top Fascia Lip Side Gutter Fascia Multiple drainage options available via Gutter Fascia Front Gutter Fascia Front Fascia height can be increased by attaching 2 x 4 angle to the top fascia lip. Architectural Canopy: Front View Assembly Industrial Channel Fascia Option Side Gutter Fascia Tie Back Clip Hanger Arm: Square Tube, Round Tube or Pipe Channel for support brace Top Lip of Back Gutter Fascia Gutter Extender Option Tie Back Clip Self Mating Pans Front Gutter Fascia removed to display interior components of canopy Architectural 06 website: www.easternmetal.com e-mail: info@easternmetal.com version: 04/28/17

Architectural Canopy ENGINEERING AVAILABLE UPON REQUEST Florida items are available to all branches via shuttle. *Custom lengths, finishes and additional profiles are also available on a minimum MILL ORDER basis. 3 x 6 Self Mating Canopy Roof Pan x 24 56-63-015 (0.065 - Light Wall) MILL ORDER 20160-020 (TX) 0.078 - Heavy Wall 3 x 6 x.078 Self Mating Canopy Roof Pan (V-Deck) (3 On Center V) MILL ORDER 52-63-11677 (FL/NC) 0.078 - Heavy Wall 3 x.045 Extruded Header 200-WH-019 White x 24 200-MB-019 Bronze x 24 200-WH-020 White x 30 200-MB-020 Bronze x 30 3 x 12 Carport Roll Form Roof Pan (5 Rib) 3 x 12 x.050 Carport Roll Form Roof Pan (2 Rib) Self Mating Available in.032 and.024 thicknesses Self Mating Custom Lengths Available in White & Bronze Custom Lengths Available in White & Bronze CRATE CHARGE MAY APPLY (please inquire with your sales person) CRATE CHARGE MAY APPLY (please inquire with your sales person) Production Lead Times average 5-7 Business Days + shipping Production Lead Times average 5-7 Business Days + shipping 4 x 6 x.093 Gutter Fascia x 24 56-63-033 Mill Finish 56-63-036 204-R1 Clear Anodized 56-MB-036 Bronze 56-WH-036 White 3 x 8 x.125 Gutter Fascia x 24 21929-025M (TX) Mill Finish 21929-667 (TX) 204-R1 Clear Anodized 4 x 8 x.125 Gutter Fascia x 24 56-63-016 Mill Finish 4 x 8 x 3 x.125 Gutter Fascia x 24 56-63-039 Mill Finish 4 x 10 x 4 x.125 Gutter Fascia x 24 56-63-043 56-63-045 x 30 Mill Finish 4 x 12 x 5 x.160 Gutter Fascia x 24 56-63-042 Mill Finish Gutter/Fascia Extender x 24 2 x 4.5 x.093 x 24 56-63-041 Mill Finish See schematic on Architectural p 06 12 Industrial Channel Fascia x 24 52-63-14284 Mill Finish Mates with 4 x 6, 4 x 8, 4 x 10, 4 x 12 Gutter Fascias See schematic on Arch p 06 Fascia Splice x 20 21929-253 (TX) Mill Finish Fits 3 x 8 Gutter Fascia 21929-667 and 21929-025M Female Pin 6061-T6511 Mill Finish 13335-1 1-1/2 Special Order 13335-2 2 Special Order 132 pcs Minimum Order; Comes with bolt; Fits 1-1/2 and 2 Round Tubes Tie Back Clips 2 x 12 40-63-262 Receives 2 Square Tube; Also used as support brace bracket Saddle Bracket 6063-T6 Clear Anodized SB-CLIP Receives 2 Square Tube Architectural 07 website: www.easternmetal.com e-mail: info@easternmetal.com version: 01/23/18

Walkway Schematic - Now Stocking! Standard Walkway Shapes - 204 R1 Anodized ENGINEERING AVAILABLE UPON REQUEST Walkway System: Perspective Assembly Architectural 08 website: www.easternmetal.com e-mail: info@easternmetal.com version: 08/30/16

Walkway Systems 3 x 6 Self Mating Canopy Roof Pan x 24 56-63-015 (0.065 - Light Wall) MILL ORDER 20160-020 (TX) 0.078 - Heavy Wall ENGINEERING AVAILABLE UPON REQUEST Florida items are available to all branches via shuttle. *Custom lengths, finishes and additional profiles are also available on a minimum MILL ORDER basis. 3 x 6 x.078 Self Mating Canopy Roof Pan (V-Deck) (3 On Center V) MILL ORDER 52-63-11677 0.078 - Heavy Wall 3 x 12 Carport Roll Form Roof Pan (5 Rib) 3 x 12 x.050 Carport Roll Form Roof Pan (2 Rib) Self Mating Available in.032 and.024 thicknesses Self Mating Custom Lengths Available in White & Bronze Custom Lengths Available in White & Bronze CRATE CHARGE MAY APPLY (please inquire with your sales person) CRATE CHARGE MAY APPLY (please inquire with your sales person) Production Lead Times average 5-7 Business Days + shipping Production Lead Times average 5-7 Business Days + shipping WWC-17 P Roof Pan x 24 2 Wall:.060 Mates with WWC-19 56-63-001 1/2 Bottom Clear Anodized Mates with 2-3/4 Top & 4-1/2 Top 21929-001 (TX) x 20 Bottom Clear Anodized Mates with 2-3/4 Top & 4-1/2 Top 21929-004 (TX) x 20 21929-006 (TX) x 24 WWC-19 P Cap (Flat) x 24 2 Wall:.060 Mates with WWC-17 56-63-008 2-3/4 Top Clear Anodized Mates with 1/2 Bottom & Bottom 21929-008 (TX) x 20 21929-010 (TX) x 24 4-1/2 Top Clear Anodized Mates with 1/2 Bottom & Bottom 21929-023 (TX) x 20 21929-012 (TX) x 24 2 Pan End Cap x 12 1 Wall:.085 6063-T6 10-63-100 Mill Finish T-Flashing x 24 56-63-040 Architectural 09 website: www.easternmetal.com e-mail: info@easternmetal.com version: 01/23/18

Walkway Systems ENGINEERING AVAILABLE UPON REQUEST Florida items are available to all branches via shuttle. *Custom lengths, finishes and additional profiles are also available on a minimum MILL ORDER basis. 4 x 6 x.093 Gutter Fascia x 24 56-63-033 Mill Finish 56-63-036 204-R1 Clear Anod 56-MB-036 Bronze 56-WH-036 White 3 x 8 x.125 Gutter Fascia x 24 21929-025M (TX) Mill Finish 21929-667 (TX) 204-R1 Clear Anod 4 x 8 x.125 Gutter Fascia x 24 56-63-016 Mill Finish 4 x 8 x 3 x.125 Gutter Fascia x 24 56-63-039 Mill Finish 4 x 10 x 4 x.125 Gutter Fascia x 24 56-63-043 56-63-045 x 30 Mill Finish 4 x 12 x 5 x.160 Gutter Fascia x 24 56-63-042 Mill Finish 6.1 x.070 Fascia x 24 6063-T6 204 R1 Anodized 56-63-005 6.404 x 1 x.070 Side Fascia x 24 6063-T6 204 R1 Anodized (F-2 - w/hook) 56-63-007 Fascia Splice x 20 21929-253 (TX) Mill Finish Fits 3 x 8 Gutter Fascia 21929-667 and 21929-025M 4 x 4 x.150 Gutter Beam x 20 MILL ORDER 21929-713 (TX) 4 x 6 x.190/.125 Gutter Beam x 24 2 56-63-011 4 x 8 x.190/.150 Gutter Beam x 24 2 56-63-013 6 x 6 x.150 Gutter Beam x 24 6 56-63-038 6 x 6 x.130/.190 Gutter Beam 6005-T5 Mill Finish 21929-441 (TX) x 20 21929-452 (TX) x 24 21929-431 (TX) x 30 Architectural 10 website: www.easternmetal.com e-mail: info@easternmetal.com version: 09/21/17

Walkway Systems ENGINEERING AVAILABLE UPON REQUEST Florida items are available to all branches via shuttle. *Custom lengths, finishes and additional profiles are also available on a minimum MILL ORDER basis. 6 x 8 x.190 Gutter Beam GB-12-A 6063-T6-204 R1 Anodized 56-63-021 x 25 56-63-022 x 30 6063-T6 - Mill Finish 56-63-023 x 25 56-63-024 x 30 6 x 10 x.190 Gutter Beam GB-13 56-63-029 x 25 56-63-030 x 30 6063-T6 - Mill Finish 56-63-031 x 25 56-63-032 x 30 6 x 12 Drain Beam MILL ORDER #EMSWLB640 4 x.080 Gutter Beam End Cap x 97 52-63-11157 6 x.080 Gutter Beam End Cap x 97 52-63-11158 3 x.045 Extruded Header 200-WH-019 White x 24 200-MB-019 Bronze x 24 200-WH-020 White x 30 200-MB-020 Bronze x 30 41 x 4.125 x.125 Square Rect Tube Tube x 24 x 24 4 x 6.1254 Sq x.156 Tube Square x 24 2 Tube 4 Boss x.156 Square 4.5 Tube x.093 BossSquare 4.5 x.093 TubeSquare Tube 4 x 6 x 2.150 x 6 x Rect..125 Rect Tube Tube x 24 x 24 2 20-ANOD-235 (.125 radius) (.125 radius) 6063-T6-204 R1 Anod. Column 6063-T6 Column (.125 radius) 6063-T6 (202-R1 Anodized) 202 R1 Anodized (.125 radius) 6063-T6 (.125 radius) 204 R1 Anodized 6005T6 Clear Anodized 56-MB-034 Bronze x 20 52-63-13710 56-63-003 (FL) x.125 6005T6 Clear Anodized 56-MB-034 (FL) Bronze x 20 56-63-003 x.125 6063-T6 204 R1 Anodized MILL ORDER 61-63-400 (TX) 56-MF-035 Mill Finish x 24 2 x 6 x.250 Rect Tube x 24 MILL ORDER 61-63-400 (TX) 56-MF-035 (FL) Mill Finish x 24 4 x.150 Square Tube x 22 56-WH-035 White x 24 56-63-004 (202-R1 (FL) Anodized) 56-WH-035 (FL) White x 24 4 x.150 Square Tube x 22 (.125 radius) 6063-T6 56-MB-035 Bronze x 24 52-63-13711 56-MB-035 (FL) Bronze x 24 (.125 radius) 6063-T6-204 R1 Anod. 204 R1 Anodized 56-63-010 (FL) 56-63-010 4 x 6 x.150 Rect. Tube x 24 2 (.125 radius) 6063-T6 204 R1 Anodized 56-63-004 6 x.150 Square Tube 56-63-037 x 24'6" (w/.093 Radius) 6 x.180 Square Tube MILL ORDER 19-63-302 (TX) 6 x.180 Square Tube Boss Column 6005T6 Clear Anodized MILL ORDER 61-63-600 (TX) 4 x 8 x.190/.150 Rect. Tube x 24 2 6063-T6 204 R1 Anodized 56-63-014 6 x 8 x.188 Rect. Tube x 25 With Radius 56-63-017 56-63-018 x 30 56-63-019 56-63-020 x 30 6 x 10 x.190 Rect. Tube x 25 With Radius 56-63-025 56-63-026 x 30 56-63-027 56-63-028 x 30 10 x.250 Square Tube x 24 With Radius 19-63-300 1.75 x 11.75 x.125 Rectangular Tube with Center Web MILL ORDER 1004-018 (TX) 6 x 12 x.250 Rect. Tube x 24 With Radius 20-63-800 6 x 14 x.250 Rect. Tube With Radius MILL ORDER 43272 (TX) Architectural 11 website: www.easternmetal.com e-mail: info@easternmetal.com version: 03/23/17

Engineered Carport Kit Schematic: Freestanding & Attached Design is based on: IBC 2009, ASCE 7-10 (FL), ASCE 7-05 (listed states*), FBC & NCBC - Latest Editions Freestanding Carport See Architectural p04 for Self-Mating Pans: Low Wind (shown in diagram): 3 x 12 x.050 Roll Formed Pans Attached Carport U-Header *Sealed Engineering Drawings for: FL, GA, SC, NC, AL, LA, TX FL Wind Velocity: Low Wind: Vult = 125 mph High Wind: Vult = 175 mph Snow Load: 20 psf Custom Sizes Available upon Request Can also be used in Canopy or Walkway applications Roll Form Pan available in White & Bronze Extruded Post & Gutter Available in Bronze & White Install Kits Available: includes rebar, threaded rod, nuts, bolts, screws, and concrete adhesive EMS will provide pre-fabricated Posts including notching, 7 top side holes (see engineering for details) 4-1/2 Post 3/8 Base Plate: shop welded to column base Holes for 1/2 Anchors Post Max Spacing: Centerline to Centerline: 10 3-3/4 Max Height: 10 - bottom of Gutter Fascia to top of slab. 4-1/2 Post Grade-Level drain holes to be field drilled where needed. (2) 1-1/2 Holes Each Side w/#5 Rebar, Grade 40 Steel Engineering available upon request. Architectural 12 website: www.easternmetal.com e-mail: info@easternmetal.com version: 06/05/17

Engineered Carport Kit ENGINEERING AVAILABLE UPON REQUEST Florida items are available to all branches via shuttle. *Custom lengths, finishes and additional profiles are also available on a minimum MILL ORDER basis. 3 x 6 x.078 Self Mating Canopy Roof Pan x 24 MILL ORDER 20160-020 (TX) Meets High Wind: 175 mph Exposure C Snow Load: 20 psf 3 x 6 x.078 Self Mating Canopy Roof Pan (V-Deck - 3 on center) MILL ORDER 52-63-11677 Meets High Wind: 175 mph Exposure C Snow Load: 20 psf 3 x 6 x.065 Self Mating Canopy Roof Pan x 24 56-63-015 Meets Wind: 125 mph Exposure B Snow Load: 20 psf 3 x 12 x.050 Carport Roll Form Roof Pan (2 Rib) Self Mating Custom Lengths Available in White & Bronze CRATE CHARGE MAY APPLY (please inquire with your sales person) Production Lead Times average 5-7 Business Days + shipping 1 x 3 x 1.6 x.040 Roll Form Breakform End Cap Custom Lengths Available in White & Bronze Extruded Patio Roof U-Header x 24 47153 White Wall:.045 4 x 6 x.093 Gutter Fascia x 24 (6005-T5) 56-63-033 Mill Finish 56-63-036 204-R1 Clear Anodized 56-MB-036 Bronze 56-WH-036 White 4 x 6 x.190/.125 Gutter Beam x 24 2 56-63-011 4.5 x.093 Square Tube x 24 (.125 radius) 6063-T6 56-MB-034 Bronze x 20 56-MF-035 Mill Finish 56-WH-035 White 56-MB-035 Bronze 4 x 6 x.150 Rect. Tube x 24 2 (.125 radius) 6063-T6 204 R1 Anodized 56-63-004 Architectural 13 website: www.easternmetal.com e-mail: info@easternmetal.com version: 01/23/18

Screen Room Enclosure Shapes Florida items are available to all branches via shuttle. 1/2 x 2 Archway x 24 x.040 min. (Patio) 200-WH-029 White 200-MB-029 Bronze 1 x 2 Open Back x.040 min. (Patio) 200-WH-001 White x 24 42-WH-002 (MO) White x 24 200-MB-001 Bronze x 24 42-MB-002 (MO) Bronze x 24 200-WH-002 White x 30 200-MB-002 White x 30 1 x 3 Open Back x.040 min. (Patio) 200-WH-070 White x 24 200-MB-070 Bronze x 24 200-WH-071 White x 30 200-MB-071 Bronze x 30 2 x 2 Hollow x.040 min. (Patio) 200-WH-003 White x 24 42-WH-001 (MO) White x 24 200-MB-003 Bronze x 24 42-MB-001 (MO) Bronze x 24 200-WH-004 White x 30 200-MB-004 Bronze x 30 10 pc 10 pc Sub-Bundles 10 pc Sub-Bundles Sub-Bundles 6 pc Sub-Bundles 2 x 3 x.045 Patio 200-WH-009 White x 24 200-MB-009 Bronze x 24 200-WH-010 White x 30 200-MB-010 Bronze x 30 3 x 2 x.045 Patio 200-WH-011 White x 24 200-MB-011 Bronze x 24 200-WH-012 White x 30 200-MB-012 Bronze x 30 2 x 4 x.050 Patio 200-WH-013 White x 24 200-MB-013 Bronze x 24 200-WH-014 White x 30 200-MB-014 Bronze x 30 4 pc Sub-Bundles 4 pc Sub-Bundles 4 pc Sub-Bundles 2 x 5 x.050 Patio 200-WH-015 White x 24 200-MB-015 Bronze x 24 200-WH-016 White x 30 200-MB-016 Bronze x 30 2 x 2 Universal Snap x 24 200-WH-080 White 200-MB-080 Bronze 3 x 3 Eve Rail 200-WH-082 White x 24 200-MB-082 Bronze x 24 200-WH-083 White x 30 200-MB-083 Bronze x 30 2 pc Sub-Bundles 6 pc Sub-Bundles 4 pc Sub-Bundles 1 x 2 Self-Mating Snap 42-WH-005 (MO) White x 24 200-WH-005 White x 25 200-MB-005 Bronze x 25 1 x 3 Self-Mating Snap x 25 200-WH-006 White 200-MB-006 Bronze 1 x 4 Self-Mating Snap 200-WH-007 (FL) White x 24 200-MB-007 (FL) Bronze x 24 200-WH-008 (FL) White x 30 200-MB-008 (FL) Bronze x 30 6 pc Sub-Bundles 4 pc Sub-Bundles Architectural 14 4 pc Sub-Bundles website: www.easternmetal.com e-mail: info@easternmetal.com version: 10/20/17

Screen Room Enclosure Shapes 2 x 2 Door Jamb x 24 200-WH-023 White 200-MB-023 Bronze 2 x 3 Door Jamb x 24 200-WH-072 White 200-MB-072 Bronze Adjustable Z-Bar x 17 200-WH-024 White 200-MB-024 Bronze Florida items are available to all branches via shuttle. 1-1/2 x 2-1/8 Receiving Channel x 24 200-WH-065 White 200-MB-065 Bronze 1-1/2 x 3-1/8 Receiving Channel x 24 200-WH-064 White 200-MB-064 Bronze 6 pc Sub-Bundles 6 pc Sub-Bundles 10 pc Sub-Bundles 3 x 12 Roll Form Roof Pan (5 Rib) Self Mating SPECIAL ORDER: Wall:.024 SPECIAL ORDER: Wall:.032 SPECIAL ORDER: Wall:.050 (2 Ribs) Custom Lengths Available in White & Bronze CRATE CHARGE MAY APPLY (please inquire with your sales person) Production Lead Times average 5-7 Business Days + shipping 3 x.045 Extruded Header 200-WH-019 White x 24 200-MB-019 Bronze x 24 200-WH-020 White x 30 200-MB-020 Bronze x 30 Extruded T-Gutter x 24 200-WH-021 White 200-MB-021 Bronze 5-1/2 Extruded Fascia x 27 200-WH-022 White 200-MB-022 Bronze E-Fascia x 27 200-WH-068 White 200-MB-068 Bronze 4 pc Sub-Bundles 3 Scallop Tube 42-WH-003 (MO) White x 20 200-WH-017 White x 24 200-MB-017 Bronze x 24 200-WH-018 White x 30 200-MB-018 Bronze x 30 2 pc Sub-Bundles E-Gutter 200-WH-066 White x 24 200-MB-066 Bronze x 24 200-WH-067 White x 30 200-MB-067 Bronze x 30 2 pc Sub-Bundles 3 Insulated Interlocking Roof Panels Available in 2 & 4 widths; a variety of lengths & colors, With or without Fan Beams. Contact your sales rep for more info. Products stocked in FL. 3" Panel WITHOUT Fan Beam (.024): 200-2WH-108 2' x 9' 200-WH-108 4' x 9' 200-2WH-120 2' x 10' 200-WH-120 4' x 10' 200-2WH-132 2' x 11' 200-WH-132 4' x 11' SPECIAL ORDER 2' x 12' 200-2WH-144 200-WH-144 4' x 12' 200-2WH-156 2' x 13' 200-WH-156 4' x 13' 200-2WH-180 2' x 15' 200-WH-180 4' x 15' 3" Panel WITH Fan Beam on Center (.024): 200-WH-108FB 4' x 9' 200-WH-120FB 4' x 10' 200-WH-132FB 4' x 11' 200-WH-144FB 4' x 12' 200-WH-156FB 4' x 13' 200-WH-180FB 4' x 15' Architectural 15 website: www.easternmetal.com e-mail: info@easternmetal.com version: 01/23/18

Screen Room Enclosure Accessories Rain Carrying Accessories 3 x 4 Downpipe 200-DS-001 White x 8' 200-DS-002 Bronze x 8' 200-DS-003 White x 10' 200-DS-004 Bronze x 10' Rain Carrying Accessories 3 x 4 Elbow "A" Elbow 200-AE-001 White 200-AE-002 Bronze "B" Elbow 200-BE-001 White 200-BE-002 Bronze 3" x 4" Drop Outlet 200-DO-001 Mill Finish - (FL) items are available to all branches via shuttle. Hinges 200-WH-035 200-MB-035 White (shown) Bronze Adapter for Closer 200-WH-036 White 200-MB-036 Bronze Door Blank with 8 Kick Plate 200-WH-032 White 200-MB-032 Bronze Door Hardware Kit 200-WH-033 White (shown) 200-MB-033 Bronze Bugsweep 200-WH-034 200-MB-034 White (shown) Bronze Actual Door Size: 35-5/8 x 79-1/2 Daylight Opening Size: 36 x 80 18/14 Charcoal Pool & Patio Enclosure Screen x 100 Rolls 200-CC-025 36" 200-CC-028 84" 200-CC-024 60" 200-CC-029 96" 200-CC-026 72" 200-CC-023 102" 200-CC-027 78" 200-CC-030 108" Flat Spline x 1000 200-CC-031 20/20 Charcoal Pool & Patio Enclosure Screen x 100 Rolls (No See Um) NYW-202036 36 NYW-202072 72 NYW-202084 84 NYW-202096 96 NYW-2020108 108 14/10 Charcoal Pool & Patio Enclosure Screen x 100 Rolls (Pet Screen) NYW-PR36 36 NYW-PR48 48.290 Flat Spline x 1000 (For Pet Screen) 200-CC-035 Paint, Caulk, Etc. 47137 Touch Up Paint White 47138 Touch Up Paint Bronze.024 x 16 Kick Plate Coil Rolls 200-KPWH-025 White x 25 200-KPMB-025 Bronze x 25 200-KPWH-050 White x 50 200-KPMB-050 Bronze x 50.024 x 24 Kick Plate Coil Rolls 200-KPWH-2425 White x 25 200-KPMB-2425 Bronze x 25 200-KPWH-2450 White x 50 200-KPMB-2450 Bronze x 50 Architectural 16 Fasteners - 5000pc min/box Stocked only in #10 Hex Washer Head Sheet Metal Screw; #8 (1/4" head) Also available in Bronze Product Code Description 0-10N150-0 (MO) 1-1/2" Xylan Zinc 0-10N200-0 (MO) 2" White Xylan 0-10N300-0 (MO) 3" White Xylan Special Order: 0-10N75-0 3/4" White Xylan 0-10N100-0 1" White Xylan 0-10N150-1 1-1/2" White Xylan 0-10N400-0 4" White Xylan website: www.easternmetal.com e-mail: info@easternmetal.com version: 01/24/17

Screen Enclosure Shapes 5 Super Gutter 200-WH-062 White x 24 200-MB-062 Bronze x 24 200-WH-063 White x 30 200-MB-063 Bronze x 30 200-WH-078 White x 40' 200-MB-078 Bronze x 40' 7 Super Gutter 200-WH-025 White x 24 200-MB-025 Bronze x 24 200-WH-026 White x 30 200-MB-026 Bronze x 30 200-WH-111 White x 40' 200-MB-111 Bronze x 40' 5 Super Gutter Brace x 12 200-MF-004 Mill Finish Florida items are available to all branches via shuttle. 2 x 4 Self Mating Beam 200-WH-040 White x 18 200-MB-040 Bronze x 18 200-WH-041 White x 20 200-MB-041 Bronze x 20 200-WH-077 White x 24 200-MB-077 Bronze x 24 200-WH-042 White x 30 200-MB-042 Bronze x 30 2 x 5 Self Mating Beam 200-WH-043 White x 18 200-MB-043 Bronze x 18 200-WH-044 White x 20 200-MB-044 Bronze x 20 200-WH-074 White x 22 200-MB-074 Bronze x 22 200-WH-045 White x 24 200-MB-045 Bronze x 24 200-WH-046 White x 26 200-MB-046 Bronze x 26 2 x 6 Self Mating Beam 200-WH-047 White x 18 200-MB-047 Bronze x 18 200-WH-048 White x 20 200-MB-048 Bronze x 20 200-WH-049 White x 22 200-MB-049 Bronze x 22 200-WH-050 White x 24 200-MB-050 Bronze x 24 200-WH-051 White x 26 200-MB-051 Bronze x 26 2 x 7 Self Mating Beam 200-WH-052 White x 18 200-MB-052 Bronze x 18 200-WH-053 White x 20 200-MB-053 Bronze x 20 200-WH-054 White x 22 200-MB-054 Bronze x 22 200-WH-055 White x 26 200-MB-055 Bronze x 26 200-WH-109 White x 30 200-MB-109 Bronze x 30 2 x 8 Self Mating Beam 200-WH-056 White x 18 200-MB-056 Bronze x 18 200-WH-057 White x 20 200-MB-057 Bronze x 20 200-WH-069 White x 22 200-MB-069 Bronze x 22 200-WH-058 White x 24 200-MB-058 Bronze x 24 200-WH-059 White x 28 200-MB-059 Bronze x 28 200-WH-060 White x 30 200-MB-060 Bronze x 30 200-WH-061 White x 32 200-MB-061 Bronze x 32 2 x 9 Self Mating Beam 200-WH-090 White x 22 200-MB-090 Bronze x 22 200-WH-091 White x 24 200-MB-091 Bronze x 24 200-WH-092 White x 28 200-MB-092 Bronze x 28 200-WH-093 White x 30 200-MB-093 Bronze x 30 200-WH-094 White x 32 200-MB-094 Bronze x 32 2 x 10 Self Mating Beam 200-WH-095 White x 24 200-MB-095 Bronze x 24 200-WH-096 White x 28 200-MB-096 Bronze x 28 200-WH-097 White x 30 200-MB-097 Bronze x 30 200-WH-098 White x 32 200-MB-098 Bronze x 32 200-WH-099 White x 36 200-MB-099 Bronze x 36 3 x 9 Unilock Slot Beam x 30 52-WH-2930N White 52-MB-2930N Bronze Hurricane Rated; Can be used for "picture view" screen applications. 2-1/4 x 2 Heavy Channel x 12 200-WH-103 White 200-MB-103 Bronze Architectural 17 website: www.easternmetal.com e-mail: info@easternmetal.com version: 10/20/17

Screen Room Enclosure Shapes Painted Flat Bar - 6005A T61 200-WH-030.125 x 2 x 20 White 0.300 200-MB-030.125 x 2 x 20 Bronze 0.300 Square Aluminum Painted Tube - 6063-T6 19-WH-003 3 x.093 x 24' White 1.298 19-MB-003 3 x.093 x 24' Bronze 1.298 200-WH-027 3 x.093 x 30' White 1.298 200-MB-027 3 x.093 x 30' Bronze 1.298 19-WH-225 3 x.125 x 20' White 1.726 19-WH-220 3 x.125 x 24' White 1.726 19-MB-235 3 x.125 x 24' Bronze 1.726 19-IV-235 3 x.125 x 24' Ivory 1.726 19-BG-235 3 x.125 x 24' Beige 1.726 19-BK-235 3 x.125 x 24' Black 1.726 19-COLOR-240 3 x.250 x 24 ** 3.300 52-COLOR-4424 3.50 x.125 x 24' ** 2.024 19-WH-245 4 x.125 x 20 White 2.325 19-WH-400 4 x.125 x 24' White 2.325 19-MB-246 4 x.125 x 24' Bronze 2.325 19-IV-400 4 x.125 x 24' Ivory 2.325 19-BG-400 4 x.125 x 24' Beige 2.325 19-BK-400 4 x.125 x 24' Black 2.325 200-WH-028 4 x.125 x 30' White 2.325 200-MB-028 4 x.125 x 30' Bronze 2.325 19-WH-2500 4 x.250 x 20 White 4.500 19-MB-2500 4 x.250 x 24 Bronze 4.500 19-IV-2500 4 x.250 x 24 Ivory 4.500 19-BG-2500 4 x.250 x 24 Beige 4.500 19-WH-2501 4 x.250 x 24 6 White 4.500 Painted Architectural Angle - 6063-T6 Equal Leg 11-WH-220 1 x 1 x.062 x 20' White 0.144 11-MB-220 1 x 1 x.062 x 20' Bronze 0.144 11-IV-220 1 x 1 x.062 x 20' Ivory 0.144 11-BG-220 1 x 1 x.062 x 20' Beige 0.144 11-WH-222 1 x 1 x.125 x 20' White 0.276 11-MB-200 1 x 1 x.125 x 20' Bronze 0.276 11-IV-200 1 x 1 x.125 x 20' Ivory 0.276 11-BG-200 1 x 1 x.125 x 20' Beige 0.276 11-WH-210 1.50 x 1.50 x.125 x 20' White 0.431 11-MB-210 1.50 x 1.50 x.125 x 20' Bronze 0.431 11-IV-210 1.50 x 1.50 x.125 x 20' Ivory 0.431 11-BG-210 1.50 x 1.50 x.125 x 20' Beige 0.431 1 Picket x 23 (HR-5) HR-5-WH White HR-5-BR Bronze HR-5-MF (TX) Mill Finish HR-5-BK Black x 23 6 1" Oval Picket MILL ORDER 52-63-12344 3/4 Picket x 19 1 (HR-13) HR-13-WH-1 White HR-13-BR-1 Bronze HR-13-BK Black HR-13-WH White x 22 5 HR-13-BR Bronze x 22 5 Florida items are available to all branches via shuttle. 51-63-544 2 x 2 x.093 x 20' White 0.440 51-63-543 2 x 2 x.093 x 20' Bronze 0.440 52-63-013 2 x 2 x.093 x 20' Ivory 0.440 52-63-5804A 2 x 2 x.093 x 24' 3 White 0.440 52-63-5806A 2 x 2 x.093 x 24' 3 Bronze 0.440 11-COLOR-376 2 x 2 x.125 x 20' ** 0.581 11-WH-325 2 x 2 x.250 x 20' White 1.124 11-WH-300 3 x 3 x.250 x 20' White 1.725 Painted Architectural Angle - 6063-T6 Unequal Leg 11-WH-365 1 x 2 x.062 x 20' White 0.218 11-MB-365 1 x 2 x.062 x 20' Bronze 0.218 11-IV-365 1 x 2 x.062 x 20' Ivory 0.218 11-BG-365 1 x 2 x.062 x 20' Beige 0.218 51-63-671 1 x 2 x.093 x 16' White 0.324 51-63-672 1 x 2 x.093 x 16' Bronze 0.324 11-WH-370 1 x 2 x.125 x 20' White 0.431 11-MB-370 1 x 2 x.125 x 20' Bronze 0.431 11-IV-370 1 x 2 x.125 x 20' Ivory 0.431 11-BG-370 1 x 2 x.125 x 20' Beige 0.431 11-COLOR-372 1 x 3 x.062 x 20' ** 0.293 11-WH-375 1 x 3 x.125 x 20' White 0.582 11-MB-375 1 x 3 x.125 x 20' Bronze 0.582 11-IV-375 1 x 3 x.125 x 20' Ivory 0.582 11-BG-375 1 x 3 x.125 x 20' Beige 0.582 51-63-518 1.50 x 3 x.093 x 20' White 0.492 51-63-519 1.50 x 3 x.093 x 20' Bronze 0.492 51-63-878 1.50 x 3 x.093 x 20' Ivory 0.492 51-63-884 1.50 x 3 x.093 x 20' Beige 0.492 52-63-8058 1.75 x.632 x.090 x 24 3 White 0.247 11-WH-390 2 x 3 x.125 x 20' White 0.750 11-MB-380 2 x 3 x.125 x 20' Bronze 0.750 11-IV-380 2 x 3 x.125 x 20' Ivory 0.750 11-BG-380 2 x 3 x.125 x 20' Beige 0.750 11-WH-395 2 x 3 x.250 x 20' White 1.425 11-COLOR-400 2 x 4 x.125 x 20 ** 0.881 11-WH-396 2 x 4 x.250 x 20' White 1.725 1-WH-410 2 x 5 x.125 x 20' ** 1.031 11-MB-410 2 x 5 x.125 x 20' ** 1.031 11-IV-410 2 x 5 x.125 x 20' ** 1.031 11-BG-410 2 x 5 x.125 x 20' ** 1.031 11-COLOR-413 2 x 5 x.190 x 20' (inside radius)** 1.568 11-WH-412 2 x 5 x.250 x 20' White 2.024 **COLOR - Available in: White (WH), Bronze (MB), Ivory (IV), Beige (BG) 3/4" Picket w/.120 radius (HR-13R) HR-13R-WH20 White x 20 HR-13R-BR20 Bronze x 20 HR-13R-WH (MO) White x 24 HR-13R-BR (MO) Bronze x 24 Please see the Fence, Railing & Castings section for the complete line of Mechanical Railing shapes. Hard-Rok 61-00-007 Contains no gypsum or chlorides; Quick setting anchoring cement; Available in 5 Gallon Buckets Architectural 18 Quik Rok 61-00-001 Anchoring Cement 5 Gallon Bucket NEVER to be used to anchor balcony railing or any similar human life safety structures website: www.easternmetal.com e-mail: info@easternmetal.com version: 10/20/17

Engineered Window Mullion and Clip Extrusions Our mullions can be used with any Approved Fenestration Product, under separate approval. Florida Building Code Approved by Engineering - Tube Mulls: 16051.2 Bay/Bow Mulls: 16051.1 22.5 6 Mullion x 24 54306-MBP-1 Bronze 54306-WHP-1 White 45 6 Mullion x 24 54308-MBP-1 Bronze 54308-WHP-1 White 90 6 Mullion x 24 54307-MBP-1 Bronze 54307-WHP-1 White 1 x 3-1/8 Mullion Clip x 12 54316-63-1 Mill Finish Mates with 1 x 3-1/8 Mullions Fabbed for 1 x 3-1/8 Light Mullion 80000 x 2-1/4 (6 holes) Fabbed for 1 x 3-1/8 Heavy Mullion 80001 x 1-3/4 (6 holes) 1 x 4 Mullion Clip x 12 54442-63-1 Mill Finish Mates with 1 x 4 Mullion Fabbed for 1 x 4 Mullion 80009 x 3-3/8 (8 holes) 1 x 3-1/8 Mullion U-Clip x 12 52-63-11886 Mill Finish Mates with 1 x 3-1/8 Mullions Fabbed for 1 x 3-1/8 Light Mullion 80008 x 2-1/4 (3 holes) Fabbed for 1 x 3-1/8 Heavy Mullion 80007 x 1-3/4 (3 holes) 2 x 4 x 1/8 Angle L-Clip x 20 11-63-395 Mill Finish Mates with 2 x 4 Mullion Fabbed for 22.5 Mullion; 45 Mullion; 90 Mullion 80006 x 2-3/4 (4 holes) Fabbed for 1 x 4 Mullion; 2 x 4 Mullion 80004 x 3-3/8 (4 holes) Fabbed for 2 x 6 Mullion 80005 x 5-3/8 (4 holes) 2 x 5 x 1/8 Angle L-Clip x 20 11-63-405 Mill Finish Fabbed for 1 x 3-1/8 Light Mullion 80002 x 2-1/4 (3 holes) Fabbed for 1 x 3-1/8 Heavy Mullion 80003 x 1-3/4 (3 holes) Non-Engineered Window Mullion and Clip Extrusions 1 Clip x 12 52-63-8745 Inserts into 20-WH/MB-2320 and 20-WH/MB-2350 2 Clip x 12 52-63-8746 Inserts into 2 Rect Tube (.125 Wall) 2 Clip x 12 52-63-11885 Inserts into a 2 Rect Tube (.250 wall) 1 Inside U-Clip x 12 52-63-11886 Inserts into 1 Rect Tube (.125 Wall) 1 x 2-3/4 Mullion Bars x 24 Wall:.375/.125 20-MB-2320 20-WH-2320 Bronze White 2 Inside U-Clip x 12 52-63-11887 Inserts into 2 Rect Tube (.125 Wall) 1 x 4 Mullion Bars x 24 Wall:.375/.125 20-MB-2350 20-WH-2350 Bronze White Architectural 20 Additional Painted Bars on Standards p36 website: www.easternmetal.com e-mail: info@easternmetal.com version: 08/01/16