ORGA-LINE for DYNAMIC SPACE. The UK Stock programme (Issue 4)

ORGA-LINE for DYNAMIC SPACE The UK Stock programme (Issue 4)

The Basics ORGA-LINE consists of a range of components and division elements designed for fitting inside the TANDEMBOX plus drawer system. Blum UK stock a comprehensive range of drawers and pull-outs for both lay-on and internal applications. By using the right drawers with the right combination of ORGA-LINE elements it is possible to create cabinets that conform to the DYNAMIC SPACE concept. The UK TANDEMBOX plus programme: Standard M height lay-on drawers These are most commonly used for storage of cutlery, odds and ends and cooking/preparation utensils: Stock availability: Finishes; Metallic grey and stainless steel Lengths; 270mm, 350mm, 400mm, 450mm, 500mm, 550mm & 650mm Carrying capacities; 30Kg, 50Kg & 65kg options available back widths (to suit 8mm carcase end panels); 300mm, 400mm, 450mm, 500mm, 600mm, 800mm, 900mm & 000mm Instead of steel backs it is also possible to use back fixing brackets for 6mm thick MFC backs. Cover cap options; Quadrangle with triangulated end (standard), rectangular (optional) or either version printed with logo (optional and 6 weeks lead-time) Front bracket options; Screw-on, knock-in (0mm dowels) or INSERTA (requiring 0mm dia. Drilling) TANDEMBOX M height lay-on drawer: TANDEMBOX M height lay-on drawer components: 4 3 2 6 5 2

The UK TANDEMBOX plus programme: Standard M height inner drawers These drawers have been designed so that the runner positions and base/back dimensions are the same as the lay-on drawer. This means that there is no need to set back runners or add spacers. Likewise most ORGA- LINE options remain the same for both lay-on and inner drawers. Construction of the sides, base and back is the same for inner drawers manufacturers simply replace the lay-on front fixing brackets with an inner drawer front (which for most sizes is supplied pre-assembled) These drawers can be used in many applications including; Larder Unit (in conjunction with Blum s special nil protrusion hinges) and behind high drawer fronts (either connected with a latch or free running) Stock availability: Finishes; Metallic grey and stainless steel Lengths; 270mm, 350mm, 400mm, 450mm, 500mm, 550mm & 650mm Carrying capacities; 30Kg, 50Kg & 65kg available back widths (to suit 8mm carcase end panels); 300mm, 400mm, 450mm, 500mm, 600mm, 800mm, 900mm & 000mm Instead of steel backs it is also possible to use back fixing brackets for 6mm thick MFC backs. Pre-assembled inner drawer fronts: Cabinet Part No. Cabinet Part No. width width 300mm ZIS.76M0 400mm ZIS.276M0 450mm ZIS.326M0 500mm ZIS.376M0 600mm ZIS.476M0 800mm ZIS.676M0 900mm ZIS.776M0 000mm ZIS.876M0 NB: For all other widths the components can be supplied for cutting and self assembly. Z3A08A - inner front section for cutting ZIF.70M0 - M height inner front bracket set ZIF.7005 - Handle (optional) ZIF.7007 - Handle & latch (optional) TANDEMBOX M height inner drawer: TANDEMBOX M height inner drawer components: Cover cap options; Quadrangle with triangulated end (standard), rectangular (optional) or either version printed with logo (optional and 6 weeks lead-time) 3

The UK TANDEMBOX plus programme: D height lay-on pull-outs These high fronted pull-outs can be used to store; crockery, provisions, pots, pans, plastic containers, mixing bowls, baking trays, bottles, packets, small electrical appliances and much much more. Stock availability: Finishes; Metallic grey and stainless steel Lengths; 400mm (excluding BOXSIDE), 450mm, 500mm, 550mm & 650mm Carrying capacities; 30Kg, 50Kg & 65kg options available back widths (to suit 8mm carcase end panels); 300mm, 400mm, 450mm, 500mm, 600mm, 800mm, 900mm & 000mm Instead of steel backs it is also possible to use back fixing brackets for 6mm thick MFC backs. BOXSIDE The essential component: BOXSIDE clips firmly onto the gallery (without the need for tools) and fills the space between the rail and the drawer side. This prevents stored goods from escaping and transforms the visual appeal of the drawer by giving the impression of a solid high side. Most importantly BOXSIDE is an essential component when using ORGA-LINE. The perforations on the inside face of BOXSIDE are used to connect the cross s. These cross s form the basis of nearly every ORGA-LINE variant for high fronted pull-outs. DYNAMIC SPACE will not work without BOXSIDE. BOXSIDE part nos: Drawer length Met. Grey St. 450mm Z37H48S Z37H48I 500mm Z37H468S Z37H468I 550mm Z37H58S Z37H58I 650mm Z37H68S Z37H68I TANDEMBOX D height lay-on drawer: TANDEMBOX D height lay-on drawer components: Cover cap options; Quadrangle with triangulated end (standard), rectangular (optional) or either version printed with logo (optional and 6 weeks lead-time) 6 5 Front bracket options; Screw-on, knock-in (0mm dowels) or INSERTA (requiring 0mm dia. Drilling) 4 3 4 3 2 2 4

The UK TANDEMBOX plus programme: D height inner pull-outs These drawers have been designed so that the runner positions and base/back dimensions are the same as the lay-on drawer. This means that there is no need to set back runners or add spacers. Likewise all BOXSIDE and ORGA-LINE options for the lay-on drawers are the same when using inner drawers. Construction of the sides, galleries, base and back is identical for inner drawers manufacturers simply replace the lay-on front fixing brackets with an inner drawer front (which for most sizes is supplied pre-assembled) These drawers can be used in many applications including; Larder Unit (in conjunction with Blum s special nil protrusion hinges) and behind doors and high drawer fronts. Stock availability: Finishes; Metallic grey and stainless steel Lengths; 400mm (without BOXSIDE), 450mm, 500mm, 550mm & 650mm Carrying capacities; 30Kg, 50Kg & 65kg options available back widths (to suit 8mm carcase end panels); 300mm, 400mm, 450mm, 500mm, 600mm, 800mm, 900mm & 000mm Instead of steel backs it is also possible to use back fixing brackets for MFC backs. BOXSIDE: see previous table for part numbers Pre-assembled inner drawer fronts: Cabinet Part No. Cabinet Part No. width width 300mm ZIS.76D2 400mm ZIS.276D2G 450mm ZIS.326D2G 500mm ZIS.376D2G 600mm ZIS.476D2G 800mm ZIS.676D2G 900mm ZIS.776D2G 000mm ZIS.876D2G TANDEMBOX D height inner drawer: TANDEMBOX D height inner drawer components: NB: For all other widths the components can be supplied for cutting and self assembly. Z3A08A - inner front section for cutting ZIF.73D0 - D height inner front bracket set ZRG.094U - gallery rail for cutting ZIF.7008 - D height inner drawer handle Cover cap options; Quadrangle with triangulated end (standard), rectangular (optional) or either version printed with logo (optional and 6 weeks lead-time) 5

www.dynamicspace.com Time for essential values Set new standards for working in your kitchen. ORGA- LINE, the adjustable inner dividing system for drawers and pull-outs with double walled BOXSIDE, provides the perfect solution. Organise your storage space to meet individual needs using the adjustable ORGA- LINE system. Profit from interior organisation that is customised to the items being stored while, emphasising beauty, quality and durability at the same time. The advantages of ORGA-LINE at a glance: Optimal storage space utilisation, customised to the item(s) being stored Complete sets make selection and ordering easier Special carcase widths provide flexible design options boxes and nylon parts that are durable and easy-to-clean Sets can be customised Can also be used with inner drawers and/or inner pull-outs Award-winning design 6

DYNAMIC SPACE More fun in the kitchen What should the kitchen standard be? Our DYNAMIC SPACE initiative looks into this question. Our goal: More storage space and improved quality of motion for a new kitchen standard. If the planning in 5 zones rule is applied then you get to keep the fun and lose the hassle. This is what DYNAMIC SPACE can do for you: Ample, well-organised storage space using adjustable ORGA-LINE inner dividing systems Well-organised work flows using 5 zone planning Improved ergonomics using pull-outs/drawers instead of shelves in the base cabinet Optimal access and overview using full extensions and ORGA-LINE inner s Improved quality of motion when opening and closing Consumables zone Provisions such as noodles/pasta, flour, rice, semolina and cocoa are stored in the Consumables kitchen zone, which also encompasses the refrigerator and freezer. Non - Consumables zone Utensils that are used on a daily basis are placed in the Non-consumables kitchen zone. Things that are used on a daily basis include dishes, glasses, cutlery as well as empty plastic containers. Cleaning zone The sink and dishwasher form the centre of the Cleaning kitchen zone. This is the perfect location for both cleaning utensils and waste storage/separation. ORGA-LINE for: Kitchen supplies ORGA-LINE for: Cutlery Odds and ends Plates & crockery Empty plastic containers Cleaning utensils Cleaning materials Waste storage/separation Preparation zone The Preparation kitchen zone is the main work area of the kitchen. Meals are prepared here. Kitchen utensils, knives, electric appliances, spices as well as many other items need to be kept close to the work area. ORGA-LINE for: Kitchen utensils, knives, small electric appliances Open provisions Spices Bottles Bottles and Cutting boards Bottles and provisions Cooking zone The Cooking zone is arranged around the hob and oven. This area is the best place for cooking and baking ingredients, pots, cooking utensils and baking sheets. 7 ORGA-LINE for: Cooking utensils Pots, lids, pans and cooking utensils Baking ingredients Baking trays and baking ware

ORGA-LINE for Provisions The storage space in pull-outs as well as the corner cabinet area can be properly organised using adjustable cross and lateral s. Provisions are well organised, won t tip over and are easily accessible. A quick look in the larder unit is all you need to make your shopping/grocery list. Recommended number of cross and lateral s Nominal length [mm] Standard carcase widths: Special carcase widths / SPACE CORNER: [mm] 300 400 450 500 550 600 650 2 x cross Cross cut to size Cross for cutting to size 450 300 mm 400 mm 600 mm 800 mm 900 mm.000 mm Z40H77S Z40H277S Z40H327S Z40H377S Z40H477S Z40H677S Z40H777S Z40H877S Z40H77I Z40H277I Z40H327I Z40H377I Z40H477I Z40H677I Z40H777I Z40H877I Cutting: white, grey or Internal carcase width 9 mm nickel plated Length 077 mm Z40H077A Cross connector RAL 7037 dust grey nylon 2 pcs. per cross Z40H000A 00 500 550 600 800 900.000.200 Special carcase widths SPACE CORNER 2 x cross 3 x lateral s 2 x cross 6 x lateral s Cross for cutting to size (quantity see above) x cross cut to size 2 x cross connectors 2 x lateral s Lateral Lateral Dimension calculation: Length 00 mm Z43H00S Z43H00I 28 Length 00 mm Z43H00S Z43H00I 28 Nominal length Inner carcase width 8

ORGA-LINE for cutlery High-quality ORGA-LINE sets with dishwasher safe, stainless steel compartments provide proper organisation for your cutlery. The individual cutlery containers can be laid out to suit your requirements and they are removable practical for buffets or garden parties. Please note all images of cutlery/utensil trays excluding the SPACE CORNER show the 500, the layout for 450 may differ slightly. For specific images of 450 please contact your normal Blum supplier. Nominal length Part no. 275 mm ZSI.450BIN ZSI.500BIN Nominal length Part no. Nominal length Part no..000 mm ZSI.50VEI4 ZSI.0VEI4 ZSI.50VEI6 ZSI.0VEI6 300/350 mm 600 mm 2 x 2 x ZSI.450BIN ZSI.500BIN ZSI.60VEI4 ZSI.60VEI6 SPACE CORNER Installation dimension 900.200 mm 650 mm ZSI.500BI3E 400 mm 800 mm ZSI.450BI3N ZSI.500BI3 ZSI.80VEI4 ZSI.80VEI6 900.200 ZSI.45VEI4 ZSI.45VEI6 900 mm ZSI.90VEI4 ZSI.90VEI6 9

ORGA-LINE for odds and ends A drawer for all kinds of odds and ends is essential for a kitchen. Each item and utensil is stored properly in durable stainless steel boxes. Pencils, papers or paper clips everything is stored neatly and close to hand when needed. Please note all images of cutlery/utensil trays excluding the SPACE CORNER show the 500, the layout for 450 may differ slightly. For specific images of 450 please contact your normal Blum supplier. Nominal length Part no. 275 400 mm ZSI.450BIN ZSI.500BIN Nominal length Part no. 800 mm ZSI.80VUI4 ZSI.80VUI6 SPACE CORNER Installation dimension 900.200 mm Part no. 650 mm ZSI.500FI3 900.200 450 550 mm ZSI.450FI2N ZSI.500FI2N 900 mm ZSI.90VUI4 ZSI.90VUI6 600 mm ZSI.60VUI4 ZSI.60VUI6.000 mm ZSI.0VUI4 ZSI.0VUI6 0

ORGA-LINE for plates and crockery Storing plates and crockery in a full extension drawer? The ORGA-LINE plate holder makes this ergonomic solution possible even for corner cabinet areas. Up to 2 plates can be securely stored in each plate holder (no tipping or sliding). They are easy to remove and transport. Setting a large table becomes a snap. Standard / Special carcase widths/ SPACE CORNER: Plate holder Plate diameters: Overall height: Stacking height of plates: RAL 7037 dust grey Nylon ZTH.0350 2 80-320 mm 7 mm 44 mm Recommended quantity for the high fronted pull-out (valid for nominal lengths 450 650 mm): Starting with carcase width: 600 mm 800 mm.000 mm 2 pcs. 4 pcs. 6 pcs. (NB length 4 pieces Recommended quantity for SPACE CORNER: Up to installation dimension: Starting with install. dimension:.050 mm.050 mm 2 pcs. 3 pcs.

ORGA-LINE for plastic containers With ORGA-LINE, the search for the right container and lid is over. Using a practical full extension drawer, you can see all containers at a glance even into the farthest corner. Cross and lateral s provide organisation, with lids simply being stacked neatly on end. Recommended number of cross and lateral s Nominal length [mm] 450 500 550 600 650 Standard carcase widths: Special carcase widths / SPACE CORNER: [mm] 300 400 x cross Cross cut to size Cross for cutting to size 450 300 mm Z40H77S Z40H77I 400 mm Z40H277S Z40H277I Z40H327S Z40H327I Z40H377S Z40H377I 600 mm Z40H477S Z40H477I 800 mm Z40H677S Z40H677I 900 mm Z40H777S Z40H777I.000 mm Z40H877S Z40H877I Cutting: white, grey or Internal carcase width 9 mm nickel plated Length 077 mm Z40H077A Cross connector RAL 7037 dust grey Nylon 2 pcs. per cross Z40H000A 00 500 550 600 800 900.000.200 Special carcase widths SPACE CORNER x cross 2 x lateral s x cross 3 x lateral s Cross for cutting to size (quantity see above) x cross cut to size 2 x cross connectors 2 x lateral s Lateral Lateral Dimension calculation: Length 00 mm Z43H00S Z43H00I 28 Length 00 mm Z43H00S Z43H00I 28 Nominal length Inner carcase width 2

ORGA-LINE for cleaning utensils Cleaning utensils should ideally be stored in the pull-out directly under the sink. The space to the right and left of the sink bowl is fully exploited. Dish soap, sponge and brush are always readily to hand. No more lengthy searching with wet hands. Standard / Special carcase widths: Cross for cutting to size Cross connector Cutting: Base width (BB) 6 mm Length 077 mm (BB) white, grey or nickel plated Z40H077A RAL 7037 dust grey Nylon 2 pcs. per cross Z40H000A 00 We recommend using two cross s per side. NB - Special components are required for the TANDEMBOX sink drawer - please contact your Blum supplier for details. 3

ORGA-LINE for household cleaning utensils An inner drawer in the lower sink cabinet provides additional organisation. Using an ORGA-LINE inner dividing system, you can properly store cleaning utensils such as sponges, kitchen towels or rubbish bags. The individual containers are made from stainless steel making them dishwasher safe and very easy to clean. Please note all images of cutlery/utensil trays show the 500, the layout for 450 may differ slightly. For specific images of 450 please contact your normal Blum supplier. Nominal length Part no. 600 mm ZSI.60VUI4 ZSI.60VUI6.000 mm Nominal length Part no. ZSI.0VUI4 ZSI.0VUI6 800 mm ZSI.80VUI4 ZSI.80VUI6 900 mm ZSI.90VUI4 ZSI.90VUI6 4

ORGA-LINE for waste/recycling and cleaning materials The sink base unit contains the most frequently used kitchen pull-out because this is where the rubbish/recycling containers are located. For this reason, easy accessibility and secure storage as well as cleanliness are very important. Cleaning materials are stored hygienically in the ORGA-LINE bottle holder and kept separate from the recycling/rubbish holders via a dividing wall. Now rubbish separation can be done with no mess and no fuss. Standard and special carcase widths starting at 800 mm: Bottle set Dividing wall (additional) Nominal Length ZFI.30BZS4N ZFI.30BZI4N ZFI.30BZS6N ZFI.30BZI6N Nominal Length Z46C420S Z46C420I Z46C470S Z46C470I 8 8 You will require an additional dividing wall for carcase widths 900 mm and higher. 5

ORGA-LINE for kitchen utensils, knives and small electrical appliances ORGA-LINE inner dividing systems provide organisation and secure storage for drawers with kitchen utensils, knives and small electrical appliances. Everything that you could need for preparing meals is securely stored here. The ORGA-LINE knife holder safely stores up to nine knives of different sizes. Even large knives with heavy handles are held firmly in place thanks to the handle support. Please note all images of cutlery/utensil trays excluding the SPACE CORNER show the 500, the layout for 450 may differ slightly. For specific images of 450 please contact your normal Blum supplier. Nominal length Part no. 275 300 mm ZSI.450BIN ZSI.500BIN 800 mm Nominal length Part no. ZSI.80VUI4 ZSI.80VUI6 SPACE CORNER Installation dimension 900.200 mm Part no. 650 mm ZSI.500FI3 900.200 400-550 mm ZSI.450FI2N ZSI.500FI2N 900 mm ZSI.90VUI4 ZSI.90VUI6 Knife holder 77.5 600 mm ZSI.60VUI4 ZSI60VUI6 000 mm ZSI.0VUI4 ZSI.0VUI6 260 RAL 7037 dust grey Nylon ZSZ.02M0 6 Suitable for carcase widths 400 mm and higher. Can also be used in the utensil. NB - Special components are required for the front and rear elements of SPACE CORNER - please contact your Blum supplier for details.

ORGA-LINE for open provisions Opened packets of provisions such as flour, sugar and rice can be stored under the main work area. High cross and lateral s ensure that goods are held securely yet are easy to view and access. So when you need it, the right ingredient is close at hand. Recommended number of cross and lateral s Nominal length [mm] Standard carcase widths: Special carcase widths / SPACE CORNER: [mm] 300 400 450 500 550 600 650 2 x cross Cross cut to size Cross for cutting to size 450 300 mm 400 mm 600 mm 800 mm 900 mm.000 mm Z40H77S Z40H277S Z40H327S Z40H377S Z40H477S Z40H677S Z40H777S Z40H877S Z40H77I Z40H277I Z40H327I Z40H377I Z40H477I Z40H677I Z40H777I Z40H877I Cutting: white, grey or Internal carcase width 9 mm nickel plated Length 077 mm Z40H077A Cross connector RAL 7037 dust grey Nylon 2 pcs. per cross Z40H000A 00 500 550 600 800 900.000.200 Special carcase widths SPACE CORNER 2 x cross 3 x lateral s 2 x cross 6 x lateral s Cross for cutting to size (quantity see above) x cross cut to size 2 x cross connectors 2 x lateral s Lateral Lateral Dimension calculation: Length 00 mm Z43H00S Z43H00I 28 Length 00 mm Z43H00S Z43H00I 28 Nominal length Inner carcase width 7

ORGA-LINE for spices When preparing meals and cooking, the right spices/herbs should always be close at hand. The ORGA-LINE spice holder securely stores both small and large containers all within easy reach. An optional base stabilizer provides additional support in wider pull-outs. Recommended number of cross and lateral s The spice holder can be completely removed from the pull-out and set out on the work surface or carried to the table. It is also very easy to clean it s even dishwasher safe. Standard carcase widths: Special carcase widths: [mm] 300 400 Nominal length [mm] 450 500 550 600 650 x cross 2 x cross The spice holder 20 The spice holder 20 450 x cross 2 x lateral s 2 x cross 3 x lateral s B 72.5 300 mm 400 mm Width (B) 22 mm 32 mm 362 mm 2x 2x 2x ZFZ.30G0I ZFZ.40G0I ZFZ.45G0I 2 2 2 B 72.5 a. higher Width (B) 22 mm 32 mm 362 mm 2x ZFZ.30G0I 2x ZFZ.40G0I 2x ZFZ.45G0I 2 2 2 Special carcase widths Cross for cutting to size (quantity see above) Cross cut to size Cross for cutting to size 300 mm 400 mm Lateral Length 00 mm Z40H77S Z40H277S Z40H327S Z43H00S Z40H77I Z40H277I Z40H327I Z43H00I 28 Cutting: white, grey or Internal carcase width 9 mm nickel plated Length 077 mm Z40H077A Cross connector RAL 7037 dust grey Nylon 2 pcs. per cross Z40H000A Lateral (see standard carcase widths) 00 Dimension calculation: Nominal length Inner carcase width 8

ORGA-LINE for bottles The high fronted pull-out is especially well-suited for storing bottles of every size. Adjustable cross s ensure bottles are held securely in place. Easy access to oils, vinegar, marinades and dressings. The stainless steel drip tray is very easy to clean. Recommended number of cross s Nominal length [mm] [mm] 450 500 550 600 650 For standard carcase widths: 275 300 3 x cross s 4 x cross s 5 x cross s Drip tray Cross cut to size Nominal Length 300 mm Z48.30B0I4 Z48.30B0I6 4 4 300 mm Z40H77S Z40H77I Cross connector 2 pcs. per cross RAL 7037 dust grey Nylon Z40H000A 00 Dimension calculation: Nominal length Inner carcase width 9

ORGA-LINE for bottles and cutting boards The high pull-out can now also be adapted to store cutting boards along with bottles. This highly practical solution makes it easy to find the right cutting board and saves unnessary bending and stretching. If the contents of one of the bottles should leak then; no problem. The removable stainless steel tray of the ORGA-LINE set is very easy to clean. Standard carcase widths starting with 400 mm: Bottle set Dividing wall (additional) Nominal Length Nominal Length ZFI.30BZS4N ZFI.30BZI4N Z46C420S Z46C420I 8 ZFI.30BZS6N ZFI.30BZI6N Z46C470S Z46C470I 8 You will require an additional dividing wall for carcase Start. with carcase width: pcs. widths and higher. 600 mm 2 pcs. 20

ORGA-LINE for bottles and provisions Thanks to ORGA-LINE, provisions can now be organised alongside bottles in a pull-out. High side walls and adjustable cross and lateral s prevent bottles and provisions from falling over. The stainless steel drip tray makes cleaning child s play. Recommended number of cross and lateral s Nominal length [mm] [mm] 450 500 550 600 650 Special carcase widths starting with 900 mm: Special carcase widths Cross for cutting to size Bottle set Cross for cutting to size Nominal Length ZFI.30BZS4N ZFI.30BZS6N ZFI.30BZI4N ZFI.30BZI6N Cutting: white, grey or External cabinet width 352mm nickel plated Length 077 mm Z40H077A Cross connector RAL 7037 dust grey Nylon 2 pcs. per cross Z40H000A 00 Lateral Length 00 mm Z43H00S Z43H00I 28 Dimension calculation: Nominal length Inner carcase width 2

ORGA-LINE for cooking utensils Whether you are stirring soup or turning meat the tools you need should be close to hand in the cooking area. Using ORGA-LINE inner dividing systems, drawers under the hob are well organised providing quick access to the right utensil. Please note all images of cutlery/utensil trays show the 500, the layout for 450 may differ slightly. For specific images of 450 please contact your normal Blum supplier. Nominal length Part no. Nominal length Part no. 600 mm ZSI.60VUI4 ZSI.60VUI6.000 mm ZSI.0VUI4 ZSI.0VUI6 800 mm ZSI.80VUI4 ZSI.80VUI6 900 mm ZSI.90VUI4 ZSI.90VUI6 22

ORGA-LINE for pots, lids and cooking utensils Cooking items that are used on a regular basis should be kept near the oven and hob. With ORGA-LINE, you can organise the interior of your high fronted pull-out so that pots and lids are stored together. High back and side walls provide secure storage preventing pot handles from jutting out. Depending on the need, there is even further space for commonly-used cooking utensils. Recommended number of cross and lateral s [mm] Nominal length [mm] 450 500 550 600 650 Standard carcase widths: Cross cut to size 600 mm Z40H477S 800 mm Z40H677S 900 mm Z40H777S.000 mm Z40H877S Z40H477I Z40H677I Z40H777I Z40H877I Special carcase widths / SPACE CORNER: Cross for cutting to size Cutting: white, grey or Internal carcase width 9 mm nickel plated Length 077 mm Z40H077A Cross connector 600 800 900.000 Special carcase widths x cross 2 x lateral s x cross 3 x lateral s 2 x cross 3 x lateral s 2 x cross 6 x lateral s Cross for cutting to size (quantity see above) Lateral 2 pcs. per cross RAL 7037 dust grey Nylon Z40H000A 00 Length 00 mm Z43H00S Z43H00I Lateral Dimension calculation: Length 00 mm Z43H00S Z43H00I 28 Nominal length Inner carcase width 23

ORGA-LINE for baking ingredients Baking ingredients should be kept close to the oven and hob to save time and effort. All ingredients can be stored within easy reach in a spacious high fronted pull-out equipped with ORGA-LINE cross and lateral s. Recommended number of cross and lateral s Nominal length [mm] Standard carcase widths: Special carcase widths / SPACE CORNER: [mm] 300 400 450 500 550 600 650 2 x cross Cross cut to size Cross for cutting to size 450 300 mm 400 mm 600 mm 800 mm 900 mm.000 mm Z40H77S Z40H77I Z40H277S Z40H277I Z40H327S Z40H327I Z40H377S Z40H377I Z40H477S Z40H477I Z40H677S Z40H677I Z40H777S Z40H777I Z40H877S Z40H877I Cutting: Internal carcase width 87 mm Length 077 mm Cross connector 2 pcs. per cross white, grey or nickel plated Z40H077A RAL 7037 dust grey nylon Z40H000A 00 500 550 600 800 900.000.200 Special carcase widths 2 x cross 3 x lateral s 2 x cross 6 x lateral s Cross for cutting to size (quantity see above) Lateral Lateral Dimension calculation: Length 00 mm Z43H00S Z43H00I 28 Length 00 mm Z43H00S Z43H00I 28 Nominal length Inner carcase width 24

ORGA-LINE for baking trays and accessories Having baking ingredients nearby is only half the battle. You also need to have; baking trays, cake tins, accessories and utensils close to hand. These can be stored in an upright position in a high fronted pull-out using ORGA-LINE dividing walls. This saves space and improves accessibilty. Recommended for carcase widths 300 : Dividing wall Nominal Length Z46C420S Z46C470S Z46C420I Z46C470I 8 8 Start. with carcase width: 400 mm 2 pcs. 3 pcs. 25

ORGA-LINE sets for special carcase widths It is possible to customise drawers with special widths using ORGA-LINE modular sets. The customer has the option to integrate further accessories to drawers and pull-outs. (such as; the plate holder, knife holder and spice holder). New ORGA-LINE Accessories Kitchen Accessories Set Film / Foil holder & cutter Sets and accessories for drawers: Cutlery sets (B) Nom. length Part no. - 26 ZSI.450BIN ZSI.500BIN Part no. ZOU.30UI Film holder & cutter Part no. ZSZ.0F0 Set contains: - 26 ZSI.450BI3N ZSI.500BI3 x Knife holder x Film holder & cutter Foil holder & cutter - 26 ZSI.450FI3 ZSI.500FI3 x Foil holder & cutter 2x Spice rack ZSZ.02F0 (22 mm wide) 2x Plate holder 26

Reliable, safe, competent Blum is the reliable and competent partner for you: With the right products, useful services and experienced people. The wants and needs of our customers represent the driving force for our business. By engaging in dialogue together we discover new opportunities to perfect motion. In this way, we can optimise and upgrade our products and services for our customers around the globe thus benefiting everyone: Furniture manufacturers, furniture sellers, furniture installers and furniture buyers. Our long established philosophy is to provide real advantages to each of our customers (throughout the supply chain). Blum innovations have become milestones in furniture hardware manufacturing. Helping you to provide high quality furniture and inspiration for your customers, through a partnership of design and function. Our goal is to make opening and closing furniture a truly emotional experience. Perfecting motion is our motto. It incorporates everything that is the best about the Blum brand. 27

Blum UK Mandeville Drive Kingston, Milton Keynes GB-Buckinghamshire MK0 0AW Tel.: 0908 285700 Fax: 0908 285 70 E-mail: info.uk@blum.com Subject to technical modifications and changes to the range without notice. Printed in the U.K. IDNR: 200 6 57 2 Issue 4 0 / 0 Julius Blum GmbH Furniture Fittings Mfg. A-6973 Hoechst, Austria Tel.: +43/5578/705-0 Fax: +43/5578 /705-44 E-mail: info@blum.com www.blum.com www.dynamicspace.com by Blum