536 Item No. FD30UKP FD30URP FD30UMP FD30UP Application Standard Folding (One pivot fixed) Slidable (for partition use) Slidable (for cabinet use) Max. 450 mm (7-3/4") Height Max. 2400 mm (94-/2") Min. 30 mm ( -3/6") Weight Max. 5kg (33 lbs) per door panel FD30-F Swing + Parts Set (Per 2 doors) a b c d Qty No. a b c d 2 2 s s - 2 - - s 2-3 Necessary Parts Please refer to Qty a ~ d for parts included in each set. Item No. FD30UKP FD30URP FD30UMP FD30UP Upper Roller (Recessed Type) Upper Roller (Side-Mount) - - - Stopper Block Description Pivoted Folding, Center Hinge (Surface Mount) Slidable Folding, Center Hinge ( Edge Recessed Mount) Slidable Folding, Center Hinge (Back Side Recessed Mount) Pivoted Swing open (Single Panel) Parts Included Part Name / Item No. FD30-WRH FD30-WRU FD30-HSB Description Zinc Alloy / Polyacetal Chromate / Light Brown / Polyacetal Polyacetal Configuration Qty No. a b c d 9 0-2 - - - - - - 3 - - - Pivot Bracket (Bottom) Fixing Plate - Upper Stopper - Bottom Stopper Magnetic Catch Part Name / Item No. FD30-FPU FD30-FKK FD30-FTST FD30-FBKS FD30-FMC + Description Chromate Chromate / Polyacetal / Polyacetal / ABS Plastic 4 - - Bottom Pin FD30-FBP / Polyacetal Chromate / White 4 3 s - - - Center Hinge (Surface Mount, Angle adjustable) FD30-CHM Black 5-2 s 6 7 2 s - Guide Pin - - 8 - - - FD30-FGR / Polyacetal Chromate / White Pin Insert Jig FD30-FKPIJ Spanner Wrench FD30-FSP Top Bracket FD30-FSK Chromate 5 - - s 3-6 - s 3 - - Center Hinge (Recess Mount, Angle adjustable, W/Detent Stop) Center Hinge ( Edge Mount, Angle adjustable, W/Detent Stop) FD30-CHH FD30-CHK Black Zinc Alloy -800-562-5267
537 7 a Pivoted Folding, Center Hinge - Surface Mount 3 0 Necessary Parts Mounting Length Item No. Dimensions Material / Finish 90 mm FD30-TRM90SIL 8 Surface 8 mm FD30-TRM8SIL 9 Mount 2730 mm FD30-TRM2730SIL 3640 mm FD30-TRM3640SIL 2 90 mm FD30-TRH90SIL 22 Recessed 8 mm FD30-TRH8SIL 23 Mount 2730 mm FD30-TRH2730SIL 24 3640 mm FD30-TRH3640SIL No. Item No. Part Name Installation Description 33 FD30-WRH-CP 34 FD30-FMF End Cap (For Rollers) End Holder (Magnetic) Polypropylene Brown *For roller Polycarbonate Neodymium Optional Parts Bottom Guide Track 25 Necessary Parts *Must be ordered when using (7/6").9 (5/32") b c d Mounting Length Item No. Dimensions Material / Finish 90 mm FD30-FBRM90SIL 26 Floor 8 mm FD30-FBRM8SIL Surface 27 Mount 2730 mm FD30-FBRM2730SIL 28 3640 mm FD30-FBRM3640SIL 29 90 mm FD30-FBRH90SIL 30 Floor 8 mm FD30-FBRH8SIL Recessed 3 Mount 2730 mm FD30-FBRH2730SIL 32 3640 mm FD30-FBRH3640SIL 28 (-/8") 24 (5/6") No. Item No. Part Name Installation Description 35 FD30-FTF 36 FD30-FHL End Holder (Pin) Latch Unit Polyamide / White / Chromate Polyacetal *To be used when ordering c + d+ Center Hinge has angle adjustment, detent stop feature and mounted on surface at back side of door for easy installation. 4 4 9 Installation Example (In case of -9/6" thick, 7-3/4" wide door) Gap - and Frame Preparation 300 Gap total : C + E 350 400 450 30 4.0 7.5 7.0 6.7 6.4 35 5.2 9.5 8.9 8.5 8.2 40 6.5.7.0 0.5 0. -800-562-5267
538 b Slidable Folding, Center Hinge Edge Recessed Mount Center Hinge has angle adjustment, detent stop feature and mounted in recess at door edge which is invisible from both side. Detent center hinge allows the folding door to slide freely for easy access and to maximize the space. Preparation R8 58 (2-5/6") 7.5 (5/6") 25 (") Installation Example (In case of -9/6" thick, 7-3/4" wide door) E 0.8 Gap - and Frame D= C 300 Gap total : C + E 350 400 450 30 4.0 7.5 7.0 6.7 6.4 35 5.2 9.5 8.9 8.5 8.2 40 6.5.7.0 0.5 0. 4.3 05 32 (-/4") 32 (-/4") 8.5 +0-0.5 2 9.5.2 (50) 7±4 2 7±4 2 ±2 3 0 Middle between 2 hinges Bottom Guide Track (50) 0.4 0.5-800-562-5267
539 c Slidable Folding, Center Hinge Back Side Recessed Mount Center Hinge has angle adjustment, detent stop feature and mounted in recess at back side of door. Detent center hinge allows the folding door to slide freely for easy access and to maximize the space. Installation Example (In case of -9/6" thick, 7-3/4" wide door) Gap - and Frame 300 Gap total : C + E 350 400 450 30 3.6 6.0 5.7 5.5 5.3 35 5.8 8.8 8.4 8. 7.9 40 2.0 2.0.6.2.0-800-562-5267
540 d Pivoted Swing open (Single Panel) Preparation Preparation for counter plate Gap - and Frame (In Case D = 30) 30 4.0 35 5.2 40 6.5 D C 9.5 7±4 3.2 8.5 +0-0.5 7±4 3 2 5 4 37 46 29.7 29.7 40. 40. 4~8 Min.30 (-3/6") Bottom Guide Track 0.4 0.5-800-562-5267
54 Center Hinge - Details No. Item No. Installation Angle Adjustment Detent Surface Mount 4 37 angle FD30-CHM Back Side Recessed Mount 5 50 angle FD30-CHH Edge Recessed Mount 6 47 angle FD30-CHK Optional Parts - Details No. Part Name / Item No. Installation Specification Description 33 End Cap (For Rollers) Cover Cap for Upper Roller Polypropylene Brown FD30-WRH-CP 34 End Holder (Magnetic) Prevents door racking when door is closed, especially in double doors Polycarbonate Neodymium FD30-FMF 35 End Holder (Pin) Prevents door racking when door is closed, especially in double doors Polyamide / White / Chromate FD30-FTF 36 Latch Unit To hold the door close in [d] configuration, to be installed on bottom guide track Polypropylene Brown FD30-FHL -800-562-5267