Signage Support and Hanging Systems Complete solutions for suspending all types of signage and displays
Introduction The Gripple range of signage products has been developed to provide a complete solution for the suspension of all forms of signage. The variety of concepts allows for complete flexibility and adjustability, whilst meeting the demands of any job. The range of designs provide sleek, professional finishes for you and your clients, without compromising on strength. These products have been designed to save you time, labour and money by making the installation of signage much easier. With this range there is no need for preparation or additional tools. The kits delivered to you are complete installation solutions. Hanger range Gripple s traditional Hangers present ideal solutions to a variety of signage suspension needs. Up to 6 times faster to install than traditional hanging systems Versatile Simple to use Strong, safe and industry approved Aesthetically discreet and lightweight Supplied in ready-to-use kits, comprising a length of wire, pre-crimped end fixing, hanger and setting key 5:1 safety factor No.1 - SWL* 10 kg No.2 - SWL 45 kg No.3 - SWL 90 kg * SWL = Safe Working Load. Higher load ratings are available In store signage Box signage In store signage installation The Express No.1 The Express No.1 offers an instant locking solution to make hanging signs and displays even easier. It incorporates an integral release mechanism for convenience. Up to 6 times faster to install than traditional methods Keyless - no tool required for adjustment Ergonomic buttons allow rapid adjustment Discreet and aesthetic design XP1 load rated at 15 kg with a 5:1 safety factor Supplied as a ready-to-use kit Adjust / Release 2 1 Attach the end fixing to the substrate (see page 6 for detailed guidelines) Thread the wire through the hanger unit (see page 3 for detailed guidelines) Loop the wire through the sign Pass the wire back through the hanger unit Adjust to desired height and level the sign with ease units are installed differently to the above diagram, see page 4 for detailed guidelines. Hanger unit requires a key to release 2 www.gripple.com www.gripple.com 3
Left to Right: Central Exit M6 Male, Side Exit Hook, Side Exit Female M6 or M4, Y-Fit, Signage, Side Exit Male M6 The range is designed for suspending all types of signage. It has all the functional benefits of the pioneering Hanger suspension system, but with added beauty and sophistication. In addition, the range offers advanced ergonomics and improved safety. The sign can be positioned accurately and safely using the simple finger-friendly adjustment feature, located on the side of the unit for ease-of-use. Complementary, aesthetic design Easy, one-handed squeeze adjustment Bright plated finish Supplied in ready-to-use kits Available with a range of connector types and thread sizes Extensive ceiling fixing options available to suit most substrates Available in lengths up to 5 metres as standard Load rated at 15 kg with a 5:1 safety factor Catenary and C-Clip Create a secure overhead span between two support structures using Catenary wire; then using the Gripple C-Clip, an innovative twist-on device, suspend your signage from anywhere along the span. Allows horizontal and vertical adjustment Cams lock solidly in place even at angles up to 60 Ready-to-use kit Can be fitted retrospectively No tools needed Signage can be suspended where there are no available or existing anchor points Available in 3 mm and 6 mm wire rope diameters Visually discreet Advantages Signage Grub screw for direct attachment Easy to install Wire exits at the side Y-Fit Dual fixing points for balance 300 mm / 12 and 460 mm / 18 legs as standard Available with Toggle or Snap Hook end fixings Electrical display unit Internal signage C-Clip Directional store signage Retail decoration Hook Ideal for signage Wire exits at the side Safety clasp for security - Catenary Side Exit Wire exits at the side With M6 or ¼ male / female thread Other thread sizes and types available on request Store signage Site signage Release / Adjust - C-Clip 1 2 Alternative ceiling fixings available on request; see page 6. 4 www.gripple.com www.gripple.com 5
End fixings Accessories All signage kits come with one of the following pre-crimped end fixings, suitable for installation into any substrate (other end fixings are available, see our website or Industrial product guide for further details). To complement the signage product range. Wire Cutters Loop Ideal for looping around purlins, beams, roof trusses and other suitable building features Available up to 325 kg SWL, with a 5:1 safety factor Available in Stainless Steel Barrel Twister Ceiling Fixing Kit Available in a variety of sizes and models for attachment to beams and purlins Contact us for sizing and product code options How to work out your unique product code 1) Choose your kit type: (Input the code in the red area below) Hanger No.1 Hanger No.2 Hanger No.3 Express No.1 Signage Hook Y-Fit HF1 HF2 HF3 XP1 SQ1-S-SLOT5 SQ1-SH SQ1-YT300 Loop Stud M8 x 45 mm Snap Hook 90º Eyelet Bullet Barrel Barrel Magnetic Pad HG EY906G BB6 B6G MPG 2M 3M 4M 5M 10M 2) Choose your end fixing: (Input the code in the green area below) Ideal for anchoring into concrete ceilings Supplied with a Drop-In Anchor Available up to 225 kg SWL, with a 5:1 safety factor Comes as a ready-to-use kit with a length of wire Available in Stainless Steel 6 www.gripple.com S8G 3) Choose your wire length: Ideal for fixing into concrete, steel or wood using gas or power actuated tools or appropriate screws Easily attached to different substrates using screws Available up to 90 kg SWL, with a 5:1 safety factor Improves aesthetics Suitable for suspended ceilings Conceals the hanger installation Product code: CEILING-COVER Product codes LG Stud Attaches to ceiling grid For use with M6 Barrel end fixing Product code: T-BAR-CLIP-M6 Beams and Purlins Quick and easy attachment to cable basket, purlin clips, light fittings Available up to 90 kg SWL, with a 5:1 safety factor Available in Stainless Steel 90º Eyelet For use with 6 mm catenaries Tensions wire easily (up to 100 kg) Product code: CTI-6MM-TOOL Ideal for hanging signage and fixing services to ferrous metal surfaces Not for use on aluminium, brass or non-metallic products Load is affected by the metal thickness and the condition of the surface Snap Hook Tensioning Tool T-Bar Twist Clip Keeps tail wires neat and tidy For use with 2 mm / 3 mm wire Aesthetic finish Product code: TWIST-10BB Aesthetic fixing for use with any M6 or M8 threaded product Available up to 90 kg SWL, with a 5:1 safety factor Magnetic Pad For use when terminating wire to desired lengths Purpose made for use on 4 mm wire max Hardened jaws for durability Product code: CUTTER-GRIPPLE (Input the code in the blue area below) Bespoke lengths are available on request. 1M 4) Enter your unique product code: Section 1 Section 2 Section 3 For 3 mm Catenary kits use CTI-3MM-XXM, where XX is the required length. For 6 mm Catenary kits use CTI-6MM-XXM, where XX is the required length. Both our 3 mm C-Clip and 6 mm C-Clip can be ordered as an end fixing, using CC3 and CC6 alongside a choice of kit respectively. www.gripple.com 7
www.gripple.com info@gripple.com Gripple Ltd (Headquarters) The Old West Gun Works Savile Street East Sheffield S4 7UQ UK UK Sales : 0800 018 4264 Fax : +44 (0)114 275 1155 Email: info@gripple.com Gripple Europe SARL Gripple Inc Gripple Benelux Gripple Portugal 1, rue du commerce BP 37 67211 Obernai Cedex France 1611 Emily Lane Aurora IL 60502 USA 1, rue du commerce BP37 67211 Obernai Cedex Frankrijk Estrada Nacional 4 Km 46,5 Pontal 2985-201 Pegões Portugal T +33 (0)3 88 95 44 95 F +33 (0)3 88 95 08 78 E frinfo@gripple.com T +1 866 474 7753 F +1 800 654 0689 E usinfo@gripple.com T +31 (0)70 363 34 30 F +31 (0)70 362 18 44 E nlinfo@gripple.com T +351 265 898 870 F +351 265 898 879 E ptinfo@gripple.com Gripple GmbH Gripple s.r.l Gripple Industrial Ibérica, S.L. Gripple Australia / NZ Pariser Ring 1 76532 Baden-Baden Deutschland Via Ponte Pietra, 2 24123 Bergamo BG Italia Ctra. Logroño km 7, 3 Pol. Europa 1 50011 Zaragoza España Polyplas Pty Ltd, 30 Sydney Rd Bayswater, Victoria 3153 Australia T +49 (0)700 95 44 95 11 F +49 (0)700 95 08 78 11 E deinfo@gripple.com T +39 (0)35 300 246 F +39 (0)35 424 0036 E itinfo@gripple.com T +34 (0)97 678 32 67 F +34 (0)97 678 32 68 E esinfo@gripple.com T +61 (0)3 9720 0449 F +61 (0)3 9720 0469 E auinfo@gripple.com 2013 Gripple Gripple is a registered trademark of Gripple Limited, Company registered in England No. 1772901, VAT Reg No. GB 600 1951 88 BROC-IND-SIGN13-ENG