SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications for Lot B-2 Lot composition: Tender Additional Code Equipment Quantity quantity* B-2.01 Basins, washing newborn 2 0 B-2.02 Bassinets 26 0 B-2.03 Beds, Fixed, Cradle, Pediatric 18 0 B-2.04 Beds, Hydraulic, Articulated, 3 Sections 7 3 B-2.05 Beds, Hydraulic, Birthing 5 2 B-2.06 Beds, Mechanical, Articulated, 3 Sections 77 79 B-2.07 Carts, Anesthetist's, Resuscitation 3 1 B-2.08 Carts, Instrument, Countilever 3 4 B-2.09 Carts, Linen/Laundry, Dirty Laundry, 1 Bag 64 15 B-2.10 Carts, Medication 5 0 B-2.11 Carts, Resuscitation 9 0 B-2.12 Carts, Service/Utility 16 6 B-2.13 Carts, Surgical Case 8 2 B-2.14 Chair, breast feeding 6 0 B-2.15 Chairs, blood taking, high 2 0 B-2.16 Chairs, Commode 10 9 B-2.17 Chairs, Reclining, Patient Rest 18 2 B-2.18 Curtains, with supporting trucks 25 28 B-2.19 Intravenous Poles 62 45 B-2.20 Kick Buckets 4 6 B-2.21 Orthopedic External Fixation Systems 3 0 B-2.22 Resuscitators, Pulmonary, Manual 1 0 B-2.23 Screens, Bedside, Triple 18 54 SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 1 of 36
B-2.24 Stretchers, Mobile, Hospital 9 6 B-2.25 Table, Laundry, Small 2 2 B-2.26 Tables, CSSD, Inspection, Light 1 0 B-2.27 Tables, Examination/Treatment, Adjustable 1 0 B-2.28 Tables, Examination/Treatment, Fixed 16 11 B-2.29 Tables, Gynecologic Examination/Treatment 1 0 B-2.30 Tables, Overbed, Fixed Height 69 51 B-2.31 Tables, Stainless Steel, CSSD 3 2 B-2.32 Tables, Workstation, CSSD, Packaging Shelves 1 0 B-2.33 Wheelchairs, Mechanical, Adult 9 2 *Additional quantity that may be required during the extended Bid validity according with the Tender document section: BDS 13.1. The Bidders or each Manufacturer shall be ISO9001 Certified. The manufacturer of B-2.11 and B-2.22 shall be also ISO13485 certified. Copy of the above mentioned ISO9001 and ISO13485 certifications shall be included in the offer. Some of the following specifications are composed by a text and a picture, both are describing the item. In case of discordance text prevails on picture. The pictures have to be intended as representations of the technological level, the design quality and the construction specifications of the items and not referring to specific commercial brands and models. An offered item shall be compliant to the text technical specifications and to the technological level, the design quality and the construction specifications displayed in the pictures. The above, quantities are indicative and not exhaustive requirements. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 2 of 36
Item B-2.01 Basin, washing newborn Portable babies wash basin mounted on stand. 1) Anatomically shaped basin, as per example below. 2) The Basin fits on sinks and can be used on flat surface. 3) Basin made of resistant, non-toxic, latex free plastic material. 4) Tissue reduction for babies below 3 kg weight. 5) Basin provided with water drainage tube of at least 2 meters lenght. Approximate dimensions 1) Basin 100 x45x40 cm (WxLxH). SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 3 of 36
Item B-2.02 Bassinets Simple and easily maneuverable cot for newborns. Functional characteristics 6) Frame in stainless steel or other material resistant to corrosion. 7) Four castors, at least two with brakes. 8) Removable transparent crib 9) Crib made of resistant plastic, acrylic or similar material resistant to corrosion, water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. 10) Crib height regulation. 11) Crib trendelenburg angle regulation up to at least 15 degrees. 12) Crib Internal size of at least 35x65 cm 13) Including soft, hygienic, washable, fire retardant mattress with at least 4 cm thickness, made of natural fibers. 14) Including soft, hygienic, washable, fire retardant pillow, made of natural fibers. 15) Workload not less than 10Kg. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 4 of 36
Item B-2.03 Beds, Fixed, Cradle, Pediatric Fixed Height Pediatric Bed with variable height mattress platform. 1) Frame: a) Frame made of epoxy-coated steel of at least 12 gauge; b) At least one side, removable and sliding rail of epoxy-coated steel; c) Mounted on a 4 wheels with brake possibly twin wheels. 2) Matress platform: a) Variable Height Mattress platform manually operated Trendelenburg capability; b) Range variable height of the mattress platform of at least from 700 mm to 900 mm; c) Sturdy steel mesh base to support the mattress. 3) Mattress and pillow: a) Mattress: manufactured by laminating a centerpiece of chip-foam, of at least 120 mm thick with a density of at least 60kg/m3. Enclosed by a removable waterproof cover, with hard cotton surface, hinged where the two pieces are joined; b) Pillow: Made of Anti-bacteria, anti-static, toxic-free, high-density foam core, provided with removable and washable hard cotton cover. Approximate Dimensions 4) 800 x 1600 mm overall external dimension. 5) Workload not less than 60Kg. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 5 of 36
Item B-2.04 Beds, Hydraulic, Articulated, 3 Sections Hydraulic dual-sided mattress platform, height adjustable, 3 sections, bed for intensive care patients. 1) Frame: a) Made of 4 epoxy-coated steel at least 12 gauge, round tube legs including seats for wheels and locking gears; b) Equipped with plastic bumpers and receptacles for patient-lifting and/or IV poles; c) All lifting mechanisms and Hydraulic pumps support made of epoxy coated, cold-drawn steel. 2) Mattress platform: a) Base consisting of rigid nonconductive hard plastic surfaces to allow save cardiopulmonary resuscitation; b) Mattress retainers. 3) Mattress and pillow: a) Mattress: manufactured by laminating a centerpiece of chip-foam, of at least 120 mm thick with a density of at least 80kg/m3. Enclosed by a removable waterproof cover, with hard cotton surface, hinged where the two pieces are joined; b) Pillow: Made of Anti-bacteria, anti-static, toxic-free, high-density foam core, provided with removable and washable hard cotton cover. 4) Movements/controls: a) Vertical movement control/adjustment via mechanically operated actuator with dual-sided pedal control; b) Back-rest and Knee-brake controlled/adjusted by screw-gear based retractable crank handles at the foot end; c) Calf section with drop-prevention device; d) up/down: height range of at least 480mm to 750mm; e) Backrest Elevation of at least +60º; f) Knee-brake Elevation of at least 20º. 5) Easily removable Stainless Steel Head & foot ends with plastic-covered bends and grips. Standards Painting thickness and resistance as per UNI-EN-ISO 2409 and ISO-2802. WELDING: as per UNI-EN 288 and UNI-EN 25817. Accessories included in the bid price 6) 3/4 bed size pair of stainless steel folding side-rails. 7) Telescopic IV-pole with 4 hooks. 8) Blanket Support. 9) Chart Holder. 10) Urine/Liquids sack holder. Approximate Dimensions 11) 2150 x 950 mm. 12) Workload not less than 190Kg. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 6 of 36
Item B-2.05 Beds, Hydraulic, Birthing Sturdy and robust table/bed for labor and delivery. 1) Frame: a) Made in robust combination of Tubular/oval steel tube epoxy coated at least 12 gauge; b) The top of the bed shall be in 3 sections; c) Ratchet operated rising backrest, retractable foot end and a fixed center part; d) Three separate mattresses of at least 100 mm thickness for each section fixed in position to the top of the bed by Velcro strips on the underside of each mattress section, to be anti-static, waterproof and washable; e) Two support handles shall be positioned on either side of the rising backrest; f) Led support stands with waterproof and washable protection. 2) Movements and controls: a) Mounted on four castor wheels, two with brake; b) Birth permitted in at least the following positions: Classic Lithotomic. Sitting and/or semi-sitting. Knee-elbow. Vertical. Squatting. Caesarean, surgical and fetus extraction. c) Vertical movement control/adjustment via hydraulically operated monobloc actuator with dualsided pedal control; d) All movement and control via gas-spring operated by head/side levelers; e) Quick release mechanism for back section adjustment during emergency situation for quick passage to CPR (Cardio Pulmonary Resuscitation) position. 3) Mattress: manufactured by laminating a centerpiece of chip-foam, of at least 150 mm thick with a density of at least 80kg/m3, pad covering material: antibacterial, antistatic, flame-retardant, resistant to corrosion of water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. 4) Head and lower ends a) Easily removable (for resuscitation). b) Made of Stainless Steel with plastic-covered bends and grips. c) Removable lower end for easy access to the delivery. Accessories included in the bid price 5) Pair of telescopic drop down stainless steel side-rails. 6) Telescopic IV-pole with at least 2 hooks. 7) Pair of adjustable leg crutches with anti-static pads and fixation straps. 8) Liquid collection pan. Standards 9) PAINTING: thickness and resistance control as per UNI-EN-ISO 2409 and ISO-2802. 10) WELDING: as per UNI-EN 288 and UNI-EN 25817. Approximate Dimensions 11) 2200 x 1000 mm. 12) Workload of at least 190Kg. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 7 of 36
Item B-2.06 Beds, Mechanical, Articulated, 3 Sections Mechanically controlled dual-sided mattress platform, fixed-height, 3 sections, bed for general & specialized wards. 1) Frame made of 4 epoxy-coated steel of at least 14 gauge, round tube legs including seats for wheels and locking gears. 2) Frame equipped with plastic bumpers and receptacles for patient-lifting and/or IV poles 3) Base of the mattress platform consisting of round/oval steel tubes crossed of rectangular crosspieces, joints and hingers made of cold-drawn steel. 4) Galvanized Grid platform with mattress retainers. 5) Mattress: manufactured by laminating a centerpiece of chip-foam, of at least 150 mm thick and of density 80kg/m3. Enclosed by a removable waterproof cover with external hard cotton surface, hinged where the two pieces are joined. 6) Pillow: Made of Anti-bacteria, anti-static, toxic-free, high-density foam core, provided with removable and washable hard cotton cover. 7) Movements/controls: a) Back-rest controlled/adjusted by screw-gear based retractable crank handles at the foot end; b) Backrest Elevation of at least +60º; c) Calf section with drop-prevention device. 8) Easily removable head and foot ends made of stainless steel with plastic-covered bends and grips 9) Workload not less than 190Kg. 10) Approximate Dimensions: 2160 x 900 mm. Accessories included in the bid price 1) Telescopic IV-pole with 4 hooks. 2) Blanket Support and Chart Holder. 3) Urine/Liquids sack holder. 4) Patient Lifting Pole (Monkeys' bar) for 35 beds. Accessories and movements not included in the bid price, must be quoted separately 1) 3/4 bed size pair of stainless steel folding side-rails. 2) UP/DOWN: height range of at least from 450mm to 750mm. 3) Knee-brake controlled/adjusted by screw-gear based retractable crank handles at the foot end. 4) Knee-brake elevation of at least 20º. Approximate Dimensions 13) 2150 x 950 mm. 14) Workload not less than 160Kg. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 8 of 36
Item B-2.07 Carts, anesthesia Anesthesia cart/trolley for drugs and equipment and resuscitation equipment. ITB-HTOC-77684-13-16155 (PPL) 1) Cart to store material for anesthesia and resuscitation to be used during surgical procedures. 2) Made of epoxy painted stainless steel of at least 16 gauge. 3) Mounted on four at least 100 mm castors of which two lockable, with foot operated locking mechanism. 4) The unit includes at least six drawers of different sizes, lockable to assure safety of material and drugs. 5) 2 drawers with partitions and top drawer has lock fit. 6) Large 16 gauge stainless steel working surface on the top. 7) Top storage compartment or shelf to get instant access to first line equipment. 8) 3 tier raised back rail system. 9) Side mounted drop shelf and defibrillator shelf. 10) Two hook infusion pole. 11) Mounted sharps container. 12) Gloves dispenser. 13) Waste container. 14) Frame includes handles for easy and rapid movements. 15) Made of durable, resistant to disinfectant and anti-bacteria material. Approximate Dimensions 16) 950x 600 x 950 (WxDxH) mm. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 9 of 36
Item B-2.08 Carts, Instruments - Cantilevers Standard instrument serving table for Operating Theatre (Mayo table) 1) Made of stainless steel of at least 16 gauge. 2) Shelf surface with a rim of at least 2 cm, for instrument transportation. 3) Mounted on four anti-static swivel castors. Approximate Dimensions 4) 400 x 600 x 800 mm (LxWxH). 5) Adjustable shelf height. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 10 of 36
Item B-2.09 Carts, Linen/Laundry, Dirty Laundry, 1 Bag Cart/Trolley for collection of dirty linen in the wards 1) Linen hamper with single bag. 2) Tubular steel frame 16 gauge on at least 4 castor wheels. 3) Rubber tires. Accessories included in the Bid Price. 4) 4 spare tissue bags included. 5) 10 spare plastic bags included. Approximate Dimensions 6) Linen bag approx. 450 mm wide x 750 mm height. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 11 of 36
Item B-2.10 Carts, Medication Standard cart/trolley for distribution of medication in the wards 1) Flat upper stainless steel 16 gauge surface with rim. 2) Reinforced metallic frame or tubular pipe. 3) Made of durable, resistant to disinfectant and anti-bacteria material. 4) Mounted on four castor wheels with bumpers (at least two with brakes). 5) At least 4 drawers of different sizes (as per example below). 6) Two of the drawer shall have at least 9 internal separated spaces to organize the medication distribution by patient bed. 7) Waste receptacle. 8) Push handle. 9) One lateral pouch for A4 document storage. 10) One lateral pouch for digital thermometers storage. Approximate Dimensions 11) 100x60x100 cm. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 12 of 36
Item B-2.11 Carts, Resuscitation Carts/Trolley for to use in hospital wards and intensive care area for resuscitating patients 1) Mounted on four at least 75 mm castors of which two lockable. 2) Reinforced metallic frame or tubular pipe. 3) Made of durable, resistant to disinfectant and anti-bacteria material. 4) With at least four drawers of different sizes, lockable to assure safety of material and drugs. 5) The cart can accept a variety of the accessories like Ambus, small oxygen bottle and other material for stat resuscitation. 6) Top storage compartment or shelf to get instant access to first line equipment. 7) Frame includes handles for easy and rapid movements within the wards. 8) Composed of the following elements/accessories: a) adjustable defibrillator tray; b) oxygen cylinder holder; c) two hook infusion pole; d) CPR cardiac board; e) gloves dispenser; f) waste container; g) 2 helix mouth-opener of plastic type; h) Oxygen bottle of approximately 10 liters, 200 bars, portable and provided with at least the following accessories: flux meter, humidifier and oxygen tubes; i) 1 Guedeloro-pharingeal cannulas complete set with measures at least from 00 to 5; j) Set of Macintosh laryngoscope with blades at least from n 1 to n 4; k) 1 adult and n 1 pediatric Magill forceps; l) 2 sets of three (adult, child and infant) bag valve masks like Ambu with O2 reservoir; m) 2 Tracheal tube series, each series at least with measures n 6.5, 7, 7.5, 8, 8.5, single use, transparent type and with low pressure balloon; n) 5 sets of two Tracheostomy cuffed tubes with disposable inner cannula (adult and pediatric); o) 5 oxygen masks Venturi type with connectors and with capabilities of providing FiO2 (Fraction Inspiration Oxygen) approximately of at least 24, 30, 35, 40, 50, 60%; p) 5 Oxygen-mask 100% type with reservoir; q) 5 Oxygen-mask 100% type without reservoir; r) 3 catheter-over-needle with at least 16, 18 and 21Ga; s) 5 infusion line with flux meter Dial-A-Flow type; t) 5 3 ways connectors for infusion lines; u) 5 nasogastric tubes of different sizes; v) 2 Binaural, stainless steel bell, cardiac, stetho-phonendoscopes; w) neurological hammer. 9) Made of durable, resistant to disinfectant and anti-bacteria material. Approximate Dimensions 10) 950x 600 x 950 (WxDxH) mm. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 13 of 36
Item B-2.12 Carts, service/utility Cart/trolley for transportation of material and other items in the wards 1) Sturdy, lightweight (i.e. aluminum or hard plastic) frame. 2) Three robust and resistant shelves, lipped on all sides for safety (as per example below). 3) Mounted on four swiveling large castors, at least two with brakes. 4) With guard-rails and ergonomic handle. 5) Workload not below 100kg for each shelf and 200 kg total. Approximate Dimensions 6) 600 x 400 x 850 mm (LxWxH). SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 14 of 36
Item B-2.13 Carts, Surgical Case Cart/Trolley for general transport and hold of surgical cases and other material for procedures within sterile / sanitized environments 1) Square open surgical trolley 2) AISI 304 stainless steel frame and shelves of at least 14 gauge. 3) 3 deep shelves made of stainless steel with safety edges. 4) 4 swiveling castors wheels of at least 15 cm diameter, at least 2 with brakes. 5) Easy to clean, anti-bacteria and resistant to corrosion. Approximate Dimensions 6) 700 x 500 x 850 mm (LxWxH). SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 15 of 36
Item B-2.14 Chairs, Breastfeeding Chair to be used by mothers while breastfeeding. 1) Ergonomic chair to allow a comfortable breastfeeding. 2) Backrest designed to support the mother s back without the need for cushions or pillows. 3) Either fixed or reclining backrest. 4) Chair sections covered by soft, comfortable, anti-bacteria, resistant to disinfectant, flame-retardant and washable material. 5) Soft seat to be used even with perineal trauma. 6) Pad covering material: antibacterial, antistatic, flame-retardant, resistant to corrosion of water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. 7) Removable, low arm-rests for easier feeding. 8) Chair seat height not more than 500 mm to allow easy and square positioning of the feet on the floor. 9) Chair seat width not less 500 mm. 10) Patient load capacity not less than 140Kg. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 16 of 36
Item B-2.15 Chairs, blood taking, high Set of a chair and a table for blood sample taking. 1) Wide blood donor chair which provide a comfortable patient position. 2) Fixed or movable chair (in case of movable chair: at least four castor lockable wheels) 3) Chair seat and back material: antibacterial, antistatic, flame-retardant, resistant to corrosion of water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. 4) Equipment provided with back-rest and 2 comfortable wide arms-rests. 5) At least one arm-rest movable. 6) One arm rest with a small stainless steel epoxy coated table with two drawers. 7) Table surface not below 300 cm2. 8) Chair seat height not less than 530 mm. 9) Chair seat width not less 600 mm. 10) Patient load capacity not less than 180Kg. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 17 of 36
Item B-2.16 Chairs, Commode Chair with removable seat and a covered commode pan for occasional use. ITB-HTOC-77684-13-16155 (PPL) 1) Frame structure made of 14 gauge stainless steel epoxy coated. 2) Molded plastic seat mounted on a height-adjustable metal frame. 3) Chair seat and back material: antibacterial, antistatic, flame-retardant, resistant to corrosion of water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. 4) With integral tubular armrests. 5) With a removable pan and lid. 6) Removable stainless steel. 7) Mounted on swivel casters of which two with stops. 8) Possibly folding frame for easy storage. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 18 of 36
Item B-2.17 Chairs, Reclining, Patient Rest Reclining chair for patients and relatives resting. 1) 14 gauge stainless steel tube frame. 2) Upholstered seat and back with washable cover, non- skid tread. 3) Chair seat and back material: antibacterial, antistatic, flame-retardant, resistant to corrosion of water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. 4) Tilting/removable footrest. 5) Backrest tilt function up to at least 60 from vertical position. 6) Armrest. 7) Head lateral supports. 8) Weight Capacity: of at least 150 kg. Approximate Dimensions 9) 650x850x1250 mm (LxWxH). SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 19 of 36
Item B-2.18 Curtains with Supporting Tracks System of Hospital type Curtains and supporting Trucks for division of small are/boots for privacy among patients and for shower. The quantity refers to the meters to be provided. 1) Hospital type, germ free curtains. 2) Highly resistant and easily dismountable and washable curtains. 3) Made of fire resistant material preferably plastic. 4) Sturdy and light metallic/aluminum trucking system to support the Curtains. 5) Curtains Height must be such as that they stay clear from floor around 20cm, knowing that the height of the room is 3.00 meters. 6) The curtains for shower will have, water resistant, material that may be different from the material of the curtains for the wards. Installation places and linear dimensions Room Description Tender meters of Additional meters curtains of curtains* 263,1 Salle de thérapies 1 2 263,2 Salle de thérapies 2 2 270 Électrotherapy 2 313 Prise de signes vitaux (DON DU SANG) 2 403 Soins Polyvalents (1 lit) 2 404 Salle d'insuffisance Respiratoire 2 408 Topique de Médecine (2 lits) - soins polyvalents 3 413 Salle de Réanimation (salle de déchoquage - ''red code'') 2 448 Salle d'observation pour patients pédiatriques (2 lits) 4 601 Module des Soins Intensifs adultes (5 lits) 7 601 Module des Soins Intensifs adultes (5 lits) 2 603 Module des Soins Intensifs adultes (4 lits) 5 603 Module des Soins Intensifs adultes (4 lits) 2 806-828 Douche 4 mt, 2 for each room 836-858 Douche 4 mt, 2 for each room 866-888 Douche 4 mt, 2 for each 906-928 Douche room 4 mt, 2 for each room *Additional quantity that may be required during the extended Bid validity according with the Tender document: BDS 13.1. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 20 of 36
SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 21 of 36
Item B-2.19 Intravenous Poles Mobile Support for intravenous serum delivery. 1) Manufactured from 12 gauge polished stainless steel. 2) Four infusion bag hooks. 3) A star base with at least five anti-static castors wheels of at least 50mm diameter. 4) Height adjustable at least between 1400 and 2000mm. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 22 of 36
Item B-2.20 Kick Buckets Heavy-duty stainless steel mobile kick bucket to use in operating rooms. ITB-HTOC-77684-13-16155 (PPL) 1) 14 gauge stainless steel bowl sitting on a ring with at least four or five caster wheels. 2) Perimeter bumper to protect walls. 3) Capacity: not less than 12L. 4) Rounded borders for easily cleaning. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 23 of 36
Item B-2.21 Orthopaedic External Fixation Systems Hospital Bed provided with mattress and an, stainless steel or aluminum alloy, Orthopedic External Fixation System mainly used for fractures management and rehabilitation procedures. 1) Standard Hospital Bed with external frame for mainly fractures management and other orthopedic applications. Over-bed orthopedic frame with handle facilities, chains and wheels with easy weights positioning for at least the following traction applications: a) Simple type cervical traction (ex: Head Halter traction); b) Cervical skeletal traction; c) Upper extremity tractions (homers, metacarpal, fingers, etc.); d) Lower extremity tractions (femoral, tibial, calcaneal, etc.) 2) Complete set of accessories and devices (tongs, rings, pins, strips, finger traps, etc.) to allow at least all the patient applications listed in the previous specification point. 3) Complete set of traction weights to cover at least all the previously listed applications, range of provided weights not smaller than from 1 to 20 kg, at least 10 pieces. 4) The Over-bed orthopedic frame and accessories material: stainless steel or aluminum alloy. 5) Back-section lifting angle: 0-75 degree. 6) Knee - section lifting angle: 0-35 degree. 7) Whole backward inclination angle: 0-8 degree. 8) Balkan Frame with monkey bars and monkey chains. 9) Pulley attachment (without weight chain and weight hangers). 10) Mounted on protective stumps. 11) Provision for I.V. Rod. 12) Freight saving knock-down construction. 13) Bed provided with trapeze handle and chain. Mattress 1) Compatible with the bed mattress platform. 2) Hinged mattress with number of sections compatible with bed sections number. 3) Mattress made of polyester foam with density not less than 35Kg/m3, flame retardant washing material, antibacterial, resistant to corrosion, water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. 4) Overall mattress cover washable up to 95 C, antistatic, flame retardant, and antibacterial. Item B-2.22 Resuscitators, Pulmonary, Manual Manual resuscitation set. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 24 of 36
1) Complete manual resuscitation set. 2) Rigid case. 3) Provided with refillable oxygen bottle (capacity approx. of 0,5 LT). 4) Reanimation bag valve masks like Ambu bag with O2 reservoir. 5) Not less than 2 face masks (for adult and child). 6) Not less than 3 Guendel cannulas. 7) Tongue puller. 8) Mouth opener. 9) Oxigen tube. 10) Oxigen reducer with manometer. 11) Autoclavable. 12) Bandage scissors. 13) 3 nylon bags with transparent cover and zip. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 25 of 36
Item B-2.23 Screens, Bedside, Triple Metal frame mobile folding screens to provide temporary privacy for patients. ITB-HTOC-77684-13-16155 (PPL) 1) Epoxy coated 16 gauge stainless steel frame. 2) Designed using durable and easy to clean panel systems for maximum hygienic situation. 3) Fold Flat for Storage. 4) Flame Retardant panels. 5) 3-Sections mounted on at least 6 caster wheels. 6) Removable and washable panels. 7) Panels material: flame retardant washing material, antibacterial, resistant to corrosion, water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. Approximate Dimensions 8) 190 x 50 x 180 mm (WxDxH). SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 26 of 36
Item B-2.24 Stretchers, Mobile, Hospital Stretcher for patient/treatment around the hospital, steel frame epoxy coated and base in carbon steel, Including one system for operating room transfer. 1) System composed by a removable patient plane and a support trolley. Support trolley 2) Trolley manufactured from tubular steel, base in carbon Steel top in tubular special antibacterial epoxy coated easy to wash and hygienic for the hospital environment. 3) Mounted on four 200mm anti-static swivel castors. 4) Two drip rod fittings at each end of the trolley as well as a drip rod holder, secured to the underside of the trolley. 5) Handles on both side of the stretcher. 6) Rubber protection rail all around the perimeter of the stretcher. Removable patient plane 7) Removable patient plane manufactured from tubular steel, base in carbon Steel top in tubular special antibacterial epoxy coated easy to wash and hygienic for the hospital environment. 8) At least 5 cm height, anti-static and waterproof mattress for the trolley made of polyester foam with density not less than 35Kg/m3 covered with flame retardant washing material, antibacterial, resistant to corrosion, water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. 9) Telescopic IV holder secured to the support trolley. 10) Pair of stainless steel folding or removable side-rails. 11) Small side handles. Operating room Transfer system 12) Patient transfer system on the long or on the short side of the stretchers. 13) All the provided stretchers have a removable patient plane that can be used to easily pass the patient from one trolley to another. 14) Transfer system made of rails and wheels. Accessories included in the Bid price: 15) Two spare transfer support trolleys besides the 9 requested. 16) One spare transfer support trolleys besides the 6 requested as additional quantities. Approximate dimensions of one stretcher and one trolley: 17) 700 x 1900 mm (W x L). 18) Weight Capacity: of at least 150 kg. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 27 of 36
Item B-2.25 Table, Laundry, Small Table to receive dirty clothes. 1) Manufactured from 12 gauge polished stainless steel. 2) Robust table to resist daily bumps and scratches. 3) Frame, table plane and shelf made by stainless steel, rectangular shape, rounded edges. 4) The table shall have four solid legs with diameter of at least 5 cm. 5) Lower mesh-wire type shelf. 6) For legs on plastic nonconductive bumpers. 7) At least 15 cm from the lower shelf to the floor. 8) Weight Capacity: of at least 150 kg. Approximate Dimensions 9) 1400 x 700 x 900mm (WxDxH). SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 28 of 36
Item B-2.26 Tables, CSSD, Inspection, Light Specially designed table for sorting, inspection and folding surgical dressing sets and towels/gowns. Electrical characteristics 1) A 120V, 60Hz mono-phase electrical source with line connection plug NEMA 5-15 type. 2) Protections against over-voltage and over-current line conditions. 3) Compliance with applicable Haitian standards and regulations. 4) Containing an illuminated inspection surface for inspecting linen and other goods. 5) The illuminated area must form a plane surface with the work-top. 6) Dedicated area illuminated from underneath by two, at least 25W, fluorescent tubes located beneath the top in a laminated recess. 7) The table should be equipped with two on/off switches for the light (one for each light). 8) Provided with an extended width to facilitate work with large dressing sheets. 9) Provided with unobstructed access to the working space, with the only supports needed should be at the corner legs. 10) 16 gauge Stainless Steel frame sturdy frame. Approximate dimensions: 11) 2000 x 1400 x 900 mm (LxWxH). SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 29 of 36
Item B-2.27 Tables, Examination/Treatment, Adjustable Adjustable movable table, hydraulically driven, used for examination and rehabilitation of patients. 1) At least n 2-sections physiotherapy table with independently adjustable back/headrest. 2) Sturdy structure in stainless steel, epoxy powder coated. 3) Vinyl-upholstered tabletop including a foam layer of at least 30 mm thick and of density no lower than 80kg/m3. 4) Vinyl-upholstered tabletop surface: antibacterial, antistatic, flame-retardant, resistant to corrosion of water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. 5) Adjustable height via hydraulic system. 6) With foot control operable from either side of table. 7) Shall be mounted on locking castors of at least 15 cm diameter. 8) Hydraulically driven. 9) Lifting capacity up to at least 150Kg. Approximate Dimensions 2000x650x900 mm (LxWxH). SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 30 of 36
Item B-2.28 Tables, Examination/Treatment, Fixed Table with fixed height and body position for no-specialized examination and minor treatments. 1) Sturdy structure made of wood or chrome plated steel tube. 2) Padding and coverage made of washable plastic material including a foam of 30 mm thick and of density 80kg/m3. 3) Enough rigid structure to allow save cardiopulmonary resuscitation. 4) Mounted on four rubber nonconductive feet. 5) Padding: antibacterial, antistatic, flame-retardant, resistant to corrosion of water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. 6) Possibly back/head rest adjustable section. 7) Weight Capacity: of at least 180 kg. Approximate Dimensions 8) 1800 x 600 x 780mm (WxDxH). SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 31 of 36
Item B-2.29 Tables, Gynaecologic Examination/Treatment Table/Bed for general gynecological examination with lithotomy poles. 1) Chromium-plated steel legs and epoxy-coated stainless steel structure. 2) Mounted on four rubber feet. 3) Backrest adjustable by gas-springs controlled from both sides. 4) Leg section can be lowered and removed. 5) Articulate thigh supports in soft polyurethane adjustable by clamps. 10) Vinyl-upholstered tabletop including a foam layer of at least 30 mm thick and of density no lower than 80kg/m3. 11) Vinyl-upholstered tabletop surface: antibacterial, antistatic, flame-retardant, resistant to corrosion of water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. 6) Extractable stainless steel basin. 7) Weight Capacity: of at least 180 kg. Approximate dimensions: 8) 1800 x 620 x 760 mm (LxWxH). SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 32 of 36
Item B-2.30 Tables, Over-bed, Fixed Height Simple feeding over-bed Table for Fixed Height Hospital Beds. 1) Manufactured from stainless tubular steel which shall be epoxy powder coated. 2) Mounted on 4 x 50mm swivel castors. 3) Adjustable height. 4) Flat top finished with a high quality wood-grained laminate or equivalent material. 5) Cantilever adjustable height to fit the hospital beds with fixed height (see Bed Specifications Item B-2.6). 6) Weight Capacity: of at least 20 kg. Approximate Plane Dimensions 7) 700 x 400 mm. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 33 of 36
Item B-2.31 Tables, Stainless Steel, CSSD Stainless Steel Table for use in Sterilization Area. 1) Framework and work surface in 14 gauge Stainless Steel for heavy work withstand. 2) Designed to be easy to clean and keep free from dust. 3) No sharp edge, all edged welded together and polished to all corners for hygiene as well comfort and safety. 4) Weight Capacity: of at least 150 kg. Approximate Dimensions 1200 x 650 x 900 mm (LxWxH). SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 34 of 36
Item B-2.32 Tables, Workstation, CSSD, Packaging Shelves Inspection and packaging table designed to sort, inspecting and packaging surgical and other medical material. 1) Top designed and manufactured to reduce reflection of the light form the surface. 2) Extended dimension to facilitate full inspection procedures. 3) Sturdy stainless steel frame. 4) Framework and work surface with smooth corner for hygiene and easy cleaning. 5) Two shelves console with electrical outlets. 6) At least n 2 drawers positioned under the working surface Approximate Dimensions 7) 1400 x 700 x 900 mm (LxWxH). Power Supply 8) At least 4, Single Phase 120 V 60 Hz plug NEMA 5-15 type, electrical outlets on the shelves side bar. Accessories included in the Bid price 9) One Multi-Roll Dispenser which can hold various sizes of rolls with sliding knife system built into the housing, approximate size 900 x 300 x 170 mm (Lx W x H). 10) One Heavy-duty Tape Dispenser to hold two reels of tape and built in knife, tape width no less than 25mm. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 35 of 36
Item B-2.33 Wheelchairs, Mechanical, Adult Mechanical wheelchair for adult patients. 1) Chrome plated tubular steel frame. 2) Fixed padded armrests. 3) Vinyl or similarly upholstery on seat, arms and backrest. 4) Vinyl-upholstered seat and back: antibacterial, antistatic, flame-retardant, resistant to corrosion of water, detergent soap, 70% ethylic alcohol solution with or without nitrite and to the hypochlorite of sodium. 5) Swinging, detachable foot rests with nylon heel loops. 6) Two spaced rear wheels with circular handles for patient self-propulsion. 7) Two small ball bearing swivel castors on front. 8) Non-marking rubber tires. 9) Wheel locks for rear wheels. 10) Capacity at least up to 150 Kg. 11) Two handles with hand-grip at top rear backrest. 12) Seat not less than 500x400 mm (WxD) 13) Overall dimensions not exceeding 950x700x1350 mm (HxWxL) with footrest fully extended. SECTION V SCHEDULE OF REQUIREMENTS Schedule 3: Technical Specifications Page 36 of 36