Parts and Accessories for Dispenser

vol.3 Parts and Accessories for Dispenser Dispenser controller Adapter tube O-ring Head cap Syringe Plunger Needle cap Needle & Nozzle

Syringe for dispenser Syringes Syringe full scale drawing You can confirm your syringe size by comparing with the drawing below. 70ml 100ml Clear syringe Graduated Ungraduated Ungraduated Graduated Dimensions (overall lg. x flange lg. x ) 1 ml PSY-1E-M 84.4 ø6.6 PSY-1E2-M 84 ø6.7 3 ml PSY-3E 80.1 24.3 ø11.7 5 ml PSY-5E PSY-5E-M 80 ø.9 10 ml PSY-10E PSY-10E-M 105 32 ø.3 ml 70 ml 100 ml PSY-E PSY-30E PSY-50E PSY-70E PSY-100E PSY-E-M PSY-30E-M PSY-50E-M 105 45 ø26.2 130 45 ø26.2 1 45 ø26.2 4.2 45 ø26.5 1 60 ø35.8 pieces Material: Polypropylene Working pressure: 0.5 MPa (5 kgf/cm 2 ) maximum at room temperature Straight cylinder design Silicone free Original design minimizing expansion and contraction 50ml 30ml UV Block Syringe Ungraduated Ungraduated Graduated Dimensions (overall lg. x flange lg. x ) 3 ml PSY-3EU-OR 80 24.3 φ11.7 5 ml PSY-5EU-OR PSY-5EU-OR-M 80 φ.9 10 ml ml PSY-10EU-OR PSY-10EU-OR-M PSY-EU-OR PSY-EU-OR-M PSY-30EU-OR PSY-30EU-OR-M PSY-50EU-OR PSY-50EU-OR-M 105.3 32 φ.3 105 45 φ26.1 129.7 45 φ26.2 0.8 45 φ26.1 70 ml PSY-70EU-OR 4.4 45 φ26.4 Material: Polypropylene 10ml ml Graduated Complete blockage of UV rays Clearly visualized remaining liquid level provided by improved transmittance in visible light range Excellent flowability 1ml 3ml 5ml Color syringe Peppermint green Best suited for managing products by liquid Peppermint green syringe 5 ml 10 ml ml Ungraduated PSY-5E-PG PSY-10E-PG PSY-E-PG PSY-30E-PG PSY-50E-PG Dimensions (overall lg. x flange lg. x ) 80.4 ø.9 105.5 32 ø.3 105 45 ø26.2 130 45 ø26.2 1 45 ø26.2 Working pressure: 0.5 MPa (5 kgf/cm 2 ) maximum at room temperature Antistatic syringe Dimensions (overall lg. x flange lg. x ) 2 Elimination of static electricity thanks to its conductive design 10 ml PSY-10E-SEP PSY-30E-SEP PSY-50E-SEP 105.5 32 ø.3 130 45 ø26.2 1.5 45 ø26.2 Material: Polypropylene Working pressure: 0.5 MPa (5 kgf/cm 2 ) maximum for PSY-10E-SEP and 0.3 MPa (3 kgf/cm 2 ) maximum for PSY-30E-SEP and PSY-50E-SEP at room temperature

Stainless syringe Best suited for operations at high temperatures and pressures Syringes Dimensions (overall lg. x flange lg. x ) Dimensions (overall lg. x flange lg. x ) 1 ml 3 ml 5 ml SSY-1B SSY-3B SSY-5C ø ø ø 10 ml SSY-10C SSY-30C SSY-50C ø ø ø Material: SUS303 Working pressure: 0.7 MPa (7 kgf/cm 2 ) maximum when using a special-made SUS adapter tube 0.5 MPa (5 kgf/cm 2 ) maximum when using a standard adapter tube 3 Head cap Caps Needle cap 1 2 Syringe qfor clear wfor UV Block efor clear syringe syringe syringe 1 2 3 4 5 capacity 1 ml HC-1E HC-1E-H 3 ml HC-3E HC-3EU-B 5 ml HC-5E HC-5EU-B 50 Normal Type Knurled Type pieces/ Syringe qfor clear wfor UV Block efor clear rfor clear tfor UV Block 10 ml HC-10C HC-10U-B capacity syringe syringe syringe syringe syringe 70 ml HC-50E HC-50EU-B Common for 100 ml HC-100E all sizes NC-3E NC-3EU-B NC-5E NC-7E NC-7EU-B Material: Polyethylene Plunger (piston) Material: q, w Polypropylene e, r, t Polyethylene 4-type lineup available in accordance with liquid characteristics and applications High-precision dispensing with excellence in wiping performance These models are the syringe-specific plunger that is used in a syringe containing liquid to perform high-precision dispensing without any waste to the dispensing end. Other accessories Adapter tube The tube to supply air pressure from the dispenser to the syringe Adapter tube for plastic connector Syringe capacity FLP-E MLP-R-E MLP-B-E MLP-E For the case that the plastic connector is used on the dispenser side ø4 type (with tube clamp) ø6 type (with tube clamp) Length 3 ml AT-3E-P4C AT-3E-P6C 5 ml AT-5E-P4C AT-5E-P6C 1m 10 ml AT-10E-P4C AT-10E-P6C to 70 ml AT-50E-P4C AT-50E-P6C Adapter material: Polyacetal Tube material: Special elastomer resin O-ring material: Viton Note: The tube length cannot be changed. Working pressure: 0.5 MPa (5 kgf/cm 2 ) maximum For high-speed dispensing with high precision in micro volume Looser Fitting level against syringe Syringe capacity FLP ml (cc) 1 ml FLP-1E 3 ml FLP-3E 5 ml FLP-5E 10 ml FLP-10E to 70 ml FLP-50E Material: Polyethylene Adapter tube Adapter tube O-ring Syringe capacity Length Viton Silicone Nitrile rubber 1 ml 3 ml AT-1BST, AT-1E AT-3E AOV-1E AOV-3 AOS-1E AOS-3 AON-1 AON-3 5 ml AT-5E AOV-5E AOS-5E AON-5E pieces/ 10 ml AT-10E 1m AOV-10E AOS-10E AON-10E to 70 ml to 70 ml (for Σ) 100 ml AT-50E AT-50E-SIGMA AT-100E AOV-50E AOV-50E AOV-100E AOS-50E AOS-50E AOS-100E AON-50E AON-50E Adapter material: Polyacetal Tube material: Special elastomer resin Note: Each tube includes the -marked O-ring as a standard part. Working pressure: 0.5 MPa (5 kgf/cm 2 ) maximum Antistatic adapter tube For excellent wiping performance MLP-R MLP-B MLP MLP-R-5E MLP-R-10E MLP-R-50E MLP-B-5E MLP-B-10E MLP-B-50E MLP-5E MLP-10E MLP-50E Tighter Adapter tube O-ring Spare O-ring for adapter tube Selectable in accordance with fluid characteristics Elimination of static electricity thanks to its conductive design We recommend that you use this product in conjunction with our antistatic syringe. Syringe capacity Length 10 ml AT-10E-SEP 30, AT-50E-SEP 1m 30, (for Σ) AT-50E-SEP-SIGMA Adapter material: Polyacetal Tube material: Polyurethane O-ring material: Viton Note: Tube length can be changed in the unit of 0.5 m. E.g.: To a 1.5 m-length antistatic adapter tube for a 10 ml (cc) syringe, you need to specify "AT-10E-SEP-1.5M." Working pressure: 0.5 MPa (5 kgf/cm 2 ) maximum 3

Needles and nozzles for dispenser Metal needles Metal needle Needle length: 13 Needle length: 24.5mm 26.5mm 12 13 ø2.77 ø2.40 ø2. ø1.94 SNA-12G-B SNA-13G-B SNA-12G-C SNA-13G-C ø2.10 ø1.64 SNA-G-B SNA-G-C 13mm mm ø1.43 SNA-G-B SNA-G-C ø1.65 ø1. SNA-G-B SNA-G-C ø1.49 ø1.11 SNA-G-B SNA-G-C ø1.28 ø0.92 SNA-G-B SNA-G-C Adoption of durable SUS needle Lineup of needle lengths, 13 mm and mm ø1.08 ø0.82 ø0.64 ø0.61 ø0.52 ø0.42 ø0.34 SNA-G-B SNA-G-B SNA-G-B SNA-G-B SNA-G-B SNA-G-C SNA-G-C SNA-G-C SNA-G-C SNA-G-C 60 pieces/ 24 ø0.57 ø0.31 SNA-24G-B SNA-24G-C ø0.52 ø0.26 SNA-G-B SNA-G-C 26 ø0. SNA-26G-B SNA-26G-C ø0.42 ø0. SNA-G-B SNA-G-C 28 ø0.36 ø0. SNA-28G-B SNA-28G-C 30 ø0.32 ø0. SNA-30G-B SNA-30G-C Needle material: SUS304 Base material: Brass (Nickel plated) Plastic needle.5mm Disposable type Lineup of needle lengths, 8 mm and 13 mm Double thread screwed plastic needle 8mm 30.5mm 13mm 24 26 ø1.65 ø1.50 ø1. ø1.08 ø0.90 ø0.64 ø0.56 ø1.43 ø1.26 ø1.06 ø0.97 ø0.78 ø0.66 ø0.57 ø0.47 ø0.31 ø0.29 ø0. Needle material: SUS304 Color Needle length: 8 Needle length: 13 PN-G-A PN-G-B Black PN-G-A PN-G-B Blue PN-G-A PN-G-B Gray PN-G-A PN-G-B Light green PN-G-A PN-G-B Light pink PN-G-A PN-G-B White PN-G-A PN-G-B Light blue PN-G-A PN-G-B Yellow PN-G-A PN-G-B Ivory PN-24G-A PN-24G-B PN-G-A PN-G-B Peppermint green PN-26G-A PN-26G-B PN-G-A PN-G-B Base material: Polyacetal Full scale 55.7mm 43.0mm 30.3mm 24.0mm 38.1mm.4mm 30 32 12.7mm 6.4mm Reliable and sure fitting thanks to needle base with double thread screwed design Secure needle mounting on syringe due to large four-vane design Needle length: 6.4 Needle length: 12.7 Needle length:.4 Needle length: 38.1 Color ø1.65 ø1. ø0.71 ø0.64 ø0. ø1.52 ø1.37 ø0.84 ø0. ø0. ø0.10 Dark green Green Purple Blue Orange Red Clear Light purple Yellow DPN-32G-0 DPN-G-1 DPN-G-1 DPN-G-1 DPN-G-1 DPN-G-1 DPN-G-1 DPN-G-1 DPN-G-1 DPN-G-1 DPN-30G-1 DPN-32G-1 DPN-G-2 DPN-G-2 DPN-G-2 DPN-G-2 DPN-G-2 DPN-G-2 DPN-G-2 DPN-G-2 DPN-G-3 DPN-G-3 DPN-G-3 DPN-G-3 DPN-G-3 DPN-G-3 DPN-G-3 DPN-G-3 Needle material: SUS304 Base material: Polypropylene 4

Metal needles Curve needle Angle: 45 Needle length: 12.7mm Angle: 45 Needle length: 38.1mm Teflon needle with SUS guide Angle: 90 Needle length: 12.7mm 30 ø1.65 ø1. ø0.71 ø0.64 ø1.52 ø1.37 ø0.84 ø0. ø0. Needle material: SUS304 Resin needles and nozzles Best suited for dispensing to inner surfaces of workpieces Bend processing with excellent fluidity 2 kinds of angles available Angle: 45 Angle: 45 Angle: 90 Color Needle length: 12.7 Needle length: 38.1 Needle length: 12.7 Dark green CPN-G-A45 CPN-G-B45 CPN-G-A90 CPN-G-A45 CPN-G-A90 Green CPN-G-A45 CPN-G-B45 CPN-G-A90 CPN-G-A45 CPN-G-A90 Purple CPN-G-A45 CPN-G-B45 CPN-G-A90 Blue CPN-G-A45 CPN-G-A90 Orange CPN-G-A45 CPN-G-A90 Red CPN-G-A45 CPN-G-A90 Clear CPN-G-A45 CPN-G-A90 Light purple CPN-30G-A45 CPN-30G-A90 Base material: Polypropylene.5mm mm mm 1mm 1 31.3mm or 44.0mm 13.7mm or 26.4mm SUS guide Teflon needle Color ø2.42 ø2.01 ø2.01 ø1.82 ø1.67 ø1.56 ø1. ø1.07 ø0.96 ø0.86 ø0.68 ø0.56 ø0.38 Ivory Yellow Gray Light green Light pink Light blue TN-G- L-13G- L TN-G- L-G- L TN-G- L-G- L TN-G- L-G- L TN-G- L-G- L TN-G- L-G- L TN-G- L-G- L 11 piece Needle material: Teflon Base material: Polyacetal Guide material: SUS304 * Enter the Teflon needle length in the squares: 4 50 Enter the SUS guide length in the triangles: 3 49 (Make sure to specify an SUS guide that is 1 mm shorter than the Teflon needle.) Note: To a Teflon needle with an SUS guide, first determine the needle length. Ex.: To a mm-long G Teflon needle, write TN-G-L-G-L. Teflon needle.5mm 8mm Needle length: 13.7 Needle length: 26.4 Teflon needle Teflon needle Color Product code Product code (ø) (ø) TN-0.3-13.7-SUSG TN-0.2-13.7-SUSG TN-0.1-13.7-SUSG 63MB00 63LB00 63KB00 TN-0.3-26.4-SUSG TN-0.2-26.4-SUSG TN-0.1-26.4-SUSG 63MC00 63LC00 63KC00 0.5 0.4 0.3 0.3 0.2 0.1 Purple Orange / Needle material: Teflon Base material: Polypropylene Guide material: SUS304 For dispensing anaerobic fluids with high precision Equipped with SUS guide to prevent needlepoint unsteadiness For dispensing metal-needle-unusable-liquid Soft material to avoid damage to workpiece Applicable to anaerobic material dispensing 13 φ1.50 ø2.10 φ1.35 ø1.95 φ1. ø1.79 φ1.07 ø1.67 φ0.96 ø1.56 φ0.86 ø1.46 φ0.68 ø1. φ0.56 ø1.06 φ0.46 ø0.92 φ0.38 ø0.84 ø1.50 ø1.35 ø1. ø1.07 ø0.96 ø0.86 ø0.68 ø0.56 ø0.38 Needle material: Teflon Needle length: 8 Color Ivory TN-13G Blue TN-G Gray TN-G Ivory TN-G Yellow TN-G Gray TN-G Light green TN-G Light pink TN-G Light blue TN-G White TN-G Base material: Polyacetal 5

Needles and nozzles for dispenser Resin needles and nozzles Soft needle 55.6 mm.7 mm Color ø1.70 ø1.35 ø0.99 ø0.74 ø1.37 ø1. ø0.61 ø0.38 Dark gray Yellow Black Red PPN-G PPN-G PPN-G PPN-G PPN-G PPN-G Needle material: Polypropylene Base material: Polypropylene Soft material to avoid damage to workpiece Applicable to anaerobic material dispensing Double thread screwed tapered nozzle 31.6 mm Color ø2.08 ø2.08 ø1.50 ø1.11 ø0.90 ø0.75 ø1.60 ø1. ø0.84 ø0.61 ø0. Gray Green Blue Red TPND-G TPND-G TPND-G TPND-G TPND-G TPND-G Material: Polyethylene Needle length 31.6mm For high viscosity material Excellent fluidity of fluid thanks to tapered design resulting in best suitability for high-viscosity material dispensing 6 Super-fine nozzle.2 mm.2 mm Precision solid nozzle.mm High precision nozzles Luerlock type Double thread screwed type ø0.70 ø0.60 FN-0.60N FN-0.60ND ø0.60 FN-0.50N FN-0.50ND FN-0.40N FN-0.40ND FN-0.30N FN-0.30ND ø0.35 ø0. FN-0.N FN-0.ND FN-0.N FN-0.ND ø0. ø0. FN-0.N FN-0.ND ø0.10 FN-0.10N FN-0.10ND ø0. ø0.05 FN-0.05N FN-0.05ND ø0. ø0.04 FN-0.04N FN-0.04ND ø0.13 ø0.03 FN-0.03N FN-0.03ND ø0.12 ø0.02 FN-0.02N FN-0.02ND Overall length:.2 mm Base material: Brass (Nickel plated) Integral structure Tapered shape Ultra-thinned nozzle tip Nozzle tip with -micrometer thickness type Luerlock type Double thread screwed type ø0.63 ø0.53 ø0.43 ø0.28 ø0. ø0. ø0.13 ø0.08 ø0.07 ø0.06 ø0.05 ø0.60 ø0. ø0. ø0.10 ø0.05 ø0.04 ø0.03 ø0.02 FN-0.60N-F FN-0.50N-F FN-0.40N-F FN-0.30N-F FN-0.N-F FN-0.N-F FN-0.N-F FN-0.10N-F FN-0.05N-F FN-0.04N-F FN-0.03N-F FN-0.02N-F FN-0.60ND-F FN-0.50ND-F FN-0.40ND-F FN-0.30ND-F FN-0.ND-F FN-0.ND-F FN-0.ND-F FN-0.10ND-F FN-0.05ND-F FN-0.04ND-F FN-0.03ND-F FN-0.02ND-F Applicable to ultra-small volume dispensing and ultra-fine drawing 12 types from μm at minimum to 600 μm of inner diameter available ø0.60 ø0.55 ø0.45 ø0.35 ø0. ø0.45 ø0.35 ø0. ø0. ø0.10 SHN-0.5N SHN-0.45N SHN-0.4N SHN-0.35N SHN-0.3N SHN-0.N SHN-0.2N SHN-0.N SHN-0.1N Overall length:. mm Nozzle material: SUS303

High precision nozzles Precision nozzle Luerlock type.2mm Double thread screwed type This nozzle is suitable for materials containing fillers. Applicable to high-precision small volume dispensing Luerlock type Double thread screwed type ø0.80 ø0.70 ø0.60 ø0.60 HN-0.6N HN-0.5N HN-0.4N HN-0.6ND HN-0.5ND HN-0.4ND HN-0.3N HN-0.3ND ø0.45 ø0. HN-0.N HN-0.ND ø0. ø0. ø0.10 HN-0.2N HN-0.N HN-0.1N HN-0.2ND HN-0.ND HN-0.1ND Overall length:.2 mm Nozzle material: SUS303 Base material: Brass (Nickel plated).2mm Sharp needle A B D C Tip ø0.84 ø0. ø0. ø0.12 Color A B C D ø1.00 ø0.74 ø0.52 ø0.44 ø0.34 ø0.26 ø0. Green Blue Orange Red Peppermint green Gray 30.3 55.7 55.7 30.3 30.3.1 24.0 12.7 38.1 38.1 12.7 12.7 9.5 6.5 11.4 37.1 37.1 11.4 11.4 8.5 5.6 0.6 0.32 0.4 0.3 0.3 0.5 1.1 SPN-0.84-12.7L SPN-0.58-38.1L SPN-0.41-38.1L SPN-0.33-12.7L SPN-0.-12.7L SPN-0.-9.5L SPN-0.12-6.5L Needle material: SUS304 Base material: Polypropylene A: Overall length B: Needle length C: Visible Needle length D: Tapered tip length pieces/ Enlarged drawing of needle tip Applicable to small volume dispensing Tapered needle tip Needle base with double thread screwed design Special nozzles Multi-point dispensing needles 35.5mm mm Applicable to multi-point simultaneous dispensing 2mm 24 26 28 ø1.67 ø1.56 ø1. ø1.00 ø0.83 ø0.63 ø0.57 ø0.35 ø1. ø1.04 ø0.86 ø0.68 ø0.49 ø0.39 ø0.32 ø0.29 ø0.26 ø0.24 ø0. Twin needle (DN series) Needle length: mm 3-pin needle (DN-3P series) 4-pin needle (DN-4P series) DN-G DN-G DN-G DN-G DN-G DN-G DN-G DN-G DN-24G DN-G DN-26G DN-G DN-28G DN-G-3P DN-G-3P DN-G-3P DN-G-3P DN-G-3P DN-G-3P DN-24G-3P DN-G-3P DN-26G-3P DN-G-3P DN-28G-3P DN-G-4P DN-G-4P DN-G-4P DN-24G-4P DN-G-4P DN-26G-4P DN-G-4P DN-28G-4P Needle material: SUS304 Base material: Brass (Nickel plated) (0.6mm) 7

Needles and nozzles for dispenser Special nozzles Brush nozzle BN-S1 BN-S2 BN-S3 BN-S4 Applicable to wide-area surface dispensing Secure needle fitting on syringe thanks to double thread screwed design 41.2 mm 41.0mm 6.4 mm 10.0mm ø4.5mm ø2.0mm Hardness Brush material BN-S1 BN-S2 BN-S3 BN-S4 Standard type Soft type Standard type Soft type Polyester Polyester Polyester Polyester <External dimensions> BN-S1 and BN-S2 Overall length: 41.2 mm Brush length: 6.4 mm Brush diameter: ø4.5 mm BN-S3 and BN-S4 Overall length: 41.0 mm Brush length: 10.0 mm Brush diameter: ø2.0 mm Multi nozzles Nozzle kit case Sharp needle type Enlarged drawing of needle tip B A Sharp needle type (Option) Needle base Dimension A Dimension B MN-10 MN-13 MN- MN- MN- MN- MN- MN- MN- 10 13 Base material: SUS303 Multi-point simultaneous dispensing Applicable to various dispensing patterns This is a convenient kit with various needles and nozzles when the dispenser is used for manufacturing premise and research and development. Needle inner and outer diameters 12 13 ø2.99 ø2.42 ø2.01 ø1.82 ø1.67 ø1.56 ø1. ø1.00 ø2.30 ø1.80 ø1.58 ø1.37 ø1. ø1.04 ø0.86 ø0.68 24 26 28 ø0.83 ø0.63 ø0.57 ø0.35 ø0.49 ø0.39 ø0.32 ø0.29 ø0.26 ø0.24 ø0. Nozzle material: SUS304 Notes: When ing a nozzle, specify the needle type, needle arrangement, needle gauge, and needle length. To a special size not listed in the table above, please contact our sales office. Item name Nozzle kit Nozzle kit case Item number NK-1 NKC-1 Product code 100001 100002 Contents of Needle nozzle kit Metal needle Teflon needle Plastic needle Teflon needle with SUS guide Soft needle Curve needle Sharp needle Double thread screwed plastic needle Double thread screwed tapered needle Brush nozzle Safety precaution Make sure to read the instruction manual before you use the unit, for your safety. The specifications of the system may change without notice. All copyrights are retained by MUSASHI ENGINEERING. Reprinting, reproducing, and/or transmitting as electronic data in whole or in part these material without prior written permission is strictly prohibited. CAT. No. PDC30311-E07