Introduction Schlage full size cylinders are available in a large number of keyways in either the (obverse) family or the C family. Restricted keyways are also available to order.you must specify the keyway required when ordering. Unless otherwise specified, C123 is the new standard keyway for stock locks and C145 is the new standard keyway for masterkeyed product. Over the last few years Schlage has introduced a variety of new keyways and cylinder types.this Chart illustrates how these terms are related.the definitions below provide additional information. KEYWAY TYPE CYLINDER CATEGORY MECHANISM KEY CONTROL EVEREST CLASSIC Full Size Cylinders and Cores High Security Adds Patented Primus Primus and Geographical Restricted Duplication Exclusivity even to open keyways Levels 7-9 Levels 1-4 (Non-Primus) Open and Restricted Keyways Small Format Interchangeable Core (Best Style) (Non-Primus) Open and Restricted Keyways Best Compatible Keyways Patented Undercut Groove 482 Toll Free: (800) 221-2052 Phone: (718) 622-8785 Fax: (718) 789-8346 http://www.mfsales.com e-mail: pilgrim@mfsales.com
Cylinders and keys which incorporate all new keyways with the patented undercut groove on the right side of the key section. C Family is the name of the open family of keyways. B Family (for SFIC) and D Family keyways are restricted. Keyways Opposing Terms Schlage pin tumbler keyways which existed before keyways. Obverse is the name of the open family of keyways (C, E, etc.) and there are three other families of restricted keyways: Reverse, Numbered and Quad. Cylinder Mechanisms Primus Cylinders Schlage s high security sidebar cylinder mechanism. Patented key control, geographical exclusivity, and pick resistance are standard. UL 437 drill resistance is optional. Primus keys operate conventional cylinders. Opposing Terms Cylinders Normal, standard cylinders. Restricted Keyways Special non-stock keyways set aside for limited use and a higher degree of key control. A letter of authorization from the end user is required to process orders for keys, blanks and cylinders. Key Control Opposing Terms Open Keyways Standard keyways available without any ordering formalities. C Family ( ) and Obverse ( ) keyways are open. All others are restricted. Cylinder Category Small Format Interchangeable Core (SFIC) A core completely interchangeable with Best, Falcon, etc. No Primus version exists. Pins, springs, keys and keyways are based on a plug diameter smaller than the standard 1/2". Opposing Terms Full Size Pertaining to cylinders (including interchangeable cores), keys and keyways based on the industry standard plug diameter of about 1/2". Cylinders Full Size Interchangeable Core With Schlage Full Size Interchangeable Cores, you can integrate cores into any existing Schlage keying system with compatible, Primus or keyways.they are available in 606 and 626 finishes only. keyway cores are supplied 1-Bitted with two 1-Bitted keys control key is not included. Primus cores are normally supplied 0-Bitted and less key blanks (LKB). Small Format Interchangeable Core Schlage s Small Format Interchangeable Cores (SFIC) allow you to upgrade the security of an existing facility with a patented keying system. Small format cores are available to fit Best and other SFIC compatible locks.they are available in 606 and 626 finishes only with B family restricted keyways only. Contact us for restricted keyway requirements. Uncombinated cores are furnished less keys and pins. MODEL MECHANISM 23-030 & Keyways 20-740 Primus Controlled Access MODEL 80-037 SFIC combinated core 80-036 SFIC uncombinated core 483
Mortise & Rim Cylinders & Housings Mortise Cylinder With Compression ring & spring. Length: 1-1/8, 1-1/4 or 1-3/8". Other lengths are also available. Finish:Available in all standard architectural finishes including 605, 626 MODEL CAM MECHANISM 30-001 L-Series & Keyways 20-787 L-Series Primus Controlled Access 20-001 Straight & Keyways 20-700 Straight Primus Controlled Access 20-021 Rim Cylinder With vertical tailpiece. Cylinder mechanism: & Keyways or Primus Controlled Access. Finish:Available in all standard architectural finishes including 605, 626 20-079 IC Rim Cylinder Housing (core not included) Tailpiece: Convertible from vertical to horizontal Cylinder mechanism: Accepts, & Primus full size interchangeable cores. Finish:Available in all standard architectural finishes including 605, 626 SFIC Mortise Cylinder Housing (core not included) Standard Length: 1-3/8" Cylinder mechanism: Accepts Schlage, Falcon and other compatible small format (SFIC) cores. Finish:Available in all standard architectural finishes including 605, 613 and 626 MODEL 80-108 Housing with L-Series cam 80-102 Housing with Straight cam IC Mortise Cylinder Housing (core not included) Standard Length: 1-1/2" Cam: L-Series Cylinder mechanism: Accepts, & Primus full size interchangeable cores. Finish:Available in all standard architectural finishes including 605, 626 MODEL 30-137 Housing with compression ring 30-016 Housing less compression ring 484 Toll Free: (800) 221-2052 Phone: (718) 622-8785 Fax: (718) 789-8346 http://www.mfsales.com e-mail: pilgrim@mfsales.com
Mortise Cylinder Cams APPLICATION CLASSIC EVEREST & INTERCHANGEABLE CORE For L-Series locks. L583-254 L583-153 L583-255 For straight cam applications. B502-191 B502-948 K510-730 K510-680 For L9060 Outside For Adams Rite MS, 4500 & 4700 Series. B502-292 B502-944 K510-711 For Adams Rite 4070 Series. B502-380 B502-945 B520-378 Corbin Russwin DL4000 Series (Old Corbin 420 & Russwin 1503). B520-295 B520-366 B520-254 Corbin Russwin ML2200 Series (Old Corbin 7000-9000 and Russwin 4000-5000) All functions except ML2255 and ML2242 inside (see straight cam). B520-233 B520-309 B520-253 Corbin Russwin A65 ML2200 master ring deadbolt functions manufactured before 6/10/93 and old Russwin cast iron residential locks. B520-223 B520-367 B520-360 Yale 2160,Arrow #004, Sargent 13-0660.All functions except 16 inside and 50 outside. For Corbin Russwin Master Ring Locks (These cams require the B202-339 Reducing bushing and screw.) B520-256 B520-329 B520-296 B502-486 B502-946 485
Cylinders for Schlage Cylindrical and Deadbolt Locks Cylinders for A, AL & D Series S Series D AL D A A ORB A73 ORB Levers Vertical Knobs Horizontal Cylinders for F Series B Series APPLICATION DESIGN MODEL MECHANISM A, H Series Except Orbit 21-002 & 20-724 Primus A, H Series Orbit (Except A73) 21-002-122 & 20-724-122 Primus AL Series All 21-020 & 20-728 Primus B Series BC100, B100, B250 22-002 & B400 20-729 Primus B Series BC600/700/800 B660 22-644 & 22-744 Primus BC600/700/800 B662 22-645 & 22-745 Primus D Series Knobs 23-001 & 20-748 Primus D Series Levers 23-013 & 20-750 Primus F Series BEL, GEO & PLY 29-002 C only ORB 29-003 C only ACC, FLA 29-005 C only S Series Levers 21-028 & 20-750 Primus 486 Toll Free: (800) 221-2052 Phone: (718) 622-8785 Fax: (718) 789-8346 http://www.mfsales.com e-mail: pilgrim@mfsales.com
SFIC Pins Description Part Number Type Size 34-902 #2B 34-903 #3B 34-904 #4B 34-905 #5B 34-906 #6B 34-907 #7B 34-908 #8B 34-909 Master/ #9B 34-910 build-up/ #10B 34-911 top pins #11B 34-912 #12B 34-913 #13B 34-914 #14B 34-915 #15B 34-916 #16B 34-917 #17B 34-918 #18B 34-919 #19B 34-800 #0A 34-801 #1A 34-802 #2A 34-803 #3A 34-804 Bottom pins #4A 34-805 #5A 34-806 #6A 34-807 #7A 34-808 #8A 34-809 #9A 34-950 check pin SFIC Caps 34-952 21C SFIC Springs C504-114 20S Tumbler spring C504-116 check pin spring SFIC Plug Retainer C603-633 Plug retainer Pins, Full Size Cylinders Description Part Number Type Size 34-101 #1 34-102 Top pins #2 34-103 #3 34-202 #2 34-203 #3 34-204 #4 34-205 Master pins #5 34-206 #6 34-207 #7 34-208 #8 34-209 #9 34-300 #0 34-301 #1 34-302 #2 34-303 #3 34-304 Bottom pins #4 34-305 #5 34-306 #6 34-307 #7 34-308 #8 34-309 #9 34-007 check pin Cap and Cap Pin C503-116 Cap pin C503-118 Cap Springs C503-113 Pin tumbler spring (including Primus) C503-115 Cap retainer pin spring (including Primus) C603-951 Primus finger pin spring and check pin spring C603-952 Primus sidebar spring Primus Finger Pins and Sidebars 34-001 Finger pin #1 34-002 Finger pin #2 34-003 Finger pin #3 34-004 Finger pin #4 34-005 Finger pin #5 34-006 Finger pin #6 C603-950 Sidebar 487
Key Blanks Standard Front and Back 35-100 5-Pin 35-101 6-Pin 35-056 Control 5-Pin 6-Pin Control CONTROL DO NOT DUPLICATE PAT. 5,715,717 35-003 Front and Back 35-009 Standard Front for C Family PAT. 5,715,717 Back of All Primus Primus DO NOT DUPLICATE PAT.NO.4,756,177 Facility or Dealer ID Number All blanks require proper authorization. Back of Both Section Standard Front 35-157 Operating 35-158 Control 35-004 Embossed Primus Key 35-005 Primus Embossed Control Back of All Keys (except unembossed) 488 Toll Free: (800) 221-2052 Phone: (718) 622-8785 Fax: (718) 789-8346 http://www.mfsales.com e-mail: pilgrim@mfsales.com
Key Ways All-Section Key L Multi-Section Keys H J K C CE E EF F FG G Keyways and Single Section Keys All-Section Key C000 Multi-Section Keys C100 C200 Multi-Section Keys Multi-Section Keys C150 C120 C230 C134 C145 C135 C125 C124 C123 C234 C235 C245 C345 Keyways and Single Section Keys New key systems begin here and expand to the right. Stock Primus HP Multi-Section Keys available only at Level 2 and higher. JP CP CEP EP EFP FP FGP Keyways and Single Section Keys 489