902-355/902-460 Heat Shrink Tubing Used for electrical insulation, bundling, and wire identification purposes in a variety of home, commercial, and industrial applications. Slides ealily over small inline splices and connectors. Can shrink down to 50% of its original diameter to fit snugly over any wire, hose or cable management project. Ideal way to terminate ends of Braided Sleeving, creating a tight, professional finish. 1/16'' 3/32'' 1/8'' 3/16'' 160 pieces: 4'' lengths 60 PC 35 PC 25 PC 20 PC 902-355 (Black) 1/4'' 3/8'' 900-147/900-148/900-149 10 PC 10 PC Steel Fish Tapes - 1/8'' wide 902-460 (Asst colors) 900-147 900-148 900-149 Made from flexible spring steel and black finish. Equipped with durable plastic container and slide handle. Easy to thread through the pipe and pull out the electric cable. Model No. Steel tape size 900-147 50 Feet PE shrink 900-148 100 Feet PE shrink 900-149 200 Feet PE shrink 902-197 Fiberglass Fish Tape Fiberglass tape size 150 Feet PE shrink 169
DK-2053A Fiberglass Push/Pull Rod Set (10 Pcs/set) Ceiling ducts Under floorboards Trunking Wall cavities Hook Ring Flexible Extender Replacement Parts: 9DK-2053A-B (3pcs/set Includes: Hook, Ring & Extender) 33 Feet Description 3.28 feet, 10pcs/set PVC tube 902-470/902-471 Ideal for running multi-purpose cable in hard-to-reach area such as behind walls, up through crawl spaces, and under floors. 10 pcs, 1M/3.28Ft each Diameter 5mm±0.2mm (13/64 ±0.008 ) Cable Routing Tools - TuffStik & TuffStik Jr. Luminescent Glow Stik Splinter Free Resin Gender Changer Mini Hook Domed Bullet Mini-Eye Splinter-free resin eliminates dangerous splinters. Includes luminescent glow stik Non-Conductive Easy to connect. Very flexible Tuff Stik Jr. Tuff Stik Part No. 902-470 902-471 Length 15 FT 30 FT 5 FT red 3/16 stiks X2 X5 5 FT luminescent 3/16 stiks X1 X1 Mini-hook 902-475 Mini-eye 902-476 Domed bullet 902-478 Gender changer 902-477 5 FT packaging tube 902-472 Cable Routing Tools - 18 FT Telescopic Push / Pull Rod With Hook Extendable pole with durable polyester resin baked enamel coating. Ideal for electricians and cable installers. More rigid than rod based tools for greater control over long reaches. Includes shoulder carrying strap. 18 FT Telescopic 170
Hook and Loop (Packs of 25) (Packs of 100) Description Part No. Color QTY PKG Description Part No. Color QTY PKG 900-098-BK 900-098-BU Black Blue Cable Ties 4''x3/32'' 902-012 Neutral 902-019 Black 8'' Hook and Loop Cable Ties 900-098-GN 900-098-OR 900-098-RD Green Orange Red 25 with header 7-7/8''x3/32'' 5-1/2''x9/64'' 902-015 Neutral 902-022 Black 902-013 Neutral 902-020 Black 900-098-WH White 7-7/8''x9/64'' 902-016 Neutral 902-023 Black 100 with header 900-098-YL Yellow Hook and Loop Cable Tie Assortment (Packs of 15) Description Part No. Color QTY PKG 7-1/2''x3/16'' 11-3/4''x3/16'' 902-014 Neutral 902-021 Black 902-017 Neutral 902-024 Black Colors: Black, Blue, Green Red & Yellow 900-098-AST Assorted 15 with beader 14-1/2''x3/16'' 902-018 Neutral 902-025 Black Hook and Loop Cable Tie 3/4'' Wide 1/2'' Wide Description Width Part No. Color PKG 902-305 902-035 902-305 Black 3/4'' wide 902-386 Red Hook and Loop Cable Tie (Bulk Roll,50') 902-387 Blue 902-035 Black with header 902-386 902-388 1/2'' wide 902-388 White 902-389 Blue 902-387 902-389 171
CP-391 All In One Cable Tacker STEP 1 Press the staple feeder downward and remove from its channel. STEP 2 Load a strip of staples into the channel. STEP 3 Slide in the staple feeder and push it upward to its locked position. Interchangeable staple guide plate For insulated staples only. CP-391-1 CP-391-2 All in one cable tacker can work with different kinds of round cables and flat wires. Easy way to change different staple guide plates to match different staples (CP-391-1 or CP-391-2) 16mm/ 0.63" 4.5mm/ 0.18" 8.0mm/0.31" 16mm/ 0.63" 7.0mm/ 0.28" 10.3mm/0.41" Body Replacement staples Round Cable Height: 4mm~6mm (0.16"~0.24") Flat Wire Height: 2.5mm~4.0mm Width: Below 8.0mm Round Cable Height: 6mm~8mm(0.24"~0.31") Flat Wire Height: 4.5mm~6.3mm(0.18"~0.25") Width: Below 10.3mm(0.41") ABS 180x30x148 7.1x1.2x5.8 CP-391-1 (200pcs/pack) CP-391-2 (200pcs/pack) Blister card CP-392 Heavy Duty 3 In 1 Tacker 1.Flat crown staples 4-14mm(5/32"-9/16") 200pcs 2.Round crown staples 10-12mm(3/8"-1/2") 200pcs 3.Brad Nails 10-14mm(3/8"-9/16") 200pcs 172 CP-392-3 Works with Arrow brand T25 staples. Flat Crown Staples 10.6mm/0.42" 1.2mm/ 0.05" 0.52mm/ 0.02" 500pcs/box 8mm/ 0.31" CP-392-4 Round Crown Staples 6.2mm/0.24" 1.2mm/ 0.05" 0.52mm/ 0.02" 12mm/ 0.5" 500pcs/box CP-392-5 Brad Nail 10mm/ 0.38" 1.2mm/ 0.05" 2.0mm/ 0.08" 1000pcs/box Easy-squeeze product works overtime as a staple gun, brad nailer, cable tacker and wire tacker Fastens 3 different types of staples: flat crown staples, round crown staples and brad nails Ideal for upholstery, wood working, ceiling tiles, rack & roofing Adjustable punch force to match different material hardness. Less force to squeeze and more driving power Non-slip grip and quick jam release Made of all carbon steel construction. Body Carbon steel 160x23x140 6.3x0.9x5.5 Replacement staples CP-392-3 (500pcs/box) CP-392-4 (500pcs/box) CP-392-5 (1000pcs/box) Blister card
CP-382 Cable Tie Gun CP-385 Cable Tie Fasten Tool Neatly cuts end of cable tie off Adjustable tension control Tension adjustment allows the user to adapt the tool to the size of the tie Cutting lever design to cut-off the excess tie for easy operation Tension Cutting Body Blade HRC Application Body Blade Application Aluminum S45C Cutter 48 ±2 Cable tie from 3/32"~3/16"(2.2~4.8mm) and thickness up to 1.6mm 160/6.3 Blister card Aluminum S45C cable ties thickness 3 mm and width 12mm 191/7.5 Blister card CP-383 Cable Tie Gun 902-321 Features: Adjustable tension control can be used for a variety of style cable ties Consistent flush cut with each use Durable die-cast steel construction Cable Tie: Thickness up to 1.3mm(0.05") Width up to 4.6mm(0.18") Stainless Steel Cable Tie Gun Ideal for tensioning and cutting off stainless steel cable ties both in ball lock and ladder types. Heavy duty, two stage manual tensioning tool for easy operation OAL: 8.2" Ideal for Stainless Steel Cable tie holder is specially made of SKD11 steel and CNC ground Cutting blade is made of SKD11 and CNC ground Self return spring design Cable control bar Made of Carbon Steel Non-slip TPR handles Tensioning and cutting off stainless steel cable ties O.A.L Steel 168/6.6 Blister card Suitable for most application fields of stainless steel cable ties. And up to 12mm wide. Blister Card 173