sira CERTIFICATION PDF Free Download

7B7B7B 2B2B2B 0B0B0B0B EastRising R 1B1B1BER-TFT050-3 TFT LCD Display Datasheet ISO9001 Registered Company sira CERTIFICATION 011 EastRising Technology Co., Limited 4B4B4BAttention: A. Some specifications of IC are not listed in this datasheet. Please refer to the IC datasheet for more details. B. The related documents for interfacing, demo code, ic datasheet are all available, please download from our web. C. Please pay more attention to INSPECTION CRITERIA in this datasheet. We assume you already agree with these criterions when you place an order with us. No more recommendations. 8B8B8B3BREV 9B9B9B4BDESCRIPTION 11B11B11B6B1.0 12B12B12B7BPreliminary 10B10B10B5BRELEASE DATE Release 13B13B13B8BSep-23-2013 2.0 Reduce the Width of FPC Aug-12-2016 URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 1 of 19

24B21BHHHHHHHHHHHH 24B21BHHHHHHHHHHHH 45B42B40BHHHHHHHH 15B15B15B10HHHHHHHHHHHHHHHHHHHHHHH 14B14B14B9B431B437B434B EastRising R CONTENTS 18BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 1. ORDERING INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 04U 19B19B19B14B14BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 1.1 Order Number - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - 0HHHHHHHHHHHHHH 4 20B20B20B15BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 1.2 Image - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 04H21BHHHHHHHHHHHH 21B18B18BHHHHHHHHHHHHHHHHHHHHUHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 2. SPECIFICATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05U 22B19B19B14B14BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 2.1 Display Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05 23B20B20B15BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 2.2 Mechanical Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05 HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 2.3 Electrical Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05 25B22B21BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 2.4 Optical Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05 26B23B22B13BHHHHHHHHHHHHHHHHHHHHHHHHHHUHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 3. OUTLINE DRAWING- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 06U 21B18B18BHHHHHHHHHHHHHHHHHHHHUHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 4. ELECTRICAL SPEC - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 07U 22B19B19B14B14BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 4.1 Pin Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0HHHHHH7 23B20B20B15BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 4.2 Absolute Maximum Ratings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 08 HHHHHHHHHHHHHHHHH 4.3 HHHHHHHHHHHHHHHHHHHHHHHHHH Electrical Characteristics - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 08 HH31B28B26B29BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 5. INSPECTION CRITERIA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09 32B29B27B30BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 5.1 Acceptable Quality Level - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09HH 33B30B28B31BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 5.2 Definition of Lot - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09 34B31B29B42BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 5.3 Condition of Cosmetic Inspection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09 35B32B30B43BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 5.4 Module Cosmetic Criteria - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1HHHHHH0 36B33B31B44BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 5.5 Screen Cosmetic Criteria (Non-Operating) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1HHHHHH2HHH 37B34B32BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 5.6 Screen Cosmetic Criteria (Operating) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1HHHHHHHHHHHH3 38B35B33B45BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 6. PRECAUTIONS FOR USING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15 39B36B34B31BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 6.1 Handling Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15 40B37B35B42BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 6.2 Power Supply Precautions- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16 41B38B36B43BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 6.3 Operating Precautions - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16 42B39B37B44BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 6.4 Mechanical/Environmental Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16 43B40B38BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 6.5 Storage Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16 44B41B39BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 6.6 Others - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16 URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 2 of 19

7. HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH USING LCD MODULES - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17 46B43B41B31BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.1 Liquid Crystal Display Modules - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17 47B44B42B42BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.2 Installing LCD Modules - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - HHHHHH17HHH 48B45B43B43BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.3 Precaution for Handling LCD Modules - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18 49B46B44B44BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.4 Electro-Static Discharge Control- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18 50B47B45BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.5 Precaution for Soldering to EastRising LCM- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18 51B48B46BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.6 Precaution for Operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19HH 52B49B47BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.7 Limited Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19 53B50B48BHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 7.8 Return Policy - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19 URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 3 of 19

1. 54B51B49BB451B457B454B54B51B49BB451B457B454B ORDERING INFORMATION 55B52B461B1.1 Order 60B57B54B47BPart Number(Order Number Number) 61B58B55B48BDescription ER-TFT050-3 ER-TP050-2 ER-TPC050-1 ER-CON40HT-1 ER-DBT050-3 5 TFT LCD Display with no Touch Panel. 5 Resistive Touch Panel. 5 Capacitive Touch Panel with Controller ZIF Connector with 40 Pins 0.5mm Pitch SMD Top Contact 8051 Microcontroller Development Board&Kit for ER-TFT050-3 1.2 Image Image for ER-TFT050-3 Image for ER-TP050-2 Image for ER-CON40HT-1 Image for ER-TPC050-1 URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 4 of 19

2. 58B55B52B140B435B432B429B SPECIFICATION 440B59B437B56B434B53B 2.1 Display Specification ITEM 60B57B54B47B 61B58B55B48BSTANDARD VALUE 62B59B56B49BUNIT 63B60B57B50BDisplay Format 66B63B60B68BDisplay Connector 69B66B63BFPC Connector 70B67B64B86BOperating Temperature 73B70B67B89BStorage Temperature 64B61B58B51B800(RGB)x 67B64B61B69BFPC 480 Dots -- 65B62B59B52B -- 68B65B62B70B 40 Pin,0.5mm Pitch, SMD Horizontal Type Top Contact -- -20 71B68B65B87B ~ +70-30 74B71B68B90B ~ +80 75B72B69B91B Touch Panel Optional Yes -- 81B78B75B 82B79B76BSunlight Readable 83B80B77B No -- 84B81B78B 72B69B66B88B 2.2 Mechanical Specification 86B83B80B ITEM 87B84B81BSTANDARD VALUE 88B85B82BUNIT 89B86B83BDiagonal Size 90B87B84B5 91B88B85Binch Outline Dimension with FPC Folded 120.90x75.95x2.9 mm 92B89B86BActive Area 108.0x64.8 93B90B87Bmm 99B96B93BPixel Pitch 0.135(W) x 0.135(H) 101B98B95Bmm 102B99B96B92BGross Weight 135.0 103B100B97B93B g 104B101B98B94B 2.3 Electrical Specification 106B103B100B ITEM 107B104B101BSTANDARD 109B106B103B71B IC Package 110B107B104B72BCOG VALUE 108B105B102BUNIT -- 111B108B105B 112B109B106B71BController 113B110B107B72BOTA7001A -- 114B111B108B 115B112B109B95B Interface 116B113B110B96BRGB Interface Response Time (Typ) 12 ms -- 117B114B111B 2.4 Optical Specification 119B116B113B ITEM 120B117B114BSTANDARD 122B119B116B53B LCD Type 128B125B122B62B Viewing Angle Range 131B128B125B56BColors VALUE 121B118B115BUNIT TFT-LCD 123B120B117B54B / Transmissive / Negative Left:75, 129B126B123B63B Right:75, Up:75, Down:60 65K/262K/16.7M 132B129B126B57B1 134B131B128B59BContrast Ratio (Typ) -- 136B133B130B61B 500:1 135B132B129B60B Brightness (Typ) 300 cd/m2 -- 124B121B118B55B deg 130B127B124B64B -- 133B130B127B58B URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 5 of 19

138B135B132B141B460B457B454B 1 2 3 4 5 6 7 8 9 EastRising R 459B137B456B134B453B3. OUTLINE DRAWING REV DESCRIPTION DESIGN DATE A0 1'ST DEGIN JIM Aug-12-2016 BACK STIFFENER 5.00±0.50 3.10±0.2 MODULE THICKNESS 1 40 EASTRISING TECHNOLOGY CO.,LTD TEL:86-755-33503871 33503873 Email:sales@ UNITS MM APPROVALS DATE GENERAL TOL. MODEL NUMBER : APP ER-TFT050-3 VERSION A0 CHK JACK Aug-12-2016 DWN JIM Aug-12-2016 DO NOT SCALE THIS DRAWING. PROJECTION SHEET: 1 BACK STIFFENER 0.30±0.05 FPC DEFINED PIN NO. SIGNAL PIN NO. SIGNAL 5.00±0.3 LEDK 21 B0 LEDA 22 B1 GND 23 B2 VCC 24 B3 R0 25 B4 10 11 12 13 R1 26 B5 R2 27 B6 R3 28 B7 R4 29 GND R5 30 CLK R6 31 DISP R7 32 HSYNC G0 33 VSYNC 14 G1 34 DEN 15 G2 35 NC 16 G3 36 GND 17 G4 37 XR(NC) 18 G5 38 YD(NC) 6.35±0.3 19 G6 39 YL(NC) Handler 20 G7 40 YU(NC) FRONT COMPONENTS AREA 1.50 MAX CONDUCTOR 0.135 0.045 R G B R G B R G B R G B R G B R G B 0.135 Pixels Details Scale:25:1 27.80±0.2 Customer Approved by: 120.70±0.3 MODULE OUTLINE 110.70±0.2 V,A 108.00±0.0 A,A 3.20±0.3 2.08±0.3 See Detail A 5.0'' TFT 800(RGB)X480 64.80±0.0 A,A 67.50±0.2 V,A 75.80±0.3 MODULE OUTLINE VIEWING DIRECTION (6 ' CLOCK) Component Area 25.90±0.2 48.50±0.5 W 0.35±0.03 4.00±0.2 26.30±0.3 P0.5*(40-1)=19.50±0.05 1 40 20.50±0.10 NOTE: 1.DISPLAY TYPE: TFT(NEGATIVE) 2.LCD POLARIZER TYPE: TRANSMISSIVE 3.VIEWING DIRECTION: 6 O'CLOCK 4.OPERATING VOLTAGE: VDD:3.3V 5.OPERATING TEMP: -20 ~ +70 C 6.STORAGE TEMP: -30 ~ +80 C 7.BACK LIGHT: 12 PCS LED (VF:19.2V IF:40mA) 8.DRIVE IC ILI6122+ILI5960 9.INTERFACE Parallel RGB 24-bit 10.REQUIREMENTS ON ENVIRONMENTAL PROTECTION ROHS URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 6 of 19

4. ELECTRICAL SPEC 448B139B445B136B442B133B 4.1 Pin Configuration Pin No Pin Name Descriptions 1 LEDK LED Cathode 2 LEDA LED Anode 3 GND Ground 4 VDD Power Supply 5~12 R0~R7 Red Data 13~20 G0~G7 Green Data 21~28 B0~B7 Blue Data 29 GND Ground 30 CLK Clock 31 DISP Display on/off 32 HSYNC Horizontal sync input in RGB mode. (Short to GND if not used) 33 VSYNC Vertical sync input in RGB mode. (Short to GND if not used) 34 DEN Data Enable 35 NC Not Connection 36 GND Ground 37 XR 38 YD 39 XL 40 YU X_ Right (This pin is used for resistive touch panel and active when the fpc of touch panel is connected with the fpc of display, otherwise it s no connection) Y_ Down (This pin is used for resistive touch panel and active when the fpc of touch panel is connected with the fpc of display, otherwise it s no connection) X_ Left (This pin is used for resistive touch panel and active when the fpc of touch panel is connected with the fpc of display, otherwise it s no connection) Y_ Up (This pin is used for resistive touch panel and active when the fpc of touch panel is connected with the fpc of display, otherwise it s no connection) URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 7 of 19

4.2 Absolute Maximum Ratings 258B255B252BSupply Voltage 433B251B430B248B427B245B 252B249B246B ITEM 253B250B247BSYMBOL 254B251B248BMIN. 255B252B249BTYP. 256B253B250BMAX. 257B254B251BUNIT for logic VCVCC -0.3 - +5.0 260B257B254BV 261B258B255B Input voltage 262B259B256BVin -0.3 - +5.0 V 264B261B258BTop -20 - +70 C 263B260B257Boperating temperature 265B262B259B storage temperature 266B263B260BTST -30 - +80 C Humidity RH - 90%(Max60 C) RH 4.3 Electrical Characteristics 268B265B262B ITEM 269B266B263BSYMBOL 271B268B265BMIN. 272B269B266BTYP. 273B270B267BMAX. 274B271B268BUNIT Power supply voltage VCC-VSS 2.7 3.3 3.6 V Input voltage'h'level VIH 0.7VCC - VCC V Input voltage'l'level VIL 0-0.3VCC V Output voltage'h'level VOH VCC-0.4 - VCC V Output voltage'l'level VCL VSS - VSS+0.4 V Current Power Supply IDD - - 220 ma Backlight Characteristics 268B265B262B ITEM 269B266B263BSYMBOL 271B268B265BCONDITION MIN. 272B269B266BTYP. 273B270B267BMAX. 274B271B268BUNIT BL Forward voltage Vf If=40mA - 19.2 - V BL Supply Current If - - 40 - ma BL Luminance Lv If=40mA 4200 - - Cd/m2 Operating LED life time Hr 20000 - - - Hour URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 8 of 19

314B31B EastRising R 286B283B280B29B46B43B40B5. INSPECTION CRITERIA H287B284281B30B434B45.1 Acceptable Quality Level 28B285B282BEach lot should satisfy the quality level defined as follows 289B286B283BPARTITION 290B287B284BAQL 291B28B285BDEFINITION 292B289B286BA. Major 293B290B287B0.4% 294B291B28BFunctional defective as product 295B292B289B. 296B293B290B1.5% 297B294B291BSatisfy all functions as product but not satisfy cosmetic standard 298B295B292B439B436B43B5.2 Definition of Lot 29B296B293BOne lot means the delivery quantity to customer at one time. 5.3 Condition of Cosmetic Inspection 301B298B295B INSPECTION AND TEST 302B29B296B-FUNCTION TEST 303B30B297B-APPEARANCE INSPECTION 304B301B298B-PACKING SPECIFICTION 305B302B29B INSPECTION 308B305B302B AQL CONDITION 306B303B30B- Put 307B304B301B- Tilt under the lamp (20W) at a distance 100mm from upright 45 degree by the front (back) to inspect LCD appearance. INSPECTION LEVEL 309B306B303B- SAMPLING 310B307B304B- SAMPLING 31B308B305B- MAJOR 312B309B306B- MINOR 313B310B307B- GENERAL METHOD: MIL-STD-105D PLAN: SINGLE DEFECT: 0.4% (MAJOR) DEFECT: 1.5% (MINOR) LEVEL: II/NORMAL URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 9 of 19

438B315B435B312B432B309B5.4 Module Cosmetic Criteria NO. Item Judgment Criterion Partition 1 Difference in Spec. None allowed Major 2 Pattern Peeling No substrate pattern peeling and floating Major 3 Soldering defects No soldering missing Major No soldering bridge Major No cold soldering 4 Resist flaw on substrate Invisible copper foil( 0.5mm or more)on substrate pattern 5 Accretion of metallic No soldering dust Foreign matter No accretion of metallic foreign matters(not exceed 0.2mm) 6 Stain No stain to spoil cosmetic badly 7 Plate discoloring No plate fading,rusting and discoloring 8 Solder amount a. Soldering side of PCB 1.Lead parts Solder to form a Filet all around the lead. Solder should not hide the lead form perfectly.(too much) b.components side (In case of Through Hole PCB ) Solder to reach the Components side of PCB 2.Flat packages Either toe (A) or heal (B) of the lead to be covered by Filet. A B Lead form to be assume over Solder. 3.Chips (3/2) H h (1/2)H h H URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 10 of 19

9 Backlight defects 1.Light fails or flickers.(major) 2. Color and luminance do not correspond to specifications. (Major) 3.Exceeds standards for display s blemishes, foreign matter, dark lines or scratches.() See list 10 PCB defects Oxidation or contamination on connectors.* 2. Wrong parts, missing parts, or parts not in specification.* 3.Jumpers set incorrectly.() 4.Solder(if any)on bezel,led pad,zebra pad,or screw hole pad is not smooth.() * if display functions correctly.major if the display fails. 11 Soldering defects 1. Unmelted solder paste. 2. Cold solder joints,missing solder connections,or oxidation.* 3. Solder bridges causing short circuits.* 4. Residue or solder balls. 5. Solder flux is black or brown. * if display functions correctly.major if the display fails. See list URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 11 of 19

5.5 Screen Cosmetic Criteria (Non-Operating) No. Defect Judgment Criterion Partition 1 Spots In accordance with Screen Cosmetic Criteria (Operating) No.1. 2 Lines In accordance with Screen Cosmetic Criteria (Operation) No.2. 3 Bubbles in Polarizer Size: d mm Acceptable Qty in active area d 0.3 0.3<d 1.0 1.0<d 1.5 1.5<d Disregard 3 1 0 4 Scratch In accordance with spots and lines operating cosmetic criteria, When the light reflects on the panel surface, the scratches are not to be remarkable. 5 Allowable density Above defects should be separated more than 30mm each other. 6 Coloration Not to be noticeable coloration in the viewing area of the LCD panels. Back-lit type should be judged with back-lit on state only. 7 Contamination Not to be noticeable. URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 12 of 19

5.6 Screen Cosmetic Criteria (Operating) No. Defect Judgment Criterion Partition 1 Spots A) Clear Size:d mm d 0.1 0.1<d 0.2 0.2<d 0.3 0.3<d Acceptable Qty in active area Disregard Note: Including pin holes and defective dots which must be within one pixel Size. B) Unclear 6 2 0 Size:d mm d 0.2 0.2<d 0.5 0.5<d 0.7 0.7<d Acceptable Qty in active area Disregard 6 2 0 2 Lines A) Clear L 5.0 2.0 8 (6) (0) 0.02 0.05 0.1 See No.1 W Note: () Acceptable Qty in active area L - Length (mm) W -Width(mm) -Disregard B) Unclear L 10.0 (0) 8 (6) 2.0 0.05 0.3 0.5 See No.1 W Clear = The shade and size are not changed by Vo. Unclear = The shade and size are changed by Vo. URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 13 of 19

No. Defect Judgment Criterion Partition 3 Rubbing line Not to be noticeable. 4 Allowable density Above defects should be separated more than 10mm each other. 5 Rainbow Not to be noticeable. 6 Dot size To be 95%~105%of the dot size (Typ.) in drawing. 7 Brightness (only back-lit Module) Partial defects of each dot (ex.pin-hole) should be treated as spot. (see Screen Cosmetic Criteria (Operating) No.1) Brightness Uniformity must be BMAX/BMIN 2 - BMAX :Max.value by measure in 5 points - BMIN : Min.value by measure in 5 points Divide active area into 4 vertically and horizontally. Measure 5 points shown in the following figure. 8 Contrast Uniformity Contrast Uniformity must be BmAX/BMIN 2 Measure 5 points shown in the following figure. Dashed lines divide active area into 4 vertically and horizontally. Measuring points are located at the inter-sections of dashed line. Note: BMAX Max.value by measure in 5 points. BMIN Min.value by measure in 5 points. O Measuring points in 10mm. Note: (1) Size : d=(long length + short length)/2 (2) The limit samples for each item have priority. (3) Complexed defects are defined item by item, but if the number of defects is defined in above table, the total number should not exceed 10. (4) In case of concentration, even the spots or the lines of disregarded size should not be allowed. Following three situations Should be treated as concentration. -7 or over defects in circle of 5mm. -10 or over defects in circle of 10mm URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 14 of 19

319B316B313B45B465B462B459B EastRising R -20 or over defects in circle of 20mm 6. PRECAUTIONS FOR USING H320B317B314B31B45B42B438B6.1 Handling Precautions H41B267B438B264B435B261B 321B318B315B This 32B319B316B EastRising 323B320B317B If 324B321B318B Do 325B32B319B The 326B323B320B If 327B324B321B Solvents 328B325B32B Exercise 329B326B323B Install 30B327B324B Do 31B328B325B NC 32B329B326B If 3B30B327B To device is susceptible to Electro-Static Discharge (ESD) damage. Observe Anti-Static precautions. display panel is made of glass. Do not subject it to a mechanical shock by dropping it or impact. EastRising display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in your mouth. If the substance contacts your skin or clothes, wash it off using soap and water. not apply excessive force to the EastRising display surface or the adjoining areas since this may cause the color tone to vary. polarizer covering the EastRising display surface of the LCD module is soft and easily scratched. Handle this polarizer carefully. EastRising display surface becomes contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If it is heavily contaminated, moisten cloth with one of the following Isopropyl or alcohol. other than those above-mentioned may damage the polarizer. Especially, do not use the Water. care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water droplets, moisture condensation or a current flow in a high-humidity environment. the EastRising LCD Module by using the mounting holes. When mounting the LCD module make sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the cable or the backlight cable. not attempt to disassemble or process EastRising LCD module. terminal should be open. Do not connect anything. the logic circuit power is off, do not apply the input signals. prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment. 34B31B328B-Be sure 35B32B329B-Tools required 36B3B30B-To reduce to ground the body when handling EastRising LCD modules. for assembling, such as soldering irons, must be properly grounded. the amount of static electricity generated, do not conduct assembling and other work under dry conditions. 37B34B31B-The LCD module is coated with a film to protect the display surface. Exercise care when peeling off this protective film since static electricity may be generated. URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 15 of 19

455B344B452B341B449B338B 468B358B465B35B462B352B 458B362B45B359B452B356B 359B356B353B EastRising R 6.2 Power Supply Precautions 338B335B332B42B461B458B455B339B336B333B Identify and, at all times, observe absolute maximum ratings for both logic and LC drivers. Note that there is some variance between models. 340B37B34B Prevent the application of reverse polarity to VDD and VSS, however briefly. 341B38B35B Use a clean power source free from transients. Power-up conditions are occasionally jolting and may exceed the maximum ratings of EastRising modules. 342B39B36B The VDD power of EastRising module should also supply the power to all devices that may access the display. Don t allow the data bus to be driven when the logic supply to the module is turned off. 43B340B37B43B 6.3 Operating Precautions 345B342B339B DO 346B343B340B Minimize 347B34B341B For 348B345B342B Operate NOT plug or unplug EastRising module when the system is powered up. the cable length between EastRising module and host MPU. models with backlights, do not disable the backlight by interrupting the HV line. Unload inverters produce voltage extremes that may arc within a cable or at the display. EastRising module within the limits of the modules temperature specifications. 349B346B343B44B452B449B446B 6.4 Mechanical/Environmental Precautions 350B347B34B Improper 352B349B346B Mount 353B350B347B Surface 354B351B348B Always 35B352B349B Prevent 356B353B350B Do 357B354B351B If soldering is the major cause of module difficulty. Use of flux cleaner is not recommended 351B348B345Bas they may seep under the electrometric connection and cause display failure. EastRising module so that it is free from torque and mechanical stress. of the LCD panel should not be touched or scratched. The display front surface is an easily scratched, plastic polarizer. Avoid contact and clean only when necessary with soft, absorbent cotton dampened with petroleum benzene. employ anti-static procedure while handling EastRising module. moisture build-up upon the module and observe the environmental constraints for storage tem not store in direct sunlight leakage of the liquid crystal material should occur, avoid contact with this material, particularly ingestion. If the body or clothing becomes contaminated by the liquid crystal material, wash thoroughly with water and soap 6.5 Storage Precautions When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps. 360B357B354BKeep EastRising 361B358B35BWhenever possible, modules in bags (avoid high temperature / high humidity and low temperatures below 0C EastRising LCD modules should be stored in the same conditions in which they were shipped from our company. 6.6 Others 363B360B357BLiquid crystals solidify under low temperature (below the storage temperature range) leading to defective orientation or the generation of air bubbles (black or white). Air bubbles may also be generated if the module is subject to a low temperature. 364B361B358BIf EastRising LCD modules have been operating for a long time showing the same display patterns, the URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 16 of 19

69B368B46B365B463B 362B H EastRising R display patterns may remain on the screen as ghost images and a slight contrast irregularity may also appear. A normal operating status can be regained by suspending use for some time. It should be noted that this phenomenon does not adversely affect performance reliability. 365B362B359BTo minimize the performance degradation of the LCD modules resulting from destruction caused by static electricity etc., exercise care to avoid holding the following sections when handling the modules. 36B363B360B-Exposed area 367B364B361B-Terminal electrode of the printed circuit board. sections. 7. USING LCD MODULES H 369B36B363B31B450B47B4B7.1 Liquid 371B368B365B Please 372B369B36B Do 373B370B367B N-hexane 374B371B368B When 375B372B369B Wipe 37B374B371B Avoid 378B375B372B Condensation 379B376B373B Do 380B37B374B Do 382B379B376B As Crystal Display Modules 370B367B364BEastRising LCD is composed of glass and polarizer. Pay attention to the following items when handling. keep the temperature within specified range for use and storage. Polarization degradation, bubble generation or polarizer peel-off may occur with high temperature and high humidity. not touch, push or rub the exposed polarizers with anything harder than an HB pencil lead (glass, tweezers, etc.). is recommended for cleaning the adhesives used to attach front/rear polarizers and reflectors made of organic substances which will be damaged by chemicals such as acetone, toluene, ethanol and isopropylalcohol. EastRising display surface becomes dusty, wipe gently with absorbent cotton or other soft material like chamois soaked in petroleum benzin. Do not scrub hard to avoid damaging the display surface. off saliva or water drops immediately, contact with water over a long period of time may cause 376B373B370Bdeformation or color fading. contacting oil and fats. on the surface and contact with terminals due to cold will damage, stain or dirty the polarizers. After products are tested at low temperature they must be warmed up in a container before coming is contacting with room temperature air. not put or attach anything on EastRising display area to avoid leaving marks on. not touch the display with bare hands. This will stain the display area and degradate insulation 381B378B375Bbetween terminals (some cosmetics are determinated to the polarizers). glass is fragile. It tends to become or chipped during handling especially on the edges. Please 383B380B37Bavoid dropping or jarring. 7.2 Installing LCD Modules 384B381B378B42B47B4B41B385B382B379B Cover the surface with a transparent protective plate to protect the polarizer and LC cell. 386B383B380B When assembling 387B384B381Bplate should the LCM into other equipment, the spacer to the bit between the LCM and the fitting have enough height to avoid causing stress to the module surface, refer to the individual specifications for measurements. The measurement tolerance should be±0.1mm. URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 17 of 19

463B412B460B409B457B406B EastRising R 7.3 Precaution for Handling LCD Modules 390B387B384B Do 391B38B385B Do 392B389B386B Do 393B390B387B Absolutely 394B391B38B Except 395B392B389B Do 389B386B383BSince EastRising LCM has been assembled and adjusted with a high degree of precision; avoid applying excessive shocks to the module or making any alterations or modifications to it. not alter, modify or change the shape of the tab on the metal frame. not make extra holes on the printed circuit board, modify its shape or change the positions of components to be attached. not damage or modify the pattern writing on the printed circuit board. do not modify the zebra rubber strip (conductive rubber) or heat seal connector. for soldering the interface, do not make any alterations or modifications with a soldering iron. not drop, bend or twist EastRising LCM. 7.4 Electro-Static Discharge Control 398B395B392B Make 39B396B393B Before 40B397B394B When 401B398B395B When 402B39B396B As 403B40B397B To 397B394B391BSince this module uses a CMOS LSI, the same careful attention should be paid to electrostatic discharge as for an ordinary CMOS IC. certain that you are grounded when handing LCM. remove LCM from its packing case or incorporating it into a set, be sure the module and your body have the same electric potential. soldering the terminal of LCM, make certain the AC power source for the soldering iron does not leak. using an electric screwdriver to attach LCM, the screwdriver should be of ground potentiality to minimize as much as possible any transmission of electromagnetic waves produced sparks coming from the commutator of the motor. far as possible make the electric potential of your work clothes and that of the work bench the ground potential. reduce the generation of static electricity be careful that the air in the work is not too dried. A relative humidity of 50%-60% is recommended. 7.5 Precaution for Soldering to EastRising LCM 464B404B461B401B458B398B405B402B39B Observe 410B407B404B When 41B408B405B When the following when soldering lead wire, connector cable and etc. to the LCM. 406B403B40B-Soldering iron 407B404B401B-Soldering time: 408B405B402B-Solder: eutectic 409B406B403BIf soldering temperature : 280 ±10 3-4 sec. solder. flux is used, be sure to remove any remaining flux after finishing to soldering operation. (This does not apply in the case of a non-halogen type of flux.) It is recommended that you protect the LCD surface with a cover during soldering to prevent any damage due to flux spatters. soldering the electroluminescent panel and PC board, the panel and board should not be detached more than three times. This maximum number is determined by the temperature and time conditions mentioned above, though there may be some variance depending on the temperature of the soldering iron. remove the electroluminescent panel from the PC board, be sure the solder has completely melted, the soldered pad on the PC board could be damaged. URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 18 of 19

49B419B46B416B43B413B 431B428B425B EastRising R 7.6 Precaution for Operation 413B410B407B Viewing 414B41B408B Driving 415B412B409B Response 416B413B410B If 417B414B41B Condensation 418B415B412B When angle varies with the change of liquid crystal driving voltage (VO). Adjust VO to show the best contrast. the EastRising LCD in the voltage above the limit shortens its life. time is greatly delayed at temperature below the operating temperature range. However, this does not mean the LCD will be out of the order. It will recover when it returns to the specified temperature range. EastRising display area is pushed hard during operation, the display will become abnormal. However, it will return to normal if it is turned off and then back on. on terminals can cause an electrochemical reaction disrupting the terminal circuit. Therefore, it must be used under the relative condition of 40, 50% RH. turning the power on, input each signal after the positive/negative voltage becomes stable. 7.7 Limited Warranty 420B417B414BUnless agreed between EastRising and customer, EastRising will replace or repair any of its LCD modules which are found to be functionally defective when inspected in accordance with EastRising LCD acceptance standards (copies available upon request) for a period of one year from date of shipments. Cosmetic/visual defects must be returned to EastRising within 90 days of shipment. Confirmation of such date shall be based on freight documents. The warranty liability of EastRising limited to repair and/or replacement on the terms set forth above. EastRising will not be responsible for any subsequent or consequential events. 7.8 Return Policy 430B427B424B. 42B419B416BNo warranty can be granted if the precautions stated above have been disregarded. The typical examples of violations are: 423B420B417B-Broken LCD 424B421B418B-PCB eyelet 425B42B419B-PCB conductors 426B423B420B-Circuit modified 427B424B421B-PCB tampered 428B425B42B-Soldering to 429B426B423BModule repairs glass. damaged or modified. damaged. in any way, including addition of components. with by grinding, engraving or painting varnish. or modifying the bezel in any manner. will be invoiced to the customer upon mutual agreement. Modules must be returned with sufficient description of the failures or defects. Any connectors or cable installed by the customer must be removed completely without damaging the PCB eyelet s, conductors and terminals That s the end of the datasheet URL: www. Document Name: ER-TFT050-3 Datasheet-Rev2.0 Page: 19 of 19