Aft Sunshade 1 Identify Sunshade Top. Position bow with the black zipper to the rear of the boat and the white zipper to the front. 2 Unwrap Velcro straps to release adjustable support poles and remove pull pins. 3 Insert bow into upper mounts on arch. 4 1 2 Insert pull pins and lock.
5 Insert adjustable support poles into lower mounts on the arch. 6 2 1 Insert pull pins and lock. 7 Wrap Velcro straps around support poles, securing the pull-pin lanyards. 8 Raise adjustable support poles until the spring-loaded buttons snap into the lowest position.
9 Lift the Sunshade Top to the top of the arch. 10 Attach top zippers and complete the zip to the right and left. 11 12 Slide canvas until the top center snap is aligned with the center snap on the arch. Fasten all snaps.
13 Lower adjustable support poles. Pull down on bow to lock buttons into place. Make sure top is centered on bows. Complete
Three-Piece Visors 1 Find locator tags and identify center, port, and starboard visors. 2 Beginning with the center visor, attach top zipper and zip about 3 inches. 3 Attach top zipper of port visor and zip about 3 inches. 4 Attach top zipper of starboard visor and zip about 3 inches.
5 Attach vertical zippers and zip about 3 inches. 6 Fasten snaps to the windshield, working from the center to the outside. 7 Complete all zippers and secure Velcro strips. Complete
Side Curtains 1 Find locator tags and identify the port and starboard curtains. 2 Attach top zipper and zip about 3 inches. 3 Attach vertical zipper and zip about 3 inches. 4 Attach white arch zipper and, from outside of the boat, zip about 3 inches.
5 Fasten snaps to windshield. 6 2 1 Complete arch zipper and fasten snaps to arch. 7 Secure all Velcro strips. 8 Complete remaining zippers. Note: Can be zipped from inside or outside.
Complete
Aft Curtain 1 Find locator tag and position the Aft Curtain with bungee straps to the aft. 2 3 Pull the Aft Curtain to the Sunshade Top. Attach top zippers and zip about 3 inches. Attach white zippers to the arch and zip about 3 inches. 4 Beginning on the starboard side, fasten snaps to boat.
5 1 2 Pull on nylon loop provided if difficult to fasten snaps. 6 Attach bungee straps. 7 Re-enter the boat through the zippered walk-thru. 8 Complete all zippers.
Complete
Camper Package 1 Identify Camper Top. 2 Remove pull pins. 3 Insert bow into the front mounts. 4 Insert pull pins.
5 Remove Velcro straps to release the adjustable support poles. 6 7 Insert adjustable support poles into the rear mounts. 2 Insert pull pins. Wrap Velcro straps around support poles. 8 Remove boot and unwrap canvas.
9 Pull the Camper Top to the Sunshade Top. 10 11 Attach top zippers and complete the zip to the right and left. Slide arch zipper to center canvas if necessary. Lower adjustable support poles. Pull down on bow to lock buttons into place. Make sure top is centered on bows. Complete
Camper Side Curtains A1 Find locator tags and identify the port and starboard curtains. A2 Attach arch zipper and zip about 3 inches. A3 Attach top zipper and zip about 3 inches. A4 Snap canvas onto boat.
A5 Complete the top zipper. A6 Complete the arch zipper. Check all Velcro closures.
Camper Aft Curtain B1 Find locator tag and position the Camper Aft Curtain. B2 Attach top zippers and zip about 3 inches. B3 Attach vertical zippers and zip about 3 inches. B4 Complete top and portside zippers.
B5 Attach bungee straps. B6 Complete the starboard zipper. B7 Secure all Velcro strips. Complete