ELLAK PLASTICS (PTY) LTD Trading as BEVAN ENGINEERING Reg. 81/04165/07 Tool and Die Making Plastic Injection Moulding & Press Work CATALOGUE AGENTS Eastern Cape Agent Name: Coega Leisure cc Tel: (041) 364 0511 Fax: (041) 365 5289 E-mail: info@coegaleisure.com Western Cape Agent Name: Toucan Trading Tel: (021) 789 2507 Fax: (021) 789 2507 E-mail: a.hugo@mweb.co.za Natal Agent Name: Tuffdeck Tel: (039) 315 7131 Fax: (039) 3157131 E-mail: longc@lantic.net Gauteng Agent Name: BG Boats Tel: (011) 678 4292 Fax: (011) 678 2733 E-mail: nola@intervations.co.za FACTORY 19 Progress Road P. O. Box 395 Tel: (044) 382 3215 Industrial Area KNYSNA Fax: (044) 382 5709 KNYSNA 6570 Web : www.bgboats.co.za E-mail: info@bgboats.co.za or accounts@bgboats.co.za
Pg 2 of 73 BG1(A) BURGEE (STANDARD) Sturdy 3mm dia. Tough nylon frame with wind vane and aluminium shaft. Flag 140mm X 100mm light terylene material stiched with polyester thread. Balance of Burgee can be adjusted by cutting tab provided. BG1(B) CATAMARAN BURGEE Sturdy 3mm dia tough nylon frame with wind vane and stainless steel shaft. Flag 140mm x 100mm light terylene material stitched with polyester thread. Balance of burgee can be adjusted by cutting tab provided. Fits in upside down position on forestay chain plate. BG2 BURGEE HOLDER Length 35mm. Suitable for 3mm or 5mm shaft. Manufactured from Nylon BG3 FIXED FAIRLEAD Length 68mm. Screw hole pitch 48mm. Rope capacity maximum 15mm. Manufactured from Nylon. BG4(A) BULLSEYE FAIRLEAD (SMALL) Base 27mm. Screw hole pitch 15mm. Suitable for rope up to 6mm. Manufactured from Nylon. BG4(B) BULLSEYE FAIRLEAD (LARGE) Base 40mm. Screw hole pitch 25mm. Suitable for rope up to 10mm. Manufactured from Nylon. BG5 FERRULED BULLSEYE FAIRLEAD Base 40mm Screw Hole pitch 25mm. Suitable for rope up to 10mm with stainless steel ferrule. Manufactured from Nylon. BG6 DEADEYE FAIRLEAD Eye fairlead with open base. Screw hole pitch 22mm. Suitable for rope up to 6mm. Manufactured from Nylon.
Pg 3 of 73 BG7 U BOLT FAIRLEAD 8mm dia stainless steel U Bolt with stainless steel nuts, backing plates and nylon plastic insert with stainless steel ferrule. Used with rope up to 12mm dia BG8 SPINNAKER BOOM OR WHISKER POLE BRACKET with curved base for easy riveting or screwing to aluminium or wooden masts from 50 to 80mm dia. Suitable for use with BG9, BG10 & BG11. Manufactured from nylon. BG9 SPINNAKER BOOM OR WHISKER POLE SPIKE suitable for 25mm outside dia aluminium tube. To be used with BG8 and BG10. Manufactured from nylon. BG10 SPINNAKER BOOM OR WHISKER POLE HOOK suitable for 25mm outside dia aluminium tube. To be used with BG8 and BG9. Manufactured from nylon. BG11 SPINNAKER BOOM OR WHISKER POLE JOINER ST male and female threaded joiners. Used to extend or shorten spinnaker boom or whisker poles. Fits into 25mm outside dia aluminium tube. Manufactured from black nylon. BG12 QUICK RLEASE SPRING CLIP 25MM suitable for 25mm dia tubing.manufactured from nylon. BG13 NYLON RING used together with nylon sail shackle BG34 on spinnaker and jibs. Manufactured from nylon.
Pg 4 of 73 BG14(A) TOESTRAP PLATE 50mm Long. Used with 4mm counter sunk screws for securing buoyancy bags, toestrap plates etc. BG14(B) TOESTRAP WASHER Used for securing toestrap plates etc. BG14(C) TOESTRAP DOMED WASHER Used for securing toestrap plates etc BG15 RUDDER RETAINING CLIP 35mm long, used on small dinghies to prevent rudders sinking after capsizeing. Manufactured from black nylon. BG16(A) LACING HOOK - BLK or WHT used for securing protection covers on Boats, Trailers,Bakkies etc.size 33mm x 29mm x 17mm high. Manufactured from black or white nylon. BG16(B) LACING HOOK BACKING PLATE Nylon backing plates for lacing hooks. Used to secure lacing hooks to canvas. BG17(A) DECK BUSH FAIRLEAD (SMALL) fits 16mm hole with 10mm inside dia hole. Screw hole pitch 28mm. Suitable for rope up to 8mm dia. Manufactured f rom black or white nylon. BG17(B) DECK BUSH FAIRLEAD (LARGE) fits 22mm dia hole with 16mm inside dia hole. Screw hole pitch 33mm. Suitable for rope up to 12mm dia. Manufactured from black or white nylon.
Pg 5 of 73 BG18 FERRULED DECK BUSH with stainless steel ferrule insert. Fits 22mm dia hole with 16mm inside dia hole. Screw hole pitch 33mm. Suitable for rope up to 12mm dia. Manufactured from black or white nylon. BG19(A) LARGE DECK BUSH & BUNG fits 22mm dia hole with 16mm inside dia hole. Screw hole pitch 33mm. Suitable for rope up to 12mm dia with bung. Deck Bush manufactured from black nylon. Bung manufactured from black polyethelene. BG19(B) PUSH-IN BUNG ONLY Fits BG17 Large. Manufactured from black polyethelene. BG20(A) TRANSOM DRAIN SOCKET WITH BUNG & SEAL Complete with retaining attachment on socket. Fits hole 25mm. Screw hole pitch 39mm. Bungs available as spares. Manufactured from black or white nylon. BG20(A)(2) SOCKET ONLY - BLK or WHT Screw hole pitch 39mm. Manufactured from black or white nylon. BG20(B) SCREW BUNG & SEAL ONLY - BLK or WHT Manufactured from black or white nylon. Fits hole 25mm. BG20(B)(1) BUNG SEAL ONLY (PVC) PVC seal for bung. Must be used with socket and bung.
Pg 6 of 73 BG21(A)(1) NYLON SHEAVE WHEEL 25mm Nylon Sheave Wheel 25mm DIA x 12mm WIDE x 7mm HOLE BG21(A)(2) DELRIN SHEAVE WHEEL 25mm Delrin Sheave Wheel 25mm DIA x 12mm WIDE x 7mm HOLE BG21(A)(3) POLYPOP SHEAVE SHEEL 25mm Nylon Sheave Wheel 25mm DIA x 12mm WIDE x 8.5mm HOLE BG21(A)(4) S/STEEL BUSH FOR 25x12x8.5 SHEAVE Stainless Steel bush to fit 25mm x 12mm x 8.5mm HOLE BG21(B)(1) NYLON SHEAVE WHEEL 26mm Nylon Sheave Wheel 26mm DIA x 9mm WIDE x 8.5mm HOLE (recessed side walls) BG21(B)(2) DELRIN SHEAVE WHEEL 26mm Delrin Sheave Wheel 26mm DIA x 9mm WIDE x 8.5mm HOLE (recessed side walls) BG21(B)(3) S/STEEL BUSH TO FIT 26mmX9mmX8.5mm H/SHE Stainless steel bush to fit 26mm x 9mm x 8.5mm HOLE ( Bush 10mm long)
Pg 7 of 73 BG21(B)(4) GLASSFILL SHEAVE WHEEL 26mm DIAx9mmWx8.5 Glassfilled Sheave Wheel 26mm DIA x 9mm WIDE x 8.5mm HOLE ( Flat side walls ) BG21(C)(1) NYLON SHEAVE WHEEL 39mm Nylon Sheave Wheel 39mm DIA x 12mm WIDE x 8.5mm HOLE BG21(C)(2) DELRIN SHEAVE WHEEL Delrin Sheave Wheel 39mm DIA x 12mm WIDE x 8.5mm HOLE BG21(D)(1) NYLON SHEAVE WHEEL 44mm Nylon Sheave Wheel 44mm DIA x 12mm WIDE x 8.5mm HOLE BG21(D)(2) DELRIN SHEAVE WHEEL 44mm Delrin Sheave Wheel 44mm DIA x 12mm WIDE x 8.5mm HOLE BG21(E)(1) NYLON SHEAVE WHEEL 50mm Nylon Sheave Wheel 50mm DIA x 14mm WIDE x 10.5mm HOLE BG21(E)(2) DELRIN SHEAVE WHEEL 50mm Delrin Sheave Wheel 50mm DIA x 14mm WIDE x 10.5mm HOLE
Pg 8 of 73 BG21(F)(1) NYLON SHEAVE WHEEL 65mm Nylon Sheave Wheel 65mm DIA x 17mm WIDE x 12.5mm HOLE BG21(F)(2) DELRIN SHEAVE WHEEL 65mm Delrin Sheave Wheel 65mm DIA x 17mm WIDE x 12.5mm HOLE BG21(G)(1) NYLON SHEAVE WHEEL 80mm Nylon Sheave Wheel 80mm DIA x 19mm WIDE x 12.5mm HOLE BG21(G)(2) DELRIN SHEAVE WHEEL 80mm Delrin Sheave Wheel 80mm DIA x 19mm WIDE x 12.5mm HOLE BG21(I)(1) NYLON SHEAVE WHEEL 17mm Glassfilled Nylon Sheave Wheel 17mm DIA x 6mm WIDE x 8.5mm HOLE BG21(I)(2) DELRIN SHEAVE WHEEL 17mm Delrin Sheave Wheel 17mm DIA x 6mm WIDE x 8.5mm HOLE BG21(I)(4) S/STEEL BUSH TO FIT 17mm SHEAVE WHEEL Stainless steel bush to fit 17mm Sheave Wheel X 8.5mm HOLE
Pg 9 of 73 BG21(J)(1) NYLON SHEAVE WHEEL 80mm Nylon Sheave Wheel 80mm DIA x 15mm WIDE x 12.5mm HOLE BG21(J)(2) DELRIN SHEAVE WHEEL 80MM Delrin Sheave Wheel 80mm DIA x 15mm WIDE x 12.5mm HOLE BG21(K) 44mm BRASS SHEAVE WHEEL ONLY Brass Sheave Wheel 44mm DIA x 7mm WIDE x 8.5mm HOLE BG21(L) BRASS SHEAVE WHEEL 25mm DIA x 8mm WIDE Brass Sheave Wheel 25mm DIA x 8mm WIDE x 8.5mm HOLE BG22(A) HALLIARD CLEAT - SMALL 65mm overall length. Screw hole pitch 24mm, suitable for rope up to 6mm dia. BG22(B) HALLIARD CLEAT - MEDIUM 85mm overall length. Screw hole pitch 28mm. Suitable for rope up to 8mm dia. BG22(C) HALLIARD CLEAT - LARGE 115mm overall length. Screw hole pitch 40mm. Suitable for rope up to 10mm dia. BG23(A) TILLER EXTENSIONS BG23(A)(1-2) RECTANGULAR ALUMINIUM TILLER EXTENSIONS: 76cm / 1M Rectangular 16mm X 10mm anodized aluminium tubing with stainless steel swivel & cup type handle.
Pg 10 of 73 BG23(A)(3) TILLER EXT. CUP END STOPPER ONLY BG23(B)(1-3) ROUND ALUMINIUM TILLER EXTENSIONS: 76cm / 1M / 2M Round 16mm dia anodized aluminium tubing with stainless steel swivel & tapered knob. BG23(B)(4) TILLER EXT. SOLID END STOPPER ONLY BG23(C)(1-4) ROUND FLEXIBLE PVC TILLER EXTENSIONS: 76cm / 1M / 1.5M / 2M Round flexible PVC plastic tube 16mm dia with stainless steel swivel & tapered knob. BG23(D)(1) TILLER EXT. SWIVEL COUPLING- RECTANGULAR Stainless Steel swivelling coupling for rectangular tiller extension. BG23(D)(2) TILLER EXT. SWIVEL COUPLING-ROUND Stainless steel swivelling coupling for Round tiller extension. BG23(E)(1-3) TELESCOPIC TILLER EXT: 0.9M - 1.4M / 1-1.7M / 1.5-2M BG24(A) TILLER EXTENSION CLIP - RECTANGULAR Rectangular clip suitable for holding BG23 Tiller Extension. Manufactured from black nylon.
Pg 11 of 73 BG24(B) TILLER EXTENSION CLIP - ROUND for use with round Tiller Extensions from 16mm to 20mm dia. Manufactured from black nylon. BG25 TILLER EXTENSION UNIVERSAL JOINT for use with 16mm dia aluminium tubing on rectangular wooden tiller extensions with 6mm dia mounting bolt. Manufactured from stainless steel and nylon. BG26(A) FLARE HOLDER - SMALL - BLK or WHT Spring clip type, used for holding large spinnaker booms and various tools. Small from 30mm to 45mm dia. BG26(B) FLARE HOLDER - LARGE - BLK or WHT Spring clip type, used for holding large spinnaker booms and various tools. Large from 40mm to 60mm dia. BG27(A) ALL PLASTIC CAM CLEAT Acetal resin pawls with attached leaf springs, which are available seperately as replacement. Suitable for rope up to 12mm. BG27(B) PAWLS FOR ALL PLASTIC CAM CLEAT Manufactured from acetal resin.
Pg 12 of 73 BG28(A)(1) BG CAM CLEAT - SMALL S/STEEL BASE Flat Stainless Steel base with delrin pawls and stainless steel spirngs. For use with rope up to 10mm BG28(A)(2) BG CAM CLEAT-SML S/STEEL BASE + SADDLE Flat Stainless Steel base with delrin pawls and stainless steel springs. For use with rope up to 10mm together with stainless steel saddle. BG28(B)(1) BG CAM CLEAT-SMALL PLASTIC BASE Flat acetal resin base with delrin pawls and stainless steel springs. For use with rope up to 10mm BG28(B)(2) BG CAM CLEAT-SML PLASTIC BASE + SADDLE Flat acetal resin base with delrin pawls and stainless steel springs. For use with rope up to 10mm. Base with stainless steel saddle. BG28(C)(1) BG CAM CLEAT-LARGE S/STEEL BASE Large Cam Cleat - formed stainless steel base with a nylon flat or curved spacer plate. Curved spacer plate used for mounting on masts and other curved surfaces. Used with rope up to 12mm BG28(C)(2) BG CAM CLEAT-LARGE S/S BASE + SADDLE Large BG Cam Cleat - formed stainless steel base with a nylon flat or curved spacer plate. Curved spacer plate used for mounting on masts and other curved surfaces. Used with rope up to 12mm. Base with stainless steel saddle. BG28(D)(1) BG CAM CLEAT-LARGE PLASTIC BASE Large Flat acetal resin base only Cam Cleat with a nylon flat or curved spacer plate together with a stainless steel saddle. Used for mounting on masts and other curved surfaces. BG28(D)(2) BG CAM CLEAT-LARGE PLASTIC BASE+SADDLE Large Flat acetal resin base only Cam Cleat with a nylon flat or curved spacer plate. Used for mounting masts and other curved surfaces.
Pg 13 of 73 BG28(E) PLASTIC MOUNTING BASE - ROUND or FLAT Polypropolene mounting base for BG28(c)(1) and (c)(2) in round or flat. BG28(F) MINI CAM CLEAT (49mm) Without Rope Guide BG28(F)(1) MINI CAM CLEAT (49mm) With Rope Guide BG28(F)(2) MINI CAM CLEATS/STEEL ROPE GUIDE BG29 BG EYE CLEAT Similar to BG28 Large with removable stainless steel fairlead, accepting up to 12mm dia rope with 3 screw mounting holes. BG30(A) SMALL WEDGE CLEAT - BLK or WHT without fairlead. Use with rope up to 8mm dia. Manufactured from black or white Hostaform. BG30(B) LARGE WEDGE CLEAT - BLK or WHT with fairlead and side recess to assist in preventing self cleating. For use with rope up to 8mm dia. Manufactured from black or white Hostaform.
Pg 14 of 73 BG31(A) SAIL BATTEN SOCKET LARGE WITH SCREW HOLE 80 x 23mm with 4 self tapping screw holes (2 per set). Manufactured from white nylon. BG31(B) SAIL BATTEN SOCKET SMALL - SET 44 x 19mm with clip together pins (2 per set). Manufactured from white nylon. BG31(C) PINS FOR (b) AND (c) - 2 PER SET White Hostaform pins for (b) and (d) BG31(D) SAIL BATTEN SOCKET MEDIUM 2+5 PINS 65 x 35mm with clip together pins (2 plates with 5 pins per set). Manufactured from white nylon and hostaform pins. BG32(A) PLASTIC SAIL LACING SLIDE: 16mm Small plastic Hostaform slide used with 16mm track. BG32(B) PLASTIC SAIL LACING SLIDE: 22mm Large plastic Hostaform slide used with 22mm track. BG32(C) S/STEEL SAIL LACING SLIDE: 16mm Small stainless steel slide used with 16mm track. BG32(D) S/STEEL SAIL LACING SLIDE: 19mm Medium stainless steel slide used with 19mm track.
Pg 15 of 73 BG32(E) S/STEEL SAIL LACING SLIDE: 22mm Large stainless steel slide used with 22mm track. BG32(F) S/STEEL SAIL LACING SLIDE: 26mm Large stainless steel slide used with 26mm track. BG32(G) S/STEEL SAIL LACING SLIDE: 23mm Large stainless steel slide used with 23mm track. BG33(A) SAIL HEADBOARD SMALL 100x78mm Small 100mm x 78mm Headboard made from Nylon 6 BG33(B) SAIL HEADBOARD MEDIUM 116x101mm Medium 116mm x 101mm Headboard made from Nylon 6 BG33(C) SAIL HEADBOARD LARGE G/filled 140x116mm Large 140mm x 116mm Headboard. Manufactured from glassfilled nylon. BG33(D) S/STEEL LINER FOR LARGE HEADBOARD Stainless steel liner for large headboards.
Pg 16 of 73 BG33(E) S/STEEL LINER FOR SML&MED HEADBOARD Stainless steel liner for small & medium headboards. BG34 SAIL SHACKLES supplied with stainless steel screws. Overall length 47mm - Inside side 8 x 30mm - Loop dia 6mm. Manufactured from white nylon. BG36 PLASTIC NUT Nyon self tapping nuts. Fits No. 8 and No.10 self tapping screws. Also used for screw point protection purposes. BG38(A-I) S/STEEL WASHERS (refer to Price List for specifications) BG39(A) S/STEEL CLEVIS RING 10mm OD x 1.1/2 COIL BG39(B) S/STEEL CLEVIS RING 10mm OD x 3 COILS BG39(C) S/S CLEVIS RINGS 1mm x 17mm x 1.1/2 COIL 1mmDIA spring wire x 17mm OD X 1.1/2 coils
Pg 17 of 73 BG39(D) S/S CLEVIS RINGS 1mm x 17mm x 3 COILS 1mmDIA spring wire x 17mm OD X 3 coils BG40(1-9) S/S CLEVIS PINS & RINGS OR SPLIT PINS (refer to Price List for specifications) BG41 STAINLESS STEEL SWIVEL with 10mm opening supplied together with 2 x 5mm clevis pins and rings BG42(A) S/STEEL STRIP SHACKLE- SMALL Inside size 19 x 9 with 5mm dia pin with large thumb hold. Manufactured from 1.6mm stainless steel with swaged threaded portion for extra threads. BG42(A)(1) S/LESS STEEL STRIP SHACKLE SMALL & WIDE Inside size 17.5 x 13 with 5mm dia pin with large thumb hold. Manufactured from 1.6mm stainless steel with swaged threaded portion for extra threads. BG42(B) S/STEEL STRIP SHACKLE - LARGE Inside size 39 x 16 with 5mm dia pin with large thumb hold. Manufactured from 1.6mm stainless steel with swaged threaded portion for extra threads. BG42(C)(1) S/STEEL 4mm D SHACKLE BG42(C)(2) S/STEEL 5mm D SHACKLE
Pg 18 of 73 BG42(C)(3) S/STEEL 6mm D SHACKLE BG42(D)(1) S/STEEL 4mm TWIST SHACKLE BG42(D)(2) S/STEEL 5mm TWIST SHACKLE BG42(E)(1) S/STEEL 4mm LONG D SHACKLE BG42(E)(2) S/STEEL 5mm LONG D SHACKLE BG42(F)(1) S/STEEL 5mm BOW SHACKLE BG42(F)(2) S/STEEL 6mm BOW SHACKLE BG43(A) S/S SWIVEL BASE+10mm SWIVEL PIN & STRIP with 10mm dia swivelling pin and strip shackle.
Pg 19 of 73 BG43(B) S/S BASE+SWVL BLK MNT& 5mm CLVS PIN & RG with swivelling block mount, 5mm dia clevis pin and ring, suitable for lighter load mounting blocks. BG44 STAINLESS STEEL RIGGING LINK fitted with 5mm clevis pin and clevis pin ring. Manufactured from 1.6mm stainless steel. BG44(A) STAINLESS STEEL RIGGING LINK (Round) fitted with 5mm clevis pin and clevis pin ring. Manufactured from 1.6mm stainless steel. BG45(A) STAINLESS STEEL SADDLE - SMALL inside width 9mm X 15mm high. Pressed from 1.6mm stainless steel with 5mm dia holes. BG45(B) STAINLESS STEEL SADDLE - LARGE inside width 15mm X 15mm high. Pressed from 1.6mm stainless steel with 5mm dia holes. BG45(C) PLASTIC SADDLE - EYESTRAP - BLK or WHT inside width 12.5mm x 8mm high. Manufactured from black or white nylon. BG45(D) STAINLESS STEEL SADDLE - MINI inside width 7mm x 7mm high. Pressed from 1.6mm stainless steel with 5mm dia holes. BG46 STAINLESS STEEL MOORING EYE U BOLTS: Flat based. Supplied with mounting and backing plates and 4 stainless steel nuts. Can also be used as a transom ski towing eye. See Sizes below.
Pg 20 of 73 BG46(1) 8mm DIA x 42mm PITCH x 100mm THREAD 8mm dia x 42mm pitch x 100mm threaded section. Flat base. Supplied with mounting and backing plates and 4 stainless steel nuts. Can also be used as a transom ski towing eye BG46(1)(A) PLATES ONLY FOR 8mm U BLOT BG46(1)(B) 8mm DIA x 42mm PITCH x 35mm THREAD BG46(2) 10mmD x 42mm PITCH x 125mm THREAD 10mm dia x 42mm pitch x 125mm threaded section. Flat base. Supplied with mounting and backing plates and 4 stainless steel nuts. Can also be used as a transom ski towing eye. BG46(2)(A) PLATES ONLY FOR 10mm U BOLT BG46(3) 12mmDIA x 45mm PITCH x 170mm THREAD 12mm dia x 45mm pitch x 150mm threaded section. Flat base. Supplied with mounting and backing plates and 4 stainless steel nuts. Can also be used as a transom ski towing eye. BG46(3)(A) PLATES ONLY FOR 12mm U BOLT BG46(3)(B) 12mm DIA x 45 PITCH X 200mm THREAD
Pg 21 of 73 BG46(3)(C) 12mm DIA x 45mm PITCH x 250mm THREAD BG46(4) 8mmDIA x 42mm PITCH x 150mm THREAD BG46(5) 6mm DIA x 16mm PITCH x 25mm THREAD 6mm dia x 16mm pitch x 25mm threaded section. Flat base. Supplied with mounting and backing plates and 4 stainless steel nuts. Can also be used as a transom ski towing eye. BG46(6) 6mm DIA x 16mm PITCH x 58mm THREAD 6mm dia x 16mm pitch x 58mm threaded section. Flat base. Supplied with mounting and backing plates and 4 stainless steel nuts. Can also be used as a transom ski towing eye. BG46(7) 6mm DIA x 31mm PITCH x 45 mm THREAD 6mm dia x 31mm pitch x 45mm threaded section. Flat base. Supplied with mounting and backing plates and 4 stainless steel nuts. Can also be used as a transom ski towing eye. BG46(8) 4MM DIA x 42MM PITCH x 100MM THREAD 4mm dia x 42mm pitch x 100mm threaded section. Flat base. Supplied with mounting and backing plates and 4 stainless steel nuts. Can also be used as a transom ski towing eye. BG46(8)(A) PLATE ONLY FOR 4MM U BOLT BG46(9) 5MM DIA x 42MM PITCH x 100MM THREAD
Pg 22 of 73 BG46(9)(A) PLATE ONLY FOR 5MM U BOLT BG46(10) 6mm DIA x 42MM PITCH x 100MM THREAD BG46(10)(A) PLATE ONLY FOR 6MM U BOLT BG47 STAINLESS STEEL V JAMMING CLEAT suitable for rope up to 6mm. BG47(A) MILD STEEL V JAMMING CLEAT - unplated suitable for rope up to 6mm. BG48(A) STAINLESS STEEL CHAIN PLATES - SMALL 16mm width x 100mm length with 3 mounting holes. Pressed from 1.6mm stainless steel. BG48(B) STAINLESS STEEL CHAIN PLATES - MEDIUM 19mm width X 125mm length with 3 mounting holes. Pressed from 1.6mm stainless steel. BG48(B)(1) STAINLESS STEEL CHAIN PLATES-MED H/DUTY 19mm width X 125mm length with 3 mounting holes. Pressed from 2mm stainless steel.
Pg 23 of 73 BG48(C) STAINLESS STEEL CHAIN PLATES - LARGE 19mm width X 200mm length with 4 mounting holes. Pressed from 1.6mm stainless ste BG48(D) STAINLESS STEEL CHAIN PLATE COVER PLATE Cover plates pressed from 1.6mm stainless steel. BG48(E) S/ STEEL CHAIN PLATE REINFORCED H/DUTY Re-inforced heavy duty 19mm width X 150mm length Pressed from 2mm stainless steel BG48(F) S/S CHAIN PLATE 199mm x 74mm (SPECIAL) BG49(A) S/S CHAIN PLATE ADJUSTER SMALL 16mm width x 100mm length x 10mm pitch with 6 adjustment holes supplied with clevis pin, rings and split pins BG49(B)(1) S/STEEL CHAIN PLATE ADJUSTER (10 HOLES) 16mm width x 160mm length x 12.7mm pitch with 10 adjustment holes supplied with clevis pin, rings and split pins BG49(B)(2) S/STEEL CHAIN PLATE ADJUSTER (7 HOLES) 16mm width x 120mm length x 12.7mm pitch with 7 adjustment holes supplied with clevis pin, rings and split pins BG49(C) S/S CHAIN PLATE ADJUSTER REINFORCED H/D Re-inforced heavy duty.
Pg 24 of 73 BG50(A)(1) PULLEY 10mm SGL BLOCK + MNTING SHACKLE 1 to 1 ratio: 10mm dia. Main sheet single block with shackle mounting and shackle.the sheave wheels operate with 10mm dia rope. The blocks are all supplied with strip shackles and can be mounted by means of using BG41, BG42 and BG43 BG50(A)(2) PULLEY 10mm MN SGL BLK+SHCKL MNT+BECKETT 1 to 1 ratio: Main sheet single block with shackle mounting, shackle and beckett. The sheave wheels operate with 10mm dia rope. The blocks are all supplied with strip shackles and can be mounted by means of using BG41, BG42 and BG43 BG50(A)(3) PULLY-10mm M/SHT DBL BLK + MNTG SHACKLE 1 to 1 ratio: Main sheet double block with shackle mounting and shackle. The sheave wheel operate with 10mm dia rope. The blocks are all supplied with strip shackles and can be mounted by means of using BG41, BG42 and BG43 BG50(A)(4) PULLY- MAIN SHT SGL BLOCK + SWIVEL MOUNT 1 to 1 ratio: Main sheet double block with swivel mounting.the sheave wheels operate with 10mm dia rope. The blocks are all supplied with strip shackles and can be mounted by means of using BG41, BG42 and BG43 BG50(A)(5) PULLY- MAIN SHT DBLE BLK + SWIVEL MOUNT 1 to 1 ratio: Main sheet double block with swivel mounting.the sheave wheels operate with 10mm dia rope. The blocks are all supplied with strip shackles and can be mounted by means of using BG41, BG42 and BG43 BG50(B)(1) PULLY-10mm MAIN SHT SISTER BLK+MNTG SHKL 2 to 1 ratio: Pulley block 10mm dia main sheet sister block with shackle mounting and shackle. The sheave wheels operate with 10mm dia rope. The blocks are all supplied with strip shackles and can be mounted by means of using BG41, BG42 and BG43 BG50(B)(2) PULLY-10mm SISTER BLK MNT SHKL &BECKETT 2 to 1 ratio: 10mm dia Main Sheet sister block with shackle mounting, shackle and beckett. The sheave wheels operate with 10mm dia rope. The blocks are all supplied with strip shackles and can be mounted by means of using BG41, BG42 and BG43 BG50(C)(1) PULLY BLK-SISTER BLK FIT WITH ADJ CAM CL BG50(a) Single or sister blocks fitted with adjustable BG cam cleat. Can be mounted with saddle and shackle on transoms or with our stainless steel swivel base BG43(a)or(b)on decks.
Pg 25 of 73 BG50(C)(2) PULLY-SNGL BLK WITH ADJ'BLE BG CAM CLEAT Single or sister blocks BG50(a)&(b) fitted with adjustable BG cam cleat. Can be mounted with saddle and shackle or transoms or with our stainless steel swivel base BG43(a)or(b)on decks. BG50(D)(1) PULLY-LG SNGL PLSTC P/BLK 39mmS/W BECKET 39mm dia sheave wheel. Assembled with stainless steel self tapping screws. Suitable for rope up to 10mm dia. BG50(D)(2) PULLY-LG SNGL PSTC+39mmSH/WHL NO BECKETT with 39mm dia sheave wheel. Assembled with stainless steel self tapping screws. Suitable for rope up to 10mm dia. BG50(D)(3) PULLY-LG DBL PLASTIC+39mm S/WH & BRACKET with 39mm dia sheave wheel. Assembled with stainless steel self tapping screws. Suitable for rope up to 10mm dia. BG50(D)(4) PULLY-LG DBL PLSTC+39mm S/WHL NO BECKETT with 39mm dia sheave wheel. Assembled with stainless steel self tapping screws. Suitable for rope up to 10mm dia. BG50(E)(1) PULLY-SML SGL PLSTC+26mm S/WHL + BECKETT with 26mm dia sheave wheel. Assembled with stainless steel self tapping screw. Suitable for rope up to 6mm dia. BG50(E)(2) PULLEY-SML SGL PLSTC+26mmS/WH NO BECKETT with 26mm dia sheave wheel. Assembled with stainless steel self tapping screws. Suitable for rope up to 6mm dia. BG50(E)(3) PULLY-SML DBL PLSTC+26mm S/WHL + BECKETT with 26mm dia sheave wheel. Assembled with stainless steel self tapping screws. Suitable for rope up to 6mm dia.
Pg 26 of 73 BG50(E)(4) PULLY-SML DBL PLSTC+26mm S/WH NO BECKETT with 26mm dia sheave wheel. Assembled with stainless steel self tapping screws. Suitable for rope up to 6mm dia. BG50(F) FIXED EYEBLOCK-26mm SHEAVE BG50(F)(1) PULLY-S/S MINI FIXD EYEBK+26mmS/W NO BKT with 26mm dia sheave wheel. For mounting with saddles. Suitable for rope up to 6mm dia. BG50(F)(1)( A) PULLEY S/S MINIATURE Brass Wheel+Beck with 25mm dia brass sheave wheel. For mounting with saddles. Suitable for rope up to 6mm dia. BG50(F)(2) PULLY-S/S MINI FXD EYEBLK+26mm S/W+BEKTT with 26mm dia sheave wheel. For mounting with saddles. Suitable for rope up 6mm dia. BG50(F)(3) MINI FIXED EYE BLOCK ON S/PLATE with 26mm dia sheave wheel and a side plate. For mounting with saddles. Suitable for rope up to 6mm dia. BG50(G)(1) PULLY-S/S MINI FIXD EYEBLOCK + 17mm S/WHEEL with 17mm dia sheave wheel. For mounting with saddles. Suitable for rope up to 5mm dia. BG50(G)(2) PLY-DBL s/s MINI FXD EYEBLK + 17mm no beck with 17mm dia sheave wheel. For mounting with saddles. Suitable for rope up to 5mm dia.
Pg 27 of 73 BG50(G)(2)A PULLEY BLOCK - D/B S/S MINATURE FIX EY with 17mm dia sheave wheel and beckett. For mounting with saddles. Suitable for rope up to 5mm dia. BG50(G)(3) PLY-SGL s/s MINI FXD EYEBLK + S/S PLT+beck BG50(G)(4) TRIPLE PULLEY WITHOUT BECKET BG50(H)(1) PULLY BLOCK - MINI HALLIARD BG51 ALUMINIUM TRACKS (LGTH UP TO 1 MTR) : BG51(A) ALU TRK+SLDG F/LEAD PIN+C/CLEAT+ INDEX P track with 6 CSK screw mounting holes and 6 index position holes. To adjust cleat position, unscrew fairlead & reposition cleat mounting plate. Suitable for all small dinges. Stops included. Anodised Aluminium Tracks from 30cm to 1m length. BG51(B) BG51(C) ALU TRK+ SL/FAIRLEAD + INDEX PIN ONLY ALU TRK WITH SLDG SADDLE& INDEX PIN With fairlead and index pin only. Track with 6 CSK screw mounting holes and 6 index position holes. Stops included. Anodised Aluminium Tracks from 30cm to 1m length. With saddle and index pin. Used to attach blocks etc. Track with 6 CSK screw mounting holes and 6 index position holes. Stops included. Anodised Aluminium Tracks from 30cm to 1m length.
BG51(D) BOAT PARTS ALU TRACK + SLIDING POST & INDEX PIN With swivel pin, shackle & index pin. Used to attach blocks etc. Track with 6 CSK screw mounting holes and 6 index position holes. Stops included. Anodised Aluminium Tracks from 30cm to 1m length. Pg 28 of 73 BG51(E) BG51(G) ALU TRACK+SLIDING CHEEK BLK & INDEX PIN ALU TRACK+SLIDING S/S LOOP & INDEX PIN With check block & index pin. For use with rope up to 10mm dia.track with 6 CSK screw mounting holes and 6 index position holes. Stops included. Anodised Aluminium Tracks from 30cm to 1m length. With stainless steel loop and index pin. Track with 6 CSK screw mounting holes and 6 index position holes. Stops included. Anodised Aluminium Tracks from 30cm to 1m length. BG51(H) ALU TRACK + MOUNTING HOLES ONLY Supplied in any length required from 30cm to 1m. Track with 6 CSK screw mounting holes and 6 index position holes. Stops included. BG51(I) BG51(J) BG51(K) BG51(L) ALU TRACK+U BOLT FXD F/LEAD & INDEX PIN ALU TRK+U BOLT SWVG F/LEAD C/CLEAT SADD ALU TRK+U BOLT SWVL FER.F/LD + SLIDE+PIN ALU TRACK + MNTG HOLES INDEX PIN+STOPS U Bolt fixed fairlead with 20mm dia hole fitted to slide with index pin. Used with rope up to 12mm dia. Track with 6 CSK screw mounting holes and 6 index position holes. Stops included. Anodised Aluminium Tracks from 30cm to 1m length. U Bolt swivelling ferruled fairlead together with cam cleat and large saddle, fitted to slide with index pin. Track with 6 CSK screw mounting holes and 6 index position holes. Stops included. Anodised Aluminium Tracks from 30cm to 1m length. U Bolt swivelling ferruled fairlead fitted to slide with index pin.track with 6 CSK screw mounting holes and 6 index position holes. Stops included. Anodised Aluminium Tracks from 30cm to 1m length. Track with 6 CSK screw mounting holes and 6 index position holes. Stops included. Anodised Aluminium Tracks from 30cm to 1m length. BG51(M) ALU TRACT 30mm WITH SLIDE & INDEX PIN + with swivel & BG50(a)(1) block. Track with 6 CSK screw mounting holes and 6 index position holes. Stops included. Anodised Aluminium Tracks from 30cm to 1m length. BG52 BLANK SLIDES WITH NYLON RUNNERS Blank Anodised Aluminium Slide used with BG51(h) for mounting various fittings.
Pg 29 of 73 BG53 BLANK SLIDE WITH NYLON RUNNERS+INDEX PIN Blank Anodised Aluminium Slide. For use with BG51(l) with mounting and index pin holes, for mounting various fittings. BG54 FIXED SPREADERS Fits masts up to 65mm dia. 6 mounting holes in robust stainless steel center section. Anodized 15mm x 10mm 1,6mm rectangular aluminium arms 50cm long. BG55 SKINFITTING COMPLETE (3 PARTS) with clip off grill. Fits 36mm hole through a maximum wall thickness of 30mm. Designed to be used in conjunction with 25mm agricultural plastic piping, elbows and tees. Manufactured from Hostaform. BG55(A) GRID FOR SKINFITTING Clip off grid only. Manufactured from Hostaform BG55(B) NUT FOR SKINFITTING Nut for skinfitting manufactured from Hostaform BG55(C) SKINFITTING INCOMPLETE Skinfitting body only. Fits 36mm hole through a maximum wall thickness of 30mm. Designed to be used in conjunction with 25mm agricultural plastic piping, elbows and tees. BG56 PUSH-IN BUNG FOR SKIN FITTINGS used with BG55 skinfitting. Manufactured from Polyprop. BG57 CATAMARAN MAST SWIVEL CHIP moulded and dished to fit mast step. Manufactured in black nylon.
Pg 30 of 73 BG58 CAT TILLER EXTENSION SWIVEL BUSH used as replacements on catamaran tillers. Manufactured from black nylon. BG59 UTILITY PUMP (BILGE PUMP) All plastic, non rust 500ml capactiy, capable of clearing bliges through 3 meters of 12mm dia garden hose and dumping the water through another 3 meters of 12mm garden hose. Will also pump most other liquids. BG60(A) SMALL TRIM RING ONLY (PLASTIC 100mm) Moto Well boot small trim ring only - plastic 100mm. Manufactured from black nylon. BG60(B) SMALL MOTOWELL BOOT WITH TIM RING for single cable installations. Rubber boots-rings manufactured from black nylon. BG60(C) LARGE TRIM RING ONLY (PLASTIC 123mm) 123mm ring only. Manufactured from black nylon. BG60(D) LARGE MOTOWELL BOOT WITH TRIM RING can be cut for multi cable installations. Rubber boots-rings manufactured from black nylon. BG61 KNOBS SUPPLIED WITH S/STEEL BOLTS/NUTS: BG61(A) KNOB-20mm HEAD 5mm THREAD x 20mm LONG Nylon Knob 20mm dia head with 5mm x 20mm long bolt. Suitable for hatch covers and holding down tools etc. Supplied with stainless steel bolts.
Pg 31 of 73 BG61(A)(1) KNOB 20mm HEAD WITH 5mm THREAD NUT Nylon Knob 20mm dia head with 5mm nut. BG61(A)(2) KNOB 20mm HEAD WITH 6mm THREAD NUT Nylon Knob 20mm dia head with 6mm nut. BG61(B) KNOB-40mm HEAD 6mmTHREAD x 25mm LONG Nylon Knob 40mm dia head with 6mm thread x 25mm long bolt. Suitable for hatch covers and holding down tools etc. Supplied with stainless steel bolts. BG61(B)(1) KNOB 40mm HEAD WITH 6mm THREAD NUT Nylon Knob 40mm dia head with 6mm nut. BG61(B)(SP EC) KNOB - 40mmDIA HEAD WITH 6mm NUT forward Nylon Knob 40mm dia head with 6mm nut slightly more forward. BG61(C) KNOB-50mm HEAD 8mm THREAD x 30mm LONG Nylon Knob 50mm dia head with 8mm thread x 30mm long bolt. Suitable for hatch covers and holding down tools etc. Supplied with stainless steel bolts.
Pg 32 of 73 BG61(C)(1) KNOB 50mm HEAD WITH 8mm THREAD NUT Nylon Knob 50mm dia head with 8mm nut. BG61(D)(1) KNOB-73mm HEAD 12mm THREAD x 30mm LONG Nylon Knob 73mm dia head with 12mm x 30mm long bolt. Suitable for hatch covers and holding down tools etc. Supplied with stainless steel bolts. BG61(D)(2) KNOB-73mm HEAD 12mm THREAD NUT Nylon Knob 73mm dia head with 12mm full nut. Suitable for hatch covers and holding down tools etc. Supplied with stainless steel nuts. BG61(E) KNOB-40mm HEAD 8mm THREAD RIGHT THRU Nylon Knob 40mm dia head with 8mm thread right through. Suitable for hatch covers and holding down tools etc. Supplied with stainless steel nuts. BG62 ROPE END STOPPER available in various colours. Manufactured from polypropolene. BG65(A) GRAB RAILING-END FITT. B/PLATE & 2xSCREW - BLK or WHT Nylon end fittings with backing plates supplied to gether with nylon washers and stainless steel screws for mounting. 19mm Anodized aluminium railing available in 2 meter lengths. If surface mounting is required required, holes are to be drilled on assembly.
BG65(B) BOAT PARTS GRAB RAILING- TEE PIECES B/PLATE 2xSCREW Nylon tee pieces with backing plates supplied to gether with nylon washers and stainless steel screws for mounting.. 19mm Anodized aluminium railing available in 2 meter lengths. If surface mounting is required, holes are to be drilled on assembly. Pg 33 of 73 BG65(C) GRAB RAILING ALUM TUBING 2M LENGTH 19mm Anodized aluminium railing available in 2 meter lengths. BG66(A) BAR CLEAT - SMALL - BLK or WHT 150mm long, 49mm hole pitch. Manufactured from black or white nylon. BG66(B) BAR CLEAT - LARGE - BLK or WHT 200mm long, 67mm hole pitch. Manufactured from black or white nylon. BG67 STAINLESS STEEL TRAPEZE RINGS Long handle design. Made from 5mm dia stainless steel. BG67(B) STAINLESS STEEL RING 5mm X 40 OD Ring only 50 X 40 OD Made from 5mm dia stainless steel. BG68(A) SAIL EYELET - 15L x 10mm BG68(A)(1) SML S/S 13mm Long x 10mm O + 2 Plast Washs w/out spikes & with 2 Brass Washs with 12mm OD x 10mm ID hole - with 2 plastic washers without spikes and with 2 brass washers. Stainless steel eyelet w ith nylon washers. BG68(A)(2) SML S/S 13mm Long x 10mm O + 2 Plastic Washers with Spikes with 12mm OD x 10mm ID hole - with 2 plastic washers with spikes. Stainless steel eyelet with nylon was hers
Pg 34 of 73 BG68(A)(3) SAIL EYELET WASHERS + SPIKES ONLY with spikes only 2 per pair. Manufactured from nylon BG68(B)(1) MED S/S 16mm Long x 16mm O + 2 Plast Washs w/out Spikes & with 2 Brass Washs with 19mm OD x 17mm ID - with 2 plastic washers without spikes and with 2 brass washers. Stainless steel eyelet with nylon washers. BG68(B)(2) SAIL EYELETS-MED S/S 16mm Long x 16mm DIA Hole + 2 Plastic Washers with Spikes with 19mm OD x 17mm ID - with 2 plastic washers with spikes. Stainless steel eyelet with nylon washers. BG68(B)(3) SAIL EYELET WASHERS + SPIKES ONLY washers with spikes only - 2 per pair. Manufactured from nylon BG68(C) SAIL EYELETS-LRG S/S 20mm Long x 23mm O + 2 Plast Washs with Spikes with 25mm OD x 23mm ID with 2 plastic washers with spikes. Stainless steel eyelet with nylon washers. BG68(D) EXTRA LONG FERRULES - ADD for extra long ferrules add additional price. BG68(E) SAIL EYELETS-MED S/S 16mm Long x 14mm DIA Hole with 19mm OD x 17mm ID - with 2 plastic washers without spikes and with 2 brass washers. Stainless steel eyelet with nylon washers. BG68(F) SAIL EYELETS-LRG S/S 20mm Long x 20mm DIA Hole with 19mm OD x 17mm ID - with 2 plastic washers without spikes and with 2 brass washers. Stainless steel eyelet with nylon washers.
Pg 35 of 73 BG69 TOP MAST TOP PLUG Top Mast plug and Boom end plug fits 50mm OD mast and boom sections. BG70-T ROWLOCK + TOP MOUNT BUSH (COMP) Rowlock & top mount complete. This rowlock is suitable for wooden, fiberglass or rubber dinghies. Manufactured from hostaform. BG70-S ROWLOCK + SIDE MOUNT BUSH (COMP) Rowlock & side mount complete. This rowlock is suitable for wooden, fiberglass or rubber dinghies. Manufactured from hostaform. BG70(A) TOP BUSH ONLY FOR ROWLOCK Top bush only for rowlock. Manufactured from hostaform BG70(B) SIDE MOUNT BUSH ONLY FOR ROWLOCK Side mount bush only for rowlock. Manufactured from hostaform. BG70(C) ROWLOCK ONLY Rowlock only. Manufactured f rom hostaform.
BG71 BOAT PARTS SAIL BATTEN ENDS These sail batten ends knock into oval PVC plastic battens and are used together with sail batten end protectors BG31(b). One split and one oval end (2 per s et). Pg 36 of 73 Manufactured from black or white nylon. BG72 TOP MAST SLEEVE Top mast sleeves are used mainly on similar size masts of 50mm OD x 47.6mm for the top section and 60.3mm ODx57.1mm bottom section. Manufactured from black nylon. BG73 BOOM GOOSENECK PLUG used with aluminium tubing 50mm OD x 47.6mm ID. Manufactured from black nylon. BG74 TOP MAST BOTTOM PLUG used with aluminium tubing 50mm OD x 47.6mm ID. Manufactured from black nylon. BG75 BOTTOM MAST BOTTOM PLUG used with aluminium tubing 50mm OD x47.6mm ID. Manufactured from black nylon. BG76 BEADING ENDS boat fender end fittings - fender strips 35mm wide. Manufactured from black nylon.
Pg 37 of 73 BG77 GUDGEONS Rudder Gudgeons used on various sailing dinghies. These gudgeons go together with pintles BG84. Manufactured from black nylon. BG79(A) BOW ROLLER - SMALL A robust stainless steel bow roller with nylon wheel and rope retaining pin. BG79(A)(1) SMALL BOW ROLLER WHEEL ONLY Manufactured from black nylon. BG79(B) BOW ROLLER - LARGE Robust stainless steel bow roller with nylon wheel and rope retaining pin. BG79(B)(1) LARGE BOW ROLLER WHEEL ONLY Manufactured from black nylon BG79(C) BOW ROLLER WHEEL S/STEEL BUSH ONLY BG79(D) S/STEEL RIVET PIN - Large Bow Roller
Pg 38 of 73 BG79(E) BOW ROLLER-LRG EXTENDED 3mm WALL Large extended robust 3mm stainless steel bow roller with nylon wheel and rope retaining pin. BG79(F) BOW ROLLER-LRG EXTENDED 4.8mm WALL Large extended robust 4.8mm stainless steel bow roller with nylon wheel and rope retaining pin. BG80 SAMPSON POST with 40mm dia post, 85mm square base, 75mm high with black nylon plastic cap. BG80(1) LARGE SAMPSON POST PLUG ONLY Large Sampson post plug only. Manufactured from black nylon BG80(A) SAMPSON POST - SMALL with 25mm dia post, 60mm square base, 56mm high with black nylon plastic cap. BG80(A)(1) SMALL SAMPSON POST PLUG ONLY Small Sampson post plug only. Manufactured from black nylon. BG81 TRAPEZE HANDLE This trapeze handle is made from an acetal resin and is designed from catamaran yachts and any other dinghys. BG82 CANOPY FITTINGS:
Pg 39 of 73 BG82(A)(1) JAWSLIDE WITH EYE END - BLK or WHT Jawslide & eye end, canopy fittings used with 22mm x 1,6mm aluminium or stainless steel tubing. Manufactured from black or white nylon. BG82(A)(2) JAW SLIDE WITHOUT EYE END Jaw Slide without eye end. Manufactured from black or white nylon. BG82(B)(1) DECK HINGE WITH EYE END - BLK or WHT Deck hinge with eye end, canopy fittings used with 22mm x 1,6mm aluminium or stainless steel tubing. Manufactured from black or white nylon. BG82(B)(2) DECK HINGE ONLY Deck hinge only. Manufactured from black or white nylon. BG82(C) EYE END ONLY - BLK or WHT Eye end only, canopy fittings used with 22mm x 1,6mm aluminium or stainless steel tubing. Manufactured from black or white ny lon. BG82(D) SIDE MOUNT HINGE WITH EYE END - BLK or WHT Side mount hinge & eye end, canopy fittings used with 22mm x 1,6mm aluminium or stainless steel tubing. Manufactured from black or white nylon. BG82(E) SIDE MOUNT HINGE WITHOUT EYE END Side mount without eye end. Manufactured from black or white nylon.
Pg 40 of 73 BG82(F) DECK HINGE WITH EYE END & WING NUT Deck hinge with eye end & wing nut. Manufactured from black or white nylon. BG82(G) WING NUT ONLY (WITH 6mm DIA S/ST BOLT) Wing nut only, manufactured from nylon w ith 6mm dia stainless steel bolt. BG82(H) SCREWS FOR JAW SLIDES & DECK HINGES 6mm screws for jaw slides and deck hinges. BG82(I) DECK HINGE WITH WING NUT ONLY Deck hinge with 6mm wing nut only. Manufactured from black or white nylon. BG83 GOOSENECK FOR ROTATING MAST made from 2mm stainless steel with 6 mounting holes and 12mm dia gooseneck pin. BG84 STAINLESS STEEL PINTLES Made from 1.6mm x 25mm stainless steel, with 30mm between straps. Used in conjunction with BG77. Different gap widths are available. BG85(A) ANDY HOOK - SMALL - BLK or WHT Manufactured from black or white nylon. Outside length 38mm
Pg 41 of 73 BG85(B) ANDY HOOK - MEDIUM - BLK or WHT Manufactured from black or white nylon. Outside length 49.9mm BG85(C) ANDY HOOK - LARGE - BLK or WHT Manufactured from black or white nylon. Outside length 62.4mm BG86(A) S/STEEL D EYE BOLT(8mmDIA x 110mm LG) 8mm stainless steel "D" Eyebolt x 110mm long BG86(B) S/STEEL D EYE BOLT (8mm x 170mm LONG) 8mm stainless steel "D" Eyebolt x 170mm long BG86(C) S/STEEL 8mm EYE BOLT(12mm ID x 100mm LG) 8mm stainless steel eyebolt with 21mm ID x 100mm long BG86(D) S/STEEL 6mm EYE BOLT(12mm ID x 55mm LG) 6mm stainless steel eyebolt with 12mm ID x 80mm long BG86(D)(1) S/STEEL 6mm EYE BOLT(12mm IDx 80mm LONG BG86(D)(2) S/STEEL 6mm EYE BOLT (12mm ID x 500mm ) BG86(E) S/STEEL 8mm EYEBOLT no washer no nut 8mm stainless steel eyebolt 12mm ID x 150mm long no washer and nut
Pg 42 of 73 BG86(F) S/STEEL 6mm EYE BOLT no washer & nut 6mm stainless steel eyebolt 12mm ID x 150mm long no washer and nut BG87(A) S/STEEL TANGS FOR MAST & BOOM LIGHT DUTY for masts and booms, made from 1,6mm thick stainless steel 18mm wide with 6,5mm hole. Suitable for Laser I and II etc. BG87(B) S/STEEL TANGS FOR MAST & BOOM HEAVY DUTY for masts and booms made from 2mm thick stainless steel 20mm wide with 10mm hole. Suitable for Catamarans etc. BG88 KICKING STRAP BOOM BRACKET (WITH KEY) made from 1,6mm stainless steel together with key for attaching pulley block. Used on Laser I etc. BG88(A) KEY ONLY Stainless steel key only BG89(A) S/S ADJ'BLE MAST STEP 65mm LG + 5 HOLES made from stainless steel 65mm long with 5 holes spaced at 14mm centres. 20mm wide between flanges, together with 2 off 5mm clevis pins and rings. BG89(B) S/S ADJ'BLE MAST STEP 130mmLG + 10 HOLES made from stainless steel 130mm long with 10 holes spaced at 14mm centres. 20mm wide between flanges, together with 2 off 5mm clevis pins and rings.
Pg 43 of 73 BG90(A) STAINLESS STEEL ROPE SADDLES Well rounded. For use up to 10mm dia rope. Made from 1,6mm thick stainless steel 16mm wide, with 6mm dia clevis pin and ring. Suitable for attaching rope without thimbles. BG90(B) STAINLESS STEEL ROPE YOKES Well rounded. For use up to 10mm dia rope. Made from 1,6mm thick stainless steel 16mm wide, with 6mm dia clevis pin and ring. Suitable for attaching rope without thimbles. BG91 STAINLESS STEEL HOOKS Used on Laser II masts and other dinghies. Made from 1,6mm stanless steel 11mm wide with 5mm mounting holes. BG92 STAINLESS STEEL SHROUD U BOLTS Used on dinghies, such as Laser II etc. Made from 1,6mm stainless steel together with nuts and washers. BG93 STAINLESS STEEL SHROUD ADJUSTERS To be used together with BG92, giving a range of 70mm (2 3/8") adjustment in increments of 9mm (11/16"). BG94 STAINLESS STEEL GOOSENECK FOR FIX MASTS Made from 1,6mm thick stainless steel with solid 10mm dia. pin fitted with thrust washer. Pin dia. increased to 12mm by a nylon sleeve pressed over 10mm dia pin. Suitable for Laser II and other dinghies. BG95 STAINLESS STEEL BOOM STRAP Made from 1,6mm stainless steel 12mm wide with 5mm dia fixing holes. Will fit almost any diameter small dinghy masts and booms. BG96 STAINLESS STEEL MAST STRAPS suitable for mounting jib pulleys etc. Made from 1,6mm stainless steel with 5mm dia mounting hole and 5mm clevis pin with nylon spacer.
Pg 44 of 73 BG97 STAINLESS STEEL MAST TANGS: BG97(A) SGL LIGHT DUTY 12mmW x 40mm LG+2x6 HOLES stainless steel 12mm wide x 40mm long with 2x6mm holes - light duty. BG97(B) SGL L/DUTY 12mmW x 60mmLG + 2x5mm HOLES stainless steel 12mm wide x 60mm long with 2x5mm mounting holes and 1x6mm hole - light duty. BG97(C) SGL HEAVY DUTY 15mmW x 40mmLG + 2x8 HOLES stainless steel 15mm wide x 40mm long with 2x8mm holes - heavy duty. BG97(D) SGL H/DUTY 15mmW x 60mmLG+ 2X6mm HOLES stainless steel 15mm wide x 60mm long with 2x6mm mounting holes and 1x8mm hole - heavy duty. BG97(E) DBL L/ DUTY 12mmW x 40LG + 5mmPIN 1x6mmHOLES stainless steel 12mm wide x 40mm long with 5mm pin and 1x6mm mounting hole - light duty. BG97(F) DBL L/DUTY 12mmW x 60mmLG 5mmPIN 2X5 HOLES stainless steel 12mm wide x 60mm long with 5mm pin and 2x5mm mounting holes - light duty. BG97(G) DBL H/DUTY15mmW x 40mmLG 6mmPIN 1x8mm HOLE stainless steel 15mm wide x 40mm long with 6mm pin and 1x8mm mounting hole - heavy duty. BG97(H) DBL H/DUTY 15mmW x 60mmLG 6mmPIN 2x6mmHOLE stainless steel 15mm wide x 60mm long with 6mm pin and 2x6mm mounting holes - heavy duty.
Pg 45 of 73 BG99 TILLER LOCATING PIN Made from stainless steel. BG100(A)(1) FIXED CAM CLEAT+FERR. FAIRLEAD NO SADDLE Fixed with ferruled fairlead and 5mm mounting holes. WITHOUT stainless steel saddle. BG100(A)(2) FIXED CAM CLEAT WITH FER. FAIRLEAD + SADDLE Fixed with ferruled fairlead and 5mm mounting holes. WITH stainless steel saddle. BG100(B)(1) SWIV. CAM CLEAT + FER. FAIRLEAD NO SADDLE Swivelling on mounting base 40mm square and used with rope up to 10mm dia. WITHOUT stainless steel saddle. BG100(B)(2) SWIVEL CAM CLEAT+ FERRULED F/LEAD+SADDLE Swivelling on mounting base 40mm square and used with rope up to 10mm dia. WITH stainless steel saddle. BG100(C) MNTG PLATE WITH CAM CLEAT ONLY L/H & R/H Mounting plate with cam cleat only (L/H & R/H) BG101(A)(1) MULTIPLE MINI BLOCKS - SGL (METAL SIDES) Single multiple mini block for use with rope up to 8mm dia. Stainless steel sides with plastic sheave wheels. BG101(A)(2) MULTI MINI BLKS- SGL METAL SIDE+BECKETT Single multiple mini block for use with rope up to 8mm dia. Stainless steel sides with plastic sheave wheels with beckett.
Pg 46 of 73 BG101(A)(3) MLTPLE MINI BLOCKS- SGl+CLEVIS PIN&RING Single multiple mini block for use with rope up to 8mm dia. Stainless steel sides with plastic sheave wheels. With top becket only. BG101(A)(4) MINI BLOCKS-SGl+CLEVIS PIN&RING 2 BECK Single multiple mini block for use with rope up to 8mm dia. Stainless steel sides with plastic sheave wheels. With top & bottom becket. Removable clevis pin & ring. BG101(A)(5) MINI BLOCKS-SGl+CLEVIS PIN&RING not/beck Single multiple mini block for use with rope up to 8mm dia. Stainless steel sides with plastic sheave wheels. No top becket. Removable clevis pin & ring. BG101(B)(1) MULTI MINI BLKS - DOUBLE (METAL SIDES) Double multiple mini block for use with rope up to 8mm dia. Stainless steel sides with plastic sheave wheels without beckett. BG101(B)(2) MULTI MINI BLKS- DBL METAL SIDES+BECKETT Double multiple mini block for use with rope up to 8mm dia. Stainless steel sides with plastic sheave wheels with beckett. BG101(C)(1) MULTI MINI BLKS - TRIPLE (METAL SIDES) Triple multiple mini block for use with rope up to 8mm dia. Stainless steel sides with plastic sheave wheels without beckett. BG101(C)(2) MULTI MINI BLKS-TRIPLE METAL SIDES+BECKE Triple multiple mini block for use with rope up to 8mm dia. Stainless steel sides with plastic sheave wheel with beckett. BG101(D)(1) SINGLE PULLEY 50mm WITHOUT BECKET Single 50mm pulley without beckett
Pg 47 of 73 BG101(D)(2) SINGLE PULLEY 50mm WITH BECKET Single 50mm pulley with beckett BG101(E)(1) DOUBLE PULLEY 50mm WITHOUT BECKET Double 50mm pulley without beckett BG101(E)(2) DOUBLE PULLEY 50mm WITH BECKET Double 50mm pulley with beckett BG102 STAINLESS STEEL BOW FITTINGS Made from 1,6mm stainless steel and with 4 adjustment holes 6mm dia. with 2 clevis pins and 100mm long stem straps. BG103 TUBULAR JAM CLEAT (MEDIUM 65mm) Manufactured from black Hostaform 65mm long with 4mm mounting holes. Suitable for rope up to 6mm dia. BG104(A) S/STEEL & PLASTIC TRAPEZE HARNESS HOOK stainless steel hook welded to stainless steel plate and moulded into plastic glassfilled nylon backing plate. BG104(B) S/STEEL TRAPEZE HARNESS HOOK stainless steel hook welded to stainless steel plate only. Grade 316 Stainless Steel.
Pg 48 of 73 BG105 STAINLESS STEEL ROPE HOLDER Stainless steel rope holder fits rope up to 19mm BG106(A) PULPIT RAIL CLAMP - 25mm DIA TUBE pulpit rail clamp manufactured from black nylon. 25mm dia tube BG106(B) PULPIT RAIL CLAMP - 19mm DIA TUBE pulpit rail clamp manufactured from black nylon. 19mm dia tube BG107 SMALL SCREWED COCKPIT DRAIN/SKINFITTING 48mm dia head x 25mm dia thread, 40mm thread length to fit 19mm ID plastic pipe. BG107(A) COCKPIT & TRANSOM DRAIN 32mmX120mm LONG 1" BSP THREAD - 32mm OD x 120mm LONG can be used with BG122(c) BG107(B) COCKPIT & TRANSOM DRAIN 26mmX120mm LONG 3/4" BSP THREAD - 26mm OD x 120mm LONG can be used with BG122(a) BG108 S/STEEL CHEEK BLOCKS- FLAT OR CURVED BASE See various sizes below :-
Pg 49 of 73 BG108(A) SGL 80mmLG x 25mmW + 25mm SHEAVE cheek block 80mm long x 25mm wide with 25mm sheave wheel with flat or curved base. Suitable for rope up to 12mm dia. BG108(B) SINGLE 90mmLGx45mmW + 44mm SHEAVE cheek block 90mm long x 45mm wide with 44mm sheave wheel with flat or curved base. Suitable for rope up to 12mm dia. BG108(C) DBL 80mm LG x 25mmW + 25mm SHEAVE cheek block 80mm long x 25mm wide with 25mm sheave wheel with flat or curved base. Suitable for rope up to 12mm dia. BG108(D) DBL 90mmLG x 44mmW + 44mm SHEAVE cheek block 90mm long x 44mm wide with 44mm sheave wheel with flat or curved base. Suitable for rope up to 12mm dia BG109(A) OPTOMIST BOOM GOOSENECK PLUG + HOLE Optimist boom gooseneck plug or end plug WITH hole. Outside Dia 45mm Inside Dia 41mm with a wall thickness of 2mm. Manufactured from black nylon. BG109(B) OPTOMOST BOOM GOOSENECK PLUG NO HOLE Optimist boom gooseneck plug or end plug WITHOUT hole. Outside Dia 45mm Inside Dia 41mm with a wall thickness of 2mm. Manufactured from black nylon. BG110(A) CATAMARAN JIB SLIDE(GLASSFILLED NYLON) Manufactured from glassfilled nylon.
BG110(B) BOAT PARTS CATAMARAN JIB SLIDE(S/STEEL WITH SWIVEL) Made from stainless steel with swivel for loose pulley. Pg 50 of 73 BG111 STAINLESS STEEL MAST STEP made from 5mm stainless steel, overall height 130mm, step width 110mm. BG112 ST/STEEL CAT.TILLER EXTN YOKE CLEVIS+BOLT tiller extension yoke with clevis pin and bolt. BG113 S/STEEL CLEW BLOCK +PLASTIC SHEAVE WHEEL stainless steel with plastic delrin sheave wheel, suitable for rope up to 12mm dia. BG114 ST/STEEL HOUND FITTING made from 1,6mm stainless steel, 25mm wide with 6mm monting holes. Suitable for masts of 70-80mm dia. BG115(A) SKID COVER PLATE(LG 73mmLGx 37.5Wx20mm H made from 1,2mm stainless steel 73mm long x 37,5mm wide x 20mm hole BG115(B) SKID COVER PLATE(SML 50mmLG x 28mmW x 12mm H made from 1,2mm stainless steel 50mm long x 28mm wide x 12mm hole
Pg 51 of 73 BG116 PLASTIC HINGES WITH ST/STEEL PINS: Plastic hinges - see various sizes below :- BG116(A) SMALL HINGE - 40mm LGx18mmW - BLK or WHT plastic hinge 40mm long x 18mm wide. Made form nylon with s/steel pins. BG116(B) MEDIUM HINGE - 55mm LONG x 19mm WIDE - BLK or WHT plastic hinge 55mm long x 19mm wide. Made form nylon with s/steel pins. BG116(C) LARGE HINGE - 70mm LG x 25mm WIDE - BLK or WHT plastic hinge 70mm long x 25mm wide. Made form nylon with s/steel pins. BG116(D) HEAVY DUTY HINGE - 78mm LG x 43mm WIDE - BLK or WHT heavy duty plastic hinge 78mm long x 43mm wide. Made form nylon with s/steel pins. BG117(A) STAINLESS STEEL S HOOK -6mm stainless steel 6mm "S" hook BG117(B) STAINLESS STEEL S HOOK- 8mm stainless steel 8mm "S" hook
Pg 52 of 73 BG118 ROPE AND WIRE SHEAVE BOXES: BG118(A) ROPE & WIRE SHEAVE BOXES+25mm P/SHEAVE Rope and wire sheave box with 25mm plastic sheave, suitable for rope up to 12mm dia. BG118(A)(1) DOUBLE ROPE & WIRE SHEAVE BOX 25mm SHEAVE Double rope and wire sheave box with 25mm plastic sheave, suitable for rope up to 12mm dia. BG118(B) ROPE & WIRE SHEAVE BOX+44mm P/SHEAVE Rope and wire sheave box with 44mm plastic sheave, suitable for rope up to 12mm dia. BG118(B)(1) DOUBLE ROPE&WIRE SHEAVE BOX 44mmSHEAVE double rope and wire sheave box with 44mm plastic sheave, suitable for rope up to 12mm dia. BG118(C) ROPE & WIRE SHEAVE BOX+25mm BRASS SHEAVE Rope and wire sheave box with 25mm brass sheave, suitable for cable up to 6mm dia. BG118(C)(1) DOUBLE ROPE&WIRE SHEAVE BOX 25mmB/WHEEL Double rope and wire sheave box with 25mm brass sheave, suitable for cable up to 6mm dia.
Pg 53 of 73 BG118(D) ROPE & WIRE SHEAVE BOX + 44mm B/SHEAVE Rope and wire sheave box with 44mm brass sheave, suitable for cable up to 6mm dia. BG118(D)(1) DOUBLE ROPE&WIRE SHEAVE BOX 44mm B/WHEEL double rope and wire sheave box with 44mm brass sheave, suitable for cable up to 6mm dia. BG119 WINDSCREEN BRACKET To fit 19mm (3/4" ) tube at an angle of 11" from the deck. BG120 STAINLESS STEEL MIRROR 100 x 100 100 x 100mm square. Made from 20 gauge stainless steel with centre sight hole. BG120(A) STAINLESS STEEL MIRROR 80 x 250 80 x 250mm square. Made from 20 gauge stainless steel with centre sight hole. BG121 ST/STEEL SWIVELLING CLEAT BASE Slotted holes for various size cleats. Base 45mm dia with plastic pad. 2 x 5mm bolts and washers and saddle supplied. NB No cleat supplied. BG122(A) EXPANDING RUBBER TRANSOM DRAIN BUNG +NUT - BLK or WHT with 6mm stainless steel nut and bolt to fit 22mm ID tube BG122(B)
Pg 54 of 73 BG122(B) S/S TUBE-50mm LG 23mm ID FOR RUBBER BU stainless steel tube 50mm long 22 ID to fit 122(a) BG122(B)(1) S/STEEL TUBE 75mm LONG stainless steel tube 75mm long 23 ID to fit x 25mm OD BG122(B)(2) S/STEEL TUBE 60mm LONG x23 mm I.D stainless steel tube 60mm long 23 ID to fit x 25mm OD BG122(B)(3) S/STEEL TUBE 65mm LONG x 23mm I.D. stainless steel tube 63mm long 23 ID to fit x 25mm OD
Pg 55 of 73 BG122(C) EXP.RUBBER TRANSOM DRAIN BUNG+6mm S/S NU - BLK or WHT with 6mm stainless steel nut and bolt to fit 19mm ID tube BG122(d) BG122(D) S/S TUBE-40mm LG 19mmID 22mmOD FOR R/BUN stainless steel tube 40mm long 19 ID to fit 122(c) BG123(A) SML SCUPPER PLASTIC BALL + SEAL with hard plastic ABS ball and rubber seals. Flange size 125mm x 75mm Hole size 85mm x 40mm Mounted Protrusion 90mm Ball size 60mm dia Overall Height with Cage 160mm BG123(B) PLASTIC BALL (ABS) ABS ball 60mm dia NB - please note it cannot be used without a rubber seal. BG123(B)(1) LARGE SCUPPER SEAL (RUBBER SEAL) scupper rubber seal only. BG123(B)(2) SMALL SCUPPER SEAL (RUBBER SEAL) scupper rubber seal only.
Pg 56 of 73 BG123(C) SCUPPER CAGE ONLY - SMALL small cage only - see BG123(a) BG123(D) LARGE SCUPPER PLASTIC BALL & SEAL complete with hard plastic ABS ball and rubber seal. Flange size 190mm x 115mm - Hole size 130mm x 60mm Mounted Protrusion 110mm - Ball size 60mm dia Overall Height with Cage 190mm BG123(E) SCUPPER CAGE ONLY - LARGE large cage only - see BG123(d) BG123(F) CLEAR INFLATABLE BOAT SCUPPER +HARD BALL with hard ball and rubber seal.flange size 115mm x 115mm Hole size 42mm dia. Mounted Protrusion 70mm Ball size 50mm dia Overall Height 115mm BG123(G) WHITE INFLATABLE BOAT SCUPPER +HARD BALL with hard ball and rubber seal. Flange size 115mm x 115mm Hole size 42mm dia Mounted Protrusion 70mm Ball size 50mm dia Overall Height 115mm
Pg 57 of 73 BG123(H) SMALL SCUPPER PLASTIC BALL & SEAL SET plastic scupper ball and seal set. BG123(I) LARGE SCUPPER PLASTIC BALL & SEAL SET plastic scupper ball and seal set. BG124 ST/STEEL PINTLE FOR OPTIMIST for optimist made from 1,6mm x 15mm wide with 12,7mm between straps. BG125 ST/STEEL GUDGEON+BACKING PLATE FOR OPTIMIST Stainless steel gudgeon for optimist made of 2mm material supplied with backing plates. BG126 S/STEEL MAST STEP FOR OPTIMIST Adjustable mast step for optimist made from 1,6mm stainless steel. For mast of 48mm dia. BG127(A) 10mm BATTEN END SET to fit 10mm battens - curved ends Manufactured from nylon. BG127(B) 12mm BATTEN ENDS to fit 12mm battens. Manufactured from nylon.
Pg 58 of 73 BG127(C) BATTEN ENDS WITH SLOTS batten ends with slots to fit 16mm battens. Manufactured from nylon. BG128(A) SMALL BATTEN PROTECTOR(OVAL-HOBIE JIB) oval batten protectors - hobie jib 2 per pair. Manufactured from nylon. BG128(B) MEDIUM BATTEN PROTECTOR (HOBIE) batten protector - hobie 2 per pair. Manufactured from nylon. BG128(C) LARGE BATTEN PROTECTOR(MAIN SAIL HOBIE) batten protectors - hobie main sail. 2 per pair. Manufactured from nylon. BG129 HEADBOARD (140mm x 140mm LAFIT) 140mm x 140mm (lafit). Manufactured from nylon. BG130 CLEW PLATE (PLASTIC LAFIT) - BLK or WHT Plastic Clew plate with 5 mounting holes (lafit). Manufactured from nylon. BG131 CUP HOLDER - BLK or WHT used to hold soft drinks in cans or bottles. Can be fitted to gunwale or decks of boats. Manufactured from black or white nylon. BG132 PRAWN PUMP Blue PVC Tube with stainless steel shaft.
Pg 59 of 73 BG133(A) 50mm S/S SNAP HOOK German quality snap hooks made from AiSi 316 stainless steel. A breaking strength of 400kg. BG133(B) 60mm S/S SNAP HOOK German quality snap hooks made from AiSi 316 stainless steel. A breaking strength of 530kg. BG133(C) 70mm S/S SNAP HOOK German quality snap hooks made from AiSi 316 stainless steel. A breaking strength 640kg. BG133(D) 80mm S/S SNAP HOOK German quality snap hooks made from AiSi 316 stainless steel. A breaking strength of 960kg. BG133(E) 100mm S/S SNAP HOOK German quality snap hooks made from AiSi 316 stainless steel. A breaking strength of 1420kg. BG133(F) 120mm S/S SNAP HOOK German quality snap hooks made from AiSi 316 stainless steel. BG134 MOUTH FOG HORN Mouth fog horn
Pg 60 of 73 BG135 STEERING PULLEY BLOCK For cable steering systems. Plastic sheave wheel 39mm dia with s/s sides and swivelling top. BG135(A) STEERING PULLEY U BRACKETS ONLY stainless steel u brackets for steering pulley BG136 JERRY CAN CAP WITH FUEL PICK-UP (OLD) Jerry can fuel pick ups is corrosion-free with plastic cap can elbow connector. The pick-up is fitted with a nylon down tube and no fuel filter. (Old Style) BG136(A) JERRY CAN CAP ONLY WITH SEALING RING-OLD cap only with sealing ring (Old Style). BG136(A)(1) JERRY CAN CAP SEALING RING ONLY seal ring for jerry can cap only. (old style) BG136(B) JERRY CAN CAP WITH FUEL PICK-UP - ADDIS 25L CAN 25l Addis Jerry can cap with fuel pick-up. BG136(B)(1) JERRY CAN FUEL PICK- UP (ADDIS 25L CAN) LOOSE COMPONENTS, NO CAP 25l Addis Jerry can fuel pick-up loose components no cap. BG136(C) JERRY CAN CAP ONLY WITH SEAL RING -ADDIS 25L CAN 25l Addis can cap only with sealing ring.
Pg 61 of 73 BG137(A) ROD HOLDER ideal for fresh or salt water use. Can be mounted port or starboard at any angle. Made from high impact plastic for corrosion free operation. BG138 S/STEEL D RINGs: (see price list for sizes) BG139(A) DOUBLE PLASTIC PADDLE WITH ALU STEM with aluminium stem which splits in the middle 2,05m long including blades. BG139(B) SINGLE PLASTIC PADDLE WITH ALU STEM with aluminium stem and plastic T piece handle 1,05m long including blade. BG139(B)(1) SINGLE PLASTIC PADDLE ALU STEM (1.28m) with aluminium stem and plastic T piece handle 1,28m long including blade. BG140 HASP & STAPLE (Plastic BLK or WHT) Made from Nylon with Brass pin. BG141(A) 6 INSPECTION HATCH COVER WITH SEAL RING - BLK or WHT Hatch cover and outer ring, complete with sealing "O" ring. Made from ABS plastic
Pg 62 of 73 BG141(A)(1) 6 O RING ONLY "O" ring seal only BG141(A)(2) 6 HATCH COVER LID ONLY - BLK or WHT Hatch cover lid only. Made from ABS material BG141(A)(3) 6 HATCH COVER RING ONLY - BLK or WHT Outer Hatch ring only without "O" ring BG141(B) 4 INSPECTION HATCH COVER WITH SEAL RING - BLK or WHT Hatch cover and outer ring, complete with sealing "O" ring. Made from ABS plastic BG141(B)(1) 4 O RING ONLY "O" ring seal only BG141(B)(2) 4 HATCH COVER LID ONLY - BLK or WHT Hatch cover lid only. Made from ABS material BG141(B)(3) 4 HATCH COVER RING ONLY - BLK or WHT Outer Hatch ring only without "O" ring BG141(C) 6 CLEAR INSPECTION HATCH COVER+RING Hatch cover and outer ring, complete with sealing "O" ring. Made from ABS plastic
Pg 63 of 73 BG141(C)(1) 6 CLEAR HATCH COVER ONLY Hatch cover lid only. Made from ABS material BG141(D) 4 CLEAR INSPECTION HATCH COVER+RING Hatch cover and outer ring, complete with sealing "O" ring. Made from ABS plastic BG141(D)(1) 4 CLEAR HATCH COVER ONLY Hatch cover lid only. Made from ABS material BG141(E) 8 HATCH COVER WITH SEALING RING - BLK or WHT Hatch cover and outer ring, complete with sealing "O" ring. Made from ABS plastic BG141(E)(1) 8 O RING ONLY "O" ring seal only BG141(E)(2) 8 HATCH COVER LID ONLY (ABS) Hatch cover lid only. Made from ABS material BG141(E)(3) 8 HATCH COVER RING ONLY Outer Hatch ring only without "O" ring BG141(F) 8 CLEAR HATCH COVER & SEALING RING Hatch cover and outer ring, complete with sealing "O" ring. Made from ABS plastic BG141(F)(1) 8 CLEAR HATCH COVER LID ONLY(Polycarb) Hatch cover lid only. Made from ABS material
Pg 64 of 73 BG142(A) 90 DEGREE ROD HOLDER - Open - BLK or WHT Rod holder 90 degree, made from ABS material. Open bottom with bar across to prevant rod going straight through. BG142(A)(1) 90 DEGREE ROD HOLDER - Closed - BLK or WHT Rod holder 90 degree, made from ABS material. Completely sealed off bottom. BG142(B) 50 DEGREE ROD HOLDER - Open - BLK or WHT Rod holder 50 degree, made from ABS material. Open bottom with bar across to prevant rod going straight through.
Pg 65 of 73 BG142(B)(1) 50 DEGREE ROD HOLDER - Closed - BLK or WHT Rod holder 50 degree, made from ABS material. Completely sealed off bottom. BG143 JIGGLE PUMP Jiggle, syphon pump is manufactured from Nylon with Stainless Steel spring. Can be used with most petroleums and chemical products. Common uses -recreational vehicles, boats, lawnmowers, bikes & farming equipment. Supplied in storage bag. BG143(A) JIGGLE PUMP BODY ONLY Manufactured from Nylon with Stainless Steel spring. BG143(B) JIGGLE PUMP WITH NO PACKAGING Jiggle, syphon pump is manufactured from Nylon with Stainless Steel spring. Can be used with most petroleums and chemical products. Common uses -recreational vehicles, boats, lawnmowers, bikes & farming equipment. BG144 PLASTIC MOTO MUFF Used to flush outboard motors with fresh water after running in salt water. Frame made from Glassfilled Nylon, with rubber cups and quick clip attachment for hose fittings. Fits all outboard motors.
BG145 BOAT PARTS BOAT HOOK - TELESCOPIC Pg 66 of 73 Telescopic boat hook 28mm dia outer aluminium tube, 11.1meter long qirh 25mm dia inner aluminium tube 900mm long. Extends from 1.3meters to 2 meters. With Nylon locking nut, hook and rubber handle. BG145(A) BOAT HOOK - 1.8m Boat hook 1.8meters long (floating) 25mm aluminium tube with plastic hook and rubber handle. BG145(A)(1) PLASTIC HOOK ONLY Hook only made from Polypropolene. BG146 6mm Dia SHOCKCORD AND CLAMP (PLASTIC) To be used with shockcord and rope 6mm dia. Made from Nylon BG147 CANOE RUDDER STOCK Stainless steel side cheeks with aluminium rudder blade 400mm long from under side cheeks. 10mm dia stainless steel pivot pin 110mm long. BG148 ROPE REEL Glassfilled Nylon drum sides and stand with 38mm dia stainless steel shaft and handle. Drum size:- 290mm dia X 300mm long (inside) Capacity:- 120meters X 12mm dia rope Overall size:- 460mm length X 290mm width X 330mm Height
Pg 67 of 73 BG148(A) ROPE REEL HANDLE ONLY Stainless steel handle only BG149 6mm CABLE ENTRY COVER PLATE ANODISED 6mm cable entry cover plate. Made from anodised aluminium. BG149(A) 6mm CABLE ENTRY COVER PLATE S/STEEL 6mm cable entry cover plate. Made from 316 stainless steel 0.9mm thickness. BG150 STAINLESS STEEL BUCKLE 5.2mm stainless steel buckle. BG151(A) LEVER LOCK TIE DOWN STRAP Comp NO strap BG151(B) LEVER LOCK TIE DOWN+STRAP 5m ONE/Pack BG151(B)(1) LEVER LOCK TIE DOWN+STRAP 5m TWO/Pack BG151(C) LEVER LOCK TIE DOWN+STRAP 3m ONE/Pack
Pg 68 of 73 BG151(C)(1) LEVER LOCK TIE DOWN+STRAP 3m TWO/Pack BG152(A) ALU SLIDE + SOLID FOOT PEDAL&40cm Track BG152(B) HINGED FOOT PED ALU SLIDE 40cm ALU TRAC BG152(C) RUDDER TAIL PIECE (S/STEEL)
Pg 69 of 73 Awning & Canopy Fittings
Pg 70 of 73
Pg 71 of 73
Pg 72 of 73
Pg 73 of 73