On-Site Storage The latest JOBOX innovations for unmatched security, versatility and durability New Textured Powder Paint Finish For Improved Durability* 10x 5x 2x 2x Site-Vault Security System 50% more locking points than competitive systems n 3-Point lock engagement is virtually impossible to bend or pry open 10x Corrosion Resistance 5x Abrasion Resistance 2x Chip Resistance 2x Scratch Resistance Fork lift from any side Skid Bolsters n 7-Gauge, one-piece steel bolster resists damage when dropped * Test comparisons provided by powder paint manufacturer.
ON-SITE STORAGE Unmatched Security, Versatility and Durability Site-Vault Security System Skid Bolsters 50% more locking points than competitive locking systems n 3-Point lock engagement is virtually impossible to bend or pry open Patent Pending Fork lift from any side n 7-Gauge, one-piece, steel bolster resists damage when dropped Patent Pending
Chests Site-Vault Security System Patent pending Skid Bolsters Patent pending 3-Point lock engagement n Three locking points versus competitive locking systems that only feature two locking points n Padlock is completely housed in a fully-welded 14 gauge steel casing making it nearly impossible to pry, cut or knock out in an attempted break-in n Fluorescent orange tape indicates when the chest is unlocked, making it easy to check at night and from a distance Forklift from any side n Easily load and unload heavy chests from trucks or warehouse n Safely move loaded chests on site or to upper levels of buildings n One piece skid bolster reinforces entire box bottom for heavier load capacity n Uses 5/16 self-tapping screws for caster installation 2
Grip Rite Channel Full-Length A-Frame Lid Bolster 12-Gauge Steel Lock Console with Three Locking Points Site-Vault with Bolt Cutter Proof Lock Housing Fully Welded Padlock Housing Formed Lid Sides Welded to Lid Bolster Fully Staked and Welded 3/8 Hinge with 1/4 Pin and 1 Knuckles 1 Locking Arms Welded Corner Gussets Reinforce Body Recessed Handles Skid Bolster Formed-In Reinforcements Strengthen Skid Bolsters Full-Length Reinforcing Channel 7-Gauge One-Piece Steel Bolster with Caster Holes Uses 5/16 Self-Tapping Screws for Caster Installation Heavily Reinforced Lid n Lid bolster resists bending from cargo placed on top of the box and from attempted break-ins Recessed Handles n Extra tall and deep recess areas prevent pinched fingers and damage to the handle Grip Rite Channels n Easy to grip the lid when wet or wearing gloves. Also provides lid reinforcement. Staked and Welded Hinge n Rugged 14-gauge steel, 3/8 continuous hinge with 1/4 steel pin and extralarge 1 knuckles. Staked and welded pin cannot be driven out. 3 horseshoe weld on both hinge ends. 3
PIANO LID BOXES Site-Vault Security System 50% more locking points than competitive locking systems Skid Bolsters Fork lift from any side n 3-Point lock engagement is virtually impossible to bend or pry open n 7-Gauge, one-piece steel bolster resists damage when dropped RECESSED HandleS n Extra tall and deep recess areas prevent pinched fingers and damage to the handle 2X THICKER SIDE WALLS n Full pry bar and weather resistant design allows the lid to overlap side walls when closed n Two deep side wall storage bins TILT-N-Stow shelf n Bottom shelf lifts up and makes it easy to load and unload objects from the base Gas spring LID LIFT guard n Gas springs embedded in sidewall and guard design protect springs, strengthens sidewall and provides 17% more useable shelf space 4
Recessed Handles Full-Length Lock Console with Three Locking Points Formed Lid Sides Welded to Lid Bolster Resists Pry Bar Entry Fully Staked and Welded Hinge with 3/8 Hinge, 1/4 Pin and 1 Knuckles Recessed Handles Door Opens a Full 90 Site-Vault with Bolt Cutter Proof Lock Housing Fully Welded Padlock Housing Quick Release Gas Spring Removal Built-In Storage Bins Lower Front Panel to Reduce Lifting Tilt-N-Stow Shelf Skid Bolster Formed-In Reinforcements Strengthen Skid Bolsters 7-Gauge One-Piece Steel Bolster with Caster Holes Uses 5/16 Self- Tapping Screws for Caster Installation DROP-FRONT PIANO BOXES feature reinforced door for easy loading and unloading of heavy equipment. Available in 60 and 74 length models Full-length stainless steel hinge resists corrosion Pad-lockable drop down door prevents access to heavy tools and equipment while the piano box is open Efficient tapered ramp design makes it easy to roll heavy objects into storage HIGH-CAPACITY PIANO BOX features 75% more capacity than our popular model 1-685990. Nearly 5 tall sidewalls organize more tools and equipment on the job site Three 500 lb. Capacity, full width rear shelves Six Built-In sidewall storage bins Punched Holes for hanging safety harnesses Tilt-N-Stow bottom shelf for easier access to base 5
FIELD OFFICE One-Handle Lock Operation Opens both bottom and top doors n Handle slides down to release bottom doors and slides up to release top door Steel Peg-Board and Deep Shelf Bright White desktop for improved visibility n Provides hanging storage and additional space for larger items office center with extra large desktop n Can be propped into a flat or slanted position and provides pad-lockable storage underneath EZ-LOADER SKID BOLSTERS n Fork lift from any side n 7-Gauge, one-piece steel bolster resists damage when dropped bottom door shelves n Convenient for storing small parts and tools while reinforcing doors 30 Cu. Ft. side storage locker n Stores items up to 60 in length and is opened from a lanyard inside the lower cabinet for additional security 6
Lid Safety Pin Latch Fastened Stainless Steel Hinges Resists Separation and Corrosion Overhang Tube Storage Small Parts Hanging Holes Steel Peg-Board Rain Gutters Large Lifting Handles Side Wall Tube Storage Lockable, Large Desktop can be Propped into a Flat Working Position Stainless Steel Door Hinges Resist Rust Built-In Door Storage Bins 30 Cu. Ft. Storage Locker One Handle Lock Formed-In Reinforcements Strengthen Skid Bolsters Skid Bolster Uses 5/16 Self- Tapping Screws for Caster Installation Lid safety pin latch n Pin secures open door support arm to bracket and sidewall for safety Full length heavy-duty lid and door hinges n Corrosion resistant, high-strengh lid and door hinges provide enhanced durability and security 7
ON-SITE STORAGE Site-Vault Security System 50% more locking points than competitive locking systems n 3-Point lock engagement is virtually impossible to bend or pry open Skid Bolsters Fork lift from any side n 7-Gauge, one-piece, steel bolster resists damage when dropped Usable Shipping Shipping Model # Description UPC L W h Cu. Ft. Cu. Ft. Wt. (Lbs.) Heavy-Duty Chests 1-652990 36 Long Chest 0-43419-93110-7 36 20 23 3/4 8.3 10.0 98.0 1-653990 42 Long Chest 0-43419-93111-4 42 20 23 3/4 9.3 13.8 118.0 1-654990 48 Long Chest 0-43419-93112-1 48 24 27 3/4 15.4 22.3 148.0 1-655990 60 Long Chest 0-43419-93113-8 60 24 27 3/4 19.3 27.3 182.0 1-656990 48 Long Chest 0-43419-93114-5 48 30 33 3/8 24.3 33.3 190.0 1-658990 72 Long Chest 0-43419-93115-2 72 24 27 3/4 23.2 30.9 220.0 Usable Shipping Shipping Model # Description UPC L W h Cu. Ft. Cu. Ft. Wt. (Lbs.) Piano Lid Boxes 1-681990 Piano Lid 0-43419-93117-6 48 31 50 38.0 49.0 286.0 1-682990 Piano Lid 0-43419-93118-3 60 31 50 47.5 60.0 326.0 1-688990 Piano Lid 0-43419-93119-0 60 31 38 34.5 45.0 283.0 1-689990 Piano Lid 0-43419-93120-6 74 31 50 56.5 73.0 423.0 HIGH-CAPACITY PIANO LID BOX 1-685990 High-Capacity Piano Lid 0-43419-93213-5 74.5 35.5 60.25 85.7 92.2 500.0 DROP FRONT PIANO LID BOX 1-683990 60 Drop Front Piano Lid 0-43419-93151-0 60 30 50 47.5 60.0 405.0 1-684990 74 Drop Front Piano Lid 0-43419-93152-7 74 30 50 56.5 73.0 468.0 Usable Shipping Shipping Model # Description UPC L W h Cu. Ft. Cu. Ft. Wt. (Lbs.) Field Office 1-674990 Field Office 0-43419-93121-3 63 42 80 104.0 123.5 660.0 All information on this sheet is subject to change without notice. For ordering, use Part# LIT136 2007 Delta Consolidated Industries, Inc. www.deltastorage.com Delta Consolidated Industries, Inc. PO BOX 1846 Jonesboro, AR 72403-1846 800-643-0084 Fax 870-935-4994 8
SLOPE LID CHEST Unmatched Security, Versatility and Durability Site-Vault Security System 50% more locking points than competitive locking systems n 3-Point lock engagement is virtually impossible to bend or pry open Fork lift from any side Skid Bolsters n 7-Gauge, one-piece steel bolster resists damage when dropped P R E M I U M S T O R A G E S O L U T I O N S
ON-SITE STORAGE 12-Gauge Steel Lock Console with Three Locking Points Formed Lid Sides Welded to Lid Bolster Fully Staked and Welded 3/8 Hinge with 1/4 Pin and 1 Knuckles 1 Locking Arms Fully Welded Padlock Housing Site-Vault with Bolt Cutter Proof Lock Housing Grip Rite Channel Welded Corner Gussets Reinforce Body Skid Bolster Fork Lift Accessible From All Sides Formed-In Reinforcements Strengthen Skid Bolsters Full-Length Reinforcing Channel Tilt-N-Stow Hinged Shelf lifts up and out of the way 7-Gauge One-Piece Steel Bolster with Caster Holes Uses 5/16 Self-Tapping Screws for Caster Installation Recessed Handles Usable Shipping Shipping Model # UPC Length Width Height Cu. Ft. Cu. Ft. Wt. (Lbs.) Slope Lid Chest 1-680990 0-43419-93316-9 60 30 39 1/2 32.7 45.5 345.0 All information on this sheet is subject to change without notice. For ordering, use Part# LIT144 2007 Delta Consolidated Industries, Inc. www.deltastorage.com Delta Consolidated Industries, Inc. PO BOX 1846 Jonesboro, AR 72403-1846 800-643-0084 Fax 877-356-1879 P R E M I U M S T O R A G E S O L U T I O N S
INDUSTRIAL 2-DOOR, 8-DRAWER CABINET Unmatched Security, Versatility and Durability High Load Capacity Drawers n Exclusive drawer design supports up to 60% greater loads n Three 2 1/2 deep drawers feature 75 lb. load capacity n Five 5 1/2 deep drawers feature 125 lb. load capacity New Anti-Tip Skid Bolster n Skid bolster extends to the front to help prevent tipping n Casters install with 5/16 self-tapping bolts n Now fork lift accessible from all sides n Patent pending P R E M I U M S T O R A G E S O L U T I O N S
ON-SITE STORAGE Fully Welded Padlock Housing Six, 5/8 Steel Locking Pin Security Eight built-in door shelves. Extra deep 4 1/2 Top Door Shelves Grip-Rite Door Channels Formed-In Lifting Handles Fork Lift Accessible From All Sides Hand or Foot-Operated Door Latch Release System NEW Anti-Tip Skid Bolster Welded Corner Gussets Reinforce Body Fully Staked and Welded 3/8 Hinge with 1 Knuckles and Hardened 1/4 Pin Drawers Fully Extend for Easy Access Three 2 1/2 Drawers support 75 lbs. and Five 5 1/2 Deep Drawers Support Up To 125 lbs. Uses 5/16 Self-Tapping Screws for Caster Installation REINFORCED SHELF FRAME n Shelves are supported by independently reinforced frame mounted inside cabinet RUGGED 3/8 LATCH HOOKS n Extra heavy duty door latch hooks resist repeated pry bar attempted break-ins. Recessed Grip-Rite door channels add reinforcement to doors EXPANDED DOOR SHELVES n Top shelf inside both doors is expanded to hold oversized objects and tools REINFORCED FRAME n Heavy-gauge, 7 full corner gussets resist warping and give added strength to our one-piece, formed and rolled steel cabinet PADLOCK PROTECTED n 5/8 round solid steel locking pins along front of cabinet creates virtually impossible to break-in storage REINFORCED SHELVEs n Cabinet shelves are braced on their undersides with a heavy-gauge steel V-Shaped brace Usable Shipping Shipping Model # UPC Drawers (24 D; 21 1/2 W) A B C D E Cu. Ft. Cu. Ft. Wt. (Lbs.) Drawer Cabinet 1-679990 0-43419-93219-7 Three 2 1/2 Deep; Five 5 1/2 Deep 60 3/4 60 1/8 30 1/4 53 1/4 25 3/4 58.7 62.5 610.0 All information on this sheet is subject to change without notice. For ordering, use Part# LIT141 2007 Delta Consolidated Industries, Inc. www.deltastorage.com Delta Consolidated Industries, Inc. PO BOX 1846 Jonesboro, AR 72403-1846 800-643-0084 Fax 877-356-1879 2 P R E M I U M S T O R A G E S O L U T I O N S