Welcome to GERBER TABLES Your campground and rv park essentials company Meeting the needs of the leisure industry since 1969
Why professionals in the industry choose GERBER picnic tables One-piece welded end frame Slides easily for mowing Safe & stable with our No-tip design Center channel for a flatter, stonger top Walk-in design Rust resistant enamel paint or hot dipped galvanized finish All fasteners are zinc plated or stainless steel Four different metal strengths Overall dimensions of classic tables Seat to seat 61 Top height 27 Seat height 17 One-piece welded end frame Our frames are all welded for a solid structure that is built to last. Slides easily for mowing Many park owners push our tables out of the way with their mowers to save time when cutting the grass. Safe & stable with No-Tip design The table remains safe and stable even with one side being used. Center channel We use a center channel to tie the three top boards together to reduce the amount of board warpage over time. Walk-in design There is no need to step over any parts of the metal frame or swing your legs over the seat to sit at our table. Rust resistant paint We use rust resistant enamel paint on our tables. We know over the course of many years scatches will happen. Our paint makes them easy to fix unlike other finishes. Hot dipped galvanzing Our hot dipped galvanizing is done after the end frame is welded together. Our process protects the inside and the outside of the frame for many years of service. Fasteners We offer your choice of lags screws, carriage bolts or elevator bolts on most of our tables and benches. Four different metal stengths 14 gauge tube 1 1/2 OD 11 gauge tube 1 1/2 OD 1 5/8 OD Schedule 40 pipe 2 3/8 OD Schedule 40 pipe WARRANTY: One year limited warranty on all metal frames against failure due to corrosion/ natural deterioration or manufacturing defects. This warranty does not include any cosmetic issues or wear and tear from normal use.
Picnic Tables Frames When you purchase a Gerber classic picnic table you receive two one-piece welded end frames, 2 braces, one center channel and the hardware to fasten it together. We only use prime grade hot rolled steel that is made in the USA. You have your choice of finishes: 1. Hot dipped galvanized - Our galvanizer uses the ASTM A123 specifications for all of our products. 2. Painted brown, green or black with a rust resistant enamel paint. Our products receive an acid bath prior to painting for better adhesion. 14 Series Our 14 series frames are ideal for campgrounds, resorts, RV parks, picnic groves and other areas that are semi supervised. They have all of the features listed on the prior page. The frames are constructed with 14 gauge 1 1/2 OD steel tubing with 1 1/2 x 1 1/2 x 1/8 steel angle iron for the top and seat supports. 11 Series Our 11S series frames are ideal for heavy duty service such as public parks and unsupervised areas. The frames are constructed with 11 gauge 1 1/2 OD steel tubing with 1 3/4 x 1 3/4 x 3/16 steel angle iron for the top and seat supports. 158 Series Our 158 series frames are nicknamed Mini Monster. They are a little tougher than the 11S because they are made from steel pipe instead of steel tubing. This would be the option if you are looking for a little more weight & strength in public areas. The frames are constructed with 1 5/8 OD schedule 40 steel pipe with 2 x 2 x 3/16 steel angle iron for the top and seat supports. 238 Series Our 238 series frames are nicknamed Monster. This would be your choice if you are looking for more strength and weight. The frames are constructed with 2 3/8 OD schedule 40 steel pipe with 3 x 3 x 3/16 steel angle iron for top and seat supports which gives it a don t mess with me attitude.
Gerber s Classic Picnic Tables All of our classic tables are available in 4, 5, 6 or 8 lengths. You have an option of treated or untreated lumber, cedar colored plastic/composit or alumninum tops and seats. 14 Series Frame 11 Series Frame Table Frame Series 158 Series Frame 238 Series Frame Description Steel Type Metal Gauge Outside Diameter Frame Weight 14 Series Standard Table Tube 14 gauge 1 1/2 42 lbs 11 Series Heavy Duty Tube 11 gauge 1 1/2 60 lbs 158 Series Mini Monster Pipe Schedule 40 1 5/8 71 lbs 238 Series Monster Table Pipe Schedule 40 2 3/8 105 lbs
Gerber s Specialty Picnic Tables Accessible Table Our accessible tables follow the same frame series as our classic tables. You can purchase a 16, 11, 158 or 238 series frames. Our accessible table is 3 higher than our classic table. They are available with both single or double overhang. Either way the seats are 6 long and the tops are either 8 for a single or 10 for a double overhang. The Gerber accessible table adds a center channel and an additional cleat that is welded on to each end frame to support the overhanging top. We do this to reduce the possibility of the top boards warping over time. Tot Table The Tot table is made of the same materials as the 14 Series and is designed for your childrens comfort. The top of the table is reduced to 25 and the seats to 14 for kid comfort. Shelter Table All of our classic picnic tables are available in longer lengths for use in a shelter building or wherever an extra long table is desired. By adding extra frames, braces and center channels the table can be built to whatever length meets your particular situation. Square Table The Gerber square table offers all of the qualities of our classic picnic tables with the addition of all side seating. This table is available in the 16 and 11 series. The top dimension is 48 square. The overall dimension is 75 square.
Gerber s Park Benches When you purchase Gerber s bench frame you receive two one-piece welded end frames, all neccessary braces, fasteners and directions for easy assembly. We only use prime grade steel that is made in the USA. Gerber offers 14 and 238 series benches. You can purchase either series in a portable or a stationary model. You also have an option of 2x10 or 2x4 for the back and seat. You have a choice of finishes: 1. Hot dipped galvanized - Our galvanizer uses the ASTM A123 specifications for all of our products. 2. Painted brown, green or black with a rust resistant enamel paint. Our products receive an acid bath prior to painting for better adhesion. 14 Series Our 14 series benches are constructed of 1 1/2 x 1 1/2 OD x 14 gauge steel square tubing. 238 Series Our 238 series benches are nicknamed Monster. They are much tougher than the 14 series because they are made from 2 3/8 schedule 40 steel pipe which gives them a don t mess with me attitude. This would be the option if you are looking for more strength and weight. 238 Stationary Bench 238 Portable Bench 14 Stationary Bench
Gerber s seats, table tops & bench backs Gerber offers untreated or treated lumber, recycled plastic or aluminum for your seats, table tops & bench backs. We include the fastening hardware with your purchase. You can select between lag screws, carriage bolts, elevator bolts or stainless steel carriage bolts. Both the elevator bolts and stainless steal hardware have an additional charge. Untreated lumber Our 2x10 s and 2x4 s kiln dried #1 southern yellow pine. We route the ends of the boards. Treated lumber Our 2x10 s and 2x4 s are kiln dried #1 southern yellow pine before treatment. We route the ends of the boards. Our lumber is treated with MicroPro wood Preservative Technology which is rated for above ground use. This is a green approved product. Recycled plastic boards Our recycled plastic products are manufactured from high quality recycled HDPE to create a long lasting product. Ultraviolet stabilizers provide resistance to color fading in our recylced plastic boards. We support all of our recycled plastic over 4 with steel tubes to prevent sagging over time. You can order the recylced plastic with 4, 6 or 8 length boards. Aluminum We use 2 x 10 anodized aluminum planks. The tops are connected together with end caps on both sides. We also include end caps on all of our aluminum seats for both look and safety. We ship carriage bolts for fasteners when you purchase our aluminum tops and seats. Composit / Plastic Untreated Wood Treated Wood Aluminum
Gerber s Park Grills We proudly offer a grill that is one of the strongest and most fuctional in the industry. The Gerber grill adjusts to four heights and tips back to add fuel and for easier cleaning. The grate cannot be removed. The fire-box is attached to a steel support post and swivels 360 degrees. The handles swing down to prevent them from getting hot. If you want a grill your patrons will enjoy using and one that is durable under all conditions, this is the grill you ve been looking for. We have two models: stationary and surface mount. The stationary model uses a steel post that gets cemented into the ground. The surface mount is furnished with a steel post that has a plate welded on it so it can be bolted to a solid surface. The firebox is one piece welded 3/16 thick steel plate. The grate bars are 1/2 solid steel. The overall cooking surface of the grill is 15 deep x 20. After listening to many campground owners we added a new option to our popular grill. We know cleaning the grill can be a pain but, we believe, it does add years of life to the grill if it is cleaned on a regular basis. We added a dump feature to help your campground save time each week cleaning grills. Between speeding up the cleaning process and extending the life of the grill we think this is a smart investment.
Gerber s Fire Rings Our fire rings are very heavy duty, manufactured from 3/16 steel plate with a 1 formed flange on the top for extra strength. The size is 8 high and 30 diameter. Model 30FRG includes a 13 X 24 cooking surface which tilts back for cleaning and re-fueling. Gerber s Bicycle Racks Solve your bicycle parking problems with our heavy duty galvanized steel bike racks. Choose 56 or 119 lengths, with single or double side parking. End frames and wheel stops are of galvanized steel tube. The wheel rack is welded steel tubing and hot dipped galvanized after fabrication. The depth of the double side rack is 40 and the single side rack is 33. Anchor holes provided. The bike capacity goes from 4 to 18 bikes depending on the model you choose.
Gerber s Expanded Metal Table A new picnic table at Gerber. We have combined the durability of 3/4 #9 expanded metal with a polyethylene coating to create another high quality metal table. We have kept with the classic rectangular shape and, like all of our tables, it is built to last in a commercial environment. Our design is virtually maintenance free and great for public picnic areas, campgrounds, national parks, restaurant patios and many other applications. Our table comes in multiple colors (see below) and you can mix and match the colors between the seats, top and frame. This table is available in 4, 6 & 8 and as an accessible table with a length of 8 or 10. This table will resist abrasions, corrosion, reasonable impacts & varying temperatures. It is very durable, built to last and has UV protection in the coating. Our expanded metal table will not warp, crack or peel with normal use.
Gerber keeps the lid on it The Archtop Animal tamper-resistant (Opens just wide enough for a standard fast food soft drink cup) Lid is recessed to minimize rain infiltration Weather and UV resistant polyethylene construction Fully customizable colors available Fits standard drum sizes The V-Lid Animal tamper-resistant (Opens just wide enough for a standard fast food soft drink cup) Weather and UV resistant polyethylene construction Fully customizable colors available Fits standard drum sizes Gerber Umbrellas The aluminum umbrella is aerodynamically designed and will withstand much stronger winds than the standard umbrellas. The vinyl & mesh umbrella have an optional crank and tilt controls. All umbrellas are available in most popular colors.
Gerber Tables Division of Nexgen LLC 2917 Latham Drive Madison, WI 53713 Toll Free 1.800.393.9923 Source Code: 2014C Come visit us at: www.gerbertables.com sales@gerbertables.com Customer Service before during and AFTER the sale Solid product designs Superior materials Sourced in the USA Gerber Products Hand crafted Built to last Made in the USA SIGN UP for Gerber Tables emails to stay up-to-date on all of our products. Go to www. gerbertables.com to register. GET CONNECTED. GET INSPIRED Like us. Follow us.