OWNER S MANUAL Addison 3 Person Cushion Swing Product code: 0-03843271-2 UPC code: 769455 761293 Vendor Item: SC-160-2NGS Date of purchase: / / 1
PARTS Read through all the instructions before beginning assembly. Unpack and identify all the parts. Place them on a flat, non-abrasive surface. Assembly by two people is recommended. Aa(1) Top Frame ar Ab (1) Top Frame ar (4) Leg C (2) Arm D (2) Ea (1) Leg Crossbar Canopy Side bar with Teeth Mechanism Eb (1) Canopy Side bar F (1) Strap Seat and ack G (2) H (1) Edge ar Canopy Fabric I (1) Seat and ack Cushion ACCESSORIES Ja (1) M6 x 45L olt Je (4) M8 x 95L olt Jb (4) M6 x 55L olt Jf (13 + 1 spare) M6 Nut Jc (8 + 1 spare) M6 x 77L olt Jg (4) M8 Nut Jd (2) M8 x 90L olt Jh (1) M8 Nut 2
Palermo 3 Seater Swing Product code: 7-8001246849-2 (SC-160-2GS) UPC code: 76945575546-9 Date of purchase: / / 1 ACCESSORIES (22 + 2 spares) Small Metal Washer Jr (1) Open Hex Wrench (11 + 1 spare) Large Metal Washer Js (1) Hex Wrench Jk (1) Lock Washer Jt (1) Touch up Paint Jl (2) Teeth Washer Ju (1) Assembly Instructions Sheet OWNER S MANUAL Jm (4) Small Plastic Sleeve Jn (8) Large Plastic Sleeve Jo (2) Knob Jp (2) Hook Jq (1) Allen Wrench 3
ASSEMLY INSTRUCTIONS Jg 1 Attach the top frame bar (Aa) to the top frame bar (Ab). Align the hole, insert an M6x45L bolt (Ja) through a small metal washer (), the top frame bars, another washer () and secure with an M6 nut (Jf). See Fig.1. Do not completely tighten. Je Jg Fig. 2 Je 2 Attach the legs () to the top frame bar (Aa&Ab). Align four holes. For each hole insert an M8x95L bolt (Je) through a large metal washer (), leg (), top frame bar, the other leg (), through another large metal washer() and secure with an M8 nut (Jg). See Fig. 2. Do not completely tighten. Repeat procedure for the other side. Ab Aa Jf D Fig. 1 3 Attach the leg crossbars (D) to the legs (). Align all holes, from the outside insert an M6x55L bolt (Jb), through the leg crossbar (D), a small plastic sleeve (Jm), the leg (), a small metal washer() and secure with an M6 nut (Jf) for each hole. See Fig. 3. Do not completely tighten. Repeat procedure for the other side. Securely tighten all bolts and nuts. (Note: the inside sticker is facing inside) Jb Jm Jf Fig. 3 D 4 Attach the arms (C) to the strap seat (F). Align the holes, from the outside insert an M6x77L bolt (Jc) through a small metal washer (), the arm (C ), a large plastic sleeve (Jn), the seat, another metal washer () and secure with an M6 nut (Jf) for each hole. See Fig. 4. Do not completely tighten. Repeat procedure for 2 holes of the other side. Fig. 5 Jn Jc Jf C Jp 5 Repeat step 4 for the strap back (F). See Fig. 5. Securely tighten all bolts and nuts. Fig. 4 Jc Jn Jf 4
6 Insert the hooks (Jp) into the top bars of arms (C) and hang the assembled body onto the top frame bars. Attach the canopy side bar (Eb) to the top frame bar (Aa). From inside insert an M8x90L bolt (Jd) through the top frame bar (Aa), a large metal washer (), a lock washer (Jk) and securely tighten with an M8 nut (Jh), then through a teeth washer (Jl), canopy side bar (Eb), another teeth washer (Jl), another large metal washer () and secure with a knob (Jo). See Fig. 6. Do not completely tighten. Jp C Jd Fig. 6 Aa Jk Jh Eb Jl Jl Jo Eb G Fig. 7 7 Insert the canopy edge bars (G) into the canopy side bar (Eb). See Fig. 7. G Jo Ea Ab Jd 8 Insert the canopy edge bars (G) into the canopy side bar with teeth mechanism(ea). (Make sure two gears fit securely.) From inside insert an M8x90L bolt (Jd) through the top frame bar (Ab), canopy side bar (Ea), a large metal washer () and secure with a knob (Jo). See Fig. 8. Fig. 8 5
H Fig. 9 9 Attach the canopy (H) to assembled swing frame. Unfold the canopy and place onto the swing frame. Fasten the Velcro straps to swing frame. See Fig. 9. H 10 Tighten all bolts using the Allen wrench and hex wrenches (Jq, Jr, Js). Put the cushion onto the swing frame and fasten all Velcro straps. See Fig. 10. Fig. 10 I Note: Swing canopy position adjustment: loosen the canopy position adjustment knob at one side of the swing canopy (The side with the teeth washers), tilt the canopy up or down until it reaches the desired position, tighten the knobs. Your swing is now ready for use. CARE INSTRUCTIONS Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents. Cover furniture with outdoor furniture covers when not in use. Please refer to part numbers when reordering For questions or comments about product: Call toll-free: 800-457-4652 Made in / Hecho en CHINA for Kmart Corporation, Hoffman Estates, IL 60179 SHOP kmart.com See our extensive assortment of outdoor living products on-line at www.sears.com and www.kmart.com 6