Siemens PICV 2-Way Automatic Balance Hose Kits - Submittal Hose Kit Size Normally Closed Flow Range 1/2 L.3-2.7 1/2 L.2 -.9 1/2 H 1.0-7.5 1/2 H.5-2.5 3/4 L.5-4.5 3/4 L 1.0-5.8 3/4 H 1.0-8.9 1 1.0-8.9 1-1/4 2.5-13.2 *1-1/2 10.0-31.0 *2 11.0-37.0 **1-1/2 and 2 hose kits use Chamberlin Stainless Steel Braided All Metal hose. Normally Closed Flow Range Qty. Trunk Connection Type (provided) FNPT (Std.) MNPT FSWT Hose Length 12 18 24 36 Custom Length Supply Line Options Ball Valve w/ PT UBY Strainer w/ PT and BDV Hose Kit CRPV Hose Kit CRPVY Return COIL Supply ATC Selection: Non Fail Safe Fail Safe Size 3 pt. flt. 0-10Vdc 3 pt. flt. 0-10Vdc 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" All Actuators are 24v WARNING: Not Required CRC Supplied Comments: Company: Rep: Approved By: Project: Quote #: PO #: Date: NOTE: * Drawings not to scale - Representation Only. * Fit within installation areas not guaranteed. * Hose kits assembled hand tight. Unit Connection Options Reducers FSWT Hose Adapter (1/2"- 1-1/4" hoses) Optional Union Accessories FNPTxMNPT Union w/ PT / MAV FNPTxFNPT Union w/ PT / MAV FNPTxFSWT Union w/ PT / MAV To insure proper installation, this hose assembly must be installed according to instructions included with shipment. Instructions are also available online at.
Siemens PICV Automatic Balance Hose Kits Siemens PICV Balance Type: PICV with adjustable max. flow setting & optional 3 Pt. floating or 0-10Vdc Actuator Body Design: Brass valve + PICV w/pt s, GPM dial. Brass - ANSI 250 rating Spring: Stainless Steel Close Off: 1/2 & 3/4 Normally Open - P 200 psi/ansi Class IV, 1/2 to 1-1/4 Normally Closed - P 45 psi/ansi Class IV, 1-1/2 & Normally Closed - P 50 psi/ansi Class III Flow Characteristic: 2-way, Linear Min. psid: varies with gpm setting Max. psid: 58 Actuators: Spring Return (Fail Safe): 24 volt 3 point floating or 24 volt 0-10Vdc Non-Spring Return (Fail-in-Place): 24 volt 3 point floating or 24 volt 0-10Vdc Supply Valve Options: Balance Type: Body Design: Ball: Stem O-Rings: Stem Packing: Seat: Handle: Working Pressure: Ball Valve Manual Balance Valve Manual Full Port Ball Valve w/pt Brass Chrome Plated Brass Brass BUNA-N PTFE PTFE Zinc Plated Steel w/ Plastic Coating 600 psig Hose Kit CRPV Model UBY Combination Ball Valve & Strainer w/ PT and BDV Brass C37000 Ball: Full Port Chrome Plated Ball Seal: Teflon Stem: Explosion Proof O-Rings: EPDM Strainer: 20 Mesh Stainless Steel Maximum Working Pressure: 400 psig Maximum Operating Temp: -4 o F to 250 o F Hose Kit CRPVY For detailed technical data for any Hose Kit component, refer to the ChamFlex catalog.
Siemens PICV Automatic Balance Hose Kits Flow Rates/Minimum PSID 1/2" L -04300 Norm. Closed.3-2.7 2.3 58-04310 Norm. Open.2 -.9 2.5 58 1/2 H -04301 Norm. Closed 1.0-7.5 2.6 58-04311 Norm. Open.5-2.5 3 58 3/4 L -04302 Norm. Closed.5-4.5 2.3 58-04312 Norm. Open 1.0-5.8 3,5 58 3/4 H -04303 Norm. Closed 1.0-8.9 3.2 58 1-04304 Norm. Closed 1.0-8.9 3.2 58 1-1/4-04305 Norm. Closed 2.5-13.2 2.6 58 1-1/2-04306 Norm. Closed 10.0-31.0 3.8 58 2-04307 Norm. Closed 11.0-37.0 4.6 58 * Cartridge Accuracy:
ChamFlex Hose Assemblies - Fixed End x Swivel End Overall Length (without adapter) ChamFlex Standard hose: Fixed End x Swivel End w/ MJIC x MNPT Adapter Hose Assembly: Recognized by Underwriters Laboratories (UL) under UL 207. Tested to ASTM E84/UL 723 and received a Class A Fire Rating. This is the highest fire rating that can be obtained under this testing methodology. Hose Sizes: 1/2 to 1-1/4 12, 18, 24, 36 and 48 1/2 & 3/4 - Minimum length: 6 with 1 increments. 1 & 1-1/4 - Minimum length: 9 with 1 increments. EPTF - White Santoprene with UL 94 V-0 Fire Rating 302/304 Stainless Steel Hose Fittings: Plated Steel Hose/Adapter Connection: Male JIC Metal to Metal Seal (no O-ring or gaskets) Fixed End Fitting: MNPT Swivel End Adapter Options: MNPT, FNPT(plated steel), FSWT(brass) Suitable Media: Water and Glycol. Not rated for potable water. 1/2 Hose 3/4 Hose 1 Hose 1-1/4 Hose Working Pressure 400 PSI 400 PSI 500 PSI 400 PSI Burst Pressure 1600 PSI 1600 PSI 2000 PSI 1600 PSI Minimum Bend Radius 2.5 4 5.5 7 Temperature Ratings -40 o F to 212 o F -40 o F to 212 o F -40 o F to 212 o F -40 o F to 212 o F
Chamberlin Stainless Steel Braided All Metal Hose Assemblies Overall Length Hose Sizes: 1-1/2 to 2 12, 18, 24, 36 Minimum length: 12 with 1 increments. 321L/316L Stainless Steel 304L Stainless Steel Fittings: Iron/Carbon Steel Fixed End Fittings: MNPT Union End Fittings: MNPT Working Pressure: 300 psi Burst Pressure: 1200 psi Minimum Bend Radius: 1-1/2-11.75 2-12.55 Temperature Rating: -20 o F to 800 o F Hose Sizes: 2-1/2 18, 24, 36 Minimum length: 18 with 1 increments. T321L Stainless Steel Series 300 Stainless Steel Fittings: Iron/Carbon Steel Fixed End Fittings: MNPT Union End Fittings: MNPT Working Pressure: 300 psi Burst Pressure: 1200 psi Minimum Bend Radius: 16 Temperature Rating: -20 o F to 800 o F