MOBILE TOOL CARTS 23 MOBILE TOOL CARTS MCRF SERIES MCRF-48 Series with DuraBoard A versatile all aluminum portable tool cart that provides tool storage, parts organization, special situation use for tradesman, maintenance persons, carpenters, heating & cooling installer, painters, metal shapers, fabricators, welders, auto or motorcycle builders, A & P mechanics and hobbyists. Dagger Tools mobile cart provides a full 4 X 8 hook board storage surface that allow full access to both cart sides and a internal storage pan that provides additional storage for tool boxes, special service equipment, raw materials a small air compressor the options are endless. You can use our bin storage clips designed for any hook board along with any Akro style plastic bin and when you re disassembling, you can conveniently deposit all nut, bolts and hardware and safely store away till you need them again. If you re in assembly you can now store both the correct installation tool right along side the parts need to complete the job. Our aluminum chassis allow you to easily transport our tool cart from the shop floor or garage to the job site. With our selection of different grades of hook boards and paired with double point locking Durahooks you can achieve up to 65 lbs of holding capacity per hook. Of course if you want to use the traditional, but antique pegboard hooks our hook boards will accept them just fine. Equipped with full complement ball bearing casters for smooth operation and enhanced maneuvering of its 28" wide chassis. Even through limited access spaces and tight corners fully loaded is a real asset. Some assembly is required but Dagger Tool carts only require one size truss head screw and utilize permanently installed thread inserts so assembly time is truly accomplished in minutes. And you can as quickly disassemble for transportation in a small vehicle if necessary. If you damage one of the hook boards or want to substitute one style for another you can order replacement boards and within minutes repair or update your cart. A six-inch pull handle is also provided to steer and pull cart freely within any shop, plant or garage. Optional screw on tool shelves is available in several sizes for those odd size or shaped tools, liquid containers or items that just won t hang well.
MOBILE TOOL CARTS 24 MCRF-48A with Hardboard MCRF-Anodizing Option Red Understanding our hook board types HardBoard: Tempered composite wood by-product, 1/4" thick, 1/4 peg holes. Color: brown. Much stronger than traditional laminated paper pegboard sold by most lumber and building centers. Improved resistance to moisture and staining. DuraBoard: polypropylene plastic, wood by-product, 1/4" thick, 1/4 peg holes. Color: white. Superior-holding power over traditional hook board. Extremely durable, weather, moisture, grease, oil resistant will not stain. Most paint mist will not permanently adhere to. Featured Models: Model No. Description MCRF-48 Natural aluminum color chassis, Duraboard hook board covering. MCRF-48A Natural aluminum color chassis, Hardboard hook board covering. Option: MCRF- Anodizing DuraHook Starter Kit includes: 2 - Plastic Hanging Bins 2 - Bin Clips Anodized aluminum chassis (available colors: red, blue & black). Specify for MCRF-48 or MCRF-48A 2-2-3/4"L Double U Shape 1-5-3/4" Double Rod 1-5" Double Rod Closed End Loop 1-6" Single Rod 3-6" Single Rods 2 - Pliers/Wrench Holders Specifications: Storage Area: 32 Sq. ft (48" x 48" work surfaces-2 sides, includes 4 DuraBoards or Hardboards), internal pan/shelf: 9.3 Sq.ft Storage hooks: Accommodates complete line of DuraHooks (see Dagger Tool catalog pages for available styles & sizes) or traditional peg board hooks. Load rating: 650lbs. (150 lbs for internal pan/ shelf) Assembled size: Total Ship Weight: 49"h x 48"l x 29-7/8"w 75 lbs (DuraBoard models), 70lbs (Hardboard models) 2 cartons Can be shipped via all ground service carriers, UPS, DHL and FedEx. Casters: 4" diameter Polyurethane wheels, full complement ball bearings (2 Included: swivel with locks, 2 rigid) Assembly instructions, # 76901-26pcs DuraHook starter assortment kit. Options: # MCRF- Shelf, mild steel construction & epoxy paint, 6" wide X 7" high X 2"shelf depth X 22" long. FREE KIT with MOBILE TOOL CART PURCHASE 1 - Multi Prong Tool/Wrench Holder 2-2-1/2" Single Rods 2-2-13/16" Double Rods 2 - Curved Hooks 1 - Spring Clip/Can Holder 1 - Double Ring Tool Holder 1 - Standard Spring Clip 2 - Extended Spring Clips 30 of each - LocScrews Small Screw for 1/8" pegboard Large Screw for 1/4" pegboard
MOBILE TOOL CART 25 MOBILE TOOL CART MCLBC SERIES A multipurpose portable cart that allows you to organize, separate and store tools and small parts without clutter on both sides. Similar to our MCRF series cart is truly a Heavy Duty professional service cart convenient and offers users total confidence for all their storage needs. Durable casters allow cart to roll smoothly when fully loaded over most surfaces. Unlike toolboxes and chests, you will always be able to visually locate tools in a snap and never again be limited by a tool size to insure proper storage and secure storage. With a narrow 22" wide base, MCLBC series carts permit you to move stored tools and other items around tight corners and through narrow spaces. Add the optional bottom tray for additional storage of containerized liquids, personal toolboxes or replacement parts for equipment. Each cart is equipped with LocBoard perforated steel hook boards that utilize two or four point contact locking mechanisms and LocScrews. With individual hook strength rated at 95 lbs. per hook. As on our MCRF series carts you can use our unique binclip to integrate plastic Akro style bins on the storage surfaces. Featured Models: Model No. Description MCLBC-48 Gray steel color chassis, LocBoard hook board covering. Specifications: Storage Area: 28.3 Sg. Ft. (includes 4 LocBoards) Storage hooks: Accommodates complete line of LocHooks only! (See Dagger Tool catalog pages for complete selection of styles and sizes) Load rating: 850 lbs. Assembled size: 55"h x 50"l x 22"w (Handle extension adds 3" to length) Total Ship Weight: 135 lbs (Two box kit) must ship motor freight Epoxy coating: Frame (gray), LocBoards (white) Casters: 5" diameter Polyurethane wheels (2 swivel with locks, 2 rigid) A-Frame Construction: 11 gauge steel with welded cross support Options: # TBC-T Bottom tray 47"l x 19"w with 7/8"h lip. 14 gauge Steel with welded corners, Epoxy coated, medium gray.
DuraHook 26 SWING PANEL SYSTEMS Each heavy-duty system is double-sided, designed to fit large amounts of storage into a fraction of the normal wall space. Triton turnkey systems offer flexibilty in layout, placement with unlimited growth capabilities. Each unit comes with 1/4" tempered pegboard and hardware for attachment to the durable powder coated steel frames. Every model is load-rated and comes with all hardware necessary for secure mounting to solid concrete or block walls. (Hollow walls with studs requires the installation of 2"x6" headers.) B-1 and D-1 are designed for mounting over workbenches or other work surfaces. All swing panels accommodate both 70000 series DuraHooks and standard pegboard hooks (hooks and tools not included). Assembly required. Model No. Total Surface Area Swing Radius Finished Size B-1 16 Sq.Ft. 33" 24"w x 48"h D-1 32 Sq.Ft. 56" 48"w x 48"h W-1 64 Sq.Ft. 56" 48"w x 72"h DURABOARD Two sheets of polypropylene pegboard, 1/4" thickness per package. Greater holding power over traditional pegboard. Durable, weather reistant, washable and suitable for corrosive environments. Will not crack or break under normal use. Accommodates 70000 series DuraHook line. Mount using SK-70015 spacer kit or other framing system. Model No. Description Hole Size Hole Spacing Size DB-2 Transluscent White 9/32" 1" O.C. 24"x48" (2 Sheets incl.) PEGBOARD, PLYWOOD & DURABOND SPACER SYSTEM All installation hardware included. Model No. Creates Space Spacer Dia. Qty/Pack 70015* 3/8" 1-3/16" 15 sets
DURA HOOKS THE STAY PUT HOOK DuraHook 27 Locking style pegboard hooks. The only hook designed to lock intoplace on 1/8", 1/4" pegboard or DuraBoards, without giving up strength. Hooks fasten securely so stored items stay put. Hooks mount in four different positions making them capable of accommodating virtually any tool or accessory, vertically or horizontally. Fixtures install and lock into place from the front so there is no need to remove board. Incorporate hanging plastic bins into your system for loose parts using our patented 77500 BinClips. Degree/ Height/ Rod Model No. Description Length A Bend B Bend C Thickness D Inside Dia. E Qty/Pack 71119 Single Rod 1-1/8" 90 1/2" 3/16" 10 71123 Single Rod 1" 30 1" Long 3/16" 10 71313 Single Rod 2-1/2" 30 1/2" 3/16" 10 71319 Single Rod 2-3/4" 90 1/2" 3/16" 10 71413 Single Rod 4" 30 1/2" 3/16" 10 71613 Single Rod 6" 30 1/2" 1/4" 10 71619 Single Rod 6" 90 1/2" 1/4" 10 71813 Single Rod 8" 30 1/2" 1/4" 5 72100 Plier Holder 3/4" 3/16" 2" 10 72318 Dbl. Rod I.D. 1-5/8" 2-13/16" 80 3/4" 3/16" 1-5/8" 10 72618 Dbl. Rod I.D. 1-5/8" 5-3/4" 80 3/4" 1/4" 1-5/8" 10 72818 Dbl. Rod I.D. 1-5/8" 8-1/4" 80 3/4" 1/4" 1-5/8" 5 Model No. Description Hold Range Qty/Pack 73105 Spring Clips-Extended 7/32"-5/16" 10 73107 Spring Clips-Extended 3/16"-1-5/32" 10 73205 Spring Clips-Extended 1/4"-1/2" 10 73210 Spring Clips-Standard 7/16-7/8" 10 Rod Model No. Description Length A Thickness D Inside Dia. E Qty/Pack 74120 Sgl. Ring Tool Holder 1-5/16" 3/16" 3/4" 10 74212 Dbl. Ring Tool Holder 1-13/16" 1/4" 3/4" 10 Rod Model No. Description Length A Thickness D Inside Dia. E Qty/Pack 75200 Curved Hook 2-1/4" 3/16" 1" 10 75230 Curved Hook 3-3/4" 1/4" 3-3/32" 10 76325 Dbl. Mount U Shape 2-7/8" 3/16" 1-3/4" 5 Model No. Description Hold Range Qty/Pack 76342 Spring Clip/Spray Can Holder (extended) 1-7/8"-2-3/4" 5 Degree/ Height/ Model No. Description Length A Bend B Bend C Inside Dia. E Qty/Pack 76528 Dbl. Closed End Loop 5" 80 2" 2-3/4" 5 76828 Dbl. Closed End Loop 8" 80 2" 2-3/4" 5 76660 Multi-Prong Tool/ Wrench Holder 1-13/32" 8-1/8" 7/16" & 13/16" 5 77500 DuraBin Clip 5 Pack Fits both 1/8" for Akro Bins 13/32" or 1/4" 5 Pegboard & DuraBoards Single Rod Series Double Rod Series Curved Hook Series Single Ring Tool Series Dimensions for Both DuraHook and LocHooks
LocHook 28 LOCBOARD HEAVY DUTY TOOL STORAGE SOLUTION Offers heavy-duty storage solutions that will always insure the ultimate in holding strength. LocBoards are formed using a patented boxed steel construction with internal ribbed supports members. Durable epoxy powder coating protects and extends product life. LocBoards mount vertically or horizontally and can be added to accommodate growth. Model Load No. Description Depth Size Gauge Rating LB1-W White Epoxy 9/16" 24"x24" 18 Ga. 300 lbs. Powder Coat LB2-W White Epoxy 9/16" 24"x42.5" 18 Ga. 400 lbs. Powder Coat
LocHook 29 LOCBOARD PROFESSIONAL ORGANIZATION KIT Includes two LB-2W 24"x42.5" White Heavy-Duty Boxed Construction Metal Boards, 32 piece assortment of LocHooks with locking screws and 2 Akro-Mils 30210 Bins. Tools not included. Model Storage Load No. Description Space Rating LB2-W Kit 18 Ga. White Epoxy 14.1 Sq.Ft. 400 lbs./panel Powder Coat
LOC HOOKS INDUSTRIAL STRENGTH HOOKS LocHook 30 The ultimate building block for organization and storage using the LocBoard system. These industrial strength hooks with patented 2 and 4-point contact locking mechanisms offer the ultimate in holding power. Hooks mount in four directions offering storage solutions for nearly any item, while maximizing the use of storage space. LocHooks can be positioned or combined with one another to increase holding power and offers a storage solution for those odd shaped tools. Incorporate hanging plastic bins into your system using our patented 57500 BinClips. See technical specifications for LocHook products on next page. Degree/ Height/ Model No. Description Length A Bend B Bend C Inside Dia. E Qty/Pack 51013 Single Rod 1/2" 60 3/10" N/A 5 51010 Single Rod 1-1/5" 0 0 N/A 5 51113 Single Rod 1" 40 1/2" N/A 5 51119 Single Rod 1" 90 5/8" N/A 5 51219 Single Rod 2" 90 5/8" N/A 5 51310 Single Rod 3" 0 0 N/A 5 51323 Single Rod 3" 30 1/2" N/A 5 51413 Single Rod 4" 30 1/2" N/A 5 51629 Single Rod 6" 90 7/10" N/A 5 51813 Single Rod 8" 30 1/2" N/A 5 52113 Double Rod 1" 30 1/2" 1-11/32" 5 52119 Double Rod 1" 90 3/4" 1-11/32" 5 52213 Double Rod 2" 30 1/2" 1-11/32" 5 52313 Double Rod 3" 30 1/2" 1-11/32" 5 52319 Double Rod 3" 90 3/4" 1-11/32" 5 52419 Double Rod 4" 90 3/4" 1-11/32" 5 52628 Double Rod 5-3/4" 80 3/4" 1-5/8" 5 Model No. Description Hold Range Qty/Pack 53105 Spring Clip Extended 1/4" 1/2" 5 53107 Spring Clip Extended 3/4" 1-1/4" 5 53120 Spring Clip Extended 1" 2" 5 53130 Spring Clip/Spray Can Holder Extended 1-1/2" 2-3/4" 5 53205 Spring Clip Standard 1/2" 3/4" 5 53210 Spring Clip Standard 3/4" 1-1/4" 5 Model No. Description Length A Inside Dia. E Qty/Pack 54105 Single Rod Tool Holder 1-1/8" 1/2" 5 54110 Single Rod Tool Holder 1-5/8" 1" 5 54117 Single Rod Tool Holder 2-1/2" 1-3/4" 5 55200 Curved Hook 2-1/4" 2-1/4" 5 55230 Curved Hook 3-7/8" 3-3/32" 5 56201 Closed Hammer/ Plier Holder 1-2/5" 1-4/5" 5 Model No. Description I.D. Deep I.D. Wide Hold Inside Dia. E Qty/Pack 56186 LocBoard Shelf 6-1/2" 18" 45 lbs. 1 56660 Multi-Prong Tool Holder 1-13/32" 5/32" 7/16" & 3/16" 1 57500 Bin Clip 5 Accommodates all types of bins designed for hanging systems. Compatible with ALL steel LocBoards. Model No. Description Length A Degree/Bend B Height/Bend C Inside Dia. E Qty/Pack 56528 Double Closed End Loop 5" 80 2" 2-3/4" 5 56828 Double Closed End Loop 8" 80 2" 2-3/4" 5