the figures of Schiavetti We perforate more than 15.000 tons of raw material We produce more than 1.500.000 m 2 of perforated sheets We have more than 1.200 customers We export to more than 40 countries companies of the group GS Schiavetti srl - Expanded metal Viale della Vittoria, 4-15060 SAZZANO (AL) Italia el. +39 0143 61 295 - Fax +39 0143 63 34 66 e-mail: rgs@rgs.it - www.rgs.it Schiavetti EKNO srl - Wire clothes and cable trays Viale della Vittoria, 4-15060 SAZZANO (AL) Italia el. +39 0143 63 33 87 - Fax +39 0143 63 36 03 e-mail: info@schiavettitekno.it - www.schiavettitekno.it SOVAEC industriale srl - Wire screens Viale della Vittoria, 4-15060 SAZZANO (AL) Italia el. +39 0143 63 35 44 - Fax +39 0143 63 35 65 e-mail: sovatec@sovatec.it - www.sovatec.it Profilati Leggeri Cogoleto S.r.l. - Profiles Via Lerma, 23-15060 Silvano D Orba (AL) - Italy el. +39.0143.882120 Fax +39.0143.882422 e-mail: info@profilatileggeri.com - www.profilatileggeri.com SchACatLamIng07-329b-DF.indd 1 25-11-2008 11:05:58
stock SCHIAVEI Lamiere forate is glad to present its range of stock items. We produce perforated plates in different sizes, materials and perforation patterns to suit our clients requirements. More than 40.000 perforated sheets are available from stock in the following sizes: 1000 x 2000 mm 1250 x 2500 mm 1500 x 3000 mm And in the following materials: cold and hot rolled carbon steel (mild steel), galvanized, stainless steel (AISI 304, 316L grade) and aluminium. standards he following table gives the designations for the raw material and for types of perforation: Standards regarding the raw material are as follow: Cold rolled and hot rolled carbon steel: EN 10130, En 10131, EN 10111, EN 10051, EN 10025, EN 10029 Hot- dip galvanized carbon steel, Sendzimir method: EN 10327, EN 10143 Stainless steel: EN 10088-1/2, EN 10051, EN 10029, EN ISO 9445 1.4301 (AISI 304 grade) 1.4404 (AISI 316L grade) Aluminium: EN 515, EN 573, EN 485 EN AW 1050 A (grade) Standards regarding types of perforation are as follow: ISO 10630-7805/1-2 Standard perforated plates available as stock comply to the following specifications: Margins on long sides: minimum Margins on short sides: no margins (commercial in case of sectional perforation) Flatness: according to commercial standard olerances on length: -0+10 15 mm. olerances on width: according to EN raw material standard. Specific unperforated margins and/or unperforated areas as well as specific flatness and /or sizes tolerances must be specified upon request. Schiavetti is also able to supply additional fabrication work, such as bending, cutting, anodizing, coating and others on request. For any further information on our products, please do not hesitate to contact our customer service at: +39 143 607911 SchACatLamIng07-329b-DF.indd 2 25-11-2008 11:05:58
ound holes 0,5 1 2,5 3 4 5 6 10 12 15 20 perforated sheets 1000x2000 mm Mild steel Galvanized (Sendzimir) thickness Stainless steel (AISI 304) Stainless steel (AISI 316L) Aluminium 0,5 0,8 1 1,5 2 3 4 5 6 8 10 0,5 0,75 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 1,25 15% 6 3,5 30% 13 4 23% 14 4,5 18% 14 3,5 46% 15 4 35% 15 4 51% 16 5 33% 16 5,5 27% 17 10 23% 21 9 40% 22 10 33% 22 12 23% 23 7 10 44% 23 8 1,5 10% 7 0,6 1,5 15% 7 0,8 1,5 26% 8 2 15% 8 2 23% 9 2,2 19% 9 1,25 2,3 27% 10 1,5 2 2,5 33% 10 3 23% 11 3,5 17% 11 1,75 3 31% 12 3 40% 12 3,2 35% 13 6 23% 17 3,5 5 44% 18 6 40% 18 7 30% 19 7,7 24% 19 7 7,5 40% 20 8 35% 21 11 48% 24 12 14 15 14 15 16 17 20 16 18 20 20 23 28 30 25 35 46% Open area 46% Page 20 40% 24 30% 25 26% 25 46% 26 40% 26 35% 27 31% 27 23% 28 51% 28 40% 29 33% 29 51% 30 39% 30 46% 31 40% 31 30 40 51% 32 32 SchACatLamIng07-329b-DF.indd 3 25-11-2008 11:06:00
perforated sheets 1000x2000 mm Square holes C 5 8 10 15 U 0,5 0,8 1 1,5 2 3 4 5 6 8 10 0,5 0,75 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 7 51% 33 8 39% 34 10 64% 34 12 44% 35 12 69% 35 14 51% 36 15 44% 36 20 Mild steel Galvanized (Sendzimir) thickness Stainless steel (AISI 304) Stainless steel (AISI 316L) Aluminium Open area 56% Page 37 Slot holes Mild steel Galvanized (Sendzimir) thickness Stainless steel (AISI 304) Stainless steel (AISI 316L) Alluminio Aluminium 0,5 0,8 1 1,5 2 3 4 5 6 8 10 0,5 0,75 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 Open area 4x20 38% 38 5x20 38% 39 Page Decorative holes Mild steel Galvanized (Sendzimir) 0,5 0,8 1 1,5 2 3 4 5 6 8 10 0,5 0,75 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 45 44% 40 8 37% 41 8 bis 43% 41 9 34% 42 F LL 18% 42 F LC 18% 43 also available gold anodized, bronze anodized and white coated thickness Stainless steel (AISI 304) Stainless steel (AISI 316L) Aluminium Open area Page Aderstop 8 Mild steel Galvanized (Sendzimir) thickness Stainless steel (AISI 304) Stainless steel (AISI 316L) Aluminium 0,5 0,8 1 1,5 2 3 4 5 6 8 10 0,5 0,75 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 Open area Page 5% 44 SchACatLamIng07-329b-DF.indd 4 25-11-2008 11:06:01
perforated sheets 1250x2500 mm ound holes 0,5 0,8 1 1,5 2 3 4 5 6 8 10 0,5 0,75 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 2 3,5 30% 13 3 4 5 6 8 10 Mild steel Galvanized (Sendzimir) thickness Stainless steel (AISI 304) Stainless steel (AISI 316L) Aluminium Open area 5 33% 16 6 40% 18 8 35% 21 9 40% 22 12 40% 24 15 40% 26 15 20 51% 30 20 28 46% 31 Page Square holes C U 0,5 0,8 1 1,5 2 3 4 5 6 8 10 0,5 0,75 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 5 7 51% 33 8 10 Mild steel Galvanized (Sendzimir) Stainless steel (AISI 304) thickness Stainless steel (AISI 316L) Aluminium Open area 12 44% 35 15 44% 36 Page Aderstop 8 Mild steel Galvanized (Sendzimir) Stainless steel (AISI 304) thickness Stainless steel (AISI 316L) Aluminium 0,5 0,8 1 1,5 2 3 4 5 6 8 10 0,5 0,75 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 Open area Page 5% 44 perforated sheets 1500x3000 mm ound holes 0,5 0,8 1 1,5 2 3 4 5 6 8 10 0,5 0,75 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 4 6 40% 18 5 10 Mild steel Galvanized (Sendzimir) Stainless steel (AISI 304) thickness Stainless steel (AISI 316L) Aluminium Open area 8 35% 21 15 40% 26 Page Square holes C U Mild steel Galvanized (Sendzimir) Stainless steel (AISI 304) thickness Stainless steel (AISI 316L) Aluminium 0,5 0,8 1 1,5 2 3 4 5 6 8 10 0,5 0,75 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 2 3 0,5 0,8 1 1,5 Open area 10 15 44% 36 Page SchACatLamIng07-329b-DF.indd 5 25-11-2008 11:06:03
ound holes staggered = diameter of the hole = distance between the centers of the holes 0,5 1,25 ound holes staggered - open area 15% diameter 0,5 mm - pitch 1,25 mm Mild steel 1000 x 2000 0,5 hickness (mm) 6 SchACatLamIng07-329b-DF.indd 6 25-11-2008 11:06:09
0,5 1,5 scale1:1 ound holes staggered - open area 10% diameter 0,5 mm - pitch 1,5 mm AISI 304 1000 x 2000 0,5 hickness (mm) 0,6 1,5 scale1:1 ound holes staggered - open area 15% diameter 0,6 mm - pitch 1,5 mm AISI 304 1000 x 2000 0,5 hickness (mm) 7 SchACatLamIng07-329b-DF.indd 7 25-11-2008 11:06:10
0,8 1,5 ound holes staggered - open area 26% diameter 0,8 mm - pitch 1,5 mm Mild steel 1000 x 2000 0,5 AISI 304 1000 x 2000 0,5 hickness (mm) 0,8 2 ound holes staggered - open area 15% diameter 0,8 mm - pitch 2 mm Mild steel 1000 x 2000 0,8 hickness (mm) 8 SchACatLamIng07-329b-DF.indd 8 25-11-2008 11:06:11
1 2 ound holes staggered - open area 23% diameter 1 mm - pitch 2 mm hickness (mm) Mild steel 1000 x 2000 0,5-0,8-1 AISI 304 1000 x 2000 0,5-0,8 1 2,2 ound holes staggered - open area 19% diameter 1 mm - pitch 2,2 mm AISI 304 1000 x 2000 1 hickness (mm) 9 SchACatLamIng07-329b-DF.indd 9 25-11-2008 11:06:12
1,25 2,3 ound holes staggered - open area 27% diameter 1,25 mm - pitch 2,3 mm Mild steel 1000 x 2000 hickness (mm) 1 1,5 2,5 ound holes staggered - open area 33% diameter 1,5 mm - pitch 2,5 mm hickness (mm) Mild steel 1000 x 2000 0,5-0,8-1 - 1,5 AISI 304 1000 x 2000 0,5-1 10 SchACatLamIng07-329b-DF.indd 10 25-11-2008 11:06:13
1,5 3 ound holes staggered - open area 23% diameter 1,5 mm - pitch 3 mm Mild steel 1000 x 2000 1,5 AISI 304 1000 x 2000 0,8-1 hickness (mm) 1,5 3,5 ound holes staggered - open area 17% diameter 1,5 mm - pitch 3,5 mm hickness (mm) AISI 304 1000 x 2000 1,5 11 SchACatLamIng07-329b-DF.indd 11 25-11-2008 11:06:14
1,75 3 ound holes staggered - open area 31% diameter 1,75 mm - pitch 3 mm Mild steel 1000 x 2000 1,5 hickness (mm) 2 3 ound holes staggered - open area 40% diameter 2 mm - pitch 3 mm Mild steel 1000 x 2000 1-2 hickness (mm) 12 SchACatLamIng07-329b-DF.indd 12 25-11-2008 11:06:15
2 3,2 ound holes staggered - open area 35% diameter 2 mm - pitch 3,2 mm AISI 304 1000 x 2000 0,5 hickness (mm) 2 3,5 ound holes staggered - open area 30% diameter 2 mm - pitch 3,5 mm Mild steel 1000 x 2000 1250 x 2500 hickness (mm) 0,5-0,8-1 - 1,5-2 1 Galvanized 1000 x 2000 1 AISI 304 1000 x 2000 0,8-1 - 1,5 Aluminium 1000 x 2000 1 13 SchACatLamIng07-329b-DF.indd 13 25-11-2008 11:06:16
2 4 ound holes staggered - open area 23% diameter 2 mm - pitch 4 mm Mild steel 1000 x 2000 1,5-2 hickness (mm) 2 4,5 ound holes staggered - open area 18% diameter 2 mm - pitch 4,5 mm AISI 304 1000 x 2000 2 hickness (mm) 14 SchACatLamIng07-329b-DF.indd 14 25-11-2008 11:06:17
2,5 3,5 ound holes staggered - open area 46% diameter 2,5 mm - pitch 3,5 mm Mild steel 1000 x 2000 2 hickness (mm) 2,5 4 ound holes staggered - open area 35% diameter 2,5 mm - pitch 4 mm Mild steel hickness (mm) 1000 x 2000 1-1,5-2 AISI 304 1000 x 2000 1-1,5 15 SchACatLamIng07-329b-DF.indd 15 25-11-2008 11:06:18
3 4 ound holes staggered - open area 51% diameter 3 mm - pitch 4 mm hickness (mm) Mild steel 1000 x 2000 0,8-1 - 2 3 5 ound holes staggered - open area 33% diameter 3 mm - pitch 5 mm hickness (mm) Mild steel 1000 x 2000 0,5-0,8-1 - 1,5-2 1250 x 2500 1-1,5-2 Galvanized AISI 304 1000 x 2000 0,75-1 - 1,5-2 1250 x 2500 0,75-1 - 1,5 1000 x 2000 0,5-0,8-1 - 1,5 1250 x 2500 1-1,5 AISI 316L 1000 x 2000 1-1,5 16 Aluminium 1000 x 2000 1-1,5 SchACatLamIng07-329b-DF.indd 16 25-11-2008 11:06:19
3 5,5 ound holes staggered - open area 27% diameter 3 mm - pitch 5,5 mm Mild steel 1000 x 2000 3 AISI 304 1000 x 2000 2 hickness (mm) 3 6 ound holes staggered - open area 23% diameter 3 mm - pitch 6 mm hickness (mm) AISI 304 1000 x 2000 3 17 SchACatLamIng07-329b-DF.indd 17 25-11-2008 11:06:20
3,5 5 ound holes staggered - open area 44% diameter 3,5 mm - pitch 5 mm Mild steel 1000 x 2000 2 hickness (mm) 4 6 ound holes staggered - open area 40% diameter 4 mm - pitch 6 mm hickness (mm) Mild steel 1000 x 2000 0,5-0,8-1 - 1,5-2 1250 x 2500 1-1,5-2 1500 x 3000 1-1,5 Galvanized AISI 304 1000 x 2000 0,75-1 - 1,5-2 1250 x 2500 1-1,5 1000 x 2000 0,5-0,8-1 - 1,5 Aluminium 1000 x 2000 1 18 SchACatLamIng07-329b-DF.indd 18 25-11-2008 11:06:21
4 7 ound holes staggered - open area 30% diameter 4 mm - pitch 7 mm Mild steel 1000 x 2000 3 AISI 304 1000 x 2000 2-3 hickness (mm) 4 7,7 ound holes staggered - open area 24% diameter 4 mm - pitch 7,7 mm Mild steel 1000 x 2000 4 hickness (mm) 19 SchACatLamIng07-329b-DF.indd 19 25-11-2008 11:06:23
5 7 ound holes staggered - open area 46% diameter 5 mm - pitch 7 mm Mild steel 1000 x 2000 1-1,5 hickness (mm) 5 7,5 ound holes staggered - open area 40% diameter 5 mm - pitch 7,5 mm Mild steel 1000 x 2000 0,5 hickness (mm) 20 SchACatLamIng07-329b-DF.indd 20 25-11-2008 11:06:24
5 8 ound holes staggered - open area 35% diameter 5 mm - pitch 8 mm hickness (mm) Mild steel 1000 x 2000 0,8-1 - 1,5-2 - 3-4 1250 x 2500 1-1,5-2 - 3 1500 x 3000 1-1,5-2 Galvanized AISI 304 1000 x 2000 0,75-1 - 1,5-2 1250 x 2500 0,75-1 - 1,5-2 1000 x 2000 0,8-1 - 1,5-2 - 3 1250 x 2500 1-1,5 AISI 316L 1000 x 2000 1-1,5 Aluminium 1000 x 2000 1-1,5 5 10 ound holes staggered - open area 23% diameter 5 mm - pitch 10 mm hickness (mm) Mild steel 1000 x 2000 5 21 SchACatLamIng07-329b-DF.indd 21 25-11-2008 11:06:25
6 9 ound holes staggered - open area 40% diameter 6 mm - pitch 9 mm hickness (mm) Mild steel 1000 x 2000 0,8-1 - 1,5-2 - 3 1250 x 2500 1-1,5-2 Galvanized 1000 x 2000 1-1,5-2 1250 x 2500 1-1,5-2 AISI 304 1000 x 2000 0,8-1 - 1,5-2 6 10 ound holes staggered - open area 33% diameter 6 mm - pitch 10 mm Mild steel 1000 x 2000 4 AISI 304 1000 x 2000 3 hickness (mm) 22 SchACatLamIng07-329b-DF.indd 22 25-11-2008 11:06:26
6 12 ound holes staggered - open area 23% diameter 6 mm - pitch 12 mm Mild steel 1000 x 2000 5-6 hickness (mm) 7 10 ound holes staggered - open area 44% diameter 7 mm - pitch 10 mm Mild steel 1000 x 2000 1 hickness (mm) 23 SchACatLamIng07-329b-DF.indd 23 25-11-2008 11:06:26
8 11 ound holes staggered - open area 48% diameter 8 mm - pitch 11 mm Mild steel 1000 x 2000 1-1,5 hickness (mm) 8 12 ound holes staggered - open area 40% diameter 8 mm - pitch 12 mm hickness (mm) Mild steel 1000 x 2000 0,8-1 - 1,5-2 - 3-4 1250 x 2500 1-1,5-2 Galvanized AISI 304 1000 x 2000 1-1,5-2 1250 x 2500 1,5 1000 x 2000 1-1,5-2 - 3 24 SchACatLamIng07-329b-DF.indd 24 25-11-2008 11:06:27
8 14 ound holes staggered - open area 30% diameter 8 mm - pitch 14 mm Mild steel 1000 x 2000 5-6 hickness (mm) 8 15 ound holes staggered - open area 26% diameter 8 mm - pitch 15 mm Mild steel 1000 x 2000 8 hickness (mm) 25 SchACatLamIng07-329b-DF.indd 25 25-11-2008 11:06:28
10 14 ound holes staggered - open area 46% diameter 10 mm - pitch 14 mm hickness (mm) Mild steel 1000 x 2000 1-1,5-2 10 15 ound holes staggered - open area 40% diameter 10 mm - pitch 15 mm hickness (mm) Mild steel 1000 x 2000 1-1,5-2 - 3-4 1250 x 2500 1-1,5-2 - 3 1500 x 3000 2 Galvanized AISI 304 1000 x 2000 1-1,5-2 1250 x 2500 1-1,5-2 1000 x 2000 1-1,5-2 - 3 1250 x 2500 1,5 26 AISI 316L 1000 x 2000 1-1,5 SchACatLamIng07-329b-DF.indd 26 25-11-2008 11:06:29
10 16 ound holes staggered - open area 35% diameter 10 mm - pitch 16 mm Mild steel 1000 x 2000 5-6 hickness (mm) 10 17 ound holes staggered - open area 31% diameter 10 mm - pitch 17 mm Mild steel 1000 x 2000 8 hickness (mm) 27 SchACatLamIng07-329b-DF.indd 27 25-11-2008 11:06:29
10 20 ound holes staggered - open area 23% diameter 10 mm - pitch 20 mm Mild steel 1000 x 2000 10 hickness (mm) 12 16 ound holes staggered - open area 51% diameter 12 mm - pitch 16 mm hickness (mm) Mild steel 1000 x 2000 1-1,5-2 - 3 AISI 304 1000 x 2000 1,5 28 SchACatLamIng07-329b-DF.indd 28 25-11-2008 11:06:30
12 18 ound holes staggered - open area 40% diameter 12 mm - pitch 18 mm Mild steel 1000 x 2000 4-6 hickness (mm) 12 20 ound holes staggered - open area 33% diameter 12 mm - pitch 20 mm Mild steel 1000 x 2000 8-10 hickness (mm) 29 SchACatLamIng07-329b-DF.indd 29 25-11-2008 11:06:31
15 20 ound holes staggered - open area 51% diameter 15 mm - pitch 20 mm hickness (mm) Mild steel 1000 x 2000 1-1,5-2 - 3 AISI 304 1250 x 2500 1000 x 2000 1,5-2 1,5 15 23 ound holes staggered - open area 39% diameter 15 mm - pitch 23 mm hickness (mm) Mild steel 1000 x 2000 4-5 30 SchACatLamIng07-329b-DF.indd 30 25-11-2008 11:06:31
20 28 ound holes staggered - open area 46% diameter 20 mm - pitch 28 mm hickness (mm) Mild steel 1000 x 2000 1-1,5-2 - 3-4 - 5 1250 x 2500 1,5-2 AISI 304 1000 x 2000 1,5 20 30 ound holes staggered - open area 40% diameter 20 mm - pitch 30 mm Mild steel 1000 x 2000 8 hickness (mm) 31 SchACatLamIng07-329b-DF.indd 31 25-11-2008 11:06:32
25 35 ound holes staggered - open area 46% diameter 25 mm - pitch 35 mm Mild steel 1000 x 2000 2 hickness (mm) 30 40 ound holes staggered - open area 51% diameter 30 mm - pitch 40 mm Mild steel 1000 x 2000 3 hickness (mm) 32 SchACatLamIng07-329b-DF.indd 32 25-11-2008 11:06:32
Square holes in line 90 C U C = size of the square U = distance between the center of holes C5 U7 C U Square holes in line - open area 51% size 5 mm - pitch 7 mm Mild steel 1000 x 2000 1-1,5 1250 x 2500 1 AISI 304 1000 x 2000 0,8-1 hickness (mm) 33 SchACatLamIng07-329b-DF.indd 33 25-11-2008 11:06:33
C5 U8 C U Square holes in line - open area 39% size 5 mm - pitch 8 mm Mild steel 1000 x 2000 1-1,5 hickness (mm) C8 U10 C U Square holes in line - open area 64% size 8 mm - pitch 10 mm Mild steel 1000 x 2000 1-1,5 AISI 304 1000 x 2000 1 hickness (mm) 34 SchACatLamIng07-329b-DF.indd 34 25-11-2008 11:06:34
C8 U12 C U Square holes in line - open area 44% size 8 mm - pitch 12 mm Mild steel 1000 x 2000 1-1,5-2 1250 x 2500 1-1,5-2 Galvanized 1000 x 2000 1,5 1250 x 2500 1,5 AISI 304 1000 x 2000 1-1,5 hickness (mm) C10 U12 C U Square holes in line - open area 69% size 10 mm - pitch 12 mm Mild steel 1000 x 2000 1-1,5 AISI 304 1000 x 2000 1-1,5 hickness (mm) 35 SchACatLamIng07-329b-DF.indd 35 25-11-2008 11:06:35
C10 U14 C U Square holes in line - open area 51% size 10 mm - pitch 14 mm Mild steel 1000 x 2000 1-1,5 hickness (mm) C10 U15 C U Square holes in line - open area 44% size 10 mm - pitch 15 mm hickness (mm) Mild steel 1000 x 2000 1-1,5-2 1250 x 2500 1-1,5-2 1500 x 3000 1,5 Galvanized AISI 304 1000 x 2000 1,5-2 1250 x 2500 1,5-2 1000 x 2000 1-1,5 36 SchACatLamIng07-329b-DF.indd 36 25-11-2008 11:06:36
C15 U20 C U Square holes in line - open area 56% size 15 mm - pitch 20 mm Mild steel 1000 x 2000 1,5 hickness (mm) 37 SchACatLamIng07-329b-DF.indd 37 25-11-2008 11:06:36
Slot holes staggered L4x20 Z16x25L 20 mm 16 mm 4 mm 25 mm Slot holes staggered - open area 38% hickness (mm) Mild steel 1000 x 2000 1-2 38 SchACatLamIng07-329b-DF.indd 38 25-11-2008 11:06:37
L5x20 Z20x25L 20 mm 20 mm 5 mm 25 mm Slot holes staggered - open area 38% hickness (mm) Mild steel 1000 x 2000 1,5 39 SchACatLamIng07-329b-DF.indd 39 25-11-2008 11:06:37
Decorative holes F45 Decorative holes - open area 44% hickness (mm) Mild steel 1000 x 2000 0,8 Aluminium 1000 x 2000 0,5 Aluminium GOLD anodized 1000 x 2000 0,5 Aluminium BONZE anodized 1000 x 2000 0,5 Aluminium WHIE coated 1000 x 2000 0,5 40 SchACatLamIng07-329b-DF.indd 40 25-11-2008 11:06:38
F8 Decorative holes - open area 37% hickness (mm) Mild steel 1000 x 2000 0,5-1 Aluminium 1000 x 2000 0,5 Aluminium GOLD anodized 1000 x 2000 0,5 Aluminium BONZE anodized 1000 x 2000 0,5 Aluminium WHIE coated 1000 x 2000 0,5 F8bis Decorative holes - open area 43% hickness (mm) Aluminium 1000 x 2000 0,5 41 SchACatLamIng07-329b-DF.indd 41 25-11-2008 11:06:41
F9 Decorative holes - open area 34% hickness (mm) Mild steel 1000 x 2000 1 Aluminium 1000 x 2000 0,5 Fortop LL5 mm 12,5 mm 9,5 mm 5 mm 25 mm 19,75 mm Fortop - open area 18% hickness (mm) Mild steel 1000 x 2000 1 42 SchACatLamIng07-329b-DF.indd 42 25-11-2008 11:06:42
Fortop LC 25 mm 9,5 mm 19,75 mm 12,5 mm 5 mm 5 mm Fortop - open area 18% hickness (mm) Mild steel 1000 x 2000 1 43 SchACatLamIng07-329b-DF.indd 43 25-11-2008 11:06:43
Aderstop he anti-slip perforated metal sheet Aderstop 30 mm 8 mm 8 mm 30 mm 30 mm 30 mm Aderstop - open area 5% he safety of an anti-slip metal sheet anti-slip on 3 heel-safe a drainage plate anti-panic Material ihckness (mm) Mild steel 1000 x 2000 3 1250 x 2500 3 AISI 304 1000 x 2000 2 44 SchACatLamIng07-329b-DF.indd 44 25-11-2008 11:06:44