Specification sheets for Panel Systems, Shower Pans, Shower Enclosures, and Accessories
, inc. Note: Hilton Design & Construction Standards Changes - Effective February 1, 2014 - Panel systems must have a pattern, a matte finish & color coordinate with vanity top - Panels must extend to the ceiling - Caulking must match color of panels - Granite surrounds are not allowed - Trim pieces must be scribed to the edge - Samples must be reviewed and approved prior to installation - Showers are required in all studio suites with single beds except when bathtubs are required - The minimum shower receptor dimensions must be 34 x 60 - Showers (not bathtubs) require a tempered, clear glass enclosure system with swinging door and an in-line fixed panel. Door must be frameless or semi-frameless, be a minimum 1/4 thick and have a through- the-glass, back to back handle. Bottom of door (sweep) and jamb (latch side) must have polycarbonates to assist in water retention. Stationary glass panel must be 3/8 thick minimum glass that is mounted to the floor and wall by U-channels. Header and/or center post are not allowed. Frame U-channels must be 3/4 to 1 1/2 wide, have an option of a silver/chrome, brushed or polished finish - Internal wood blocking secured to studs is required for all wall-mounted accessory items - For shower only units and bathtub/shower combos, 1 soapdish must be placed in the corner opposite the wet wall (showerhead wall), 48 AFF - For shower only units, a foot rest must be placed in the corner opposite the wet wall (showerhead wall) on the back wall, 15 AFF. Foot rests must not be freestanding, adjustable, or malleable. They must have structural integrity, be self-waterproofing, vandal-proof and shed water and soap quickly
12 x 24 Contemporary Series Panel System TS-CS/12x24 CSI Division 06 61 13 Dimensions:* 2 - end panels: 30-36 x 96 7 / 16 1 - back panel: 60 x 96 7 / 16 Thickness: 1/4 Standard Features: Sealed Surface Extremely Sanitary Matte Finish Mincey Classic TM MINCOR TM - Class A fire rated per ASTM e84 Accessory Options - Tubs:** 1 - SS-02 : Corner mount shampoo shelf 1 - SS-04 : Corner mount angular shampoo shelf 1 - SD-10 : Ceramic corner mount soapdish Accessory Options - Showers:*** 1 - SD-10 : Ceramic corner mount soapdish 1 - SS-02 : Corner mount shampoo shelf 1 - FR-02 : Corner mount foot rest 1 - SS-04 : Corner mount angular shampoo shelf 1 - FR-04 : Corner mount angular foot rest 30-36 60 30-36 Up to 96 7 / 16 Up to 96 7 / 16 Panels Must extend to the ceiling for tubs and showers. Drawing shows maximum mold dimensions. Cutting must be done on site to fit project requirements Tubs require 1 corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor Showers require 1 - corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor and 1 - foot rest must be placed in the corner opposite the showerhead on the back wall 15 above finished floor.
TS-OWC/13x20-SS CSI Division 06 61 13 Old World Classic Series 13 x 20 Staggered Stone Panel System Dimensions:* 2 - end panels: 30-36 x 104 1 - back panel: 60 x 104 Thickness: 1/4 Standard Features: Textured Matte Finish Sealed Surface Extremely Sanitary Mincey Classic TM MINCOR TM - Class A fire rated per ASTM e84 Accessory Options - Tubs:** 1 - SS-02 : Corner mount shampoo shelf 1 - SS-04 : Corner mount angular shampoo shelf 1 - SD-10 : Ceramic corner mount soapdish Accessory Options - Showers:*** 1 - SD-10 : Ceramic corner mount soapdish 1 - SS-02 : Corner mount shampoo shelf 1 - FR-02 : Corner mount foot rest 1 - SS-04 : Corner mount angular shampoo shelf 1 - FR-04 : Corner mount angular foot rest 30-36 60 30-36 Panels Must extend to the ceiling for tubs and showers. Drawing shows maximum mold dimensions. Cutting must be done on site to fit project requirements Tubs require 1 corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor Showers require 1 - corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor and 1 - foot rest must be placed in the corner opposite the showerhead on the back wall 15 above finished floor.
TS-VS/6x24 Vision CSI Division 06 61 13 6 x 24 Vision Panel System Dimensions:* 2 - end panels: 30-36 x 96 1 - back panel: 48-60 x 96 Thickness: 1/4 Standard Features: Textured Matte Finish Sealed Surface Extremely Sanitary Mincey Classic TM MINCOR TM - Class A fire rated per ASTM e84 Accessory Options - Tubs:** 1 - SS-02 : 3 piece corner mount shampoo shelf 1 - SS-04 : 3 piece corner mount angular shampoo shelf 1 - SD-10 : ceramic corner mount soap dish Accessory Options - Showers:*** 1 - SD-10 : Ceramic corner mount soapdish 1 - SS-02 : Corner mount shampoo shelf 1 - FR-02 : Corner mount foot rest 1 - SS-04 : Corner mount angular shampoo shelf 1 - FR-04 : Corner mount angular foot rest Panels Must extend to the ceiling for tubs and showers. Drawing shows maximum mold dimensions. Cutting must be done on site to fit project requirements Tubs require 1 corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor Showers require 1 - corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor and 1 - foot rest must be placed in the corner opposite the showerhead on the back wall 15 above finished floor.
TD-3460-OS/SF - L CSI Division 22 42 23 34 x 60 Trench Drain Shower Pan Size: 34 x 60 Drain Location: Off-Set - Left Curbs: 3 x 4 Integral Flange: Separate Trench: 4 1 2 width Weight: ~ 215# Drain Cover: Specify Standard or Decorative Standards and Ratings: ANSI Z124.1.2-2005 tested by NAHB ASTM 1028-96 coefficient of friction test (minimum rating of.67) Standard Features: Solid one - piece construction Abrasion resistant gel coat surface Extremely sanitary Will not mold or mildew Textured non - slip finish Pre-leveled - rests on sub floor Mincey Classic TM Suggested Drains: Sioux Chief Mfg. model: 825-2P - PVC Oatey part number: 42045 - PVC Oatey part number: 42150 - Brass Kohler model: K9132 - Stainless Steel Drain not included Standard Drain Cover: Decorative Drain Cover: 3 drain curb 4 Note: Pan dimensions vary +/- 1/8
TD-3460-OS/SF - R CSI Division 22 42 23 34 x 60 Trench Drain Shower Pan Size: 34 x 60 Drain Location: Off-Set - Right Curbs: 3 x 4 Integral Flange: Separate Trench: 4 1 2 width Weight: ~ 215# Drain Cover: Specify Standard or Decorative Standards and Ratings: ANSI Z124.1.2-2005 tested by NAHB ASTM 1028-96 coefficient of friction test (minimum rating of.67) Standard Features: Solid one - piece construction Abrasion resistant gel coat surface Extremely sanitary Will not mold or mildew Textured non - slip finish Pre-leveled - rests on sub floor Mincey Classic TM Suggested Drains: Sioux Chief Mfg. model: 825-2P - PVC Oatey part number: 42045 - PVC Oatey part number: 42150 - Brass Kohler model: K9132 - Stainless Steel Drain not included Standard Drain Cover: Decorative Drain Cover: 3 drain curb Note: Pan dimensions vary +/- 1/8 4
30-36 x 60 Curved Front Shower Pan CFP-30-3660-OS/SF - R CSI Division 22 42 23 Size: 30 x 36 x 60 Drain Location: Off-Set - Right Curb: 3 1/2 x 4 Integral Flange: Separate - Fiberglass Weight: ~210# Standards and Ratings: ANSI Z124.1.2-2005 tested by NAHB ASTM 1028-96 coefficient of friction test (minimum rating of.67) Standard Features: Solid one - piece construction Abrasion resistant gel coat surface Extremely sanitary Will not mold or mildew Textured non - slip finish Pre-leveled - rests on sub floor Mincey Classic TM Suggested Drains: Sioux Chief Mfg. model: 825-2P - PVC Oatey part number: 42045 - PVC Oatey part number: 42150 - Brass Kohler model: K9132 - Stainless Steel Drain not included Note: Pan dimensions vary +/- 1/8
30-36 x 60 Curved Front Shower Pan CFP-30-3660-OS/SF - L CSI Division 22 42 23 Size: 30 x 36 x 60 Drain Location: Off-Set - Left Curb: 3 1/2 x 4 Integral Flange: Separate - Fiberglass Weight: ~210# Standards and Ratings: ANSI Z124.1.2-2005 tested by NAHB ASTM 1028-96 coefficient of friction test (minimum rating of.67) Standard Features: Solid one - piece construction Abrasion resistant gel coat surface Extremely sanitary Will not mold or mildew Textured non - slip finish Pre-leveled - rests on sub floor Mincey Classic TM Suggested Drains: Sioux Chief Mfg. model: 825-2P - PVC Oatey part number: 42045 - PVC Oatey part number: 42150 - Brass Kohler model: K9132 - Stainless Steel Drain not included Note: Pan dimensions vary +/- 1/8
SP-3460-C/IF CSI Division 22 42 23 34 x 60 Standard Shower Pan Specifications Size: 34 x 60 Drain Location: Center Curb: 3 x 3 1/2 Integral Flange: Intergal Weight: ~251# Options Standards and Ratings: ANSI Z124.1.2-2005 tested by NAHB ASTM 1028-96 coefficient of friction test (minimum rating of.67) Standard Features: Solid one - piece construction Abrasion resistant gel coat surface Extremely sanitary Will not mold or mildew Textured non - slip finish Pre-leveled - rests on sub floor Mincey Classic TM Suggested Drains: Sioux Chief Mfg. model: 825-2P - PVC Oatey part number: 42045 - PVC Oatey part number: 42150 - Brass Kohler model: K9132 - Stainless Steel Drain not included 59 3 / 4 Integral flange 17 34 30 Integral 3 1/2 curb 3 3 drain Note: Pan dimensions vary +/- 1/8 curb 3 1 / 2
Napoli Bow Front Barn Door Enclosure NAPBF 6075 CSI Division 10 28 19 NAPBF6075PC8mm - L Series: Napoli Door Style: Bow Front Dimensions: 60 x 75 x 5/16 Hardware Finish: Polished Chrome Glass Thickness: 8mm Opening: Left Glass Finish: Clear NAPBF6075PC8mm - R Series: Napoli Door Style: Bow Front Dimensions: 60 x 75 x 5/16 Hardware Finish: Polished Chrome Glass Thickness: 8mm Opening: Right Glass Finish: Clear NAPBF6075BS8mm - L Series: Napoli Door Style: Bow Front Dimensions: 60 x 75 x 5/16 Hardware Finish: Brushed Silver Glass Thickness: 8mm Opening: Left Glass Finish: Clear NAPBF6075BS8mm - R Series: Napoli Door Style: Bow Front Dimensions: 60 x 75 x 5/16 Hardware Finish: Brushed Silver Glass Thickness: 8mm Opening: Right Glass Finish: Clear General Specifications 75 Tall Brushed or Polished Finish Specify Left or Right Opening Single Sliding Door Frameless rev. 11-5-13
MM-HINGED CSI Division 10 28 19 Hinged Shower Door Enclosure MMHINGE-PS-8M Door Style: Hinged Door Dimensions: 75 x 5/16 Hardware Finish: Polished Silver Glass Thickness: 8mm Glass Finish: Clear MMHINGE-BS-8M Door Style: Hinged Door Dimensions: 75 x 5/16 Hardware Finish: Brushed Silver Glass Thickness: 8mm Glass Finish: Clear MMHINGE-PS-10M (USA) Door Style: Hinged Door Dimensions: 75 x 3/8 Hardware Finish: Polished Silver Glass Thickness: 10mm Glass Finish: Clear MMHINGE-BS-10M (USA) Door Style: Hinged Door Dimensions: 75 x 3/8 Hardware Finish: Brushed Silver Glass Thickness: 10mm Glass Finish: Clear General Specifications 75 Tall Brushed or Polished Finish Single Hinged Door Reversible Frameless Optional Towel Bar rev. 7-29-13
3 Piece Foot Rest FR-02 CSI Division 10 28 16 Size: 6 x 6 x 6 1/2 Height: 11 1/2 Type: Corner mount Finish: Matte Tubs require 1 corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor Showers require 1 - corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor and 1 - foot rest must be placed in the corner opposite the showerhead on the back wall 15 above finished floor.
FR-04 CSI Division 10 28 16 Angular Foot Rest Size: 6 x 6 x 6 1/2 Height: 11 1/2 Type: Corner mount Finish: Matte Tubs require 1 corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor Showers require 1 - corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor and 1 - foot rest must be placed in the corner opposite the showerhead on the back wall 15 above finished floor.
SS-02 CSI Division 10 28 16 3 Piece Shampoo Shelf Size: 6 x 6 x 6 1/4 Height: 6 Type: Corner mount Finish: Matte Tubs require 1 corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor Showers require 1 - corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor and 1 - foot rest must be placed in the corner opposite the showerhead on the back wall 15 above finished floor. rev. 7-29-13
SS-04 CSI Division 10 28 16 Angular Shampoo Shelf Size: 7 x 7 x 10 Height: 1 1/2 Type: corner mount Finish: matte Options Tubs require 1 corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor Showers require 1 - corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor and 1 - foot rest must be placed in the corner opposite the showerhead on the back wall 15 above finished floor.
SD-10 CSI Division 10 28 16 Ceramic Corner Mount Soapdish Size: 6 3/4 x 6 3/4 Height: 2 1/4 Type: Corner mount Finish: Matte Tubs require 1 corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor Showers require 1 - corner mount soap dish/shampoo shelf placed in the corner on the showerhead wall, 48 above finished floor and 1 - foot rest must be placed in the corner opposite the showerhead on the back wall 15 above finished floor. rev. 8-19-13