ACCESSORY INSTALLATION INSTRUCTIONS 143T 143T 143T 1431T 143T 14451T 14455T 14456T 1445T 1445T 14461T 14463T Brush Holder 1142345** Covered Toilet Paper Holder Brush Holder 24 Double Towel Bar 24 Double Towel Shelf 24 Towel Bar Glass Shelf Towel Ring Robe Hook Toilet Papaer Holder Soap Dish Tumbler Holder BEFORE YOU BEGIN All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time without notice. Please leave these instructions for the consumer. They contain important information. NOTE: These products should be located and mounted to a wall. While it is possible to mount them to any surface, a stud or concrete mounted product will yield the best results. 1142346 DANGER: (Risk of personal injury ) These products are not designed or intended for use as a grab bar or support bar. Do not install where the product might be used as a grab or support bar. ROUGH-IN DIMENSIONS 110 120 1161640 3 31 124 23 5.6 61 21 16. 11 3006135 1 12 1142 6 154.5 143T 13.5 3.5 4 122 143T 104 1
610 3.5 143T 1431T 143T 11 141.5 131.5.5 Covered Toilet Paper Holder 24 Double Towel Bar 24 Double Towel Shelf 1431T 610 43.5 222 15 2 5 43.5 114314 2 2 2 1014 3634 0 143T 65 610 110466** 10135** 10163** 1014 3634 5 10163** 14451T 1014 120 10135** 3 110466** 3634 1014 3634 10163** 2 152 1445T 14461T 2
How To Install The Tumbler Holder 145 34 16 160 35 11 Remove the tumbler(36) from tumbler holder kit as required. Assemble it back to the tumbler holder kit after use. 36 Slide the escutcheon() onto bracket. Insert the extension(35) of the tumbler holder kit(34) onto bracket, orienting the screw hole of extension downward. Tighten the screw() with the hex wrench() to secure the tumbler holder kit. 40 INSTALLATION CHECKOUT Ensure that all connections are tightened. 5 52 Ensure all setscrews face straight down. 14455T CLEANING INSTRUCTIONS 102 1445T 5 65 All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with a clean soft cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc. Which could adversely affect the finish and are not recommended for cleaning. Do not use abrasive cleaners or solvents on Kohler faucets and fittings. 160 146 211 2 14456T 12 2 123 10 3 14463T INSTALLATION How To Install The Bracket Only For 14451T/14455T/1431T/143T As Fig 1 shown, select a location on the vertical wall to stick the templet, ensure the templet is horizontal. Drill hole in the finished wall as required. 6 PN: XXXXXXX Only for 14451T/14455T/1431T/143T Fig 1 3
For All Products(Except For 14451T/14455T/1431T/143T) How To Install The Towel Shelf 2 Select a location on the vertical wall to install the bracket. Fig 2 As Fig 2 shown, mark anchor(1) mounting hole location on wall as shown, ensure the large slotted mounting hole of the bracket(2) upward, the smaller hole of the bracket downward and two screw holes are vertical. Drill hole in the finished wall as required. 4 2 4 Slide the escutcheon() onto each bracket. Insert two extensions(22) onto each bracket, orienting the screw hole of extension downward. Tighten the screw() with the hex wrench() to secure the extension. Slide the shelf(24) onto the slot of each extension, orienting the shelf horizontal and symmetrical. Tighten the screws(23) with a screw driver to secure the shelf. How To Install The Covered Toilet Paper Holder 6 24 10 26 Slide the escutcheon() onto bracket. Insert the extension(26) of the towel ring kit() onto bracket, orienting the screw hole of extension downward. Tighten the screw() with the hex wrench() to secure the towel ring kit. How To Install The Robe Hook How To Install The Toilet Brush Holder 12 15 13 11 2 How To Install The Toilet Paper Holder 30 Slide the escutcheon() onto bracket. Insert the extension(30) of the paper holder kit(2) onto bracket, orienting the screw hole of extension downward. Tighten the screw() with the hex wrench() to secure the paper holder kit. Remove the brush kit(12) from the brush holder kit as required. 2 Slide the escutcheon() onto bracket. Insert the extension(2) of the robe hook kit(2) onto bracket, orienting the screw hole of extension downward. Tighten the screw() with the hex wrench() to secure the robe hook kit. 14 Keeping screw hole of the escutcheon(14) downward, aligning bulge of the bracket with slot of the escutcheon, slide the escutcheon onto the bracket, tighten the screw(13) with the hex wrench() to secure the escutcheon. Then orienting the bulge(11) of the brush holder kit(15) align with the larger hole of the escutcheon(14) to install the brush holder kit onto the escutcheon. 2 How To Install The Soap Dish How To Install The Double Towel Bar Slide the escutcheon() onto each bracket. Insert the extension(1) of the towel bar kit(16) onto bracket, orienting the screw hole of extension downward. Tighten the screw() with the hex wrench() to secure the towel bar kit. 1 Slide the escutcheon() onto bracket. Insert the extension() of the soap dish kit(31) onto bracket, orienting the screw hole of extension downward. Tighten the screw() with the hex wrench() to secure the soap dish kit. 16 Remove the dish(32) from soap dish kit for cleanning as required. After cleanning, assemble it back to the soap dish kit. 22 23 How To Install The Towel Ring If needed, remove the cover(5) from the paper holder kit to install toilet paper, then reinstall the cover. NOTE: Install shelf(24) with the frosted surface downward. 5 20 How To Install The Glass Shelf 3 Fig 5 Slide the escutcheon() onto the bracket. Insert the extension(6) of the paper holder kit(10) onto the bracket, orienting the screw hole of the extension downward. Tighten the screw() with the hex wrench() to secure the paper holder kit. 21 Fig 4 As Fig 5 shown, press the anchor(1) into the holes. Orienting the straight edge of the bracket(4) vertically, secure the bracket with self-tapping screw(3). Slide the escutcheon() onto each bracket. Insert the extension(21) of the towel bar kit(20) onto bracket, orienting the screw hole of extension downward. Tighten the screw() with the hex wrench() to secure the towel bar kit. 3 For All Products 1 1 How To Install The Towel Bar 1 As Fig 4 shown, press the anchor(1) into the hole. Orienting the large slotted mounting hole of the bracket upward, the smaller hole of the bracket downward and two screw holes are vertical, secure the bracket(2) with the self-tapping screw(3). 1 Fig 3 As Fig 3 shown, mark anchor(1) mounting hole location on wall as shown, ensure two long straight edges of the bracket(4) are vertical. Drill hole in the finished wall as required. Slide the escutcheon() onto each bracket. Insert the extension(1) of the towel shelf kit(1) onto bracket, orienting the screw hole of extension downward. Tighten the screw() with the hex wrench() to secure the towel shelf kit. 4 32 31 5
14451T 14455T 24 Towel Bar Glass Shelf 110466 110466 10135** 10130** 1014 1016 113** 10163** 1014 3634 10130** 1014 1014 1016 10163** 3634 10160
14456T 1445T 1445T 14461T 14463T Towel Ring Robe Hook Toilet Papaer Holder Soap Dish Tumbler Holder 10103 110466 113** 1014 10102 10116** 1014 1014 1014 1014 01 10162** 10