The Motorcutter (PB-64) is designed by Pieter Beeldsnijder - Edam and build by Flevo Jachtbouw - Nijkerk/Netherlands. This is a heavy displacement, truly ocean going gentleman s canoe stern yacht. Her classic lines, the elegant teak interior and panelling throughout the entire yacht give a warm and welcome feeling. The huge open salon with open galley makes her an ideal family yacht. The aft section offers a spacious owners cabin with en-suit bathroom. In the fore section there are two cabins of which one large twin s bed and one cabin with upper and lower beds, the cabins sharing a big bathroom. There is no difference in quality of decoration between the forward cabins or the aft one, the materials having been used are all the same & needless to say all of very high quality. The fore and aft deck offers large sunbathing areas together with nice shaded areas. The Mottorcutter is Available in length, at 16.15-1940 and 22 meters Lay-out accommodation deck from front to aft Forepeak with storage and chainlockers. Watertight bulkhead. 2 Guest stateroom and bathroom. Kitchen en dinette Watertight engine room bulkhead with watertight door. Owners stateroom and bathroom. Aftpeak with storage The choice of technology, interior design and materials is always prepared in cooperation with our customers. Also the choice of the technique and the materials of the list is a result of customer-yard Pagina 1
Pagina 2
Technical description PB 64 Motorcutter General Hull type Roud build ocean going motoryacht, Semi-dispalcement Naval Architect PB design Edam Classification CE A Ocean Hull Steel Superstructure Steel ( option Aluminium ) Accommodation OWNER + GUESTS Cabins 6 beds in 3 cabins Full-beam master suite, two twin quests cabins Dimensions Length overall Length waterline Beam overall Draft Displacement circa 19.45 mtr. 16.85 mtr. 5.60 mtr, 1.70 mtr. 65 ton Technical Details Max. speed ( 50% load) ca 11 knots Fuel capacity ca. 8.500 ltr. Fresh water capacity ca. 2.000 ltr. Grey & black capacity ca. 1.000 ltr. Pagina 3
Propulsion Main engines 1 x John Deere 6025 AFM75 402 pk @ 1900 rev/min Gearboxes Twin Disc 5082SC, reduction 2.53:1 Propeller shafts Water lubricated Duplex 1.4462 70 mm Thruster (,s) Bow and Stern, 25 pk each Stabilizing Naiad 353 Anchor equipment Anchors Chain Anchor winch 1 x HHP POOL-N 70 kg galvanized balanced 1 x 70 mtr. 13 mm galvanised 1x Muir VR 4000 hydraulic Electric system Power systems Generator Main service bank Start batteries Transformers Loading system Mastervolt 12 24 230 volt Wisper 10 kw Gel-traction 12 x 2V 1000 Ah 2 x 24 volt 200 Ah 1 x Mass Sine 24/5000 VA 230V 1 x Mass 24/100-C 230V 1 x IVO Smart 12/10 230V Pagina 4
Several Central heating Exhaust system Hydrofoor Bilgepumps Deckwashpump Windows Portholes Hatches Kabola HR 500 combi Halyard silencer + separator & waterlock 1 x Jabsco 16.3 l/min 24V 1 x Jabsco 53080, 2 x Rule 100 l/min. 1 x Rheinstrom 4E Hora 12-10-6 mm 16 x Belship, type SCM 200x400 mm 5 x Belship Pagina 5
Pagina 6
Pagina 7