MTECH 2017 October 04-07, 2017, Zadar, Croatia ORGANISED BY Croatian Society for Materials andtribology HDMT Croatian Center for Nondestructivetesting CENI Croatian Society for Heat Treatment and Sufrace Engineering HDTOIP Croatian Society for materials protection HDZaMa WITH THE SUPPORT OF PARTNERS SPONSORED BY
PROGRAM COMMITTEE: Željko Alar (President), Vesna Alar, Franjo Cajner, Danko Ćorić, Gorazd Fajdiga (UNI LJ), ImreFelde (UNI OBUDA), Hrvoje Ivanković (FKIT), Ivan Juraga, Ivica Kladarić (SFSB), Darko Landek, Igor Majnarić (GRF), Damir Markučič, Božidar Matijević, Helena OtmačićĆurković (FKIT), DuškoPavletić (RITEH), Zdravko Schauperl, Božo Smoljan (RITEH), Josip Stepanić, Ivan Stojanović, Vinko Šimunović, Johann Wilhelm Eming (BAM), Angela Topić (FSR Mostar), Mato Pavlović (BAM Berlin). ORGANIZING COMMITTEE: Matija Sakoman (President), Tamara Aleksandrov Fabijanić, Antonio Ivanković, Dario Iljkić, Suzana Jakovljević, DragutinJuraj, Krešimir Kekez, Tomislav Kezele, Saša Kovačić, Ivan Kumić, Marin Kurtela, Morana Mihaljević, Andrijana Milinović, Miroslav Omelić, Tihomir Polanović, Marijana Serdar, Mateja Šnajdar Musa. TECHNICAL COMMITTEE: Ljiljana Pedišić (INA), Džo Mikulović (MESA Electronic GmbH), Roman Tomat (Schunk Wien GmbH), Mladen Stupnišek (Feliks Metal), Zdravko Prošić (PRO-C.T.I.), Jerko Prlić (Anton Paar Croatia), Marko Ebert (EBERT), Dario Karlovčan (OPT Agencija), Ante Dizdar (OPT d.o.o.), Marko Rakvin (TUV Croatia), Branko Šeparović (Altmont), Zvonimir Ivković (ĐĐ TEP), Martin Miculinić (ZIT), Damir Pinotić (STSI), Mladen Franjković (STSI), Karla Rončević (Helios), Ivana Radić Boršić (Cortec Corporation Europe), Robert Iveković (IVEKOVIĆ-TZM). TOPICS: Materials and processes, Materials characterization, Nanomaterials and nanotechnology, Metallurgy, Friction, wear and lubrication, Coatings, Advanced surface modification and coating technologies, Vacuum heat treatment, Heat treating equipment, Quenchants and quenching technology, Mathematical modelling and process simulation of heat treatment, Corrosion, Corrosion protection methods, Corrosion resistant materials, Non-destructive testing and evaluation, In-service inspection, Certification and accreditation, Measurement and quality assurance. Conference Chairman Prof. dr. sc. Željko Alar
VENUE AND DATE: MTECH International Conference will be held at Hotel Kolovare in Zadar, from 4-7 October, 2017. HOTEL KOLOVARE is located near historical sights of the ancient city of Zadar. City of Zadar is know as cultural, economic and administrative center of Northern Dalmatia. LOCATION OF CONFERENCE HOTEL: Hotel KOLOVARE is located at Bože Peričića 14, 23 000 Zadar, Croatia HOW TO REACH THE CONFERENCE HOTEL: BY PLANE: The Zadar airport - Zemunik (ZAD) is very well connected to bigger towns of Croatia and Europe and it is situated only 20 minutes by car far from Zadar. BY CAR: You can come to Zadar from several directions and the highway A1, route Zagreb - Split, is the quickest and best of all. The best exit from the highway is at the knot Zadar east or Zadar west. If you are coming from Rijeka, you can take the Adria road - route D8. BY FERRY: If you are coming from the direction of Italy, the shortest possible route is through Ancona by ferry to Zadar. BY BUS: Zadar is the centre of north Dalmatia and very well connected with other Croatian and bigger European towns. CONFERENCE HALLS: A total of 4 conferece halls will be used for the purpose of the conference: KOLOVARE Hall Opening ceremony, Invited lectures, Gala Dinner Meeting room 1 - Lectures Meeting room 2 Poster session, Coffee breaks, Sponsor exibition Meeting room 3 - Lectures
PROGRAMME OVERVIEW DAY 0 TUESDAY 03.10.2017. 20.00h WELCOME RECEPTION for Workshop participants DAY 1 WEDNESDAY 04.10.2017. 10.00h Workshops http://mtech.com.hr/seminar 20.00 h WELCOME RECEPTION for Conference participants DAY 2 THURSDAY 05.10.2017. 8.30-9.00 h REGISTRATION DESK 9.00-9.20h OPENING CEREMONY 9.20-10.30 h INVITED LECTURES 10.30-11.00 h COFFEE BREAK 11.00-13.00 h LECTURES 13.00-14.30h LUNCH BREAK 14.30-16.30 h LECTURES 16.30-17.00h COFFEE BREAK 17.00-18.00 h POSTER SESSION 19.00 h ZADAR CITY TOUR & WINEARY ŠKAULJ DAY 3 FRIDAY 06.10.2017. 9.20-10.30 h INVITED LECTURES 10.30-11.00 h COFFEE BREAK 11.00-13.00 h LECTURES 13.00-14.30h LUNCH BREAK 14.30-16.30 h LECTURES 16.30-17.00h COFFEE BREAK 17.00-18.00 h POSTER SESSION 20.30 h GALA DINNER DAY 4 SATURDAY 07.10.2017. 10.00h FULL DAY EXCURSION TO KORNATI NATIONAL PARK
OFFICIAL LANGUAGES: Official languages of the Conference are Croatian and English. CONFERENCE BADGE: Everyone is kindly requested to wear her/his name badge during the Conference as it provides access to the scientific sessions, poster session, lunches, coffee breaks and conference gala dinner. LUNCHES AND COFFEE BREAKS: Lunches will be served during the conference days at the hotel restaurant. Coffee breaks will be served at the conference Meeting room II according to the program timetable. TECHNICIANS SERVICE: All speakers should check and upload their presentations at the Registration desk (in the lobby of Kolovare Hotel) at the latest in the breaks just before the relevant session. Technical support willbe at your service during the opening hours of the Registration desk. DURATION OF PRESENTATION: Due to the tight presentation schedule each participant selected for presentation is kindly asked to present his work in 12 min. Additional 3 min is left for the discussion of each presentation. All speakers are kindly asked to prepare the presentation in English in a PowerPoint format and to save it on a USB memory device. POSTER PRESENTATION: Posters will be exhibited in the conference Meeting room II. All authors participating at MTECH 2017 with posters have to print posters and bring them to the conference. The Conference Secretariat will provide pins, glue tape and assistance for posters set-up. Poster size should be 70 cm x 100 cm (that is width x height; portrait format). Organizing Committee is unfortunately not able to offer a Poster Printing Service. REGISTRATION: All participants at MTECH 2017 have to register via http://mtech.com.hr/registration. 15 th July 2017 - preliminary program and early registration discount payment -10%
ZADAR CITY TOUR &WINEARY ŠKAULJ: Date and time:thursday, 05 th October, 19.00 For those eager to discover beauties of Zadar, a City Tour will be organized starting from Hotel Kolovare. After the Tour a transver via Coaches is planed to Winery Škaulj, where a traditional dinner, and tasting of rewarded wines will be held. EXCURSION TO KORNATI NATIONAL PARK: Date and time: Saturday, 07 th October, 10.00 To make your stay in Zadar pleasant, we have planned additional social event. Please consider joining us during the full day excursion, that will start from the hotel reception, on Kornati National Park. Thease islands are the most indented group of islands in the European Mediterranean of the most exceptional landscape value which was given the status of national park in 1980. More than three quarters of the Park s surface belong to the sea, whereas the land part consists of 89 islands, islets and reefs in the total surface of 50 km 2. CONFERENCE WELCOME DRINK: Date and time: Wednesday, 04 th October, 20:00 Venue: Hotel Kolovare, Zadar, terrace The Organizers invite all guests to enjoy a breathtaking panorama, together with the appropriate welcome drink and snack in the pool area of the Hotel Kolovare. Dress code: Casual CONFERENCE GALA DINNER: Date and time: Friday, 05 th October, 20:30 Venue: Hotel Kolovare, Zadar The Organizers welcome all participants to spend a charming evening on the terrace and in the Kolovare Hall. The unique location, excellent cuisine, professional service and special care for details, make the hotel Kolovare an ideal place for the conference banquet. Discover the romantic ambience with the sounds of the traditional music and variety of uniques flavors which charm even the most discerning guests! Dress code: Formal