LIST 2017 Master Flame Fire Pit Screens, Fire Grates and Vented Gas Log Systems Made in the USA masterflamegaslogs.com
Fire Pit Products For Larger or Customized Screens and Grates, see Back Cover Twin Access Panels Pivot PIVOT ACCESS FIRE PIT SCREEN TWIN ACCESS FIRE PIT SCREEN Master Flame Fire Pit Safety Screen Helps prevent accidents, contains incendiary sparks, ash and soot. Open either side of the clamshell styled pivot screen for access and simple fire management. Available in welded carbon steel, stainless steel or hybrid 1/4" x 1" solid steel flat bar framework Steel mesh screen (8 x 8 per/sq. inch; 23 gauge steel wire) Stainless steel hardware and handles weather-resistant black finish NOTE: Screen Height is equal to 1/2 the diameter. Pivot Screen Right Side Open Round Pivot Fire Pit Screen Sizing: 24 to 60 Diameter Height is proportional (1/2 of diameter) All screens up to 47 diameter are 4 panel All screens over 48 diameter are 8 panel Over 60 diameter - CALL FOR QUOTE Brushed Finish Available for Stainless Steel Models - $75 UPCHARGE STANDARD BLACK FINISH OPTIONAL STAINLESS STEEL Pivot Screen Left Side Open OPTIONAL HYBRID STANDARD CARBON STEEL Master Flame Fire Pit Safety Screen Helps prevent accidents, contains incendiary sparks, ash and soot. Two hinged doors (panels with decorative handle) allow access and simple fire management. Available in welded carbon steel, stainless steel or hybrid (Refer to page1.) 1/4" x 1" solid steel flat bar framework Steel mesh screen (8 x 8 per/sq. inch; 23 gauge steel wire) Stainless steel hardware and handles weather-resistant black finish NOTE: Screen Height is approximately 17 unless specified. Both Hinged Access Doors Open Round Pivot Fire Pit Screen Sizing: 24 to 60 Diameter Height is approximately 17 unless specified Over 60 diameter - CALL FOR QUOTE Brushed Finish Available for Stainless Steel Models - $75 UPCHARGE PIVOT ROUND Framework 304 Stainless Carbon Steel Carbon Steel Mesh Stainless Steel Stainless Steel Carbon Steel Hardware Stainless Steel Stainless Steel Stainless Steel HINGED ROUND SAFETY SCREEN PIVOT ROUND 24 THRU 29 30 THRU 35 36 THRU 41 42 THRU 47 48 THRU 52 53 THRU 60 per inch ADDER to 52 CARBON STEEL $290 $345 $415 $445 $570 $25 HYBRID $325 $390 $495 $535 $680 $30 304 STAINLESS STEEL* $470 $560 $635 $660 $810 $40 SAFETY SCREEN HINGED 24 THRU 29 30 THRU 35 36 THRU 41 42 THRU 47 48 THRU 52 53 THRU 60 per inch ADDER TWO ACCESS PANELS to 52 (TWIN DOORS) ROUND CARBON STEEL $570 $690 $715 $740 $755 $25 HYBRID $590 $710 $750 $790 $840 $30 304 STAINLESS STEEL* $770 $930 $955 $985 $1004 $40 Brushed Finish Available for $75 UPCHARGE Approximate Unit Weight: 1lbs per inch of diameter (Example 42 Diameter Screen weighs about 42 lbs.) How to determine screen size to order from Master Flame Dealer For Round: Measure pit inside diameter and add 4. Brushed Finish Available for $75 UPCHARGE Approximate Unit Weight: 1lbs per inch of diameter (Example 42 Diameter Screen weighs about 42 lbs.) How to determine screen size to order from Master Flame Dealer For Round: Measure pit inside diameter and add 4. 1 RETAIL PRICE LIST 1/4 x 1 Bar 2
Fire Pit Products Lift Off Dome Single Access Panel LIFT OFF DOME FIRE PIT SCREEN Master Flame Fire Pit Safety Screen Helps prevent accidents, contains incendiary sparks, ash and soot. Lift off screen to tend fire (poker required when hot). Available in welded carbon steel, stainless steel or hybrid (Refer to Page 1.) 1/4" x 1" solid steel flat bar framework Steel mesh screen (8 x 8 per/sq. inch; 23 gauge steel wire) Stainless steel hardware and handles weather-resistant black finish LIFT OFF DOME SAFETY SCREEN LIFT OFF DOME NOTE: Screen Height is approximately 17 unless specified. 24 THRU 29 Stainless steel hardware electrostatically applied, weather-resistant black finish Brushed Finish Option: ALL STAINLESS STEEL Fire Pit Screens can be brush finished for a $75 UPCHARGE (NO BLACK FINISH). 30 THRU 35 Round Dome Fire Pit Screen Sizing: 24 to 60 Diameter Height is approximately 17 All screens up to 47 diameter are 4 panel All screens over 48 diameter are 8 panel Over 60 diameter - CALL FOR QUOTE Brushed Finish Available for Stainless Steel Models - $75 UPCHARGE Dome-Shaped Fire Pit Screen (Poker Required) 36 THRU 41 42 THRU 47 48 THRU 52 53 THRU 60 per inch ADDER to 52 CARBON STEEL $255 $305 $360 $385 $440 $25 HYBRID $290 $345 $420 $460 $515 $30 304 STAINLESS STEEL* $435 $520 $550 $565 $620 $40 SINGLE ACCESS FIRE PIT SCREEN Master Flame Fire Pit Safety Screen Helps prevent accidents, contains incendiary sparks, ash and soot. Hinged front door (panel with handle) opens up for access and simple fire management. Available in welded carbon steel, stainless steel or hybrid (See page 1.) 1/4" x 1" solid steel flat bar framework Steel mesh screen (8 x 8 per/sq. inch; 23 gauge steel wire) Stainless steel hardware and handles weather-resistant black finish Square / Rectangular Fire Pit Screen Sizing: Up to 180 (Length + Width x 2) Handle on top and handle on door Height is 17 unless specified Over 180 Perimeter, Use per inch adder Custom sizes or 360 Perimeter - CALL FOR QUOTE HINGED SQUARE / RECTANGLE SAFETY SCREEN HINGED SINGLE ACCESS PANEL (SINGLE DOOR) SQ. / Rectangle 17 Height Up to 96 17 Height From 97 up to 144 Hinged Panel Open Hinged Rectangle Model NOTE: Screen Height is approximately 17 unless specified. 17 Height From 145 to 180 181 + per inch ADDER to 180 CARBON STEEL $625 $750 $850 $9 HYBRID $715 $840 $995 $11 304 STAINLESS STEEL* $805 $965 $1115 $15 Brushed Finish Available for $75 UPCHARGE Approximate Unit Weight: 1lbs per inch of diameter (Example 42 Diameter Screen weighs about 42 lbs.) How to determine screen size to order from Master Flame Dealer For Round: Measure pit inside diameter and add 4. Brushed Finish Available for $75 UPCHARGE Approximate Unit Weight: 1lbs per inch of diameter (Example 42 x 42 Square Screen weighs about 42 lbs.) How to determine screen size to order from Master Flame Dealer For Square/Rectangle: 2 to inside pit dimensions (2 to length and 2 to width). 3 RETAIL PRICE LIST 1/4 x 1 Bar 4
Fire Pit Products WELDED STEEL FIRE PIT GRATES Master Flame Round Fire Pit Grate Round grate shape is ideal for campfires, fire pits or corner wood-burning fireplaces. Master Flame grates are a great update for old cast iron grates. Choice of welded 5/8" carbon steel bar stock or stainless steel bar stock Standard Sizes - Diameter Tip to Tip (Tine): 38, 36, 33, 30, 27, 24 4 legs for optimal air circulation (longer or shorter legs available for $10 UPCHARGE) Optional Char-Guard Ember Catch Round Fire Grate 5/8 Bar Master Flame Square Fire Pit Grate For square fire pits, these fire grates are weld steel bar design. Master Flame grates are a great update for old cast iron grates. Choice of welded 5/8" carbon steel bar stock or stainless steel bar stock Square Sizes - 24 x 24, 27 x 27, 30 x 30, 36 x 36, 38 x 38 4 legs for optimal air circulation (longer or shorter legs available for $10 UPCHARGE) Optional Char-Guard Ember Catch Square Grate 5/8 Bar NEW PRODUCT Round Fire Grate with Char-Guard Ember Catch Square Fire Grate with Char-Guard Ember Catch NOTE: Square Fire Pit Grates Require 3 Clearance All Around ROUND GRATES FIRE PIT GRATE ROUND 24 27 30 33 36 38 Over 38 per inch ADDER to 38 5/8 CARBON STEEL $154 $170 $190 $220 $275 $330 $15 5/8 STAINLESS STEEL $480 $516 $650 $692 $730 $760 $30 CHAR-GUARD Ember Catch Option 24 Grate to 27 Grate to Char-Guard Models Char Guard Option improves complete burn consistency, simplifies ash clean-up and allows you the choice of using charcoal. Char Guard is a heavy duty steel mesh fitted and welded to the underside of the grate. Approx. Weight of Grate: 43 lbs 54 lbs 64 lbs 70 lbs 77 lbs 82 lbs 30 Grate to 33 Grate to 36 Grate to 38 Grate to Over 38 to $36 $42 $52 $67 $100 $100 $100 Sizing: Round Grates should have minimum gap of 3 all-around. Measure inside fire pit and subtract 6 from the diameter SQUARE GRATES FIRE PIT GRATE SQUARE 24 x24 27 x27 30 x30 33 x33 36 x36 38x38 Sizing: Square Fire Pit Grates should have minimum gap of 3 all-around. Measure inside fire pit and subtract 6 for maximum recommended size. Over 38 per inch ADDER to 38 5/8 CARBON STEEL $170 $185 $205 $240 $300 $360 $15 5/8 STAINLESS STEEL $528 $565 $650 $760 $800 $830 $30 CHAR-GUARD Ember Catch Option NOTE: Square Fire Pit Grates Require at least 3 Clearance All 4 Sides 24 Grate to 27 Grate to 30 Grate to Char-Guard Models Char Guard Option improves complete burn consistency, simplifies ash clean-up and allows you the choice of using charcoal. Char Guard is a heavy duty steel mesh fitted and welded to the underside of the grate. Approx. Weight of Grate: 45 lbs 56 lbs 66 lbs 72 lbs 79 lbs 89 lbs 33 Grate to 36 Grate to 38 Grate to Over 38 to $36 $42 $52 $67 $100 $100 $100 5 RETAIL PRICE LIST 6
Fire Pit Grates, Fire Rings, Covers and Accessories FIRE PIT COVERS and SNUFFERS DOME COVER 42 Diameter and 12 High Dome Fire Pit Cover helps snuff out the fire in a shorter period of time and keeps debris and rain out of your fire pit. ROUND or SQUARE FOLDING Fire Pit Cover NEW PRODUCT Turned Carbon Steel, 18 Gauge 42 Diameter Size covers fire pits up to 40 diameter 12 Dome Height for covering logs Edge Trim weather-resistant black finish on topside Custom Color Powder-Coat Upgrade Available DOME FIRE PIT COVER 42 Diameter CARBON STEEL $417 Custom Powder Coat Color Weight of dome covers - 45 lbs. each Welded Stainless Steel Handles Welded Top and Side Stainless Steel Handles 12 Height Call for Price and Colors FIRE PIT ACCESSORIES POKER 3/8 Dia. with HOOK-BACK Tip Weight of poker - 3 lbs. each FIRE PIT LINER - INSERT Stainless Steel Pokers (40 Long) Welded 304-Stainless steel rod, 3/8" diameter Vinyl foam handle (Closed Cell) Hook-back tip Custom Lengths Available STAINLESS STEEL POKER Hook Back Design 3/8 DIA. STAINLESS STEEL 40 LENGTH WITH CLOSED CELL VINYL HANDLE $40 POKER DIsplay Stand DISPLAY STAND Holds 10 Pokers Display ONLY $100 Purchase 10 Poker FREE Round and Square Pit Cover helps snuff out the fire in a shorter period of time and keeps debris and rain out of your fire pit. OCTAGONAL or ROUND Fire Pit Cover - Snuffer Lid #304 Stainless Steel, 18 Gauge 44 Diameter Size covers fire pits up to 42 diameter Edge Trim weather-resistant black finish on topside Octagonal Shape Stylish Octagonal Shape Resists High Winds! This Snuffer Lid helps put out the fire in a shorter period of time and not only keeps outside debris from getting into your fire pit...it keeps the unburned wood dry for the next time you build a fire. Round Covers fit up to 46 opening Octagonal / Round SNUFFER LID Galvanized Steel Plated with Black Finish FOLDING FIRE 44 x 44 Diameter 44 Square PIT COVER STAINLESS STEEL $417 $417 Weight of the square and round folding covers - 35 lbs. each 30 Dia. $157.00 (for 28 Opening) Welded Stainless Steel Handles Round Shape 18 Gauge Galvanized Metal Plated Finish electrostatically applied, weather-resistant black finish Welded stainless steel handle Edge Trim Sizes to fit 28 diameter, 34 diameter, 42 diameter and 46 diameter fire pit openings 36 Dia. $181.00 (for 34 Opening) Folds in Half for Easy Storage 42 Dia. $192.00 (for 40 Opening) 48 Dia. $214.00 (for 46 Opening) Heavy Gauge Steel Fire Ring protects Fire Pit bricks or blocks from direct heat. 11 Gauge Carbon Steel Ring Insert 30, 36 and 42 Diameter Sizes 14 Depth weather-resistant black outer finish TeePee FIRE GRATE 15-1/4 The TeePee Grate allows kindling or firewood to be leaned up against itself in a tepee shaped cone or pyramid. As the wood burns and falls into the middle it will create a "core of heat" of hot wood embers. Welded 5/8" carbon steel bar stock 17" Tall (Top to bottom) Larger Sizes are 3 pieces with six bolts; smaller sizes are 2 pieces with 4 bolts. ROUND FIRE RING 30 Diameter 36 Diameter 42 Diameter Fire Pit Insert Liner CARBON STEEL $340 $365 $390 17 Tall TEEPEE GRATE 5/8 Carbon Steel Approx. Weight of Grate: About 15 lbs $85 15 lbs Weight of the octagonal and round snuffer covers - 17 lbs. each 7 RETAIL PRICE LIST 8
Fully Vented Gas Log Fireplace Systems Log Styles Apply to ALL GAS LOG Models as noted in descriptions GAS LOG BURNERS ELITE TRIPLE BURNER with LOGS Raised Rear Log Support Rear Burner with Diverters Red Oak Logs (RO) Raised Rear Log Support Master Flame Elite Triple Burner with Logs The Elite Series is the preferred choice of those who want the fullest, most natural looking flame, and the only choice for those who want the luxury and esthetic appeal of a real wood fire. Optional conveniences like hi-lo flame modulation, remote controls and even electronic ignition give the owner the ultimate in comfort and mood control. Charred Slit Oak Logs (CSO) Ordering Gas Log Burner and Logs Aged Oak Logs (AO) Specify Natural Gas (NG) or Propane Gas (LP) for each model ordered. Be sure to specify log style Red Oak (RO), Charred Split Oak (CSO) or Aged Oak (AO) along with the burner size. Examples: #EL24-NG-AO, #EL21-LP-CSO, #EL36-NG-RO Cleanest, most realistic burn in the industry Straight port injection Sandless - Specifically designed diverters and baffles disperse gas to provide a livelier, more natural-looking fire. No sand maintenance required. One piece burner construction Separate logs - can be configured to the owner's preference (number of logs depends on system size) Choice of Log Style black finish Optional log accessory kit available to hide electronics, hook ups, etc. Optional: Specify Gas Control Valve Upgrade of installed gas valves). For Natural Gas ONLY Match Light VALVE (Manual) GAS SAFETY PILOT Hi to Lo Modulating with Remote Hi to Lo MANUAL MODULATING ELITE Burner Front Burner with Baffles 18 Burner (#EL18) Center Grate Tine Holds Scent Sticks 21 Burner (#EL21) 24 Burner (#EL24) Grate Facade Separates for Easy Installation 30 Burner (#EL30) 36 Burner (#EL36 MATCH LIT $540 $565 $600 $690 $1,200 Log Style Choice RO/CSO RO/CSO/AO RO/CSO/AO RO/CSO/AO RO Burner ONLY $460 $475 $500 $575 $1005 Weight of Burner: 35 lbs 40 lbs 45 lbs 50 lbs 55 lbs Weight of Logs: 35 lbs 47 lbs 58 lbs 92 lbs 100 lbs Ember Burner through Lower Pan ELITE BURNERS Complete (Factory Assembled & Tested): Burner and Control Valve/Upgrade, Log Set and Installation Kit INSTALLATION KIT includes Black Lava Rock, Glowing Embers, Vermiculite Ember Medium, Bendable Gas Line with Fittings and 10 Scent Sticks. MILLIVOLT READY UPGRADE: Factory Installed Gas Valve MANUAL VALVE MATCH LIGHT (NG ONLY) MANUAL VALVE SAFETY PILOT (NG or LP) $157 MANUAL MODULATING VALVE KIT* (NG or LP) $388 MILLIVOLT READY VALVE KIT* (NG or LP) $447 UPGRADE KIT ONLY - Dealer Conversions ELECTRONIC IGNITION With REMOTE Hi to Low MODULATING with REMOTE CONTROL $598 Hi to Low MODULATING REMOTE CONTROL and ELECTRONIC IGNITION* (NG or LP) $808 $93 $132 $275 $330 $450 $583 9 RETAIL PRICE LIST 10 Effective March 1, 2016 2017
Fully Vented Gas Log Fireplace Systems GAS LOG BURNERS OUTDOOR GAS LOGS and LOGSETS ELITE GEMINI SEE-THRU 5 BURNER With LOGS PREMIUM SINGLE BURNER with LOGS OUTDOOR 2 BURNER LOG KITS For Master Flame Gas Log Burners ELITE GEMINI BURNERS Complete (Factory Assembled & Tested): Burner and Control Valve/Upgrade, Log Set and Installation Kit Center Burner with Diverters Side Burners with Baffles The SEE THRU GEMINI Series features Master Flame s sandless, straight port injection providing the liveliest and most natural-looking flame and burn - noticeably superior to grate/burner/sand/pan log sets. Five Burners - Two Outside Burners, Center Burner and Twin Ember Burners (One on Each Side) black finish Choice of Log Style (see page 9-10). Optional Gas Control Valve Upgrade (see page 10) Get the flame and esthetic appeal of a real wood fire with the hand built Master Flame SAND BURNER Series Gas Log System. Separate steel grate allows optimum gas log placement for most efficient and natural looking flame. Available in 20,24 or 30 burner sizes. Welded steel pan and burner tube Durable welded steel grate for gas logs Natural Gas only - Match Lit ONLY Electrostaticly finished with high heat-resistant black paint Choice of Logset Style: Red Oak, Charred Split Oak or Aged Oak Grate (5/8 Bar Stock) 100% Stainless Steel Dual Burner Outdoor OUTDOOR DUAL Burners Log Style MATCH LIT (NG ONLY) #ODSS-18 CSO/RO $590 #ODSS-21 CSO/RO $636 #ODSS-24 CSO/RO $682 #ODSS-30 CSO/RO $773 Red Oak Log Sets Charred Split Oak Log Sets RED SIZE Logs Log Set in Set OAK #RO18 18 6 $170 #RO21 21 6 $185 #RO24 24 7 $200 #RO30 30 8 $245 CHARRED SPLIT OAK SIZE Log Set Logs in Set #CSO18 18 7* $170 #CSO21 21 7* $185 #CSO24 24 8* $245 #CSO30 30 9* $285 * Front log is 2-piece Ember Burner through Lower Pan (Both Sides) Specify NG or LP, Log Style and burner size. Examples: #ELG18-NG-RO, #ELG24-LP-CSO Optional Gas Control Valve UPGRADE (see page 5 for pricing; page 10 for pictures of installed gas valves). ELITE Gemini Burner MATCH LIT ONLY Log Style Choice 18 Burner (#ELG18) Center Grate Tine Holds Scent Sticks (Both Sides) 21 Burner (#ELG21) 24 Burner (#ELG24) 30 Burner (#ELG30) $750 $775 $800 $900 RO/CSO RO/CSO/AO RO/CSO/AO RO/CSO/AO Weight of Burner: 37 lbs 42 lbs 47 lbs 52 lbs Weight of Logs: 35 lbs 47 lbs 58 lbs 92 lbs Pan for Holding Mediums - Sand for Flame Pattern - Embers Match Lit Model Natural Gas Only Specify log style (see page one) and burner size. Example: #SB24-RO or #SB20-LP-AO Single Burner 20 Burner (#SB20) Burner Tube 24 Burner (#SB24) RH Set-up Shown 30 Burner (#SB30) MATCH LIT $445 $479 $572 Log Style Choice RO/CSO/AO RO/CSO/AO RO/CSO/AO Burner ONLY $280 $300 $350 OUTDOOR SEE-THRU 3 BURNER OUTDOOR TRIPLE Burners Log Style MATCH LIT (NG ONLY) #ODSSST-18 CSO/RO $682 #ODSSST-21 CSO/RO $727 #ODSSST-24 CSO/RO $773 #ODSSST-30 CSO/RO $909 100% Stainless Steel Triple Burner Outdoor Aged Oak Log Sets ACCESSORY KIT AGED OAK SIZE Log Set Logs in Set #AO21 21 6 $205 #AO24 24 7 $325 #AO30 30 9 $340 LOG ACCESSORY KIT Logs in Kit #LAK 4 $42 11 RETAIL PRICE LIST 12
Fully Vented Gas Fireplace Systems PREMIUM PAN BURNER ROYAL SERIES COAL EFFECT PAN BURNER FITS MOST Basket Designs Hi Lo Modulating MMV/HHR MERTIK GV34 - Hi Lo ROYAL SERIES Coal Effect Burner FIREPLACE GRATES Standard Welded Steel Grates Choice of 5/8" or 1/2 carbon steel bar stock or stainless steel bar stock Standard Fireplace Sizes 20, 24, 28 and 32 Width (Widest Part) 17 deep 4 legs for optimal air circulation (longer or shorter legs available for $10 UPCHARGE) Optional Char-Guard Ember Catch 12" Front X 6-3/4" Rear X 6" Deep Tray 14" Front X 8-3/4" Rear X 6" Deep Tray Burner supplied with dispersion medium (non-burning) 1/2 Bag of non-burning coal for Tray MODEL #B 401 12 NG 12 Burner - NG #B 401 12 LP 12 Coal - LP #B 401 14 NG 14 Burner - NG #B 401 14 LP 14 Burner - LP Hi to Lo Modulating with ACCUMEN REMOTE CONTROL WITH MMV-READY WITH MMV/HHR Hi to Lo Modulating with Electronic Ignition and REMOTE CONTROL WITH EIR $540 $680 $770 SAME PRICING FOR ALL MODELS! BURNER SUPPLIED WITH COAL (Non-Burning Synthetic) ACCESSORY DESCRIPTION #COAL B Bag of COAL (Non-Burning): Enough to Fill 14 Burner Tray $31.99 Fireplace GRATES 5/8 Bar Bar FIREPLACE 20 (6 24 (7 GRATE Bar/Tines) Bars/Tines) STANDARD SHAPE 5/8 CS $130 $138 5/8 SS $260 $320 1/2 CS $94 $104 1/2 SS $160 $172 FIREPLACE GRATE STANDARD SHAPE 28 (8 Bar/Tines) 32 (9 Bar/Tines) 5/8 CS $142 $148 5/8 SS $340 $380 1/2 CS $110 $120 1/2 SS $180 $200 CHAR-GUARD Ember Catch Option 28 Grate to 32 Grate to $30 $40 Master Flame Wood Burning Fireplace Accessories Customized Products Made to Specification RECTANGULAR FIREPLACE GRATES NEW PRODUCT FIRE PIT GRATE RECTANGULAR Up to 96 97 to 144 145-180 181 + per inch ADDER to 180 5/8 CARBON STEEL $154 $190 $300 $15 5/8 STAINLESS STEEL $480 $650 $740 $30 CHAR-GUARD Ember Catch Option CUSTOM PRODUCTS Welded Steel Products Made to Specification: Custom is referred to as any product not listed in the Aspen Industries, Inc. current price list. To quote a Custom Unit Order we will need a drawing with specifications. Aspen Industries Custom Order Department has manufactured many types of welded steel hearth, fireplace and fire pit product, including burners, fire grates, burner and grate systems, burner and pan system, fire and ice type burner / shallow pan, fireplace screens as well as unique fire pit screens with special handle and access locations. 24 Grate to Rectangular Fireplace Grate 27 Grate to 30 Grate to Rectangular Fireplace Grate with Char-Guard Ember Catch Over 38 to $36 $42 $65 $100 CUSTOM Burners CUSTOM Fire Pit Screens CUSTOM Fireplace Screens 13 RETAIL PRICE LIST 14
Welded Steel Products 2017 Catalog TERMS & CONDITIONS SCREEN & GRATE WARRANTY GAS LOG WARRANTY PAYMENT TERMS: 1% 10, NET 30 DAYS. Late charges 2% per month on payments beyond terms. FREIGHT: F.O.B. Bensenville, IL PRICE POLICY: All prices are subject to change without notice. Orders are subject to credit approval at time of placement. CREDIT CARDS: Aspen Industries, Inc. accepts Visa and Mastercard for Invoice payments (2% added to invoice). RETURNS: A Returned Goods Authorization (RGA) is required prior to return of material. There is a 20% restocking fee for all returned goods. Original Owner WARRANTY Aspen Industries, Inc. warranties its Fire Pit Safety Screens and Fire Grates, to the original owner, against breakage (except breakage due to mishandling and abuse) for 12 months from the date of consumer purchase. No warranty on paint normal weathering and some discoloration may occur depending upon materials burned. Original Owner WARRANTY Aspen Industries, Inc. warranties its Gas Burner Assemblies, to the original registered owner, against breakage (except breakage due to mishandling and abuse) for life. Warranty Registration is required. Shipping not included. Aspen Industries, Inc. warranties its factory installed pilot valves, controls, accessories and logset to its owner, against any performance defects for a period of 1 year from the date of consumer purchase. Authorized Dealers are listed on our website: www.masterflamegaslogs.com Aspen Industries Master Flame Products Bensenville, IL 60106 Voice: 630-238-0611 Toll Free: 800-642-7254 Fax: 630-238-9871 sales@masterflame1.com www.masterflamegaslogs.com Made in the USA