0.2mm Guaranteed Accuracy That s 1:15000 Guaranteed Cutting Straightness! Flip over sub bench parking provides full unobstructed bench surface 5 year guarantee Evolution E2 ACCURACY In 1999 the original Javelin Cutter Bar was produced using a specialist Laser system to calibrate the full length of the cutting track. This method of production, unique to Keencut, ensures that every Evolution, Javelin & Javelin Integra cutting system is factory guaranteed to cut straight to within 0.02 mm along the full length - perfect for creating a seamless appearance in displays and installations. FEATURES & PERFORMANCE Outstanding 1:15000 straightness accuracy guarantee making the E2 ideal for Pop-up banner displays Designed to fit onto any bench or the purpose built Keencut EB Bench Switchable cutting tracks for general purpose and textile cutting Replaceable integrated nylon cutting track and textile cutting wheel attachment (included) enable flag and other delicate materials to be cut cleanly and with great precision when a knife blade is not suitable Integral extruded alloy cutting base mounts to bench surface via a series of height adjustable brackets designed to optimise alignment & clamping Comes as standard with three different types of Blade Holders: Graphik Blade Holder (2) [VABHG], Medium Duty Blade Holder (1) [VABHML] and the Circular Knife Blade Holder (1) [VABHC] to provide maximum versatility and cutting options Reverse the Graphik Blades [CA50/032] (included) to set the machine to cut Left- Right, Right-Left or both Double tool cutting head accepts two blade holders at one time for quick change between cutting different materials, thicknesses or directions The new large diameter textile wheel improves performance and longevity When heat cutting and sealing is required the Keencut HotCut sliding head can be quickly attached with the appropriate electric Hot Knife and detached in seconds Patented space age bearing and slide system designed for operator adjustment and minimal maintenance Available in five practical sizes, from 1.6 to 3.6 metres Code Description Price EVO1.6M EVOLUTION-E2 1.6M (64 ) 616.85 EVO2.1M EVOLUTION-E2 2.1M (84 ) 691.25 EVO2.6M EVOLUTION-E2 2.6M (104 ) 770.85 EVO3.1M EVOLUTION-E2 3.1M (124 ) 869.75 EVO3.6M EVOLUTION-E2 3.6M (144 ) 971.25 EASE OF OPERATION & SAFETY Blade locking thumb screw adds safety & convenience Tools interchange quickly for maximum productivity Unique parking mechanism allows the cutter to be rotated to a safe position below the bench when not needed leaving the working surface free of obstructions for performing inspections and other procedures Integral lift and hold mechanism operates from either end enabling a single operator to load and align even the longest print jobs quickly and accurately Spring loaded blade holders immediately retract when not in use Multiple integral full length grip cords hold work safe and sure while cutting Circular knife supplied with blade guard to be engaged when not in use Unique four piece cutter slideway and torsion bar extrusion 250
INTERCHANGEABLE TOOLS Tools interchange quickly for maximum productivity Features: Blade locking thumb screw adds safety & convenience Both the Medium Duty Blade Holder and Graphik Blade Holder feature quick height adjustment sliders The Evolution E2 comes with 4 blade holders as standard: Graphik Blade Holder (x2) [VABHG] Medium Duty Blade Holder (x1) [VABHML] Circular Knife Blade Holder (x1) [VABHC] GRAPHIK BLADE HOLDER [VABHG] Sliding Blade Depth Adjuster - easily and quickly extend cutting depth up to 13mm or set different holders to different depths for ultra-quick changeover The Graphik Blade is reversible so the holders can be set up to have one cutting Left-Right and the other Right- Left Specially designed knife edge for extra stability in tougher materials Increased durability and reduced tip breakage Hard wearing & Oil-free 25 Graphik Blades included with each machine CA50/032 MEDIUM DUTY BLADE HOLDER [VABHML] Adjust to a blade depth of 10mm Each machine is supplied with a pack of 100 Medium Duty Utility Blades CA50/019 CIRCULAR BLADE HOLDER [VABHC] Cold cut textiles and other delicate materials Ideal for trimming thin strips off banners and posters where a knife blade would be too aggressive Comes fitted with red blade guard to be engaged when not in use for optimum safety VERTICAL CUTTING ACTION Double cutting head accepts two blade holders at one time. Ideal for 2-way cutting and versatility INTEGRAL, LINKED LIFT & HOLD Lift from either end to suspend complete cutter for easy loading and positioning of media enabling a single operation to load and align the longest print jobs quickly and accurately. SWITCHABLE CUTTING TRACKS Switch between cutting groove and cutting strip in seconds Use full-length cutting groove for general purpose applications when using knife blades Loosen hinge knobs and slide complete cutter back to use integrated cutting strip in conjunction with circular knife when cutting textiles and other delicate materials PROTECT AND CLAMP WORK Underside of cutter and base are fitted with soft silicon cord [SILYR] to both grip and protect printed media FULL LENGTH CUTTING TRACK FOR TEXTILES Fitted with an imbedded purple polymer cutting track [EVOTCS] to use with Circular Knife so no additional cutting mat required SWING DOWN UNDER-BENCH STORAGE Provides unobstructed work surface when cutter is not in use for maximum working convenience and space efficiency INTEGRAL EXTRUDED ALLOY CUTTING BASE Adjustable for flatness and straightness Multiple integral full length grip cords hold work safe and sure while cutting Mounts to most bench surfaces via a series of brackets that are designed to optimise alignment & clamping PAIR OF FLIP STOPS INCLUDED AS STANDARD Each Evolution E2 is supplied with a pair of Flip-Stops (Left & Right) Ideal for use when cutting dense, rigid board like PVC Foamboard Keeps material in place and improves clamping as material cannot move away from blade If not required, simply rotate the Flip- Stop away from the base of the cutter in a single, easy movement 251
HOT KNIFE HOLDER FOR HSGM CUTTER, MODEL HSG-0 Code Description Price HOT Hot knife HSGM 88.20 HOT KNIFE HOLDER FOR AZ CUTTER, MODEL TC20 Code Description Price HOTAZ Hot knife az 88.20 The new Hot Knife Holders provide hot knife users with a safe, quick and accurate means of cutting and sealing synthetic fabrics, belting, webbing and more Includes a spring loaded mounting block for easy mounting to the cutter s slideway A spring loaded trigger automatically activates the Hot Knife when depressed but instantly switches off once released Run on the Keencut patented space age bearing and slide system designed for operator adjustment and minimal maintenance Provides a safe and accurate alternative to using a Hot Knife free hand with a straight edge The Hot Knife cuts approximately 3mm (1/8 ) from the edge of the cutter bar, ensuring straight line cuts in the same location every time The hot knife is securely held in place whilst heating up, keeping the potentially dangerous hot blade at a distance ensuring maximum safety YELLOW SILICON GRIP CORD - ROUND Round Silicon Cord is used on a range of Keencut equipment to provide a surface that will both grip and protect sensitive work If silicon cord collects ink and other debris gripping capability can be compromised and replacement is recommended Pack size: 10m Product code Description Price SILYR Grip cord round 8.59 YELLOW SILICON GRIP CORD - T-SHAPED T-shaped Silicon Cord is used on a range of Keencut equipment to provide a surface that will both grip and protect sensitive work If silicon cord collects ink and other debris gripping capability can be compromised and replacement is recommended Pack size: 10m Product code Description Price SILYT 10m Grip cord t 8.59 REPLACEMENT CUTTING STRIP To be used in conjunction with the Vertical Action Circular Blade Holder when cutting textiles, delicate media, carpet, paper or thin strips of banner. Universal size Cut down to fit individual machine Reversible EVOTCS 2 x 4.6m strips 24.65 252
GRAPHIK BLADE HOLDER Adjust to a blade depth of 13mm Accepts Keencut Graphik Blades (CA50/032) designed specifically for the Signmaker and Digital Printer: Specially designed knife edge for extra stability in tougher materials Reversible so the holders can be set up to cut Left-Right or Right-Left Increased durability and reduced tip breakage Hard wearing Oil-free VABHG Graphic blade holder 26.01 CIRCULAR BLADE HOLDER Comes Complete with Circular Blade Replacement blade available- product code CIR45 Cold cut textiles and other delicate materials Ideal for trimming thin strips off banners and posters where a knife blade would be too aggressive Comes fitted with red blade guard to be engaged when not in use for optimum safety VABHC Circular blade holder 26.01 MEDIUM DUTY BLADE HOLDER Adjust to a blade depth of 10mm Use standard off-the-shelf utility blades (CA50/019) VABHML Medium duty blade holder 26.01 GRAPHIK BLADE KEENCUT GRAPHIK BLADE IS DESIGNED FOR THE SIGNMAKER AND DIGITAL PRINTER Special tip design to increase durability and reduce tip breakage Designed to be reversible - Left-Right or Right-Left cut direction Specially designed knife edge for extra stability in tougher materials Adjust to a blade depth of 13mm Double ground edge Hard wearing + Oil-free Pack 100 blades CA50/032 x 100 blades 20.66 REPLACEMENT CIRCULAR BLADES 45mm Circular Blade for use with the Rotary Blade Holder fitted to all Series 2 Cutter Bars Made from high grade Japanese Steel, the CIR45 is ideal for trimming thin strips off bannersand posters where a knife blade would be too aggressive Pack size: 10 blades CIR45 x 10 blades 47.94 MEDIUM DUTY UTILITY BLADE Double ground edge Reversible Pack of 100 CA50/019 x 100 blades 6.45 253
EVOLUTION E2 BENCH The new Evolution 2 Bench is designed to accommodate the Evolution-E2 to create a practical and versatile cutting installation in any workshop. Evolution 2 Bench features an aluminium base plate along the front edge which enables quick and easy fitting of the Evolution-E2 cutter bar. Unlike the original Evolution Bench there is no need to fit two worktops to the bench; once the Evolution-E2 is installed an 18mm worktop can be fitted using the included fixing brackets and the bench will then be ready to use (worktop not included). Designed using the Keencut PROTEUS system of leg and beam extrusions, the Evolution 2 Bench can be extended to provide greater work space or integrated with an existing Proteus workbench system. With a total depth of 133cm the Evolution 2 Bench provides ample layout space and the unique design of the Evolution-E2 allows it to be swung under the edge of the Evolution 2 Bench when not in use. Design & Construction: High tensile aerospace aluminium alloy construction High grade anodising for clean good looks and lifetime durability Unique joint locking system provides a secure and rigid work bench CODE Description PRICE EB160 Evolution E2 bench 1.6m 290.00 EB210 Evolution E2 bench 2.1m 389.00 EB260 Evolution E2 bench 2.6m 415.00 EB310 Evolution E2 bench 3.1m 443.00 EB360 Evolution E2 bench 3.6m 542.00 EB BENCH FRAME DIMENSIONS EB160 eb210 eb260 eb310 eb360 A cm (") 190 (76) 240 (96) 290 (116) 340 (136) 390 (156) B cm (") 133 (53) 133 (53) 133 (53) 133 (53) 133 (53) C cm (") 90 (36) 90 (36) 90 (36) 90 (36) 90 (36) Overall worktop thickness required: EB BENCH WORKTOP DIMENSIONS: (Worktop not supplied) EB160 EB210 EB260 EB310 EB360 Ai (One Piece Worktop) : cm (") 194 (76.375) 244(96) 294 (115.75) 344 (135.5) 394 (155) Aii (Two Piece Worktop) : cm (") n/a 122 (48) 147 (58) 172 (67.75) 197 (77.50) B (Width) : cm (") 120 (47.25) 120 (47.25) 120 (47.25) 120 (47.25) 120 (47.25) Note: 120cm (47.25 ) wide gives a 7.5cm (3 ) overhang at the back of the bench 254
OUTSTANDING FEATURES PRODUCED USING THE KEENCUT PROTEUS FRAMEWORK SYSTEM Strong compatible leg & beam extrusions Unique assembly technique provides a secure and rigid work bench Designed for ease of assembly Concealed internal fixings Fully customisable High grade anodising for clean good looks and lifetime durability Assembly tools included UNIQUE JOINT LOCKING SYSTEM When tightened the conical fixing screws create their own recess in the twin web of the leg or beam for double safety under heavy load Strong leg and beam extrusions allow for many different configurations in size and shape Internal locking brackets enhance the smooth appearance and allow for solid panels to be fitted without obstruction Made from high tensile aerospace aluminium alloy WORK-TOP FIXING BRACKETS Create the ideal bench surface using a variety of worktop fixings (worktop not included) Any bench or table unit can be fitted with a glass top; requires the optional white silicone cord and four extra end caps EXTENSION KITS OPTIONAL Available for all sizes of Evolution Bench Two depths: Extend bench depth 71cm (28 ) using the Small Extension Kit Extend bench depth 129cm (52 ) using the Large Extension Kit ADJUSTABLE FEET Included with all Keencut benches Adjustable for precise bench levelling on uneven floors Maintain flatness to obtain maximum, uncompromised accuracy INTEGRAL ALUMINIUM BASE The EB Bench comes complete with framework and aluminium base for quick and easy mounting of the Evolution E2 255