BROEN UNIFLEX FITTINGS FOR WATER LAB
TABLE OF CONTENTS Content Page Table of Content 2 BROEN UniFlex TM 4 Product Overview 5 Water Fittings Bench Mounted Fitting with Swivel Spout... 6 Single Handle Mixer Bench Mounted...16 Bench Fitting Mounted on a Column... 7 Two Valve Bench Mounted Fitting on a U-Shaped Column... 8 Two Valve Bench Mounted Fitting on a Tee-shaped Column... 9 Bench Mounted Fitting on a Column with Swivel Spout...10 Three Valve Bench Mounted Fitting...11 Wall Mounted Fitting...12 Two Handle Bench Mounted One Hole Mixer with Swivel Spout...13 Suspended 2-Valve Fitting...14 Single Handle Mixer Bench Mounted with Hand Shower...17 One Handle Two Hole Mixer with Swivel Spout...18 One Handle Mixer with Swivel Spout...19 Bench or Wall Mounted 2-Hole Mixer...20 Wall Fitting with Lead-in...21 Wall Fitting...22 Fitting for Suspended or Wall Mounting...23 Fitting for Suspended or Wall Mounting with Lead-in...24 BROEN UniFlex TM Hoses for Water 25 Ordering Information BROEN UniFlex TM Fittings...26 BROEN UniFlex TM Hoses for Water 27 Headwork Metal Handle...28 Wrist Action Lever 29 Accessories / Spare Parts 30-2- WWW.BROEN.COM
WWW.BROEN.COM -3-
BROEN UNIFLEX TM THIS IS BROEN UNIFLEX BROEN UniFlex TM line offers a very high quality and durability combined with the complete program, which adds up to low LCC (Life Cycle Costs). Our line takes the standards in the market to a higher level. BROEN OFFERS CUSTOMER BENEFITS Safe and Simple Installation Complete Range One Stop Shopping Just-In-Time Deliveries One Valve More Connections Approved as a Complete System Fewer Connection Points Mix & Match - Build your Own Configuration Uniform Design / Dimensions Customization to Meet Customer Needs Double Sealing 100 % Testing BROEN POLYCOAT Powder Coating MORE EFFICIENCY MORE PLUG & PLAY MORE CUSTOM-MADE MORE QUALITY BROEN UniFlex TM fittings for water are designed for laboratory use. The operation and the configuration of the fittings are highly adapted to the requirements of a modern laboratory. The fittings are surface treated with BROEN POLYCOAT powder coating, which is highly resistant to most chemicals, UV fading and heat (for more information please refer to BROEN POLYCOAT brochure.) Most water fittings are as a standard delivered with a removable hose nozzle with a loose union nut which offers quick and effortless assembly and disassembly when a hose has been fixed to the nozzle. As an option it is possible to get water fittings with integrated check valve, which prevent backflow. BROEN UniFlex TM fittings for water incorporate a BALLOFIX ball valve (where relevant), which offers a number of advantages such as local shut-off (e.g. in connection with product service) and pre-setting for experimental purposes. THIS IS BROEN UNIFLEX BROEN UniFlex TM is a unique and patented connection, which allows customers to choose from various connection methods, such as hoses, Cu, PEX of Stainless Steel pipes, without changing the valve itself. It provides unique flexibility, not only for the installer, but also for the end-user. Due to the flexibility of the system, the quick installation and savings on fittings, this system offers lower TIC (Total Installed Costs). -4- WWW.BROEN.COM
PRODUCT OVERVIEW Aerator, antisplash nozzle Check valve (optional) UniFlex TM female UniFlex TM male Ceramic headwork BALLOFIX M30 x 1.5 x 60mm Metal handle Removable metal nozzle Fixed metal nozzle BROEN UNIFLEX TM HOSES UniFlex TM male Wrist action lever G1/2 x 60mm UniFlex TM female Standard length 700mm OD 10mm OD 15mm G3/8 G1/2 WWW.BROEN.COM -5-
BENCH MOUNTED FITTING WITH SWIVEL SPOUT S SPECIFICATIONS With metal handle With wrist action lever 180mm M30x1.5 700mm hose with OD 10mm inlet connection Model: Metal handle 300mm 60mm The fitting is delivered with an integrated BALLOFIX ball valve. Handle: Metal, BROEN POLYCOAT powder coated with media indication according to EN13792 Spout: Full swivel action Hose nozzle: Removable metal Headwork: Ceramic Opening/closing function: 180 (wrist action lever: 90 ) Temperature range: 0-90 C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 1.4 kg MATERIALS WITH MEDIA CONTACT Plastics: POM, PTFE, SPX (hose) Ceramics: Al 2 O 3 96% ORDERING INFORMATION For standard configuration please refer to the item numbers below. Other options: - aerator - fixed hose nozzle - integrated non-return valve - fixed spout - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot) Media S = 150mm S = 200mm S = 250mm S = 300mm Potable water, cold 2534 001 1001-52B 2534 002 1001-52B 2534 017 1001-52B 2534 016 1001-52B Non-potable water, cold 2534 001 1007-52B 2534 002 1007-52B 2534 017 1007-52B 2534 016 1007-52B Model: Wrist action lever Media S = 150mm S = 200mm S = 250mm S = 300mm Potable water, cold 2534 015 1001-52B 2534 018 1001-52B 2534 050 1001-52B 2534 051 1001-52B Non-potable water, cold 2534 015 1007-52B 2534 018 1007-52B 2534 050 1007-52B 2534 051 1007-52B -6- WWW.BROEN.COM
BENCH FITTING MOUNTED ON A COLUMN S SPECIFICATIONS With metal handle With wrist action lever 220mm M30x1.5 700mm hose with OD 10mm inlet connection Model: Metal handle 300mm 60mm The fitting is delivered with an integrated BALLOFIX ball valve. Handle: Metal, BROEN POLYCOAT powder coated with media indication according to EN13792 Hose nozzle: Removable metal Headwork: Ceramic Opening/closing function: 180 (wrist action lever: 90 ) Temperature range: 0-90 C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 1.5 kg MATERIALS WITH MEDIA CONTACT Plastics: POM, SPX (hose) Ceramics: Al 2 O 3 96% ORDERING INFORMATION For standard configuration please refer to the item numbers below. Other options: - aerator - fixed hose nozzle - integrated non-return valve - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot) Media S = 150mm S = 200mm Potable water, cold 2533 062 1001-52B 2533 024 1001-52B Non-potable water, cold 2533 062 1007-52B 2533 024 1007-52B Model: Wrist action lever Media S = 150mm S = 200mm Potable water, cold 2533 067 1001-52B 2533 025 1001-52B Non-potable water, cold 2533 067 1007-52B 2533 025 1007-52B WWW.BROEN.COM -7-
TWO VALVE BENCH MOUNTED FITTING ON A U-SHAPED COLUMN S SPECIFICATIONS The fitting is delivered with an integrated BALLOFIX ball valve. Handle: Metal, BROEN POLYCOAT powder coated with media indication according to EN13792 With metal handles 150mm 300mm Hose nozzle: Removable metal Headwork: Ceramic Opening/closing function: 180 (wrist action lever: 90 ) Temperature range: 0-90 C 220mm Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 2.5 kg With wrist action levers M30x1.5 Model: Metal handle 700mm hose with OD 10mm inlet connection 60mm MATERIALS WITH MEDIA CONTACT Plastics: POM, SPX (hose) Ceramics: Al 2 O 3 96% ORDERING INFORMATION For standard configuration please refer to the item numbers below. Other options: - aerator - fixed hose nozzle - integrated non-return valve - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals Media S = 150mm S = 200mm Potable water, cold 2533 068 1001-52B 2533 070 1001-52B Non-potable water, cold 2533 068 1007-52B 2533 070 1007-52B Model: Wrist action lever Media S = 150mm S = 200mm Potable water, cold 2533 069 1001-52B 2533 071 1001-52B Non-potable water, cold 2533 069 1007-52B 2533 071 1007-52B -8- WWW.BROEN.COM
TWO VALVE BENCH MOUNTED FITTING ON A TEE-SHAPED COMLUMN S SPECIFICATIONS The fitting is delivered with an integrated BALLOFIX ball valve. Handle: Metal, BROEN POLYCOAT powder coated with media indication according to EN13792 Hose nozzle: Removable metal With metal handles 220mm 300mm 60mm Headwork: Ceramic Opening/closing function: 180 (wrist action lever: 90 ) Temperature range: 0-90 C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 2.3 kg MATERIALS WITH MEDIA CONTACT With wrist action levers M30x1.5 700mm hose with OD 10mm inlet connection Model: Metal handle Plastics: POM, SPX (hose) Ceramics: Al 2 O 3 96% ORDERING INFORMATION For standard configuration please refer to the item numbers below. Other options: - aerator - fixed hose nozzle - integrated non-return valve - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals Media S = 300mm S = 400mm Potable water, cold 2533 072 1001-52B 2533 074 1001-52B Non-potable water, cold 2533 072 1007-52B 2533 074 1007-52B Model: Wrist action lever Media S = 300mm S = 400mm Potable water, cold 2533 073 1001-52B 2533 075 1001-52B Non-potable water, cold 2533 073 1007-52B 2533 075 1007-52B WWW.BROEN.COM -9-
BENCH MOUNTED FITTING ON A COLUMN WITH SWIVEL SPOUT S T = 150mm SPECIFICATIONS The fitting is delivered with an integrated BALLOFIX ball valve. U-shape with metal handle 290mm S-shape with metal handle Model: Metal handle S 200mm 300mm M30x1.5 700mm hose with OD 10mm inlet connection 110mm 300mm 60mm 410mm 60mm U-shape Handle: Metal, BROEN POLYCOAT powder coated with media indication according to EN13792 Spout: Full swivel action Hose nozzle: Removable metal Headwork: Ceramic Opening/closing function: 180 (wrist action lever: 90 ) Temperature range: 0-90 C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 2 kg MATERIALS WITH MEDIA CONTACT Plastics: POM, PTFE, SPX (hose) Ceramics: Al 2 O 3 96% ORDERING INFORMATION For standard configuration please refer to the item numbers below. Other options: - aerator - fixed hose nozzle - S-shaped spout with wrist action lever - integrated non-return valve - U-shaped spout, T = 200mm - S-shaped spout, S = 250mm + 300mm - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot) Media S = 150mm S = 200mm Potable water, cold 2533 076 1001-52B 2533 077 1001-52B Non-potable water, cold 2533 076 1007-52B 2533 077 1007-52B Model: Metal handle S-shape Media S = 150mm S = 200mm Potable water, cold 2533 127 1001-52B 2533 140 1001-52B Non-potable water, cold 2533 127 1007-52B 2533 140 1007-52B -10- WWW.BROEN.COM
190mm 110mm THREE VALVE BENCH MOUNTED FITTING 150mm SPECIFICATIONS With metal handles 380mm With wrist action levers 150mm 150mm M30x1.5 700mm hose with OD 10mm inlet connection Model: Metal handle 500mm 60mm The fitting is delivered with an integrated BALLOFIX ball valve. Handle: Metal, BROEN POLYCOAT powder coated with media indication according to EN13792 Spout: Full swivel action Hose nozzle: Removable metal Headwork: Ceramic Opening/closing function: 180 (wrist action lever: 90 ) Temperature range: 0-90 C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 3 kg MATERIALS WITH MEDIA CONTACT Plastics: POM, PTFE, SPX (hose) Ceramics: Al 2 O 3 96% Solder: DIN L-Ag55:Sn ORDERING INFORMATION For standard configuration please refer to the item numbers below. Other options: - aerator - fixed hose nozzle - integrated non-return valve - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals Media S = 150mm Potable water, cold 2533 078 1001-52B Non-potable water, cold 2533 078 1007-52B Model: Wrist action lever Media S = 150mm Potable water, cold 2533 079 1001-52B Non-potable water, cold 2533 079 1007-52B WWW.BROEN.COM -11-
80mm WALL MOUNTED FITTING With metal handle S 60mm G1/2 BROEN UniFlex 700mm hose with OD 10mm inlet connection SPECIFICATIONS The fitting is delivered with an integrated BALLOFIX ball valve. Handle: Metal, BROEN POLYCOAT powder coated with media indication according to EN13792 Hose nozzle: Removable metal Headwork: Ceramic Opening/closing function: 180 (wrist action lever: 90 ) Temperature range: 0-90 C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 2.3 kg With wrist action lever Model: Metal handle MATERIALS WITH MEDIA CONTACT Plastics: POM, SPX (hose) Ceramics: Al 2 O 3 96% ORDERING INFORMATION For standard configuration please refer to the item numbers below. Other options: - aerator - fixed hose nozzle - integrated non-return valve - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot) Media S = 150mm S = 200mm Potable water, cold 2533 080 1001-14B 2533 082 1001-14B Non-potable water, cold 2533 080 1007-14B 2533 082 1007-14B Model: Wrist action lever Media S = 150mm S = 200mm Potable water, cold 2533 081 1001-14B 2533 0831 001-14B Non-potable water, cold 2533 081 1007-14B 2533 083 1007-14B -12- WWW.BROEN.COM
TWO HANDLE BENCH MOUNTED ONE HOLE MIXER WITH SWIVEL SPOUT S SPECIFICATIONS With metal handles M30x1.5 With wrist action levers 180mm 2x700mm hoses with OD 10mm inlet connection Model: Metal handle 300mm 60mm Handle: Metal, BROEN POLYCOAT powder coated with media indication according to EN13792 Spout: Full swivel action Hose nozzle: Removable metal Headwork: Ceramic Opening/closing function: 180 (wrist action lever: 90 ) Temperature range: 0-90 C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 1.8 kg MATERIALS WITH MEDIA CONTACT Plastics: POM, PTFE, SPX (hose) Ceramics: Al 2 O 3 96% ORDERING INFORMATION For standard configuration please refer to the item numbers below. Other options: - aerator - fixed hose nozzle - integrated non-return valve - fixed spout - alternative hose inlet connection / without a hose - OD 10mm Cu pipes - other inlet options - national approvals Media S = 150mm S = 200mm S = 250mm S = 300mm WPH Potable water, cold/hot 2536 001 1039-52B 2536 002 1039-52B 2536 013 1039-52B 2536 012 1039-52B WNH Non-potable water, cold/hot 2536 001 1040-52B 2536 002 1040-52B 2536 013 1040-52B 2536 012 1040-52B Model: Wrist action lever Media S = 150mm S = 200mm S = 250mm S = 300mm WPH Potable water, cold/hot 2536 028 1039-52B 2536 014 1039-52B 2536 037 1039-52B 2536 040 1039-52B WNH Non-potable water, cold/hot 2536 028 1040-52B 2536 014 1040-52B 2536 037 1040-52B 2536 040 1040-52B WWW.BROEN.COM -13-
SUSPENDED 2-VALVE FITTING SPECIFICATIONS 700mm hose with OD 10mm inlet connection The fitting is delivered with an integrated BALLOFIX ball valve. Handle: Metal, BROEN POLYCOAT powder coated with media indication according to EN13792 Hose nozzle: Removable metal Headwork: Ceramic Opening/closing function: 180 Temperature range: 0-90 C 60mm Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 2.5 kg MATERIALS WITH MEDIA CONTACT 60mm 79mm 66mm 126mm Plastics: POM, SPX (hose) Ceramics: Al 2 O 3 96% ORDERING INFORMATION For standard configuration please refer to the item numbers below. Other options: - aerator - fixed hose nozzle - elbow levers - models with single valve, 2 valves 90 and 4 valves - alternative hose inlet connection / without a hose - other inlet options (type, length) - national approvals Media 2 valves 180 Potable water, cold 2530 047 1001-52B Non-potable water, cold 2530 047 1007-52B -14- WWW.BROEN.COM
W W W. B R O E N. C O M -15-
SINGLE HANDLE MIXER BENCH MOUNTED H S SPECIFICATIONS Handle: Metal, BROEN POLYCOAT powder coated Spout: Swivel action Hose nozzle: Aerator Cartridge: Ceramic (temperature and flow regulation type) Opening/closing function: 25, mixing function: ±45 Temperature range: 0 C - 90 C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 2.4 kg MATERIALS WITH MEDIA CONTACT 60mm 290mm M32x1.5 Plastics: POM, PTFE, SPX (hose) Ceramics: Al 2 O 3 96% ORDERING INFORMATION For standard configuration please refer to the item numbers below. Other options: - removable hose nozzle MOUNTING INFORMATION Drill Ø34mm for the mixer OD 10mm Media H = 300mm, S = 200mm H = 360mm, S = 180mm Short Handle 15 304.459 15 304.009-16- WWW.BROEN.COM
SINGLE HANDLE MIXER BENCH MOUNTED WITH HAND SHOWER H S SPECIFICATIONS Handle: Metal, BROEN POLYCOAT powder coated Spout: Swivel action Hose nozzle: Aerator Cartridge: Ceramic (temperature and flow regulation type) Opening/closing function: 25, mixing function: ±45 Temperature range: 0 C - 90 C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Weight: 3.0 kg MATERIALS WITH MEDIA CONTACT 60mm 290mm G 1/2 A for hand shower M32x1.5 OD 10mm M28x1.5 170mm Plastics: POM, PTFE, SPX (hose), ABS Ceramics: Al 2 O 3 96% ORDERING INFORMATION For standard configuration please refer to the item numbers below. Other options: - removable hose nozzle MOUNTING INFORMATION Drill Ø34mm for the mixer Drill Ø30mm for the hand shower Media H = 300mm, S = 200mm H = 360mm, S = 180mm Short Handle 15 305.459 15 305.009 WWW.BROEN.COM -17-
ONE HANDLE TWO HOLE MIXER WITH SWIVEL SPOUT 218mm SPECIFICATIONS Handle: Metal, BROEN POLYCOAT powder coated Spout: Swivel action 150mm Hose nozzle: Aerator With long handle Cartridge: Ceramic (temperature and flow regulation type) Opening/closing function: 25, mixing function: ±45 Temperature range: 0 C - 90 C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure Inlets: Eccentric couplings with male G1/2 S Weight: 1.5 kg MATERIALS WITH MEDIA CONTACT With short handle 78mm Plastics: POM, PTFE, SPX (hose) Ceramics: Al 2 O 3 96% ORDERING INFORMATION For standard configuration please refer to the item numbers below. Other options: - removable hose nozzle - bench mounted model - different inlet connections (with BROEN UniFlex TM rear wall connection, lead-in. etc) Media: Model S = 200mm S = 250mm S = 300mm Short Handle 2535 010 1035 2535 004 1035 2535 016 1035 Long Handle 2535 007 1035 2535 001 1035 2535 013 1035-18- WWW.BROEN.COM
ONE HANDLE MIXER WITH SWIVEL SPOUT 218mm SPECIFICATIONS With long handle Handle: Metal, BROEN POLYCOAT powder coated Spout: Full swivel action (110 limited swivel or no swivel as an option, should be mentioned when ordering) Hose nozzle: Removable plastic (aerator included) Cartridge: Ceramic (temperature and flow regulation type) 200mm 385mm Opening/closing function: 25, mixing function: ±45 Temperature range: 0 C - 65 C Max. working pressure: 10 bar / 147 psi Weight: 2.8 kg 230mm With short handle M28x1.5 2x900mm hoses with OD 10mm inlet connection 120mm 60mm MATERIALS WITH MEDIA CONTACT Plastics: PP, POM, PTFE, SPX (hose) Ceramics: Al 2 O 3 96% ORDERING INFORMATION For standard configuration please refer to the item numbers below. Media: Model S = 200mm Short Handle G350328135 Long Handle G350318135 WWW.BROEN.COM -19-
BENCH OR WALL MOUNTED 2-HOLE MIXER BOSS 250 mm No. 15 264.009 Bench or wall mounted two hole mixer with built-in BALLOFIX shut-off valves, ceramic headworks, swivel spout and detachable nozzle. The mixer is fixed as either a bench or wall mounted model by loosening the union nut between the valve housing and the 45 BALLOFIX. The inlets are adjusted to the required position upon which the union nut is retightened. 200 mm standout. 157 mm No. 15 268.009 Like above but with aerator. 200 mm standout. 200 mm Delivered with mounting accessories. 152 mm 60 mm Materials with medium contact: (aerator: nickel) Plastics: POM Ceramics: Al-oxyd 96% Glue: Loctite Weight: 2.3 kg Maximum working pressure: 10 bar/147 psi G 1/2 A The fittings are surface treated with BROEN POLYCOAT powder coat, which is highly resistant to most chemicals, UV fading and heat. The fitting incorporates a BALLOFIX ball valve, which offers a number of advantages: 1. Local shut-off, e.g. in connection with product service. 2. Pre-setting for experimental purposes. 3. Water conservation. 4. Safety lock, preventing unintended opening of the fitting. Mounting information: Ø22 mm 17 mm Ø4.5 x 5 mm Drill Ø22 mm for the inlet. Drill Ø4.5 mm for the locking ring at a distance of 17 mm from the center of the Ø22 mm hole. The Ø4.5 mm hole must be at least 5 mm deep. -20- WWW.BROEN.COM
WALL FITTING WITH LEAD-IN BOSS G 1/2 A The fittings are surface treated with BROEN POLYCOAT powder coat, which is highly resistant to most chemicals, UV fading and heat. The fitting incorporates a BALLOFIX ball valve, which offers a number of advantages: 80 mm 60 mm No. 15 002.009 Wall fitting with built-in BALLOFIX shut-off valve, ceramic headwork and detachable nozzle. Delivered with mounting accessories. 70 mm 60 mm Materials with medium contact: Plastics: POM Ceramics: Al-oxyd 96% Glue: Loctite Weight: 0.9 kg Maximum working pressure: 10 bar/147 psi 1. Local shut-off, e.g. in connection with product service. 2. Pre-setting for experimental purposes. 3. Water conservation. 4. Safety lock, preventing unintended opening of the fitting. Mounting information: Ø22 mm 17 mm Ø4.5 x 5 mm Drill Ø22 mm for the inlet. Drill Ø4.5 mm for the locking ring at a distance of 17 mm from the center of the Ø22 mm hole. The Ø4.5 mm hole must be at least 5 mm deep. WWW.BROEN.COM -21-
WALL FITTING BOSS 80 mm No. 15 204.009 Wall fitting with built-in BALLOFIX shut-off valve, ceramic headwork and detachable nozzle. 55 mm 60 mm G 1/2 Materials with medium contact: Plastics: POM Ceramics: Al-oxyd 96% Weight: 0.6 kg Maximum working pressure: 10 bar/147 psi The fittings are surface treated with BROEN POLYCOAT powder coat, which is highly resistant to most chemicals, UV fading and heat. The fitting incorporates a BALLOFIX ball valve, which offers a number of advantages: 1. Local shut-off, e.g. in connection with product service. 2. Pre-setting for experimental purposes. 3. Water conservation. 4. Safety lock, preventing unintended opening of the fitting. -22- WWW.BROEN.COM
FITTING FOR SUSPENDED OR WALL MOUNTING BOSS 50 mm 83 mm No. 15 010.009 Fitting for suspended or wall mounting with built-in BALLOFIX shut-off valve, ceramic headwork and detachable nozzle. 75 mm G 3/8 Materials with medium contact: Plastics: POM Ceramics: Al-oxyd 96% Glue: Loctite Weight: 0.6 kg Maximum working pressure: 10 bar/147 psi The fittings are surface treated with BROEN POLYCOAT powder coat, which is highly resistant to most chemicals, UV fading and heat. The fitting incorporates a BALLOFIX ball valve, which offers a number of advantages: 1. Local shut-off, e.g. in connection with product service. 2. Pre-setting for experimental purposes. 3. Water conservation. 4. Safety lock, preventing unintended opening of the fitting. WWW.BROEN.COM -23-
FITTING FOR SUSPENDED OR WALL MOUNTING WITH LEAD-IN BOSS G 1/2 A The fittings are surface treated with BROEN POLYCOAT powder coat, which is highly resistant to most chemicals, UV fading and heat. The fitting incorporates a BALLOFIX ball valve, which offers a number of advantages: 60 mm 62 mm 83 mm No. 15 340.009 Fitting for suspended or wall mounting with built-in BALLOFIX shut-off valve, ceramic headwork and detachable nozzle. Delivered with mounting accessories. 75 mm Materials with medium contact: Plastics: POM Ceramics: Al-oxyd 96% Glue: Loctite Weight: 0.6 kg Maximum working pressure: 10 bar/147 psi 1. Local shut-off, e.g. in connection with product service. 2. Pre-setting for experimental purposes. 3. Water conservation. 4. Safety lock, preventing unintended opening of the fitting. Mounting information: Ø22 mm 17 mm Ø4.5 x 5 mm Drill Ø22 mm for the inlet. Drill Ø4.5 mm for the locking ring at a distance of 17 mm from the center of the Ø22 mm hole. The Ø4.5 mm hole must be at least 5 mm deep. -24- WWW.BROEN.COM
BROEN UNIFLEX TM HOSES FOR WATER BROEN UniFlex TM flexible hoses BROEN LAB offers BROEN UniFlex TM hoses as an easy way to make the installation in the laboratory where safety and efficiency are required. BROEN UniFlex TM hoses are the ideal solution where there is a higher requirement for flexibility. Installation with flexible hoses saves you time and labor - in other words reduced installation costs. A wide range of fittings and lengths available for BROEN UniFlex TM hoses enables customers to choose the perfect hose for their application. BROEN UniFlex TM hoses for water are manufactured of soft cross-linked polyethylene (SPX), which is approved for use with drinking water and meets all hygienic requirements. From the outside the hose is secured by a Stainless Steel braiding that ensures long service life and durability. If you still prefer a standard way of installation with Cu, Stainless Steel, or PEX-pipes, BROEN LAB offers a wide range of connection fittings and adaptors for pipes of different dimensions. For more information, please contact your local BROEN LAB representative, or refer to www.broen.com. BROEN UniFlex TM connection fittings and adaptors for Cu, Stainless Steel and PEX pipes WWW.BROEN.COM -25-
ORDERING INFORMATION BROEN UNIFLEX TM FITTINGS Generally, item number for BROEN UniFlex fittings has the following structure: 25 XX XXX 10 XX - XX X BROEN LAB Series no. Models 30 - Angle valves 32 - Straight valves 33 - Valves on a column 34 - One handle water fittings 35 - One handle mixers 36 Two handle mixers Serial number *Country code 10 - International 30 - Japan 80 - Denmark 81 - Germany 82 - UK 83 - Benelux 84 - Australia Media code Hose type blank - none B - 0.7m with OD10mm C - Cu pipes (Mixer 2536 only) D - 0.7m with G3/8 union nut E - 0.7m with G1/2 union nut H - 0.7m with OD15mm Inlet type 05-30mm, G1/2-BROEN UniFlex TM 14-60mm, G1/2-BROEN UniFlex TM 18-90mm, G1/2-BROEN UniFlex TM 50-30mm, M30x1.5 52-60mm, M30x1.5 54-90mm, M30x1.5 01 - Water potable, cold () WPH 02 - Water potable, hot (WPH) 07 - Water non-potable, cold () WNH 08 - Water non-potable, hot (WNH) 35 - Tempered water (one handle mixer) WPH 39 - Water potable ( /WPH) WNH 40 - Water non-potable ( /WNH) * For water some national standards may apply, therefore contact your BROEN LAB representative for more information. -26- WWW.BROEN.COM
ORDERING INFORMATION BROEN UNIFLEX TM HOSES FOR WATER INLET CONNECTIONS 93 V XX XX XXXX OUTLET CONNECTIONS 93 V XX XX XXXX HOSE 93 V XX XX XXXX 3/8 fixed connection (Code 32) Straight BROEN UniFlex connection with EPDM o-ring (Code 20) SPX hose with braiding in stainless steel 1/2 fixed connection (Code 31) 45 BROEN UniFlex connection with EPDM o-ring (Code 25) * Marking for water with Part no. and Media indication 3/4 fixed connection (Code 33) * HOSE LENGTHS 3/8 union connection (Code 41) 90 BROEN UniFlex connection with EPDM o-ring (Code 30) Definition of length (L) 1/2 union connection (Code 40) 3/4 union connection (Code 42) OD10mm connection (Code 10) OD12mm connection (Code 12) OD15mm connection (Code 15) M10x1mm short connection with EPDM o-ring (Code 51) PLEASE NOTE: M10 connections can only be used to mixer and multimedia fittings *All O-rings are lubricated with silicone based lubricant * * Definition of length (L) If an 45 and 90 elbow occur on the same hose, it will as default be mounted in U-form Standard lengths of hoses (L): 0500 = 500mm 0700 = 700mm 1000 = 1000mm 1200 = 1200mm 1500 = 1500mm 2000 = 2000mm 2500 = 2500mm 3000 = 3000mm Straight BROEN UniFlex TM connection with EPDM o-ring (Code 20) Length tolerance of hoses: L = 400mm (- 0, +10mm) L = 401mm to 1000mm (- 0, + 20mm) L = >1000mm (- 0, + 30mm) 45 BROEN UniFlex TM connection with EPDM o-ring (Code 25) 90 BROEN UniFlex TM connection with EPDM o-ring (Code 30) SPECIFICATIONS Inner hose material: SPX (soft PEX) Braiding: Stainless steel with one green stripe Hose materials with media contact:pex, brass, EPDM and silicone based lubricant Inside diameter: 8.2mm Outside diameter: 12mm Max. working pressure: 10 bar Max. working temperature: 90 C Max. bending radius (inner): 40mm Min. length with connections: 160mm EXAMPLE OF HOSE CONFIGURATION 1200mm hose with OD 12mm inlet connection and straight UniFlex TM outlet connection 93V12201200 WWW.BROEN.COM -27-
HEADWORK METAL HANDLE ORDERING INFORMATION 1. Media button (zone 1) 2. Screw 3. Plastic ring (zone 2) 4. Metal handle (zone 3) 5. Ceramic headwork Complete set with ceramic headwork, metal handle and media indication No. 19 850.009 1. Media button No. 1915710 () No. 1915711 (WPH) No. 1915744 (WNH) No. 1915745 () 2. Screw No. 97G0033 3. Plastic ring No. 1915704-4059 (yellow) No. 1915704-5168 (green) 4. Metal handle No. 1916701G-5168 (green) 5. Ceramic headwork No. 1976000 SPECIFICATIONS BROEN UniFlex TM water fittings with metal handles are delivered with ceramic headworks. Water fittings with ceramic headwork offer quick and precise adjustment and a long service life. Opening/closing function: 1 x 180 turn Media: Hot/cold water Temperature range: Maximum 90 C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure MATERIALS WITH MEDIA CONTACT Plastics: POM Ceramics: Al-oxyd 96% FLOW CHART kpa l/min bar -28- WWW.BROEN.COM
HEADWORK WRIST ACTION LEVER ORDERING INFORMATION 1. Media buttons (zone 1) 2. Screw 3. Plastic ring (zone 2) SPECIFICATIONS BROEN UniFlex TM water fittings based on ceramic headwork are available with wrist action lever. Opening/closing function: 90 turn Media: Hot/cold water Temperature range: Maximum 90 C Max. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure MATERIALS WITH MEDIA CONTACT 4. Wrist action lever (zone 3) Plastics: POM Complete set with ceramic headwork, metal handle and media indications and WPH: LEFT TURN CLOSING No. 19 164.289 1. Media buttons No. 1915710 () No. 1915711 (WPH) No. 1915744 (WNH) No. 1915745 () 2. Screw No. 97G0033 3. Plastic ring No. 1915705-4059 (yellow) No. 1915705-5168 (green) 5. Ceramic headwork RIGHT TURN CLOSING No. 19 164.299 3. Plastic ring No. 1915704-4059 (yellow) No. 1915704-5168 (green) Ceramics: Al-oxyd 96% FLOW CHART kpa l/min bar 4. Wrist action lever (zone 3) No. 1916433G-5168 (green) 5. Ceramic headwork No. 1976400 5. Ceramic headwork No. 1976500 WWW.BROEN.COM -29-
ACCESSORIES / SPARE PARTS Illustration Description BROEN item No. Adaptor for aerator 2539 005 1001 Aerator 2539 006 1001 Adaptor for removable metal nozzle 2539 007 1001 Removable metal nozzle 2539 008 1001 L Fixed metal nozzle 2539 009 1001 Mounting set for G1/2 connection 19141000 G1/2 inlet with female BROEN UniFlex TM connection (incl. O-ring) L=30mm L=60mm L=90mm 1550233V 1527454V 1550246V Mounting set for M30x1,5 connection 19190000 Threaded inlet pipe M30x1,5 L L=30mm 1919003 L=60mm 1919002 L=90mm 1919004 G1/2 Vacuum pump for water fitting 19198009 140mm 78mm -30- WWW.BROEN.COM
For further information about BROENs other products please refer to following brochures: t new h es pmen was fo velo s & ey e om t de w er B s. LAB cy sh o h es M PREMIU g en was Tel. +49 62 58 93 190 e-mail: info@broen.de Broen ValVes ltd. 092010UK BROEN BROEN Singapore Pte.Ltd. 17 Everton Road Singapore 089373 Tel. +65 6298 0662 Fax +65 6298 0468 e-mail: sales@broen.com.sg LAB www.ke-art.dk BB UK 011 022 s & ey e en.c oduc Head Office: BROEN LAB GROUP Skovvej 30 DK-5610 Assens Tel. +45 6471 2095 Fax +45 6471 2476 e-mail: lab@broen.com 7, Cleton Street Business Park, Cleton Street Tipton West Midlands DY4 7TR U.K. Tel. +44 121 522 4515 Fax e-mail: broenvalves@broen +44 121 522 4535.com ASIC Re w er.bro www st pr our extensive knowled ge allows us to continu ally develop and optimize our product s so that they meet customer needs and specifications. safety, functionality and quality are an integral part of product design and flexibility. our insight and understanding of working environments and safety in laboratories allow us to develop custom solutions for projects around the world. use us to plan your project so we can advise you on laboratory layout and design. Broen armaturen gmbh Industriestrasse 8 D - 64579 Gernsheim germany at io late r the Broen lab solution s are used by professi onal users in many kinds of laboratories, from the education and health sectors industry in general to. our products are already an integrat of many workplaces. ed part From fittings for purified water, nitrogen, vacuum and compre ssed air, to the control and regulation of pure gases in critical applications such as a gas chromatograph and spectrometry. y d li n e em er cy sh o Y GENC EMER OWER SH EMS SYST Broen lab develop s, manufactures and delivers complete fittings for professi onal laboratories. our know-how and our quality products ensure the precise flow of water, gases and air, from source to user. Hands Free water Fittings k e-art.d www.k gases RNiNg R BU Es FO ValV URN T/T lif TM Ex ifl UN ROEN g en bar n e em er s OU Tl ET Es an d kpa l va lv Re d li co NT RO LAB BROE N stabi LEt & stabi LiNE HANd s free wate R fittin Gs FR ON T site TM web Ex our UN ifl r to refe BR OE N orm BROE N stabi LEt & stabi LiNE HANd s free wate R fittin Gs ses se a gg in f T RIC DIST ING HEAT S & GA fore ied Liquefgases petrol Plea N in ses s al ING BuILD ROLS CONT BRoe Red n e m l in e erge show n ers cy wa s & e ye hes be ted spec d in n ed an ing test Test are re: tings essu st Pr All fit ch. 0 at n Te : 70 les disp desig sure nozz um 0 bar). Pres ed im at king Max kpa (1 er serr Wor tion 00 xed ID rubb n Fi ca 10 : ifi desig mm tions Spec. imumr). nnec m to 13 m ax Co M m let 60 m (7 ba Out for 8 k by kpa ble shan suita. BSP ng 1 2. tubi tion: s body nnec as t Co tion: Br Inle truc. Cons Nitrile s: Seal n ic OE Asse 71 0 5 64 ce: BR Offi DK-561 Fax +4 Head vej 30 2095 m Skov 5 6471 roen.co eim +4 @b rnsh Tel. bh ail: lab Gm 579 Ge E-m 64 uren mat e 8 D Ar N ss BROE striestra 0 Indu any 93 19 e et Germ 9 62 58 roen.d Stre +4 fo@b l. eton Te rk, Cl U.K. 4535 ail: in s Pa Ltd. E-m R 2 LVES Busines DY4 7T 121 52 4 N VA et ds BROE on Stre Midlan Fax +4 m t et 7, Cl n Wes 522 4515 roen.co Tipto 4 121 alves@b +4. oenv Tel. e.ltd 02 ail: br re Pt #10E-m re gapo esent gapo 98 0468 N Sin k Cr 62 Sin BROE kit Bato 8079) x +65 Fa.sg 65 10 Bu ire S( 0662 Sp.com The 5 6298 roen +6 les@b Tel. ail: sa m Ecom oen. w.br ww ING BuILD LAAL INST NS TIO su pres low H tec ting BUR a gg re. pressu to atm and FOR N in in g n tow VEs BUR 3 ic ospher Va l FOR od n fit m /t 100 URN VEs rc /tur su pres psi s gase ttle re bo of tion func out with re su pres king. wor max re in Pressu ou relation ing T /T Va l 700 ed be us can d air. se 1.5 x pres tion: stalla er in work bar 7 l, tura for na s OU Tl ET Es an d URN res: um maxim kpa l if l va lv T /T e curv flow TM co NT RO l if 1x10-2 6.9x10-2 ) = 4.6 bar (6.9x10 = 67x Ex FR ON T TM Ex = psi = 67 psi ample: 1 3 6.9x10-5 if l TM if l -5 1x10 1 1 UN Ex UN Pre bar EN UN ifl EN -4 = BR OE N BRO pes all ty l for ith w idea are livered ing kit, OEN de ount in its m BR d are s/m ed e gs fro s, an item lock ntly, th Fittin ratorie fixing g fully bo nt eque, which tin la ou ns fit of are the d. Co -to-m nally OEN easy ill keep installe tentio ages w m BR ith the n unin BSP whe that in w gs fro ion not turn s. dard tory e fittin actured sit an ra st po ak ill uf labo gw in le gs ar awith man odern fittin result er fittin ered m ld ese easy op deliv of a wou of th are y, sign, e arks rabilit tings allm ed de activ, du All fit s. ance reamlin and attr ad m re or th d st an y an -to-cle bilit easy psi th an on 14.5 versi. con 0 Pa ance ssure 1.45x1 BROEN stabilet & stabiline HANds free water fittings BRO EN B R O E x l UNiF/TURN T OR if l Es F V Val RNiNg BU ses ga ete mpl s co our liver and d air, d de -how s an s an ture Our know er, gase ufac s. wat, man torie flow of lops labora e ve is al ec any B de e pr sion in m s to EN LA profes sure th ers or r BRO al us sect part ts en gs fo sion health ed. oduc fittin ofes d grat en, user ity pr by pr ion an inte og ce to qual used ucat ready an ater, nitr of sour are n e ed from tions om th ts are al rified w gulatio raphy lu fr so re uc pu ries, LAB and romatog prod gs for l to EN ro ra ur l. O BRO of labo fittin e cont a gas ch om nera th s Fr as ge to nd s. r, ki in ce such d ai and stry kpla esse ications lop indu y wor pr deve and an com l appl of m ually needs al and ca um criti ntin er gr s in vacu. to co stom an inte gase etry ws us eet cu derare pure ectrom m allo ality t and un ries sp dge at they qu d le d to an an ow insigh bora e so th lity e kn ucts nctiona lity. Our ty in la ound th nsiv fe bi ar exte prod fu d sa flexi Our ize our Safety, ects you on an d oj ts an. se r pr optim cations design ronmen ns fo advi t vi tio ifi can solu we oduc spec ng en of pr worki custom oject so rt of p pa ur pr velo ding stan us to de plan yo sign. to de w allo. use us ut and ld yo wor tory la OUP ra B gr labo N la ns 2476 stabilet & stabiline BROEN x UNiFlE Ol contr FRONT valves s ET Tl U O and www.broen.com lab EMER GENC SHOW ER SYY STEM S Building installations Building Controls district Heating & gas lab emergency shower systems Can be downloaded at WWW.BROEN.COM W W W. B R O E N. C O M -31-
BROEN LAB develops, manufactures and delivers complete fittings for professional laboratories. Our know-how and our quality products ensure the precise flow of water, gases and air, from source to user. BROEN LAB solutions are used by professional users in many kinds of laboratories, from the education and health sectors to industry in general. Our products are already an integrated part of many workplaces. From fittings for purified water, nitrogen, vacuum and compressed air, to the control and regulation of pure gases in critical applications such as a gas chromatography and spectrometry. Our extensive knowledge allows us to continually develop and optimize our products so that they meet customer needs and specifications. Safety, functionality and quality are an integral part of product design and flexibility. Our insight and understanding of working environments and safety in laboratories allow us to develop custom solutions for projects around the world. Use us to plan your project so we can advise you on laboratory layout and design. Head Office: BROEN LAB GROUP Skovvej 30 DK-5610 Assens Tel. +45 6471 2095 Fax +45 6471 2476 E-mail: lab@broen.com BROEN Armaturen GmbH Industriestrasse 8 D - 64579 Gernsheim Germany Tel. +49 6258 9319-0 Fax +49 6258 51812 E-mail: info@broen.de BROEN VALVES Ltd. 7, Cleton Street Business Park, Cleton Street Tipton West Midlands DY4 7TR U.K. Tel. +44 121 522 4515 Fax +44 121 522 4535 E-mail: broenvalves@broen.com BROEN Singapore Pte. Ltd. 10 Bukit Batok Cresent #10-02 The Spire S(658079) Singapore Tel: +65 6298 0662 Fax: +65 6298 0468 Mobil: +65 9749 7471 E-mail: sales@broen.com.sg 032011UK 1. Edition www.ke-art.dk www.broen.com BUILDING INSTALLA- TIONS BUILDING CONTROLS DISTRICT HEATING & GAS LAB EMERGENCY SHOWER SYSTEMS