Fast cross-linking two-component silicone gel Mpgel plus is a two-component re-enterable silicon gel for insulated filling and sealing of casings and junction boxes ousing electrical up to 1 kv or electronic components, suitable for a range of applications due to its versatility. FST CROSS-LINKING Mpgel plus as an extremely sort crosslinking time, allowing rapid installation and reducing delays before start-up. 12 min easy and safe Te two components are supplied in separate containers to always ensure te correct 1:1 mixing ratio. Te measuring jug supplied wit te kit ensures accurate mixing and prevents waste. Mpgel plus can also be partially used, according to needs, and reused even after te pack as been open, providing maximum gain. Te gel in bags features te Perforation Pouring System (PPS), wic allows te operator to avoid contact wit te component wen opening te bag. Te nozzle as a serrated cylindrical end tat fits securing into a ring inside te bag and punctures its, allowing fluid and omogeneous casting of te gel witout accidental spills. 58 electrical tecnology
LOW VISCOSITY Its low viscosity enables Mpgel plus to be poured easily and also ensures fast and safe filling of containers and gaps. RE-ENTERLE ND REMOVLE Once cured, Mpgel plus can be easily removed witout need for tools, even after long periods of time. HIGH PERFORMNCE Hig dielectric strengt (25.5 kv/mm). Wide range of operating temperature (from -60 to 200 C). Its transparency allows te of te ousing or junction box to remain visible. Mpgel plus is also resistant to UV rays and so can also be used outdoors and exposed to te elements. SFE Mpgel plus is non-toxic, non-irritating, odourless and solvent-free, and is classified as a non-azardous product under Directives. PCKGING Mpgel plus is available in bags wit a removable partition, in bottles of various capacities and in canisters for efficient use, according to te amount of product required. Low viscosity Removable Re-enterable Eco-friendly Odourless Nonirritant Hig dielectric strengt Hig moisture protection FORMTS 7 available in formats bottles: 2 formats bags: 4 formats tanks: 1 format 0.3 L 1 L 0.17 L 0.24 L 0.42 L 0.6 L 10 L electrical tecnology 59
MPGEL PLUS GEL FILLERS Dielectric strengt: 25.5 kv/mm Very fast cross linking: Colour: ligt blue Non-azardous product under Directives CE for insulated filling and sealing - in bottles - Filling ousings and junction boxes boards and components Package - 2 separate transparent bottles - Measuring jug - No waste tanks to te separate bottles and measuring jug - Protection from te elements (rain, umidity) dust and te intrusion of - Good mecanical strengt - Reusable after opening 2 formats bottle FILLING CPCITY Ø x (mm) x x (mm) 65x35 80x40 100x100x50 120x80x50 150x110x70 MPGEL-0030 0.3 4 3 - - - MPGEL-100 1 14 10 2 2 1 60 electrical tecnology
Dielectric strengt: 25.5 kv/mm Very fast cross linking: Colour: ligt blue Non-azardous product under Directives CE for insulated filling and sealing - in bags LOW VOLTGE MPGEL PLUS GEL FILLERS - Filling of ousings and junction boxes boards and components - Recommended wen a limited amount of product is required Package - ag wit removable baffle - Perforated casting system (PCS) - No waste tanks to te PCS - Protection from te elements (rain, umidity) dust and te intrusion of - Good mecanical strengt bag f4 ormats FILLING CPCITY Ø x (mm) x x (mm) 65x35 80x40 100x100x50 120x80x50 MPGEL-170 0.170 2 1 MPGEL-240 0.240 3 2 MPGEL-420 0.420 6 4 1 1 MPGEL-600 600 8 6 1 1 electrical tecnology 61
MPGEL PLUS GEL FILLERS LOW VOLTGE Dielectric strengt: 25.5 kv/mm Very fast cross-linking: Colour: ligt blue Non-azardous product under Directives CE for insulated filling and sealing - in cans - Filling ousings and junction boxes boards and components - Recommended wen a large amount of product is required and/or for repeated use over time Contents - 2 separate cans - Measuring jug - No waste tanks to te separate canisters and measuring jug - Protection from te elements (rain, umidity) dust and te intrusion of - Good mecanical strengt - Reusable after opening FILLING CPCITY Ø x (mm) x x (mm) 65x35 80x40 100x100x50 120x80x50 150x110x70 190x140x70 240x190x90 MPGEL-1000 10 140 100 20 21 8 5 2 62 electrical tecnology