Beakers, Low Form PP, highly transparent Ideal for general laboratory use. With spout and exceptionally easy-to-read blue graduations. Good chemical resistance Resistant to heat up to 121 C (for 20 minutes), prolonged use 100 C Smooth surfaces for easy, fast cleaning ISO 7056 (ml) Division (ml) Ø Height Pk Cat. No. 25 5 31 47 12 213-1621 10,50 V 50 10 40 60 12 213-1622 11,10 V 100 20 49 70 12 213-1623 12,30 V 250 50 68 94 6 213-1624 8,90 V 400 50 77 109 1 213-1725 2,30 V 600 100 91 125 1 213-1726 2,30 V 1000 100 102 149 1 213-1642 3,40 V 2000 200 133 183 1 216-1643 6,00 V 3000 200 174 215 1 219-1644 11,80 V 5000 500 185 248 1 222-1645 15,60 V Beakers, Low Form PTFE, with spout Thick-walled, with reinforced lip and exceptionally smooth inner walls to prevent contamination. Non-stick. Low gas permeability. Temperature resistant from 200 to +280 C Flat bottom for good heat transfer, for example when used on regulated hotplates (ml) Ø Height Pk Cat. No. 5 20 26 1 213-0233 4,00 V 10 24 33 1 213-0234 5,50 V 25 32 47 1 213-0235 5,90 V 50 43 55 1 213-0236 7,20 V 100 54 68 1 213-0237 8,90 V 150 59 75 1 213-0238 10,80 V 250 66 97 1 213-0239 13,70 V 500 80 125 1 213-0240 22,40 V 600 90 125 1 213-0241 29,60 V 1000 100 155 1 213-0242 45,60 V 2000 125 210 1 213-0243 75,90 V 5000 170 280 1 213-0244 273,00 V Beaker Cups, Disposable PS Economical all-purpose beaker for an enormous range of uses. Suitable for use in various sample dispensers Beakers with capacity of 5 and 20 ml are recommended for use in flame photometric analyses (ml) Pk Cat. No. 5 1000 611-1363 22,90 V 10 1000 611-1364 23,00 V 20 500 611-1365 22,90 V 50 500 611-1366 34,40 V 150 100 611-1367 33,90 V 250 100 611-1368 33,70 V 800 100 611-1369 72,70 V 1000 100 611-1370 133,00 V
y Bottles, Narrow Mouth, with Screw Cap Excellent for sample collection, storing and transporting liquids. Leak-proof, tough and versatile Squeezable, make excellent containers as dropper or wash bottles Raised graduation (ml) Pk Cat. No. 50 10 215-5637 4,90 V 100 10 215-5638 5,10 V 250 10 215-5639 8,30 V 500 12 215-5640 16,30 V 1000 12 215-5641 28,40 V 2000 6 215-5642 20,60 V Replacement caps LDPE For narrow mouth and wide mouth bottles with thread. Size for Pk Cat. No. 18 50/100 ml 10 215-5643 1,40 V 25 250/500 ml 10 215-5644 1,70 V 28 1000/2000 ml 10 215-5645 1,90 V Bottles, Narrow Mouth, with Screw Cap LDPE, brown Perfect for sample collection, storage and transport. Coloured brown to protect light-sensitive liquids Leak-proof, tough and versatile Raised graduation (ml) Pk Cat. No. 50 10 215-5671 5,50 V 100 10 215-5672 6,70 V 250 10 215-5673 10,30 V 500 12 215-5674 19,40 V 1000 12 215-5675 34,30 V Drip Closures for Narrow Mouth Bottles Complete drip closure with holding strap and cap. Ordering Information: Can only be used with narrow mouth bottles 215-5637 to 215-5642. Description Drip Closures for bottles (ml) Thread O-Ø Pk Cat. No. 50+100 18 1 215-6306 0,30V 250+500 25 1 215-6307 0,40V 1000+2000 28 1 215-6308 0,30V
Spray Caps for Narrow Mouth Bottles Ordering Information: Can only be used with narrow mouth bottles 215-5638 to 215-5641. for Pk Cat. No. 100 ml 1 215-6312 0,80 V 250/500 ml 1 215-6313 0,90 V 1000 ml 1 215-6314 1,10 V Bottles, Wide Mouth, with Screw Cap Perfect for sample collection, storage and transport. Ideal for liquids, pastelike media and granular material. The wide mouth allows easy filling and cleaning. Without graduation. Good chemical resistance Leak-proof, tough and versatile Suitable for use in packaging and storing food (ml) Pk Cat. No. 50 10 215-5630 6,40 R 100 10 215-5631 7,70 R 250 10 215-5632 10,30 R 500 12 215-5633 18,80 R 1000 12 215-5634 32,10 R 1500 6 215-5635 20,40 R 2000 6 215-5636 23,50 R Spare closures, Size for Pk Cat. No. 32 50/100 ml 10 215-5646 2,10 V 40 250 ml 10 215-5647 2,50 V 50 500 ml 10 215-5648 4,00 V 65 1000/1500/2000 ml 10 215-5649 6,50 V Bottles, Wide Mouth, with Screw Cap PP, natural colour Perfect for sample collection, storage and transport. Ideal for liquids, pastelike media and granular material. The wide opening permits easy filling. Can be filled with hot substances. With easy to read blue graduations. Resistant to heat up to 121 C (for 20 minutes), prolonged use 100 C (ml) Ø ext. Height Neck I-Ø Pk Cat. No. 50 39,00 76,00 24,30 10 215-5681 8,00 V 100 48,50 94,00 24,30 10 215-5682 10,10 V 250 64,50 120,00 30,90 10 215-5683 12,70 V 500 77,50 154,00 39,90 12 215-5684 25,00 V 1000 96,00 205,00 50,80 12 215-5685 38,90 V
y Bottles, Wide Mouth, Square or Rectangualr, with Screw Cap HDPE, translucent or HDPE, brown (2700 ml) with screw cap Space-saving bottles. Wide mouth, easy to fill. Translucent PE ensures good visibility of the level. Screw cap with separate seal for good tightness. Ideal for liquid, solid and powder storage. Models 500, 1000, 2000 and 2700 ml with graduations. Carrying handle for the 2500/2700 ml model. Good chemical resistance, good temperature resistance Capped aseptic or capped ionised (10 kgray) Excellent shock resistance (ml) Form Type Neck I-Ø Cap colour Pk Cat. No. Square Aseptic 37 white 300 215-3028 135,00 V 150 Square Aseptic 37 blue 300 215-3027 135,00 V Square Aseptic 37 red 300 215-3008 154,00 V Square Ionised 37 red 300 215-3009 170,00 V Square Aseptic 37 white 210 215-3017 107,00 V Square Aseptic 37 blue 210 215-3016 107,00 V 250 Square Aseptic 37 red 210 215-3014 107,00 V Square Ionised 37 blue 210 215-3031 121,00 V Square Ionised 37 red 210 215-3015 134,00 V Square Aseptic 58 white 175 215-3023 128,00 V Square Aseptic 58 blue 175 215-3022 128,00 V 500 Square Aseptic 58 red 175 215-3020 129,00 V Square Ionised 58 white 175 215-3032 136,00 V Square Ionised 58 blue 175 215-3024 163,00 V Square Ionised 58 red 175 215-3021 163,00 V Rectangular Aseptic 58 white 90 215-3007 78,90 V Rectangular Aseptic 58 blue 90 215-3006 78,90 V 1000 Rectangular Aseptic 58 red 90 215-3004 79,80 V Rectangular Ionised 58 white 90 215-3026 87,80 V Rectangular Ionised 58 blue 90 215-3025 87,80 V Rectangular Ionised 58 red 90 215-3005 103,00 V Rectangular Aseptic 58 white 50 215-3013 60,50 V Rectangular Aseptic 58 blue 50 215-3011 60,60 V 2000 Rectangular Aseptic 58 red 50 215-3010 61,30 V Rectangular Ionised 58 white 50 215-3030 72,80 V Rectangular Ionised 58 blue 50 215-3029 72,80 V Rectangular Ionised 58 red 50 215-3012 86,00 V 2500 Square Aseptic 88 red 35 215-3018 61,00 V 2700 Rectangular Aseptic 70 white 30 215-3003 56,00 V Rectangular Aseptic 70 red 30 215-3001 41,40 V Storing Pots Kartell PP, white Ideal for keeping instruments, pipettes, thermometers and many other laboratory tools tidy and close to hand. With extra wide base for stability. Very good chemical and temperature resistance Robust, unbreakable Impermeable to liquids Ø int. I-height Ø ext. Outer height (ml) Pk Cat. No. 60 100 98 106,5 230 1 216-1480 10,90 Q 89 190 147 199,7 1100 1 216-1481 15,70 Q
Jars, Wide Mouth, with Screw Cap Funnels with Short Stem Drum Funnels PTFE, strong walled Stable, break-proof construction. Special recessed grips in the cap make it easy to handle. The wide mouth allows easy filling and cleaning. Temperature resistant from 200 to +280 C Exceptionally smooth inner walls to prevent contamination (ml) Ø Cap Height Pk Cat. No. 15 34 34 1 216-0164 8,90 V 30 34 62 1 216-0165 10,80 V 60 60 46 1 216-0166 14,20 V 120 72 62 1 216-0167 19,50 V 240 72 100 1 216-0168 25,40 V 360 90 95 1 216-0169 38,80 V 480 90 125 1 216-0170 42,50 V 1000 110 160 1 216-0171 75,70 V 2200 134 260 1 216-0172 155,00 V PP, transparent With smooth interior surfaces. Autoclavable Suitable for use with standard filter paper Funnel O- Ø Stem O-Ø Stem length Pk Cat. No. 30 5 25 6 221-0152 2,16 F 40 5 35 6 221-0153 3,95 F 50 9 43 1 221-0154 0,52 F 75 10 55 1 221-0155 0,63 F 100 13 77 1 221-0156 1,08 F 120 14 90 1 221-0157 1,50 F 150 17 95 1 221-0158 2,04 F PP or HDPE, transparent For filling containers with large quantities of liquid or powdered substances quickly. Very good (PP) or good (HDPE) chemical resistance Filter insert made from stainless steel /aluminium is available separately for 200 and 250 mm sizes. Quick and easy to clean Funnel O- Stem O-Ø Total height Material Ø Pk Cat. No. 200 22 200 1 221-1411 4,80 F PP 250 30 260 1 221-1412 8,20 F 350 35 440 1 221-1413 17,30 F 400 42 365 1 221-1414 41,50 F HDPE 430 37 420 1 221-1415 55,50 F
y Spatulas, Disposable PP, coloured Multi-purpose, robust and inexpensive tools for collecting, transferring and processing samples of chemical and biological materials. The innovative shape of the spatula allows it to be used as a spatula, a spoon, a scoop, a scraper, a mixing rod or a wiper. Ideal for recovering samples that have been frozen in liquid nitrogen. The Macro type disposable spatulas are 50% larger than standard disposable spatulas. The long shaft makes it easier to pick up material in larger containers. Compliant with FDA standards for applications involving contact with food. Resistant to dilute acids and alkalis Reduced cross-contamination Autoclavable Description Spatulas, disposable Spatulas, disposable, micro, antistatic Spatulas, disposable, macro Length Colour Pk Cat. No. 300 black 300 231-0104 21,80 V 210 green 300 231-0103 21,80 V 140 natural 300 231-0106 23,80 V 310 green 150 231-0105 21,40 V Measuring Scoops PP, white With flat, chamfered ends and reinforced handle., unbreakable Heat resistant up to 130 C, autoclavable The capacity of the scoop is stamped into the handle for easy reading Total length (ml) Pk Cat. No. 60 2 12 231-0326 3,12 F 82 5 12 231-0327 3,48 F 100 10 12 231-2000 4,32 F 135 25 12 231-2001 5,52 F 160 50 12 231-2002 8,16 F 200 100 12 231-2003 12,24 F 260 250 6 231-2004 13,32 F 315 500 6 231-0218 18,90 F 385 1000 6 231-2005 22,80 F Measuring Cylinders Transparent PP, tall form, class B Anti-stick properties mean no loss of liquid: the measured liquid quantity in (ln) is the same as the quantity dispensed (Ex) Large, specially designed hexagonal base for cylinder stability Anti-drop lip Blue moulded graduations DIN 12681, ISO 6706 (ml) Division (ml) Tolerance (± ml) Height Pk Cat. No. 25 0,5 0,5 169 12 612-4401 36,00 V 50 1,0 1,0 199 12 612-4402 41,50 V 100 1,0 1,0 260 12 612-4403 54,30 V 250 2,0 2,0 315 6 612-4404 41,60 V 500 5,0 5,0 350 1 612-4405 9,30 V 1000 10,0 10,0 415 1 612-4406 12,50 V 2000 20,0 20,0 482 1 612-4407 22,60 V
Test Tube Racks PP, coloured Moulded from a single piece, with three shelves. Reagent vessels and sample tubes can be inserted and removed easily, and contents are always clearly visible. With alphanumeric ID of storage positions on the upper level and large labelling areas on the front. Stackable. Excellent chemical resistance Very good thermal resistance, autoclavable Light and flexible No. of holes for tube Ø Colour WxDxH Pk Cat. No. 13 white 202x104x59 1 211-0188 8,20 V 13 blue 202x104x59 1 211-0190 133,00 V 13 red 202x104x59 1 211-0194 133,00 V 72 13 green 202x104x59 1 211-0192 133,00 V 16 white 250x127x70 1 211-0189 8,20 V 16 blue 250x127x70 1 211-0191 133,00 V 16 red 250x127x70 1 211-0195 133,00 V 16 green 250x127x70 1 211-0193 133,00 V Test Tube Racks, Floating Polyester foam Flexible floating racks for use in water baths. Chemically-resistant material Can be washed and reused No. of holes for tubes Colour Form Pk Cat. No. 10x75/16x100/16x125/13x100 anthracite rectangular 6 211-0227 133,00 V 50 15x85/16x100/16x125/16x150 anthracite rectangular 6 211-0228 20,80 V