PROJECT: LOCATION: ARCHITECT: ENGINEER: SALES ENGINEER: DATE: www.fumeavent.com info@fumeavent.com 866-794-1000 Page: HRSO-1 SPRING RETRACTABLE HOSE REEL SPECIFICATION SERIES HRS The vehicle exhaust extraction system shall consist of an Automatic Spring Hose Reel, designed for manual extension and spring return of high temperature flexible exhaust hose. The Hose Reel shall consist of the following features: The hose reel side plate mounting support frame shall be constructed of 11 gauge cold rolled steel. The side plates shall be drawn securely together and retained by heavy gauge "J" channel steel support braces. These support braces keep the side plates square and solid. The hose reel drum shall be constructed of 16 gauge cold rolled steel. The drum shall be formed and rolled to an 18" diameter and strengthened by four inner support bars. These bars are secured to the drum end flanges and pull the drum tightly against the end flange. The drum end flanges shall be constructed of 16 gauge cold rolled steel. The end flange outer edge shall be rolled to provide strength and rigidity. Each end flange shall have a center pressed 18" diameter groove. This groove allows the reel drum and end flange to mate so the drum's inner support bars draw the end flange securely to the drum. This unique design feature offers added strength, quality and reliability. The hose reel shall have a hose to drum connection fitting allowing for use of either 4", 5", 6", or 8" hose. The connection fitting supports an inner 6" or 8" diameter tube that completes the connection from the connection of 6" or 8" diameter discharge duct. The hose reel drum shall also be supplied with a hose tracking bar to guide the hose during the recoiling function. The hose reel function shall consist of a spring cassette housing containing a high carbon drive spring. The activation of the manual extension and spring return is by a Lock and Latch feature. The necessary length of hose desired can be locked in place and the hose is automatically retracted after use. The hose reel functions of uncoiling and recoiling of the hose shall be by direct pulling on the extraction hose. The reel shall have an adjustable hose stop to set the hose at the desired recoiling height. This stop shall be mounted to the extraction hose. 09-07
Air Cleaning Specialists Inc. 826 Horan Drive Fenton, MO 63026 636-349-4400 636-349-0556 Fax
SPRING OPERATED HOSE REELS Date 7/04 Part No.HRS-XXXX Hose Reels TAB 3-C Hose Reel Explained Hose Reel Explained 1. A drum stores the hose securely in place overhead. 2. The hose reel is mounted to a steel beam. 3. The exhaust port can connect to a variety of exhausting methods. 4. Optionally, hose reels can be equipped with a motor or a spring for easy retrieval/storage. 6. The hose (5) easily extends so that the nozzle can attach to the exhaust source. 826 Horan Drive Fenton, MO 63026 and is the property of 800 455-2132 Fax 636 349-0556 Air Cleaning Specialists, Inc. www.fume-a-vent.com info@fume-a-vent.com
Spring Operated Hose Reel Date 7/04 Part No. HRS3-0420 TAB 3-B Shown above: Fume-A-Vent Model HRS3-0420 Spring Hose Reel with 4" x 20' Series 3 400 Silicone Nomex Hose. Plus the optional TPA0303-SC Tailpipe Adapter, Oval Mouth Neoprene for 3" & 4" Neoprene Hose with Spring Clamp The Reels are offered in standard 4", 5", 6" and 8" inch hose diameters. The Reels are supplied completely assembled and ready for installation. The Reels may be connected with ductwork to a central exhaust system or each Reel may be supplied with a direct mount Fan. Fume-A-Vent Hose Reels may be mounted in three positions: from an overhead support structure, or from a side support structure, and on the floor. Ceiling mounts are most common, however wall mounts and floor mounts are options when space is at a premium. 826 Horan Drive Fenton, MO 63026 and is the property of 800 455-2132 Fax 636 349-0556 Air Cleaning Specialists, Inc. www.fume-a-vent.com info@fume-a-vent.com
Fume-A-Vent Direct Mount Fans for Hose Reels Date 7/12 Part No. HRF-XX-X Direct Mounted Fans TAB 12-A This special series of fans feature Direct Mounting onto our Hose Reels, and are constructed of cast aluminum for both the housing and wheel. The wheel is of radial type, professionally balanced. The motor is of TEFC type and is both UL and CSA approved, operating at 3450 RPM. These fans mount with a direct fit onto the hose reels with no adaptor needed. Model HRF-05-1 HRF-05-3 HRF-1-1 HRF-1-3 HRF-1.5-1 HRF-1.5-3 HRF-2-1 HRF-2-3 HRF-3-1 HRF-3-3 Fume-A-Vent Direct Mount Fans for Hose Reels Direct Drive Blower, ½ HP, 1 PH, Direct Mount to Hose Reel Direct Drive Blower, ½ HP, 3 PH, Direct Mount to Hose Reel Direct Drive Blower, 1 HP, 1 PH, Direct Mount to Hose Reel Direct Drive Blower, 1 HP, 3 PH, Direct Mount to Hose Reel Direct Drive Blower, 1½ HP, 1 PH, Direct Mount to Hose Reel Direct Drive Blower, 1½ HP, 3 PH, Direct Mount to Hose Reel Direct Drive Blower, 2 HP, 1 PH, Direct Mount to Hose Reel Direct Drive Blower, 2 HP, 3 PH, Direct Mount to Hose Reel Direct Drive Blower, 3 HP, 1 PH, Direct Mount to Hose Reel Direct Drive Blower, 3 HP, 3 PH, Direct Mount to Hose Reel Wt. 70 70 70 70 75 75 80 80 85 85 Model BLOWER PERFORMANCE CFM RATINGS AT LISTED STATIC PRESSURE HP 1" 2" 3" 4" 5" 6" 7" 8" 9" DBA @ 5" HRF-05-X 0.5 450 435 390 350 260 150 --- --- --- 85 HRF-1-X 1.0 --- --- --- 770 665 540 320 --- --- 83 HRF-1.5-X 1.5 965 910 840 780 675 550 330 --- --- 83 HRF-2-X 2.0 --- --- 1237 1140 1070 990 915 825 735 86 HRF-3-X 3.0 1490 1420 1275 1213 1140 1070 990 915 825 86 826 Horan Drive Fenton, MO 63026 866 455-2132 Fax 636 349-0556 www.fumeavent.com info@fumeavent.com and is the property of Air Cleaning Specialists, Inc.
Fume-A-Vent Type 3 400ºF Polyester Impregnated Rubber Hose Date 7/04 Part No. H-03-XXXX Type 3 Hose 400ºF Hose TAB 1-C The Fume-A-Vent Type 3 Hose ideal is for hose reels, overhead and underground fume extraction systems. Plus welding, industrial use, light-duty material handling, and agricultural use. It is made with high quality polyester impregnated rubber with fully enclosed wire helix. The method of manufacturing is a hot air welding process that does not use any type of adhesives/glues. The hose is manufactured with and additional outer wear strip for protection and longevity. It has good flexibility, good abrasion resistance, and low flow resistance. It is abrasionresistant with strong characteristics against weather, oils and ozone. Flame retardant meeting UL-94 VO and federal motor vehicle MVSS-302 test standards. Both before and after heat testing, the Type 3 Hose tested for an identical rating of 497-pounds on the static pull/stress test. Under a controlled environment, the Type 3 series hose has been tested to withstand up to 550ºF (intermittent use) and 350ºF continuous duty. This product should always be used with the proper tailpipe adapter for your application. Part No Description Wt H-03-0310 Fume-A-Vent 3" x 10' Type 3 400 F Polyester Impregnated Rubber High Temperature Hose 9 H-03-0410 Fume-A-Vent 4" x10' Type 3 400 F Polyester Impregnated Rubber High Temperature Hose 15 H-03-0420 H-03-0425 H-03-0510 Fume-A-Vent 4" x 20' Type 3 400 F Polyester Impregnated Rubber High Temperature Hose Fume-A-Vent 4" x 25' Type 3 400 F Polyester Impregnated Rubber High Temperature Hose Fume-A-Vent 5" x 10' Type 3 400 F Polyester Impregnated Rubber High Temperature Hose 15 18 15 H-03-0520 Fume-A-Vent 5" x 20' Type 3 400 F Polyester Impregnated Rubber High Temperature Hose 16 H-03-0525 H-03-0610 H-03-0620 Fume-A-Vent 5" x 25' Type 3 400 F Polyester Impregnated Rubber High Temperature Hose Fume-A-Vent 6" x 10' Type 3 400 F Polyester Impregnated Rubber High Temperature Hose Fume-A-Vent 6" x 20' Type 3 400 F Polyester Impregnated Rubber High Temperature Hose 18 15 16 H-03-0625 H-03-0810 H-03-0820 H-03-0825 Fume-A-Vent 6" x 25' Type 3 400 F Polyester Impregnated Rubber High Temperature Hose Fume-A-Vent 8" x 10' Type 3 400 F Polyester Impregnated Rubber High Temperature Hose Fume-A-Vent 8" x 20' Type 3 400 F Polyester Impregnated Rubber High Temperature Hose Fume-A-Vent 8" x 25' Type 3 400 F Polyester Impregnated Rubber High Temperature Hose 18 16 17 20 826 Horan Drive Fenton, MO 63026 866 455-2132 Fax 636 349-0556 www.fumeavent.com info@fumeavent.com and dis the property of Air Cleaning Specialists, Inc.
Fume-A-Vent Tailepipe Adaptor TPA 05 Date 7/12 Part No.TPA05-XX-XX-XX Tailpipe Adaptors & Nozzles TAB 10-E Optional Locking Hand Damper Optional Spring Clamp Shown Above: Fume-A-Vent Model TPA 05 06-06-SC-LHD Tailpipe Adapter, Rubber Coated, fits 6" Hose with 6" opening with Optional Spring Clamp and Locking Hand Damper. The TPA Series Adaptors will fit to nealy any exhaust pipe, with optional clamps, dampers and more to fit your specific needs. The TPA 05 features rubber coated pipe to prevent exhaust damage. This is our most popular Tailpipe Adapter. Shown connected to our Type 3 350 Hose TPA 05 Nozzles are available to fit 4" 5" 6" & 8" hose with 4" 5" 6" & 8" opening or mouth. Tailpipe Adaptor Options Code Optional? Description SC Y Spring Clamps VG Y Vise Grips LHD Y Locking Hand Dampers LS Y Lifting Sleeves SCR Y Screens HAN Y Handles 826 Horan Drive Fenton, MO 63026 and is the property of 800 455-2132 Fax 636 349-0556 Air Cleaning Specialists, Inc. www.fumeavent.com info@fumeavent.com
Fume-A-Vent TPA 04 Stainless Steel Tapered Cone Nozzle Date 7/04 Part No. TPA-04-XXXX Tailpipe Adapters & Nozzles TAB 10-D Shown Above: Fume-A-Vent Model TPA04-06 Stainless Steel Tapered Cone Tailpipe Adapter, TPA04 Nozzles are available to fit 4" 5" 6" 8" 10" & 12" Hose. Optional Available: Spring Clamps, Vice Grips, Locking Hand Dampers, Lifting Sleeves, Screens and Handles are available Code SC VG LHD LS SCR HAN Options Spring Clamps Vise Grips Locking Hand Dampers Lifting Sleeves Screens Handles Part No Hose Mouth TPA 04-04 4" 6" TPA 04-05 5" 7" TPA 04-06 6" 8" TPA 04-08 8" 10" TPA 04-10 10" 12" TPA 04-12 12" 14" Length 15" 15" 15" 17" 17" 17" 826 Horan Drive Fenton, MO 63026 866 455-2132 Fax 636 349-0556 www.fumeavent.com info@fumeavent.com and is the property of Air Cleaning Specialists, Inc.
TPA 10 Adapter Nozzles Date 7/04 Part No. TPA10-XX Tailpipe Adapter Nozzles TAB 10-I Shown with Fume-A-Vent Type 6 570ºF High Temperature Hose with plastic coated steel spiral helix. Shown Above Left: Fume-A-Vent TPA10-0606-SC 6 Tailpipe Adapter with 600ºF High Temperature Soft Rubber Nozzle and Spring Clamp. Includes (1) 6 metal sleeve, (1) 6 Bridge Clamp, (1) Worm Gear Hose Clamp and (2) 6 D x 2 Rubber Bands. Shown Above Center: Fume-A-Vent TPA10-0506-SC 5 Hose Connects 6 Tailpipe Adapter with 600ºF High Temperature Soft Rubber Nozzle and Spring Clamp. Includes (1) 5 to 6 metal sleeve, (1) 6 Bridge Clamp, (1) 5 Worm Gear Hose Clamp and (2) 6 D x 2 Rubber Bands. Shown Above Right: Fume-A-Vent TPA10-0404-SC 4 Tailpipe Adapter with 600ºF High Temperature Soft Rubber Nozzle and Spring Clamp. Includes (1) 4 metal sleeve, (1) 4 Bridge Clamp, (1) Worm Gear Hose Clamp and (2) 4 D x 2 Rubber Bands. Model No TPA10-0404-SC TPA10-0506-SC TPA10-0606-SC TPA10-0608-SC TPA10-0808-SC TPA10-0810-SC 0810 TPA10-1010-SC Hose Mouth 4" 4" 5" 6" 6" 6" 6" 8" 8" 8" 8" 10" 10" 10" Description 826 Horan Drive Fenton, MO 63026 866 455-2132 Fax 636 349-0556 www.fumeavent.com info@fumeavent.com and is the property of Air Cleaning Specialists, Inc.