Crea7ion by Wall Mounted Fireplaces// Glammbox 420 Glammbox 420 DF Glammbox 450 Glammbox 450 DF Glammbox 770 Glammbox 770 DF Glammbox 1150 Glammbox 1150 DF Glammbox 1600 Glammbox 1600 DF Glammbox 2150 Glammbox 2150 DF Ignition Mode// Electronic Remote Control OP. Finishings// Painted Black - Black Mirror Crea7ion By The line of perfection It is designed to emphasize the unique and continuous expressions of the flame. Crea7ion is an electronic system with an innovative technology, which stand out its simple design, practical functionality and low consumption. Its structure and solidity ensure a perfectly safe and linear flame, while its ecological character keeps a respecting commitment to the environment, contributing to a pleasant comfort and well-being. Crea7ion can be integrated into virtually any environment or directly in different types of structures (eg.: furniture or masonry). A system totally safe for projects led by architects, decorators and interior designers. Control the pleasure of your fire.
Options 420/Stainless Steel OP. Finishings// Painted Black - Black Mirror 420 DF/Stainless Steel OP. Finishings// Painted Black 450/Stainless Steel OP. Finishings// Painted Black - Black Mirror 450 DF/Stainless Steel OP. Finishings// Painted Black
770/Stainless Steel OP. Finishings// Painted Black - Black Mirror 770 DF/Stainless Steel OP. Finishings// Painted Black 1150/Stainless Steel OP. Finishings// Painted Black - Black Mirror 1150 DF/Stainless Steel OP. Finishings// Painted Black
1600/Stainless Steel OP. Finishings// Painted Black - Black Mirror 1600 DF/Stainless Steel OP. Finishings// Painted Black 2150/Stainless Steel OP. Finishings// Painted Black - Black Mirror 2150 DF/Stainless Steel OP. Finishings// Painted Black
Material Supplied 1. Model «GlammBox CREA7ION.E» 2. Mug; 3. Funnel; 4. Lighter; 5. Hex Key; 6. CO Detector; 7. Protective rim for finishing Wall 1. 2. 3. 4. 5. 6. 7. Components 2 1 1. Fireplace; 2. Tank access door; 3. Combustion fire line; 4. Protection glass; 5. Control valve access door; 6. Lateral part 7. Tank; 8. Control valve. 5 3 4 6 7 8
Installation In order to ensure a safety margin with respect to the ground, it is recommended a minimum distance of 400 mm between the floor and the top of the combustion fire line; The surface on you want to install the burner should be as level as possible. Dimensions: Ensure the hole where you want to place the burner has the following minimum dimensions, as shown in the figure below: GlammBox X Y Z GlammBox X Y Z 420 800 707 358 1150 1550 707 358 420 DF 800 707 375 1150 DF 1550 707 375 450 830 707 358 1600 2038 723 358 450 DF 920 707 375 1600 DF 2038 723 375 770 1150 707 358 2150 2550 723 358 770 DF 1150 707 375 2150 DF 2550 723 375
Flammable materials Do not place flammable materials near the fireplace, within 1m; Racks or shelves should be distant: From fireplaces: 500 mm; From combustion fire lines: 1000 mm; Materials: stone/metal/ceramics A - 150 mm; B - 100 mm; C - 500 mm; Other non-flammable materials A - 200 mm; B - 250 mm; C - 600 mm;
Installation Procedures Very Important: We recommend extreme caution when unpacking your fireplace. Carefully remove the glass from the box. 4 5 1 1. Fireplace; 2. Control valve access door; 3. Protection glass; 4. Side cover access control valve; 5. Tank access door; 2 3 The fireplace allow you to choose the side by which you want to access to the valve. Thus and by default, the access door is located on the front of the fireplace, however you have the possibility of removing the cover (4) and put the door (2) according to the desired configuration.
Insert the supplied batteries into the remote control and electronic controller located on the left side of the fireplace (A), accessing to the tank access door(5). A Very Important: Before starting the assembly of your fireplace, do not forget to put first the base of the supports for the glass. Screw C in B using the key D. B C D
Place the fireplace into the hole previously made (E). Ensure that the fireplace is perfectly level and balanced. If necessary use the fireplace tab holes to get the perfect wall mounting. Make sure your fireplace is level. Choose the type of fastener suitable for the wall material and proceed to the drilling. Tighten the fireplace to the wall properly. Check the stability and levelling. Make adjustments if necessary. E Then apply the plasterboard (F). Do not forget to leave a hole to the control valve access door. F
To make the fixing of glass you should: Place (H) in (I) and screw (J) in order to fix the glass (K). To screw (J), use the supplied key (hex key) (L) G I H J K L
Place the control valve access door. The depth of the door is adjustable depending on the thickness of the wall finishing (M). M If you need to remove the combustion fire line unscrew the 4 screws(n). N
Then unscrew the nut (O). O
Installation Procedures for fireplace with "Protective rim for finishing wall" accessorie If your fireplace has the option of "Protective rim for finishing wall" accessorie, before make the installation step, described on page 10, screwing the rim (N) on fireplace, point the screw (O), put the washer (Q) and tighten the nut (P). Q P O
Ensure that there are 15 mm available for application of Plasterboard/ Wall finishing (S) after place your fireplace on wall (R). R
S
Put the wall finishing (e.g.: plasterboard) (T). T
After the placement of wall finish the mounting gets the aspect that can be seen in (U)(V). After this step return to page 12 and make the assembly step described. U V
Operation Instructions Filling the tank To make the filling of the tank open the tank access door (W) that turns inside the fireplace. Y Z X W AA Attention!!! Before moving the tank to make the filling, unlock it, turning the handle (X) as shown in the figure (AA). Then turn the tank to the outside of the fireplace, using the handle. Open the tank and fill it using the funnel and mug provided. Control the filling thought the fuel sight level. Important Note: Never make the filling when the combustion fire line is burning, nor even if it is warm. If the combustion fire line of fire is hot, please wait for 20 to 30 minutes.
After completing the filling, close the tank, turning it to the inside of the fireplace and leaving it in its initial position. Lock the handle as shown in the figure (BB) and close the tank access door (W). Y Z X W BB
Ignition Light the fireplace: Press A1 + B1 simultaneously After a few seconds will be issue multiple beeps and then it will happen a discharge that will cause the deflagration of the flame. If the deflagration does not occur, make another attempt. If bioethanol is too cold it will be necessary to light using the lighter supplied. For security reasons it is not possible to light the fireplace when combustion fire line is hot, you will need to wait about 20 to 30 minutes. Flame regulation: A1 to increase, C1 to decrease. Switch off: Press B1 After cutting flame may remain small residual flames at the point of fuel inlet for approximately 2 to 10 minutes. At the end of that time the flame becomes extinct completely. A1 B1 C1
Ignition in case of electronic part failure Ignite the fire: Rotate knob D1 counter clockwise (+), after a few seconds ignite with the lighter supplied, once you verify that there is bio-ethanol in the combustion fire line. Flame regulation: (-) to decrease, (+) to increase Switch off: Rotate knob D1 clockwise. Once switched off residual flame near the fuel inlets may remain for approximately 2 to 10 minutes. Afterwards the flame becomes completely extinct. D E1 F1 - +
Levelling of combustion fire line If the flame does not occupy the entire opening will be necessary to level the combustion fire line. Lack of flame on the left: Turn the screw (E) clockwise to clockwise. Parallel turn the screw (E) counter clockwise. Lack of flame on the right side: Turn the screw (E) clockwise to clockwise. Parallel turn the right screw (E) counter clockwise. Repeat the procedure described till to get a uniform flame. Use the key (H1) to perform the entire procedure. E H1
Specifications GlammBox Combustion Fireline(mm) Capacity (litres) Autonomy (hours) Thermal Output (Kw) Area Heating (m²) 420 420 DF 450 250 06:30 1,4 11 450 DF 770 770 DF 1150 1150 DF 1600 1600 DF 2150 2150 DF 3 400 6 2,25 800 3 4,5 1200 03:20 6,75 5 1600 02:30 9 19 38 56 75 Please consider the information provided above as indicative and that it may vary depending on model, installation, bioethanol used and weather conditions.
Overall dimensions Dimensions (mm) GlammBox A B C D E F G 420 348 780 420 753 420 DF 365 450 348 810 450 783 450 DF 365 697 770 348 1130 770 1103 770 DF 365 500 85 1150 348 1530 1150 1483 1150 DF 365 1600 348 2018 1638 1600 DF 365 713 2150 348 2530 2150 2150 DF 365 *dimension in millimetres PT04606-A 1971 2483