GAC/A L(~,;...cji r.h.. hl!i:..jj!.::iji~l f;~"'!~~; A J:h~~i!:; Qf(;;;,;l A~> ~tign Number : AMO -114FH Date: 14 OCT 2018 This certificate is issued to LUFTHANSA TECHNIK PHILIPPINES (LTP) whose primary address and contact information is: VILLAMOR AIR BASE, 1309 PASAY CITY, PHILIPPINES Upon finding that its organization complies in all respects with the requirements of the General Authority of Civil Aviation Regulations relating to the establishment of an Air Agency, and is empowered to operate an approved Repair Station under GACAR Part 145 with the following ratings: Limited Airframe Limited Engines Limited Instrument limited Radio limited Accessories Limited Nondestructive Inspection, Testing, and Processing subject to the conditions and limitations prescribed in the Operations Specifications. This certificate, unless cancelled, suspended, or revoked, shall continue in effect until 14 Oct 2019 This certificate is not transferable and any changes in the basic facilities, or in the location thereof, must be immediately reported to the approriate office of the. By direction of the President YASSIR BIN MANSOORALMAYOOF ASSISTANT PRESIDENT AVIATION STANDARDS GENERAL AUTHORITY OF CIVIL AVIATION KINGDOM OF SAUDI ARABIA GACA-SSAT_AW_C_8000-4_V.O (01 MARCH 2016)
1,11).>.4l i.;,i~<loi.i.ji~i Al. ISSUANCE AND APPLICABILITY. a. These operations specifications are issued to Lufthansa Technik Philippines (L TP) a GACAR Part 145 repair station, certificate number, AM0-114FH. The Repair Station Certificate holder shall conduct operations in accordance with GACAR Part 145 and these operations specifications at the location listed below. The certificate holder's address: Fixed Location: Villamor Air Base, 1309 Pasay City, Philippines Mailing Address: HAM TQ31- Weg beim Jager 193 22335 Hamburg, Germany b. These operations specifications are issued as part of this Repair Station Certificate, and are in effect as of the date signed by the President or his representative. This certificate and operations specifications shall remain in effect until the expiration date, surrendered by the operator, or terminated by the President, whichever comes first. ***** Lufthansa Technik Philippines (L TP) 145.A001-1 Certificate No: AM0-114FH
u>j.>.ilji ui,j+b.ll <Lol..s>.JI <L4&JI 1. Issued by the General Authority of Civil A viatim 2. These Operations Specifications are approved by the President. llgac~ ~f-.>.a.'iuo..,jo.iiut J!~ c...,.olaut~~oo~e,<ricmi.w.i. >a Abdulelah A. K rban ~fr&. Repair Stations-Manager GACA-Aviation Standards 3. I hereby accept and receive the Operations Specifications in this paragraph. fj. Werner Luehmann Head of Regulatory Compliance & Authorities Liaison Lufthansa Technik AG (LHT) Date: 2 C) c?c. i 2c1 ( Lufthansa Technik Philippines (L TP) 145.A001-2 Certificate No: AM0-114FH
llgacj{ <jv.wi ui.j+hu 'LDWI~I A3. RATINGS AND LIMITATIONS a. The certificate holder is authorized to perform maintenance, preventative maintenance and alterations under the limited ratings specified in Table 1 below subject to the provisions of GACAR Part 145 and the limitations specified: Table 1 - Limited Ratin2s Ratings Make Model Limitation A320-214 Airframes AIRBUS SAS A321-211 A330-343 LIMITED TO PREVENTIVE MAINTENANCE, MAINTENANCE UP-TO AND INCLUDING C-CHECK AND MAJOR REPAIRS/ MAJOR ALTERATIONS IN ACCORDANCE WITH CURRENT AIRCRAFT MANUFACTURERS' MAINTENANCE MANUALS, AIR OPERATOR'S MANUALS AND/OR APPROVED DATA ACCEPTABLE TO THE GACA. LIMITED TO PREVENTIVE Airframes BOEING MAINTENANCE, MAINTENANCE UP-TO AND INCLUDING C-CHECK AND MAJOR REPAIRS/ MAJOR ALTERATIONS IN B777-268 ACCORDANCE WITH CURRENT B777-368ER AIRCRAFT MANUFACTURERS' MAINTENANCE MANUALS, AIR OPERATOR'S MANUALS AND/OR APPROVED DATA ACCEPTABLE TO THE GACA. Lufthansa Technik Philippines (L TP) 145. A003- I Certificate No.: AM0-114FH
l[li.>all uij+hlj ClAW I ~I Ratings Make Model Limitation Engines General Electric LIMITED TO PREVENTIVE MAINTENANCE, MINOR REPAIRS AND ENGINE GE90-90B REMOVAL/INSTALLATION IN GE90-115B ACCORDANCE WITH CURRENT AIRCRAFT MANUFACTURERS' MAINTENANCE MANUALS. Engines CFMI CFM56-SB4/3 CFM56-SB3/3 LIMITED TO PREVENTIVE MAINTENANCE, MINOR REPAIRS AND ENGINE REMOVAL/INSTALLATION IN ACCORDANCE WITH CURRENT AIRCRAFT MANUFACTURERS' MAINTENANCE MANUALS. LIMITED TO PREVENTIVE MAINTENANCE, MINOR REPAIRS AND ENGINE Engines ROLLS-ROYCE PLC RB211 TRENT 772B-60 REMOVAL/INSTALLATION IN ACCORDANCE WITH CURRENT AIRCRAFT MANUFACTURERS' MAINTENANCE MANUALS. Lufthansa Technik Philippines (L TP) 145. A003-2 Certificate No. : AM0-114FH
<,!~i"""-'1 ul~ il.ola.jt ilj.i&ll Genl>l'al Authority of Civil Aviation Ratings Make Model Limitation LIMITED TO THOSE INSTRUMENT FROM Lufthansa FROM Lufthansa LISTED IN Lufthansa Technik Technik Philippines Technik Philippines Philippines (LTP) COMPONENT Instrument (LTP) COMPONENT (LTP) COMPONENT CAPABILITY LIST (CCL) FOR CAPABILITY CAPABILITY Workshop MAS LTP ISSUED ON July LIST (CCL) LIST (CCL) 1st, 2018 AS REVISED AND ACCEPTED BY THE GACA. LIMITED TO THOSE RADIOS LISTED FROM Lufthansa FROM Lufthansa IN Lufthansa Technik Philippines Technik Philippines Technik Philippines (LTP) COMPONENT CAPABILITY LIST Radio (LTP) COMPONENT (LTP) COMPONENT (CCL) FOR Workshop MAS LTP CAPABILITY CAPABILITY ISSUED ON July 1st, 2018 AS LIST (CCL) LIST (CCL) REVISED AND ACCEPTED BY THE GACA. Accessories LIMITED TO THOSE ACCESSORIES FROM Lufthansa FROM Lufthansa LISTED IN Lufthansa Technik Technik Philippines Technik Philippines Philippines (LTP) COMPONENT (LTP) COMPONENT (LTP) COMPONENT CAPABILITY LIST (CCL) FOR CAPABILITY CAPABILITY Workshop MAS LTP ISSUED ON July LIST (CCL) LIST (CCL) 1st, 2018 AS REVISED AND ACCEPTED BY THE GACA. Lufthansa Technik Philippines (L TP) 145. A003-3 Certificate No. : AM0-114FH
~llgacj{ y\t.>all uij.i,.b.u CL.ol.a..II"L.4eJI Ratings Make Model Limitations Nondestructive N/A N/A -LIQUID PENETRANT INSPECTION: I.A.W. ASTM-E-1417, OR AS OTHERWISE SPECIFIED Inspection, BY THE MANUFACTURER'S CURRENT TECHNICAL Testing, And DATA AS REVISED. Processing -MAGNETIC PARTICLE INSPECTION: I.A.W. ASTM- E-1444 OR AS OTHERWISE SPECIFIED BY THE MANUFACTURER'S CURRENT TECHNICAL DATA AS REVISED. -EDDY CURRENT TESTING: I.A.W. OEM NTM Procedures OR AS OTHERWISE SPECIFIED BY THE MANUFACTURER'S CURRENT TECHNICAL DATA AS REVISED. -ULTRASONIC INSPECTION: LAW. OEM!\ITM Procedures OR AS OTHERWISE SPECIFIED BY THE MANUFACTURER'S CURRENT TECHNICAL DATA AS REVISED. -RADIOGRAPHIC INSPECTION (RT}: I.A.W. OEM NTM Procedures OR AS OTHERWISE SPECIFIED BY THE MANUFACTURER'S CURRENT TECHNICAL DATA AS REVISED. -THERMOGRAPHY INSPECTION : I.A.W. OEM NTM Procedures OR AS OTHERWISE SPECIFIED BY THE MANUFACTURER'S CURRENT TECHNICAL DATA AS REVISED. ALL NON-DESTRUCTIVE INSPECTION, TESTING, PROCESSING PERSONNEL MUST BE QUALIFIED AND CERTIFIED I.A.W. AIA-NAS-410 OR EN4179. ALL NON-DESTRUCTIVE INSPECTION, TESTING, AND PROCESSING LISTED, MUST BE ACCOMPLISHED IN ACCORDANCE WITH APPROPRIATE AND CURRENT DATA WHICH HAS BEEN APPROVED OR ACCEPTED BY THE GACA/FAA. Lufthansa Technik Philippines (LTP) 145. A003-4 Certificate No.: AM0-114FH
<fs-'411 ul~ <LoWI<L.\\&JI b. The certificate holder is authorized to perform the following specialized services in Table 2 below in accordance with the specified specification and subject to the provisions of GACAR Part 145 and the limitations specified: Table 2 - Limited Ratin~:s. Specialized Services Specialized Service Specification Limitations None - Authorized ***** Lufthansa Technik Philippines (L TP) 145. A003-5 Certificate No. : AM0-114FH
l}ij.>..n.ll ul,l-!hu <LoW I ii-.jwi 1. Issued by the 2. These Operations Specifications are approved by the President. llgacjx }~ Abdulelah A\ Kurban Repair Stations-Manager GACA-Aviatfon Standards 3. I hereby accept and receive the Operations Specifications in this paragraph. Werner Luehmann Head of Regulatory Compliance & Authorities Liaison Lufthansa Technik AG (LHT) Date:.2s t?cr 2..&1 g Lufthansa Technik Philippines (LTP) 145. A003-6 Certificate No.: AM0-114FH
ui>.>aii ul).l,.bll ~WiiW,WI A6. MANAGEMENT AND DESIGNATED PERSONNEL a. The certificate holder is authorized the personnel listed in Table 1 below in the GACAR Part 145 required management and designated positions: Table 1 -Management and Designated Personnel GACA Position Title Name Company Equivalent Position Title Accountable Manager Dr. Thomas Stueger Executive Board Member for Technical Operations, Logistics and IT SMS Management Rep. Rainer Lindau V. P. Quality Management Repair Station Manager Elmar Lutter President and CEO, LTP Person( s) in charge of maintenance (Base I Line) Daniel Hoffmann Jan Pfeil Head ofbusiness Unit Base Maintenance Head of Line Maintenance Manager of Quality Rainer Lindau V. P. Quality Management ***** Lufthansa Technik Philippines (LTP) 145. A006-l AM0-114FH
~llgac~ <]U...UI ul..._wl it..olaji iu,.,&ji 1. Issued by the General Authority of Civil A viatim 2. These Operations Specifications are approved by the President. llgac~...,:.,wivlmhj.l'lot..ii.uwi Genera1Aa\l!orltyo1Civ!1Avia!lon.L~ Repair Statio s-manager \ GACA-Aviati n Standards 3. I hereby accept and receive the Operations Specifications in this paragraph. Werner Luehrnann Head of Regulatory Compliance & Authorities Liaison Lufthansa Technik AG (LHT) Date:.2<; G1c-f"20 ( t Lufthansa Technik Philippines (LTP) 145. A006-2 AM0-114FH