The ICAO Global Air Navigation Plan and the monitoring of ASBU implementation EUROCONTROL LSSIP Kick Off Event 2016 EUROCONTROL, Brussels, Belgium, 11 12 October 2016 11 October 2016 Page 1 ICAO European and North Atlantic Office
Global Air Navigation Plan Strategic Document for regional and national planning for air navigation infrastructure Serves as global guidance for PIRGs Maturity process First developed as global coordinated plan for CNS/ATM Systems in 1992 In 1998 the Global Plan for CNS/ATM systems released In 2006, the Global Plan for Air Navigation Systems was developed Not really a success story so In 2012, revised Global Plan was presented during 12 ANConf that introduced the ASBU methodology with reference to the five major disciplines ATM, CNS, MET, AIM, AGA 11 October 2016 Page 2
Air Navigation Conference 12 Global Air Navigation Plan Global Air Navigation Plan EXCUTIVE VIEW Chapter 1: Global Air Navigation Policy Chapter 2: Near Term Standardization ASBU Block 0 and 1 Chapter 3: Continuing Strategic Planning ASBU Blocks 2 and 3 Chapter 4. Implementation Turning ideas into action Chapter 5: Aviation System Performance: Analysis and Reporting Appendices: 1. GANP Ownership, Overview and Evolution; 2. Hyperlinked Online Support Documentation; 3. Technology Roadmaps; and 4. SARPs Development Planning. 11 October 2016 Page 3
Air Navigation Conference 12 Follow up in the ICAO Assembly A 38 In October 2013, the 38 th Session of the ICAO Assembly adopted Resolution A38 2 on ICAO global planning for safety and air navigation which specifies the roles/responsibilities of States and aviation stakeholders such as: Endorses the first edition of the Global Aviation Safety Plan (GASP) and the fourth edition of the Global Air Navigation Plan (GANP) as the global strategic directions for safety and air navigation, respectively; Resolves that these global plans shall be implemented and kept current in close cooperation and coordination with all concerned stakeholders; Resolves that these global plans shall provide the frameworks in which regional, subregional and national implementation plans will be developed and implemented, thus ensuring harmonization and coordination of efforts aimed at improving international civil aviation safety, capacity and efficiency; Urges Member States to develop sustainable solutions to fully exercise their safety oversight and air navigation responsibilities which can be achieved by sharing resources, utilizing internal and/or external resources, such as regional and sub regional organizations and the expertise of other States; Calls upon States and invites other stakeholders to cooperate in the development and implementation of regional, subregional and national plans based on the frameworks of the GASP and GANP;.. 11 October 2016 Page 4
The GANP and the 39th Assembly The next (5 th ) version of the 2016 2030 GANP Global Air Navigation Plan: Obliges States to map their national or regional programmes against the harmonized GANP, but provides them with far greater certainty of investment. Provides required tools for States and regions to develop comprehensive business case analyses as they seek to realize their specific operational improvements. Provides a vision of the evolution of the Global ATM system and the potential requirements to industry, for better 26 May 2016 anticipation in its products. ICAO EUR/NAT Office 5 11 October 2016 Page 5
ICAO EANPG The implementation of GANP modules, taking into account the Regional Priorities, is a key task of the ICAO Planning and Implementation Regional Groups (PIRGs). The PIRG process will further ensure that all required supporting procedures, regulatory approvals and training capabilities are set in place. These supporting requirements will be reflected in regional online Air Navigation Plans (eanps) developed by the PIRGs, ensuring strategic transparency, coordinated progress and certainty of investment. Enhanced planning perspectives and aglobal framework for performance measurement is required to further support the ASBU implementation activities 11 October 2016 Page 6
EANPG Conclusion EANPG/55 Conclusion 02 Regional planning for ASBU implementation The ASBU Block 0 Modules prioritization table is endorsed as the initial version of the EUR ASBU Implementation Plan; The mechanism for monitoring and reporting the implementation status of Priority 1 Modules, using the combined efforts of EUROCONTROL ESSIP mechanism and the ICAO EUR questionnaire should be used for collecting information for the reporting period 2013 2014; EUROCONTROL is invited to consider extending the scope of the ESSIP/LSSIP reporting tool(s) to the ICAO EUR States outside of the ECAC area; The ASBU Block 0 Modules prioritization table be reviewed on an annual basis and be extended to cover Block 1 Modules, as appropriate 11 October 2016 Page 7
EUROCONTROL and ICAO EUR NAT Office working together For ECAC States there is no double reporting issue as all the information is extracted from ESSIP/LSSIP process For States in the EUR Region reporting burden is limited to a minimum (questionnaire) with specific guidance provided by EUROCONTROL and the EUR/NAT Office (ATMGE) Two reports on ASBU implementation in ICAO EUR Region were prepared, first one for the reference period 2014 and the second for reference period 2015 was recently finalised Very good example of cooperation between two international organisations where already existing mechanisms in the EUR Region were re used to prepare the report for ICAO EANPG 11 October 2016 Page 8
ASBU Implementation Monitoring Report 2015 Was developed by EUROCONTROL and ICAO EUR/NAT Office Uses combined data, from the ESSIP/LSSIP mechanism and the ATMGE questionnaire Gives an overview of the planning dates and implementation progress for the ICAO ASBU Block 0 Modules within the ICAO EUR Region during the reporting year 2015 (reference date Dec 2015) The EANPG invited States to actively support the described ASBU implementation monitoring process and it is a key document for the EANPG to monitor and analyse the implementation within the EUR Region The report is based on the information submitted: by 41 States participating in the ESSIP/LSSIP mechanism Monaco, San Marino and Andorra are considered in hosting States by 8 other States outside that reporting mechanism, using the revised questionnaire 3 States, Algeria, Morocco and Tunisia, did not submit any information on ASBU Block 0 modules implementation progress 11 October 2016 Page 9
ASBU Implementation Monitoring Report 2015 11 October 2016 Page 10
Structure of the report Simple structure to make it easier for the reader to consult and analyse. The introduction (chapter 1) explains the objectives, the background and the geographical scope covered by the report. The two processes used for collection of data are indicated and explained in the following chapter (2). Two main chapters (3 and 4) are addressing and analysing the status of ASBU Block 0 modules implementation Chapter 3 is important because it gives a consolidated view of the planning dates foreseen by States to finalise the implementation of each individual ASBU Block 0 module. Can be considered as a dashboard for ASBU Block 0 modules deployment in the ICAO EUR Region. 11 October 2016 Page 11
Structure of the report Chapter 4 presents a global view on the implementation progress of the ESSIP objectives mapped to each ASBU module Conclusions and Recommendations chapter includes a summary table of an ASBU Block 0 Modules Implementation Dashboard 2015 and a projection of the Completion status rates foreseen to be achieved by the end 2018 ASBU Block 0 Modules Implementation Outlook for 2018. The focus is on the most important observations coming from the report including proposals for required actions from the EANPG so that the integrated implementation of the ASBU modules in the ICAO EUR Region can be further enhanced. 11 October 2016 Page 12
ASBU Block 0 Modules Implementation Dashboard 2015 ASBU B0 Module Number of States Completed by the end of 2015 Not Applicable States Completion by the end of 2015 (%) - Excludes States where the module is Not Applicable ACAS 28 0 54% APTA 6 1 12% DATM 5 0 10% FICE 1 0 2% SNET 20 0 38% SURF 13 16 36% ACDM 5 19 15% ASUR 11 1 21% CDO 17 13 43% FRTO 4 1 8% NOPS 3 0 6% RSEQ 5 18 15% TBO 7 10 16% 11 October 2016 Page 13
ASBU Block 0 Modules Implementation Outlook for 2018 ASBU B0 Module Number of States foreseen to be Completed by the end of 2018 Not Applicable States Completion foreseen by the end of 2018 (%) - Excludes States where the module is Not Applicable ACAS 45 0 87% APTA 39 1 76% DATM 47 0 90% FICE 40 0 77% SNET 40 0 77% SURF 30 16 83% ACDM 27 19 82% ASUR 24 1 47% CDO 33 13 85% FRTO 34 1 66% NOPS 9 0 18% RSEQ 22 18 65% TBO 32 10 76% Report pending EANPG approval Draft available in the distributed memory sticks and at the web site: http://www.eurocontrol.int/sites/default/files/content/documents/officialdocuments/reports/2015 icao report disclaimer.pdf 11 October 2016 Page 14
ICAO EUR ASBU Implementation Monitoring Report Regional Priorities from EANPG/55, to be revised at EANPG/58 for the inclusion of B0 CCO and B0 AMET Reporting is linked to existing mechanisms (ESSIP/LSSIP) and enhanced (ATMGE) questionnaires to avoid double reporting from stakeholders Algeria and Tunisia plan national workshops in 1Q 2016 for submission of their questionnaires into the 2016 reference period Obligation for States to report the status of their ASBU implementation will continue Annual EANPG endorsement Report will be part of eanp Vol III and also be part of the ICAO Global Air Navigation Report 11 October 2016 Page 15
Thank You 11 October 2016 Page 16